ISO 1101:2004
Geometrical Product Specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
ISO 1101:2004 contains basic information and gives requirements for the geometrical tolerancing of workpieces.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$118.26 NZD
|
|
| HardCopy |
$152.17 NZD
|
|
| Networkable PDF |
Price varies
|
Geometrical Product Specifications (GPS) — Geometrical tolerancing — Tolerances of fo...
Contents
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Basic concepts
5 Symbols
6 Tolerance frame
7 Toleranced features
8 Tolerance zones
9 Datums
10 Supplementary indications
11 Theoretically exact dimensions (TED)
12 Restrictive specifications
13 Projected tolerance zone
14 Maximum material requirement
15 Least material requirement
16 Free state condition
17 Interrelationship of geometrical tolerances
18 Definitions of geometrical tolerances
Annex A (informative) - Former practices
Annex B (normative) - Assessment of geometrical deviations
B.1 General
B.2 Straightness
B.3 Flatness
B.4 Roundness
B.5 Cylindricity
Annex C (normative) - Relation to the GPS matrix model
C.1 General
C.2 Information about the standard and its use
C.3 Position in the GPS matrix model
C.4 Related standards
Bibliography
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
Related Information
Similar Standards
-
AS/NZS 1100.501:2002
Technical drawing - Structural engineering drawing
-
BS 1916-1:2009
Limits and fits for engineering, Guide to limits and tolerances
-
BS 1916-2:2009
Limits and fits for engineering, Guide to the selection of fits in BS 1916-1
-
BS 1916-3:2009
Limits and fits for engineering, Guide to tolerances, limits and fits for large diameters
Geometrical Product Specifications (GPS) — Geometrical tolerancing — Tolerances of fo...
Contents
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Basic concepts
5 Symbols
6 Tolerance frame
7 Toleranced features
8 Tolerance zones
9 Datums
10 Supplementary indications
11 Theoretically exact dimensions (TED)
12 Restrictive specifications
13 Projected tolerance zone
14 Maximum material requirement
15 Least material requirement
16 Free state condition
17 Interrelationship of geometrical tolerances
18 Definitions of geometrical tolerances
Annex A (informative) - Former practices
Annex B (normative) - Assessment of geometrical deviations
B.1 General
B.2 Straightness
B.3 Flatness
B.4 Roundness
B.5 Cylindricity
Annex C (normative) - Relation to the GPS matrix model
C.1 General
C.2 Information about the standard and its use
C.3 Position in the GPS matrix model
C.4 Related standards
Bibliography