AS/NZS ISO 3452.1:2023
Non-destructive testing – Penetrant testing, Part 1: General
Standard identically adopts ISO 3452‐1:2021, which specifies a method of penetrant testing used to detect discontinuities.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$139.50 NZD
|
|
| HardCopy |
$155.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS ISO 3452.1:2023 Penetrant testing General principles
Preface
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Safety precautions
5 General principles
5.1 Personnel
5.2 Description of the method
5.3 Process sequence
5.4 Equipment
5.5 Effectiveness
6 Products, sensitivity and designation
6.1 Product family
6.2 Testing products
6.3 Sensitivity
6.4 Designation
7 Compatibility
7.1 General
7.2 Compatibility of penetrant testing products
7.3 Compatibility of penetrant testing products and the material to be tested
8 Test procedure
8.1 Written test procedure
8.2 Precleaning
8.2.1 General
8.2.2 Mechanical precleaning
8.2.3 Chemical precleaning
8.2.4 Drying
8.3 Temperature
8.4 Application of penetrant
8.4.1 Methods of application
8.4.2 Penetration time
8.5 Excess penetrant removal
8.5.1 General
8.5.2 Water
8.5.3 Solvents
8.5.4 Emulsifier
8.5.5 Water and solvent
8.5.6 Excess penetrant removal check
8.5.7 Drying after excess penetrant removal
8.6 Developing
8.6.1 General
8.6.2 Dry developer
8.6.3 Water-suspendable developer
8.6.4 Solvent-based developer
8.6.5 Water soluble developer
8.6.6 Water- or solvent-based for special application (e.g. peelable developer)
8.6.7 No developer (type I only)
8.7 Inspection
8.7.1 General
8.7.2 Viewing conditions
8.7.3 Wipe-off technique
8.7.4 Recording
8.8 Post cleaning and corrosion protection
8.8.1 Post cleaning
8.8.2 Corrosion protection
8.9 Retesting
9 Test report
Annex A (normative) Main stages of standard penetrant examination
Annex B (normative) Process and control tests
Annex C (informative) Example test report
Bibliography
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
Related Information
Similar Standards
-
AS/NZS ISO 3452.2:2023
Non-destructive testing — Penetrant testing, Part 2: Testing of penetrant materials
-
AS/NZS ISO 9712:2023
Non-destructive testing – Qualification and certification of NDT personnel
-
BS 9690-1:2011
Non-destructive testing. Guided wave testing, General guidance and principles
-
BS 9690-2:2011
Non-destructive testing. Guided wave testing, Basic requirements for guided wave testing of pipes, pipelines and structural tubulars
AS/NZS ISO 3452.1:2023 Penetrant testing General principles
Preface
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Safety precautions
5 General principles
5.1 Personnel
5.2 Description of the method
5.3 Process sequence
5.4 Equipment
5.5 Effectiveness
6 Products, sensitivity and designation
6.1 Product family
6.2 Testing products
6.3 Sensitivity
6.4 Designation
7 Compatibility
7.1 General
7.2 Compatibility of penetrant testing products
7.3 Compatibility of penetrant testing products and the material to be tested
8 Test procedure
8.1 Written test procedure
8.2 Precleaning
8.2.1 General
8.2.2 Mechanical precleaning
8.2.3 Chemical precleaning
8.2.4 Drying
8.3 Temperature
8.4 Application of penetrant
8.4.1 Methods of application
8.4.2 Penetration time
8.5 Excess penetrant removal
8.5.1 General
8.5.2 Water
8.5.3 Solvents
8.5.4 Emulsifier
8.5.5 Water and solvent
8.5.6 Excess penetrant removal check
8.5.7 Drying after excess penetrant removal
8.6 Developing
8.6.1 General
8.6.2 Dry developer
8.6.3 Water-suspendable developer
8.6.4 Solvent-based developer
8.6.5 Water soluble developer
8.6.6 Water- or solvent-based for special application (e.g. peelable developer)
8.6.7 No developer (type I only)
8.7 Inspection
8.7.1 General
8.7.2 Viewing conditions
8.7.3 Wipe-off technique
8.7.4 Recording
8.8 Post cleaning and corrosion protection
8.8.1 Post cleaning
8.8.2 Corrosion protection
8.9 Retesting
9 Test report
Annex A (normative) Main stages of standard penetrant examination
Annex B (normative) Process and control tests
Annex C (informative) Example test report
Bibliography
AS/NZS ISO 3452.1:2023
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.