AS/NZS ISO 13918:2020
Welding - Studs and ceramic ferules for arc stud welding
The objective of this Standard is to specify the following: a) Requirements for studs and ceramic ferrules for arc stud welding.(b) Dimensions, materials and mechanical properties. This Standard is identical with, and has been reproduced from, ISO 13918:2017 Welding - Studs and ceramic ferrules for arc stud welding As this document has been reproduced from an International Standard, a full point substitutes for a comma when referring to a decimal marker.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$171.90 NZD
|
|
| HardCopy |
$191.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS ISO 13918:2020 Welding - Studs and ceramic ferrules for arc stud welding
Preface
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Requirements
5.1 Ordering information
5.2 Dangerous substances
5.3 Product requirements
5.3.1 Dimensions and tolerances on dimensions, form and position
5.3.2 Coating
5.3.3 Materials and mechanical characteristics
5.3.4 Weldability
5.4 Durability
6 Dimensions of studs
6.1 General
6.2 Fully-threaded stud (FD)
6.3 Virtually fully-threaded stud (MD)
6.4 Partially threaded stud (PD)
6.5 Threaded stud with reduced shaft (RD)
6.6 Unthreaded stud (UD)
6.7 Insulation pin/nail (ND)
6.8 Stud with internal thread (ID)
6.9 Shear connector (SD)
6.10 Threaded stud with flange (PS)
6.11 Unthreaded stud (US)
6.12 Stud with internal thread (IS)
6.13 Threaded stud (PT)
6.14 Unthreaded stud (UT)
6.15 Stud with internal thread (IT)
7 Dimensions of ceramic ferrules
8 Manufacture
8.1 Fully-threaded stud (FD), virtually fully-threaded stud (MD), partially threaded stud (PD), threaded stud with reduced shaft (RD), unthreaded stud (UD), stud with internal thread (ID)
8.2 Shear connectors (SD)
9 Inspection
9.1 General
9.2 Chemical analysis
9.3 Mechanical tests
9.4 Sample size
10 Marking
10.1 Traceability
10.2 Studs
10.3 Ceramic ferrules
11 Designation
11.1 Studs
11.2 Ceramic ferrules
Bibliography
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 1252.1:2016
High-strength steel fastener assemblies for structural engineering - Bolts, nuts and washers - Part 1: Technical requirements -
AS/NZS 1252.1:2016 A1
High-strength steel fastener assemblies for structural engineering - Bolts, nuts and washers - Part 1: Technical requirements: Amendment 1:2018 -
AS/NZS 1252.2:2016
High-strength steel fastener assemblies for structural engineering - Bolts, nuts and washers - Part 2: Verification testing for bolt assemblies -
AS/NZS 1390:1997
Cup head bolts with ISO metric coarse pitch threads
AS/NZS ISO 13918:2020 Welding - Studs and ceramic ferrules for arc stud welding
Preface
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Requirements
5.1 Ordering information
5.2 Dangerous substances
5.3 Product requirements
5.3.1 Dimensions and tolerances on dimensions, form and position
5.3.2 Coating
5.3.3 Materials and mechanical characteristics
5.3.4 Weldability
5.4 Durability
6 Dimensions of studs
6.1 General
6.2 Fully-threaded stud (FD)
6.3 Virtually fully-threaded stud (MD)
6.4 Partially threaded stud (PD)
6.5 Threaded stud with reduced shaft (RD)
6.6 Unthreaded stud (UD)
6.7 Insulation pin/nail (ND)
6.8 Stud with internal thread (ID)
6.9 Shear connector (SD)
6.10 Threaded stud with flange (PS)
6.11 Unthreaded stud (US)
6.12 Stud with internal thread (IS)
6.13 Threaded stud (PT)
6.14 Unthreaded stud (UT)
6.15 Stud with internal thread (IT)
7 Dimensions of ceramic ferrules
8 Manufacture
8.1 Fully-threaded stud (FD), virtually fully-threaded stud (MD), partially threaded stud (PD), threaded stud with reduced shaft (RD), unthreaded stud (UD), stud with internal thread (ID)
8.2 Shear connectors (SD)
9 Inspection
9.1 General
9.2 Chemical analysis
9.3 Mechanical tests
9.4 Sample size
10 Marking
10.1 Traceability
10.2 Studs
10.3 Ceramic ferrules
11 Designation
11.1 Studs
11.2 Ceramic ferrules
Bibliography
AS/NZS ISO 13918:2020
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.