AS/NZS ISO 11296.3:2023
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks, Part 3: Lining with close-fit pipes
Standard identically adopts ISO 11296 3:2018, which specifies requirements and test methods for close‐fit lining systems used for the renovation of underground non‐pressure drainage and sewerage networks
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$108.90 NZD
|
|
| HardCopy |
$121.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription pricing The cost of your subscription will depend on which standards you want to access, and how many people in your organisation need to be able to access the Online Library subscription at the same time (concurrent users). During your subscription period, we are also able to make any necessary changes and ensure you are aware of any pricing changes that result. For a quote, contact our Online Library team by emailing onlinelibrary@standards.govt.nz. |
AS/NZS ISO 11296.3:2023 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Lining with close-fit pipes
Preface
National Foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
3.1 General
3.2 Techniques
3.3 Characteristics
3.4 Materials
3.5 Product stages
3.6 Service conditions
3.7 Joints
4 Symbols and abbreviated terms
5 Pipes at the “M” stage
5.1 Materials
5.1.1 General
5.1.2 Distinction between PVC-U types
5.1.3 Virgin material
5.1.4 Reprocessable material and recyclable material
5.2 General characteristics
5.2.1 Appearance
5.2.2 Colour
5.3 Material characteristics
5.4 Geometric characteristics
5.5 Mechanical characteristics
5.6 Physical characteristics
5.7 Jointing
5.8 Marking
6 Fittings at the “M” stage
7 Ancillary components
8 Fitness for purpose of the installed lining system at the “I” stage
8.1 Materials
8.2 General characteristics
8.3 Material characteristics
8.4 Geometric characteristics
8.5 Mechanical characteristics
8.6 Physical characteristics
8.7 Additional characteristics
8.8 Sampling
9 Installation practice
9.1 Preparatory work
9.2 Storage, handling and transport of pipes and fittings
9.3 Equipment
9.3.1 Butt fusion equipment and debeading equipment
9.3.2 Reduction equipment
9.3.3 Pipe skids/rollers
9.3.4 Winching and rod-pulling equipment
9.3.5 Pipe entry guides
9.3.6 Reforming equipment
9.3.7 Electrofusion equipment
9.3.8 Inspection equipment
9.3.9 Lifting equipment
9.4 Installation
9.5 Process-related inspection and testing
9.6 Lining termination
9.7 Reconnection to existing manholes and laterals
9.8 Documentation
9.9 Final inspection and testing
Annex A (normative) Factory-folded heat-reverted polyethylene (PE) pipe — Determination of memory ability
Bibliography
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 1254:2010
PVC-U pipes and fittings for stormwater and surface water applications
-
AS/NZS 1254:2010 A1
PVC-U pipes and fittings for stormwater and surface water applications: Amendment 1 -
AS/NZS 1254:2010 A2
PVC-U pipes and fittings for stormwater and surface water applications: Amendment 2 -
AS/NZS 1254:2010 A3
PVC-U pipes and fittings for stormwater and surface water applications: Amendment 3
AS/NZS ISO 11296.3:2023 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Lining with close-fit pipes
Preface
National Foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
3.1 General
3.2 Techniques
3.3 Characteristics
3.4 Materials
3.5 Product stages
3.6 Service conditions
3.7 Joints
4 Symbols and abbreviated terms
5 Pipes at the “M” stage
5.1 Materials
5.1.1 General
5.1.2 Distinction between PVC-U types
5.1.3 Virgin material
5.1.4 Reprocessable material and recyclable material
5.2 General characteristics
5.2.1 Appearance
5.2.2 Colour
5.3 Material characteristics
5.4 Geometric characteristics
5.5 Mechanical characteristics
5.6 Physical characteristics
5.7 Jointing
5.8 Marking
6 Fittings at the “M” stage
7 Ancillary components
8 Fitness for purpose of the installed lining system at the “I” stage
8.1 Materials
8.2 General characteristics
8.3 Material characteristics
8.4 Geometric characteristics
8.5 Mechanical characteristics
8.6 Physical characteristics
8.7 Additional characteristics
8.8 Sampling
9 Installation practice
9.1 Preparatory work
9.2 Storage, handling and transport of pipes and fittings
9.3 Equipment
9.3.1 Butt fusion equipment and debeading equipment
9.3.2 Reduction equipment
9.3.3 Pipe skids/rollers
9.3.4 Winching and rod-pulling equipment
9.3.5 Pipe entry guides
9.3.6 Reforming equipment
9.3.7 Electrofusion equipment
9.3.8 Inspection equipment
9.3.9 Lifting equipment
9.4 Installation
9.5 Process-related inspection and testing
9.6 Lining termination
9.7 Reconnection to existing manholes and laterals
9.8 Documentation
9.9 Final inspection and testing
Annex A (normative) Factory-folded heat-reverted polyethylene (PE) pipe — Determination of memory ability
Bibliography
AS/NZS ISO 11296.3:2023
Online Library subscription pricing
The cost of your subscription will depend on which standards you want to access, and how many people in your organisation need to be able to access the Online Library subscription at the same time (concurrent users). During your subscription period, we are also able to make any necessary changes and ensure you are aware of any pricing changes that result. For a quote, contact our Online Library team by emailing onlinelibrary@standards.govt.nz.