AS/NZS IEC 61084.1:2025
Cable trunking systems and cable ducting systems for electrical installations, Part 1: General requirements
The objective of this document is to specify requirements and tests for cable trunking systems (CTS) and cable ducting systems (CDS) intended for the accommodation, and where necessary for the electrically protective separation, of insulated conductors, cables and possibly other electrical equipment in electrical and/or communication systems installations. The maximum voltage of these installations is 1 000 V AC and 1 500 V DC.
This document does not apply to conduit systems, cable tray systems, cable ladder systems, power track systems or equipment covered by other standards.
This document is an adoption with national modifications, and has been reproduced from, IEC 61084‑1:2017+AMD1:2024 CSV, Cable trunking systems and cable ducting systems for electrical installations - Part 1: General requirements.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$166.05 NZD
|
|
| HardCopy |
$184.50 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 61084.1:2025
SA/SNZ - Cover page
Preface
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
5 General conditions for tests
6 Classification
6.1 According to material
6.2 According to resistance to impact for installation and application
6.2.1 CTS/CDS for impact 0,5 J
6.2.2 CTS/CDS for impact 0,7 J
6.2.3 CTS/CDS for impact 1 J
6.2.4 CTS/CDS for impact 2 J
6.2.5 CTS/CDS for impact 5 J
6.2.6 CTS/CDS for impact 10 J
6.2.7 CTS/CDS for impact 20 J
6.3 According to temperatures as given in Table 1, Table 2 and Table 3 below
6.4 According to resistance to flame propagation
6.4.1 Flame propagating CTS/CDS
6.4.2 Non-flame propagating CTS/CDS
6.5 According to electrical continuity characteristic
6.5.1 CTS/CDS with electrical continuity characteristic
6.5.2 CTS/CDS without electrical continuity characteristic
6.6 According to electrical insulating characteristic
6.6.1 CTS/CDS without electrical insulating characteristic
6.6.2 CTS/CDS with electrical insulating characteristic
6.7 According to degrees of protection provided by enclosure according to IEC 60529:1989
6.7.1 According to protection against ingress of solid foreign objects
6.7.2 According to protection against ingress of water
6.7.3 According to protection against access to hazardous parts
6.8 According to protection against corrosive or polluting substances
6.9 According to the system access cover retention
6.9.1 CTS/CDS access cover, which can be opened without a tool and without a deliberate action
6.9.2 CTS/CDS access cover, which can only be opened with a tool or a deliberate action
6.10 Optional classification according to halogen content
6.10.1 Halogen-free CTS/CDS according to IEC 63355:2022
6.10.2 Not declared
7 Marking and documentation
8 Dimensions
9 Construction
9.1 Sharp edges
9.2 Apparatus mounting
9.3 Means for protective separation and/or retention
9.4 Mechanical connections
9.4.2 Screws intended for re-use shall not be tightened by sudden or jerky motions.
9.5 Accessible conductive parts
9.6 Equipotential bonding
9.7 Access to live parts
9.8 Inlet openings
9.9 Membranes
9.10 Cable restrainer
9.11 Cable anchorage
10 Mechanical properties
10.1 Mechanical strength
10.2 Cable support test
10.3 Impact test
10.3.1 Impact test for storage and transport
10.3.2 Impact test for installation and application
10.4 Linear deflection test
10.5 External load test
10.5.1 Fixing test for apparatus mounting of socket outlets
10.5.2 Fixing test for apparatus mounting other than socket outlets
10.6 System access cover retention
11 Electrical properties
11.1 Electrical continuity
11.1.1 General
11.1.2 Preparation and conditioning
11.1.3 Electrical impedance tests
11.2 Electrical insulation
11.2.1 Solid insulation
11.2.2 Conditioning and preparation
11.2.3 Insulation resistance test
11.2.4 Dielectric strength test
12 Thermal properties
12.1 Resistance to heat
12.1.1 General
12.1.2 Test for non-metallic or composite system components necessary to retain current-carrying parts in position
12.1.3 Test for non-metallic or composite system components not necessary to retain current-carrying parts in position
13 Fire hazard
13.1 Reaction to fire
13.1.1 Initiation of fire
13.1.2 Contribution to fire
13.1.3 Spread of fire
13.1.4 Additional reaction to fire characteristics
13.2 Resistance to fire
14 External influences
14.1 Degree of protection provided by enclosure
14.1.1 General
14.1.2 Protection against ingress of solid foreign objects
14.1.3 Protection against ingress of water
14.1.4 Protection against access to hazardous parts
14.2 Protection against corrosive or polluting substances
15 Electromagnetic compatibility
16 Environmental properties
16.1 Halogen content
Annex A (informative) Types of cable trunking systems (CTS) and cable ducting systems (CDS)
Annex B (normative) CTS/CDS IK code
Bibliography
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 1574:1996
Copper and copper alloys - Wire for electrical purposes
-
AS/NZS 2857:1996
Timber drums for insulated electric cables and bare conductors
-
AS/NZS 4396:1999
Connectors - Insulation piercing - For 0.6/1 kV aerial bundled cables
-
AS/NZS 4703:2007
Electrical wiring in furniture
AS/NZS 61084.1:2025
SA/SNZ - Cover page
Preface
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
5 General conditions for tests
6 Classification
6.1 According to material
6.2 According to resistance to impact for installation and application
6.2.1 CTS/CDS for impact 0,5 J
6.2.2 CTS/CDS for impact 0,7 J
6.2.3 CTS/CDS for impact 1 J
6.2.4 CTS/CDS for impact 2 J
6.2.5 CTS/CDS for impact 5 J
6.2.6 CTS/CDS for impact 10 J
6.2.7 CTS/CDS for impact 20 J
6.3 According to temperatures as given in Table 1, Table 2 and Table 3 below
6.4 According to resistance to flame propagation
6.4.1 Flame propagating CTS/CDS
6.4.2 Non-flame propagating CTS/CDS
6.5 According to electrical continuity characteristic
6.5.1 CTS/CDS with electrical continuity characteristic
6.5.2 CTS/CDS without electrical continuity characteristic
6.6 According to electrical insulating characteristic
6.6.1 CTS/CDS without electrical insulating characteristic
6.6.2 CTS/CDS with electrical insulating characteristic
6.7 According to degrees of protection provided by enclosure according to IEC 60529:1989
6.7.1 According to protection against ingress of solid foreign objects
6.7.2 According to protection against ingress of water
6.7.3 According to protection against access to hazardous parts
6.8 According to protection against corrosive or polluting substances
6.9 According to the system access cover retention
6.9.1 CTS/CDS access cover, which can be opened without a tool and without a deliberate action
6.9.2 CTS/CDS access cover, which can only be opened with a tool or a deliberate action
6.10 Optional classification according to halogen content
6.10.1 Halogen-free CTS/CDS according to IEC 63355:2022
6.10.2 Not declared
7 Marking and documentation
8 Dimensions
9 Construction
9.1 Sharp edges
9.2 Apparatus mounting
9.3 Means for protective separation and/or retention
9.4 Mechanical connections
9.4.2 Screws intended for re-use shall not be tightened by sudden or jerky motions.
9.5 Accessible conductive parts
9.6 Equipotential bonding
9.7 Access to live parts
9.8 Inlet openings
9.9 Membranes
9.10 Cable restrainer
9.11 Cable anchorage
10 Mechanical properties
10.1 Mechanical strength
10.2 Cable support test
10.3 Impact test
10.3.1 Impact test for storage and transport
10.3.2 Impact test for installation and application
10.4 Linear deflection test
10.5 External load test
10.5.1 Fixing test for apparatus mounting of socket outlets
10.5.2 Fixing test for apparatus mounting other than socket outlets
10.6 System access cover retention
11 Electrical properties
11.1 Electrical continuity
11.1.1 General
11.1.2 Preparation and conditioning
11.1.3 Electrical impedance tests
11.2 Electrical insulation
11.2.1 Solid insulation
11.2.2 Conditioning and preparation
11.2.3 Insulation resistance test
11.2.4 Dielectric strength test
12 Thermal properties
12.1 Resistance to heat
12.1.1 General
12.1.2 Test for non-metallic or composite system components necessary to retain current-carrying parts in position
12.1.3 Test for non-metallic or composite system components not necessary to retain current-carrying parts in position
13 Fire hazard
13.1 Reaction to fire
13.1.1 Initiation of fire
13.1.2 Contribution to fire
13.1.3 Spread of fire
13.1.4 Additional reaction to fire characteristics
13.2 Resistance to fire
14 External influences
14.1 Degree of protection provided by enclosure
14.1.1 General
14.1.2 Protection against ingress of solid foreign objects
14.1.3 Protection against ingress of water
14.1.4 Protection against access to hazardous parts
14.2 Protection against corrosive or polluting substances
15 Electromagnetic compatibility
16 Environmental properties
16.1 Halogen content
Annex A (informative) Types of cable trunking systems (CTS) and cable ducting systems (CDS)
Annex B (normative) CTS/CDS IK code
Bibliography
AS/NZS IEC 61084.1:2025
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.