AS/NZS IEC 61000.4.16:2023
Electromagnetic compatibility (EMC), Part 4.16: Testing and measurement techniques—Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
Standard identically adopts IEC 61000 4 16:2015, which establishes a common and reproducible basis for testing electrical and electronic equipment with the application of common mode disturbances to power supply, control, signal and communication ports.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$155.70 NZD
|
|
| HardCopy |
$173.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription pricing The cost of your subscription will depend on which standards you want to access, and how many people in your organisation need to be able to access the Online Library subscription at the same time (concurrent users). During your subscription period, we are also able to make any necessary changes and ensure you are aware of any pricing changes that result. For a quote, contact our Online Library team by emailing onlinelibrary@standards.govt.nz. |
AS/NZS IEC 61000.4.16:2023 Electromagnetic compatibility (EMC) Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
English
CONTENTS
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 General
5 Test levels
5.1 General
5.2 Test levels at mains frequency
5.3 Test levels in the frequency range 15 Hz-150 kHz
6 Test equipment
6.1 Test generators
6.1.1 General
6.1.2 Characteristics and performance of the generator for d.c. tests
6.1.3 Characteristics and performance of the generator for tests at mains frequency: 162/3 Hz, 50 Hz and 60 Hz
6.1.4 Characteristics and performance of the generator for tests in the frequency range 15 Hz to 150 kHz
6.2 Verification of the characteristics of the test generators
6.3 Coupling/decoupling networks
6.3.1 General
6.3.2 Coupling networks
6.3.3 Decoupling devices
7 Test set-up
7.1 General
7.2 Earthing connections
7.3 Equipment under test
7.4 Test generators
7.5 Decoupling/isolation devices
8 Test procedure
8.1 General
8.2 Laboratory reference conditions
8.2.1 General
8.2.2 Climatic conditions
8.2.3 Electromagnetic conditions
8.3 Execution of the test
9 Evaluation of test results
10 Test report
Annex A (informative) Sources of disturbances and coupling mechanisms
A.1 Sources of disturbances
A.2 Coupling mechanisms
Annex B (informative) Selection of test levels
Bibliography
Figures
Figure 1 – Example of equipment ports and configuration
Figure 2 – Profile of the test voltage
Figure 3 – Example of the generator for d.c. and frequency voltage tests 15€Hz up to 150€kHz
Figure 4 – Example of the generator for tests at mains frequency (16⅔ Hz, 50 Hz and 60 Hz)
Figure 5 – Schematic circuit of the coupling T network for communication ports and other ports intended for connection to highly balanced pairs
Figure 6 – Schematic circuit for type tests
Tables
Table 1 – Levels for continuous disturbance
Table 2 – Levels for short duration disturbance
Table 3 – Test levels in the frequency range 15 Hz to 150 kHz
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 61000.2.4:2009
Electromagnetic compatibility (EMC) - Environment - Compatibility levels in industrial plants for low frequency conducted disturbances
-
AS/NZS 61000.4.14:2012
Electromagnetic compatibility (EMC) - Part 4.14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase -
AS/NZS 61000.4.27:2012
Electromagnetic compatibility (EMC) - Part 4.27: Testing and measurement techniques - Unbalance, immunity test for equipment with input current not exceeding 16 A per phase -
AS/NZS 61000.4.34:2012
Electromagnetic compatibility (EMC) - Part 4.34: Testing and measurements techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase
AS/NZS IEC 61000.4.16:2023 Electromagnetic compatibility (EMC) Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
English
CONTENTS
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 General
5 Test levels
5.1 General
5.2 Test levels at mains frequency
5.3 Test levels in the frequency range 15 Hz-150 kHz
6 Test equipment
6.1 Test generators
6.1.1 General
6.1.2 Characteristics and performance of the generator for d.c. tests
6.1.3 Characteristics and performance of the generator for tests at mains frequency: 162/3 Hz, 50 Hz and 60 Hz
6.1.4 Characteristics and performance of the generator for tests in the frequency range 15 Hz to 150 kHz
6.2 Verification of the characteristics of the test generators
6.3 Coupling/decoupling networks
6.3.1 General
6.3.2 Coupling networks
6.3.3 Decoupling devices
7 Test set-up
7.1 General
7.2 Earthing connections
7.3 Equipment under test
7.4 Test generators
7.5 Decoupling/isolation devices
8 Test procedure
8.1 General
8.2 Laboratory reference conditions
8.2.1 General
8.2.2 Climatic conditions
8.2.3 Electromagnetic conditions
8.3 Execution of the test
9 Evaluation of test results
10 Test report
Annex A (informative) Sources of disturbances and coupling mechanisms
A.1 Sources of disturbances
A.2 Coupling mechanisms
Annex B (informative) Selection of test levels
Bibliography
Figures
Figure 1 – Example of equipment ports and configuration
Figure 2 – Profile of the test voltage
Figure 3 – Example of the generator for d.c. and frequency voltage tests 15€Hz up to 150€kHz
Figure 4 – Example of the generator for tests at mains frequency (16⅔ Hz, 50 Hz and 60 Hz)
Figure 5 – Schematic circuit of the coupling T network for communication ports and other ports intended for connection to highly balanced pairs
Figure 6 – Schematic circuit for type tests
Tables
Table 1 – Levels for continuous disturbance
Table 2 – Levels for short duration disturbance
Table 3 – Test levels in the frequency range 15 Hz to 150 kHz
Previous versions
AS/NZS IEC 61000.4.16:2023
Online Library subscription pricing
The cost of your subscription will depend on which standards you want to access, and how many people in your organisation need to be able to access the Online Library subscription at the same time (concurrent users). During your subscription period, we are also able to make any necessary changes and ensure you are aware of any pricing changes that result. For a quote, contact our Online Library team by emailing onlinelibrary@standards.govt.nz.