AS/NZS CISPR 14.2:2021
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus, Part 2: Immunity - Product family standard
AS/NZS CISPR 14.2:2021 adopts CISPR 14-2:2020 with modifications for Australia and New Zealand, which to specify the electromagnetic immunity requirements in the frequency range 0 Hz to 400 GHz that apply to appliances, electric tools and similar apparatus as specified below, whether powered by AC or DC (including a battery).
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$100.80 NZD
|
|
| HardCopy |
$112.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS CISPR 14.2:2021 Requirements for household appliances, electric tools and similar apparatus Immunity -- Product family standard (CISPR 14-2:2020 (ED 3.0) MOD)
CONTENTS
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
3.1 General
3.2 General terms and definitions
3.3 Abbreviated terms
4 Classification of apparatus
5 Tests
5.1 Electrostatic discharge
5.2 Fast transients
5.3 Injected currents, 0,15 MHz to 230 MHz
5.4 Injected currents, 0,15€MHz to 80€MHz
5.5 Radio frequency electromagnetic fields, 80€MHz to 6€GHz
5.6 Surges
5.7 Voltage dips
6 Performance criteria
7 Applicability of immunity tests
7.1 General
7.2 Application of tests for the different categories of apparatus
7.2.1 General
7.2.2 Category I
7.2.3 Category II
7.2.4 Category III
7.2.5 Category IV
7.2.6 Category V
7.2.7 Exceptions
8 Test conditions
8.1 General
8.2 Mains operation
8.2.1 Voltage at the AC mains port
8.2.2 Frequency at the AC mains port
8.3 DC operation
8.3.1 Battery operation
8.3.2 Operation from a DC supply other than a battery
8.4 Specific test conditions
8.4.1 Control settings
8.4.2 Auxiliary equipment
8.4.3 Specific equipment
8.5 Test procedures
8.6 Multifunction equipment
8.7 Equipment with built-in lighting function
8.8 Equipment incorporating radio functions
9 Compliance with this publication
10 Test uncertainty
11 Test report
Annex€A (informative)Guidance for permissible degradation
Bibliography
Figures
Figure 1 – Examples of ports
Figure 2 – Example for a test set-up for large EUTs (e.g. refrigerators) where the cable leaves the EUT on a height of more than 1€m above the floor
Tables
Table 1 – Enclosure port
Table€2 – Signal ports, control ports and wired network ports
Table 3 – Input and output DC power ports
Table 4 – Input and output AC power ports
Table 5 – Signal ports, control ports and wired network ports
Table 6 – Input and output DC power ports
Table 7 – Input and output AC power ports
Table 8 – Signal ports, control ports and wired network ports
Table 9 – Input and output DC power ports
Table 10 – Input and output AC power ports
Table 11 – Enclosure ports
Table 12 – Input AC power ports
Table 13 – Wired network ports
Table 14 – Input AC power ports
Table 15 – Immunity tests applicable to Category II
Table€16 – Immunity tests applicable to Category III
Table 17 – Immunity tests applicable to Category IV
Table 18 – Immunity tests applicable to Category V
Table A.1 – Examples of degradations
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 61000.2.4:2009
Electromagnetic compatibility (EMC) - Environment - Compatibility levels in industrial plants for low frequency conducted disturbances
-
AS/NZS 61000.3.4:2007
Electromagnetic compatibility (EMC) - Limits - Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 75 A
-
AS/NZS 61000.4.20:2023
Electromagnetic compatibility (EMC), Part 4.20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides (IEC 61000-4-20:2022 (ED. 3.0) MOD)
-
AS/NZS 61000.4.7:2012
Electromagnetic compatibility (EMC) - Part 4.7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto
AS/NZS CISPR 14.2:2021 Requirements for household appliances, electric tools and similar apparatus Immunity -- Product family standard (CISPR 14-2:2020 (ED 3.0) MOD)
CONTENTS
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
3.1 General
3.2 General terms and definitions
3.3 Abbreviated terms
4 Classification of apparatus
5 Tests
5.1 Electrostatic discharge
5.2 Fast transients
5.3 Injected currents, 0,15 MHz to 230 MHz
5.4 Injected currents, 0,15€MHz to 80€MHz
5.5 Radio frequency electromagnetic fields, 80€MHz to 6€GHz
5.6 Surges
5.7 Voltage dips
6 Performance criteria
7 Applicability of immunity tests
7.1 General
7.2 Application of tests for the different categories of apparatus
7.2.1 General
7.2.2 Category I
7.2.3 Category II
7.2.4 Category III
7.2.5 Category IV
7.2.6 Category V
7.2.7 Exceptions
8 Test conditions
8.1 General
8.2 Mains operation
8.2.1 Voltage at the AC mains port
8.2.2 Frequency at the AC mains port
8.3 DC operation
8.3.1 Battery operation
8.3.2 Operation from a DC supply other than a battery
8.4 Specific test conditions
8.4.1 Control settings
8.4.2 Auxiliary equipment
8.4.3 Specific equipment
8.5 Test procedures
8.6 Multifunction equipment
8.7 Equipment with built-in lighting function
8.8 Equipment incorporating radio functions
9 Compliance with this publication
10 Test uncertainty
11 Test report
Annex€A (informative)Guidance for permissible degradation
Bibliography
Figures
Figure 1 – Examples of ports
Figure 2 – Example for a test set-up for large EUTs (e.g. refrigerators) where the cable leaves the EUT on a height of more than 1€m above the floor
Tables
Table 1 – Enclosure port
Table€2 – Signal ports, control ports and wired network ports
Table 3 – Input and output DC power ports
Table 4 – Input and output AC power ports
Table 5 – Signal ports, control ports and wired network ports
Table 6 – Input and output DC power ports
Table 7 – Input and output AC power ports
Table 8 – Signal ports, control ports and wired network ports
Table 9 – Input and output DC power ports
Table 10 – Input and output AC power ports
Table 11 – Enclosure ports
Table 12 – Input AC power ports
Table 13 – Wired network ports
Table 14 – Input AC power ports
Table 15 – Immunity tests applicable to Category II
Table€16 – Immunity tests applicable to Category III
Table 17 – Immunity tests applicable to Category IV
Table 18 – Immunity tests applicable to Category V
Table A.1 – Examples of degradations
Previous versions
AS/NZS CISPR 14.2:2021
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.