AS/NZS 5125.1:2014
Heat pump water heaters - Performance assessment - Part 1: Air source heat pump water heaters
To provide a means of evaluating the annual task performance of air source heat pump water heating systems. The main purpose of this revision is to introduce a performance test for assessing the performance against minimum performance requirements for heat pump water heaters.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$155.70 NZD
|
|
| HardCopy |
$173.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 5125.1:2014 HEAT PUMP WATER HEATERS-PERFORMANCE ASSESSMENT - AIR SOURCE HEAT PUMP WATER HEATERS
PREFACE
CONTENTS
SECTION 1 SCOPE AND APPLICATION
1.1 SCOPE
1.2 APPLICATION
1.3 REFERENCED DOCUMENTS
1.4 DEFINITIONS
1.4.1 Auxiliary boosting
1.4.2 Electrical power input
1.4.3 Heat pump water heater
1.4.4 Integral heat pump
1.4.5 Moving average
1.4.6 Recharge period
1.4.7 Recharge rate
1.4.8 Stand-alone heat pump
1.4.9 Standby electrical power
1.4.10 Test point period
1.4.11 Thermal capacity
1.4.12 Thermostat cut in
1.4.13 Thermostat cut out
1.5 NOTATION
SECTION 2 TEST CONDITIONS
2.1 SCOPE OF SECTION
2.2 TEST CHAMBER
2.3 PRODUCT INSTALLATION
2.4 STAND-ALONE HEAT PUMP OPERATION
2.5 SENSORS AND MEASUREMENTS
2.5.1 Temperature sensors
2.5.2 Electrical power
2.5.3 Stand-by electrical power
2.5.4 Stand-alone heat pump flow rate
SECTION 3 TEST PROCEDURE
3.1 SCOPE OF SECTION
3.2 TEST CONDITIONS
3.2.1 General
3.2.2 Maximum heat pump operating temperature during test
3.3 TEST POINT PERIOD
3.4 MEASUREMENTS
SECTION 4 CALCULATIONS
4.1 SCOPE OF SECTION
4.2 SELECTION OF TEST POINT PERIODS
4.3 THERMAL CAPACITY
4.4 COEFFICIENT OF PERFORMANCE
4.5 DATA CORRELATION
4.5.1 General
4.5.2 Stand-alone heat pump flow rate
4.5.3 Test point data selection
SECTION 5 LOW TEMPERATURE PERFORMANCE
5.1 SCOPE OF SECTION
5.2 LOW TEMPERATURE CLASSIFICATION
5.3 LOW TEMPERATURE PERFORMANCE TEST
5.3.1 Requirement
5.3.2 Low temperature Class A heat pumps
5.3.3 Low temperature operation penalty
5.3.4 Low temperature Class B heat pumps
SECTION 6 REPORTING
6.1 SCOPE OF SECTION
6.2 PRODUCT DESCRIPTION
6.3 DATA REPORTING
6.3.1 One minute data
6.3.2 Test period data
6.3.3 Calculated values
6.3.4 Regression coefficients
APPENDIX A - TEST CHAMBER AND INSTRUMENTATION
A1 SCOPE
A2 TEST CHAMBER
A2.1 General
A2.2 Air temperature and circulation
A2.3 Water properties
A2.4 Radiation
A2.5 Electricity supply
A2.6 Water supply
A3 PRODUCT INSTALLATION
A3.1 General
A3.2 Location of temperature sensors in the storage tank
A3.3 Location of temperature sensors in stand-alone heat pump systems
A3.4 Tank mixing in stand-alone heat pump systems
A4 MEASUREMENT ACCURACY
A4.1 Air temperature
A4.2 Water temperature
A4.3 Calibration range
A4.4 Flow rate
A4.5 Electrical power and energy consumption
APPENDIX B - REGRESSION
APPENDIX C - PROPERTIES OF WATER
APPENDIX D - ERRORS
D1 SCOPE
D2 ERROR IN DETERMINATION OF THERMAL CAPACITY
D3 ERROR IN DETERMINATION OF COP
APPENDIX E - CONFIGURATION AND DETERMINATION OF TIME CONSTANT FOR AIR TEMPERATURE SENSORS
E1 SCOPE
E2 PRINCIPLE-MEASUREMENT OF AIR TEMPERATURE
E3 CONFIGURATION OF AIR TEMPERATURE SENSOR
E4 AIR TEMPERATURE SENSOR TIME CONSTANT
APPENDIX F - DATA REPORTING
F1 SCOPE
F2 TEST LABORATORY
F3 PRODUCT DESCRIPTION
F3.1 General
F3.2 Photograph of product under test
F3.3 Schematic drawings of product construction
F4 TEST POINT PERIOD AVERAGE MEASURED DATA
F5 TEST POINT PERIOD CALCULATED VALUES
F6 REGRESSION COEFFICIENTS
F6.1 General
F6.2 Comparison of calculated and regression values of COP and Power
F7 LOW TEMPERATURE OPERATION PENALTY
APPENDIX G - PERFORMANCE RATING TAPPING CYCLE TEST METHOD
G1 SCOPE
G2 TEST CHAMBER AND INSTRUMENTATION
G2.1 General
G2.2 Water temperature
G2.3 Water flow rate
G2.4 Mass of water withdrawn
G3 PRODUCT INSTALLATION
G3.1 Water pressure
G3.2 Heat pump
G4 PERFORMANCE TEST
G4.1 Scope
G4.2 Test conditions
G4.3 Test procedure
G4.4 Measurements
G5 CALCULATIONS
G5.1 General
G5.2 Daily useful energy output and electricity consumption
G5.3 Coefficient of performance
G5.4 Standardized volumetric recharge rate
G6 REPORTING
G6.1 General
G6.2 Calculated data
G6.3 Test data
Previous versions
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
References
Heated water systems - Calculation of energy consumption
Related Information
Similar Standards
-
AS/NZS 4234 Sup 1:2021
Heated water systems - Calculation of energy consumption-Parameters and outcomes for software simulations (Supplement to AS/NZS 4234:2021)
-
AS/NZS 4234:2021
Heated water systems - Calculation of energy consumption
-
AS/NZS 4692.1:2005
Electric water heaters - Energy consumption, performance and general requirements
-
AS/NZS 4692.1:2005 A1
Electric water heaters - Energy consumption, performance and general requirements: Amendment 1
AS/NZS 5125.1:2014 HEAT PUMP WATER HEATERS-PERFORMANCE ASSESSMENT - AIR SOURCE HEAT PUMP WATER HEATERS
PREFACE
CONTENTS
SECTION 1 SCOPE AND APPLICATION
1.1 SCOPE
1.2 APPLICATION
1.3 REFERENCED DOCUMENTS
1.4 DEFINITIONS
1.4.1 Auxiliary boosting
1.4.2 Electrical power input
1.4.3 Heat pump water heater
1.4.4 Integral heat pump
1.4.5 Moving average
1.4.6 Recharge period
1.4.7 Recharge rate
1.4.8 Stand-alone heat pump
1.4.9 Standby electrical power
1.4.10 Test point period
1.4.11 Thermal capacity
1.4.12 Thermostat cut in
1.4.13 Thermostat cut out
1.5 NOTATION
SECTION 2 TEST CONDITIONS
2.1 SCOPE OF SECTION
2.2 TEST CHAMBER
2.3 PRODUCT INSTALLATION
2.4 STAND-ALONE HEAT PUMP OPERATION
2.5 SENSORS AND MEASUREMENTS
2.5.1 Temperature sensors
2.5.2 Electrical power
2.5.3 Stand-by electrical power
2.5.4 Stand-alone heat pump flow rate
SECTION 3 TEST PROCEDURE
3.1 SCOPE OF SECTION
3.2 TEST CONDITIONS
3.2.1 General
3.2.2 Maximum heat pump operating temperature during test
3.3 TEST POINT PERIOD
3.4 MEASUREMENTS
SECTION 4 CALCULATIONS
4.1 SCOPE OF SECTION
4.2 SELECTION OF TEST POINT PERIODS
4.3 THERMAL CAPACITY
4.4 COEFFICIENT OF PERFORMANCE
4.5 DATA CORRELATION
4.5.1 General
4.5.2 Stand-alone heat pump flow rate
4.5.3 Test point data selection
SECTION 5 LOW TEMPERATURE PERFORMANCE
5.1 SCOPE OF SECTION
5.2 LOW TEMPERATURE CLASSIFICATION
5.3 LOW TEMPERATURE PERFORMANCE TEST
5.3.1 Requirement
5.3.2 Low temperature Class A heat pumps
5.3.3 Low temperature operation penalty
5.3.4 Low temperature Class B heat pumps
SECTION 6 REPORTING
6.1 SCOPE OF SECTION
6.2 PRODUCT DESCRIPTION
6.3 DATA REPORTING
6.3.1 One minute data
6.3.2 Test period data
6.3.3 Calculated values
6.3.4 Regression coefficients
APPENDIX A - TEST CHAMBER AND INSTRUMENTATION
A1 SCOPE
A2 TEST CHAMBER
A2.1 General
A2.2 Air temperature and circulation
A2.3 Water properties
A2.4 Radiation
A2.5 Electricity supply
A2.6 Water supply
A3 PRODUCT INSTALLATION
A3.1 General
A3.2 Location of temperature sensors in the storage tank
A3.3 Location of temperature sensors in stand-alone heat pump systems
A3.4 Tank mixing in stand-alone heat pump systems
A4 MEASUREMENT ACCURACY
A4.1 Air temperature
A4.2 Water temperature
A4.3 Calibration range
A4.4 Flow rate
A4.5 Electrical power and energy consumption
APPENDIX B - REGRESSION
APPENDIX C - PROPERTIES OF WATER
APPENDIX D - ERRORS
D1 SCOPE
D2 ERROR IN DETERMINATION OF THERMAL CAPACITY
D3 ERROR IN DETERMINATION OF COP
APPENDIX E - CONFIGURATION AND DETERMINATION OF TIME CONSTANT FOR AIR TEMPERATURE SENSORS
E1 SCOPE
E2 PRINCIPLE-MEASUREMENT OF AIR TEMPERATURE
E3 CONFIGURATION OF AIR TEMPERATURE SENSOR
E4 AIR TEMPERATURE SENSOR TIME CONSTANT
APPENDIX F - DATA REPORTING
F1 SCOPE
F2 TEST LABORATORY
F3 PRODUCT DESCRIPTION
F3.1 General
F3.2 Photograph of product under test
F3.3 Schematic drawings of product construction
F4 TEST POINT PERIOD AVERAGE MEASURED DATA
F5 TEST POINT PERIOD CALCULATED VALUES
F6 REGRESSION COEFFICIENTS
F6.1 General
F6.2 Comparison of calculated and regression values of COP and Power
F7 LOW TEMPERATURE OPERATION PENALTY
APPENDIX G - PERFORMANCE RATING TAPPING CYCLE TEST METHOD
G1 SCOPE
G2 TEST CHAMBER AND INSTRUMENTATION
G2.1 General
G2.2 Water temperature
G2.3 Water flow rate
G2.4 Mass of water withdrawn
G3 PRODUCT INSTALLATION
G3.1 Water pressure
G3.2 Heat pump
G4 PERFORMANCE TEST
G4.1 Scope
G4.2 Test conditions
G4.3 Test procedure
G4.4 Measurements
G5 CALCULATIONS
G5.1 General
G5.2 Daily useful energy output and electricity consumption
G5.3 Coefficient of performance
G5.4 Standardized volumetric recharge rate
G6 REPORTING
G6.1 General
G6.2 Calculated data
G6.3 Test data
Previous versions
AS/NZS 5125.1:2014
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.