AS/NZS 4755.3.2:2012
Demand response capabilities and supporting technologies for electrical products - Part 3.2: Interaction of demand response enabling devices and electrical products - Operational instructions and connections for devices controlling swimming pool pump-uni
Defines a set of operational instructions that will meet the requirements of remote agents wishing to control the energy consumption of pump-units, and establishes a consistent approach to the method of connecting the demand response interface to the demand response enabling device (DRED).
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$132.30 NZD
|
|
| HardCopy |
$147.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 4755.3.2:2012 DEMAND RESPONSE CAPABILITIES AND SUPPORTING TECHNOLOGIES FOR ELECTRICAL PRODUCTS - INTERACTION OF...
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 REFERENCED DOCUMENTS
1.3 DEFINITIONS
1.3.1 Asserted
1.3.2 Automatic override
1.3.3 Circumvention device
1.3.4 Demand response (DR)
1.3.5 Demand response capability
1.3.6 Demand response enabling device (DRED)
1.3.7 Demand response event
1.3.8 Demand response interface
1.3.9 Demand response mode (DRM)
1.3.10 Design
1.3.11 Electrical product
1.3.12 Extra low voltage
1.3.13 Filtration pump-unit
1.3.14 Input energy
1.3.15 Input power
1.3.16 Integral pump-unit controller
1.3.17 Manual override
1.3.18 Model
1.3.19 Normal operation
1.3.20 Operational instruction
1.3.21 Original user settings
1.3.22 Pool equipment
1.3.23 Pump-unit
1.3.24 Pump-unit controller
1.3.25 Remote agent
1.3.26 RJ45 connector
1.3.27 Run-time adjustment
1.3.28 Sanitization controller
1.3.29 Scheduled off-time
1.3.30 Scheduled on-time
1.3.31 Safety extra-low voltage (SELV)
1.3.32 Separate pump-unit controller
1.3.33 Shall
1.3.34 Should
1.3.35 Switch
1.3.36 User
SECTION 2 OPERATIONAL INSTRUCTIONS AND DEMAND RESPONSE MODES
2.1 GENERAL PRINCIPLES
2.2 DEMAND RESPONSE MODES
2.3 MANUAL OVERRIDE
2.4 AUTOMATIC OVERRIDE
2.5 RESPONSE TIMES
2.6 OPERATION OF AUXILIARY EQUIPMENT
2.7 RUN-TIME ADJUSTMENT
2.8 STANDBY POWER
SECTION 3 INTERFACES
3.1 GENERAL
3.2 PHYSICAL INTERFACES
3.3 TERMINAL BLOCK
3.3.1 Terminal block pin assignments
3.3.2 Terminal block specifications
3.4 RJ45 SOCKET
3.4.1 RJ45 socket pin assignment
3.4.2 RJ45 socket specifications
3.5 CIRCUIT TO DRED
3.6 OPTIONAL ELECTRICAL SUPPLY
3.7 LOCATION AND ACCESS
SECTION 4 LABELLING AND MARKING OF DEMAND RESPONSE CAPABILITY
4.1 GENERAL
4.2 REGISTRATION
4.3 POINT OF SALE LABELLING
4.4 MARKING
4.5 MANUFACTURER'S LITERATURE
SECTION 5 TESTING AND VERIFYING DEMAND RESPONSE CAPABILITY
5.1 VERIFICATION OF CLAIMED DEMAND RESPONSE CAPABILITY
5.2 SET-UP FOR TESTING
5.3 VERIFICATION OF CLAIMED COMPLIANCE WITH DRM 1
5.3.1 Sequence of operations
5.3.2 Integral pump-unit controller
5.3.3 Separate pump-unit controller
5.4 VERIFICATION OF CLAIMED COMPLIANCE WITH DRM 2
5.4.1 Integral pump-unit controller
5.4.2 Separate pump-unit controller
5.5 VERIFICATION OF CLAIMED COMPLIANCE WITH DRM 4
5.5.1 Interrupting operation during a DRM 4 event
5.5.2 Switching on during a DRM 4 event
5.6 TEST REPORT
APPENDIX A - REGISTRATION INFORMATION FOR PUMP-UNIT CONTROLLERS
APPENDIX B - VERIFICATION OF CLAIMED DEMAND RESPONSE CAPABILITY FOR PUMP-UNIT CONTROLLERS, IN ACCORDANCE WITH AS/NZS 47553.2
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
Related Information
Similar Standards
-
AS/NZS 4325.1:1995
Compression and mechanical connectors for power cables with copper or aluminium conductors - Test methods and requirements
-
AS/NZS 4325.1:1995 A1
Compression and mechanical connectors for power cables with copper or aluminium conductors - Test methods and requirements: Amendment 1
-
AS/NZS 4396:1999
Connectors - Insulation piercing - For 0.6/1 kV aerial bundled cables
-
AS/NZS 4437:1996
Solderless crimped connections - General requirements, test methods and practical guidance
AS/NZS 4755.3.2:2012 DEMAND RESPONSE CAPABILITIES AND SUPPORTING TECHNOLOGIES FOR ELECTRICAL PRODUCTS - INTERACTION OF...
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 REFERENCED DOCUMENTS
1.3 DEFINITIONS
1.3.1 Asserted
1.3.2 Automatic override
1.3.3 Circumvention device
1.3.4 Demand response (DR)
1.3.5 Demand response capability
1.3.6 Demand response enabling device (DRED)
1.3.7 Demand response event
1.3.8 Demand response interface
1.3.9 Demand response mode (DRM)
1.3.10 Design
1.3.11 Electrical product
1.3.12 Extra low voltage
1.3.13 Filtration pump-unit
1.3.14 Input energy
1.3.15 Input power
1.3.16 Integral pump-unit controller
1.3.17 Manual override
1.3.18 Model
1.3.19 Normal operation
1.3.20 Operational instruction
1.3.21 Original user settings
1.3.22 Pool equipment
1.3.23 Pump-unit
1.3.24 Pump-unit controller
1.3.25 Remote agent
1.3.26 RJ45 connector
1.3.27 Run-time adjustment
1.3.28 Sanitization controller
1.3.29 Scheduled off-time
1.3.30 Scheduled on-time
1.3.31 Safety extra-low voltage (SELV)
1.3.32 Separate pump-unit controller
1.3.33 Shall
1.3.34 Should
1.3.35 Switch
1.3.36 User
SECTION 2 OPERATIONAL INSTRUCTIONS AND DEMAND RESPONSE MODES
2.1 GENERAL PRINCIPLES
2.2 DEMAND RESPONSE MODES
2.3 MANUAL OVERRIDE
2.4 AUTOMATIC OVERRIDE
2.5 RESPONSE TIMES
2.6 OPERATION OF AUXILIARY EQUIPMENT
2.7 RUN-TIME ADJUSTMENT
2.8 STANDBY POWER
SECTION 3 INTERFACES
3.1 GENERAL
3.2 PHYSICAL INTERFACES
3.3 TERMINAL BLOCK
3.3.1 Terminal block pin assignments
3.3.2 Terminal block specifications
3.4 RJ45 SOCKET
3.4.1 RJ45 socket pin assignment
3.4.2 RJ45 socket specifications
3.5 CIRCUIT TO DRED
3.6 OPTIONAL ELECTRICAL SUPPLY
3.7 LOCATION AND ACCESS
SECTION 4 LABELLING AND MARKING OF DEMAND RESPONSE CAPABILITY
4.1 GENERAL
4.2 REGISTRATION
4.3 POINT OF SALE LABELLING
4.4 MARKING
4.5 MANUFACTURER'S LITERATURE
SECTION 5 TESTING AND VERIFYING DEMAND RESPONSE CAPABILITY
5.1 VERIFICATION OF CLAIMED DEMAND RESPONSE CAPABILITY
5.2 SET-UP FOR TESTING
5.3 VERIFICATION OF CLAIMED COMPLIANCE WITH DRM 1
5.3.1 Sequence of operations
5.3.2 Integral pump-unit controller
5.3.3 Separate pump-unit controller
5.4 VERIFICATION OF CLAIMED COMPLIANCE WITH DRM 2
5.4.1 Integral pump-unit controller
5.4.2 Separate pump-unit controller
5.5 VERIFICATION OF CLAIMED COMPLIANCE WITH DRM 4
5.5.1 Interrupting operation during a DRM 4 event
5.5.2 Switching on during a DRM 4 event
5.6 TEST REPORT
APPENDIX A - REGISTRATION INFORMATION FOR PUMP-UNIT CONTROLLERS
APPENDIX B - VERIFICATION OF CLAIMED DEMAND RESPONSE CAPABILITY FOR PUMP-UNIT CONTROLLERS, IN ACCORDANCE WITH AS/NZS 47553.2
AS/NZS 4755.3.2:2012
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.