AS/NZS 4130:2018
Polyethylene (PE) pipes for pressure applications
Provides a standard specification for manufacturers and purchasers of polyethylene pipes used for pressure applications. This revision deletes the separate Series 2 gas pipes dimension Table 3, and amalgamates the Series 2 pipes into the Series 1 dimension Table 2. The various tables are correspondingly renumbered throughout the Standard. For clarity, the terminology Series 3 has been retained.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$123.30 NZD
|
|
| HardCopy |
$137.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 4130:2018 POLYETHYLENE (PE) PIPES FOR PRESSURE APPLICATIONS
PREFACE
CONTENTS
FOREWORD
1 SCOPE AND APPLICATION
1.1 Scope
1.2 Application
1.3 Demonstration of conformance to this Standard
2 NORMATIVE REFERENCES
3 DEFINITIONS
3.1 Brittle failure
3.2 Co-extruded 'jacket' pipes
3.3 Ductile mode
3.4 Fuel gas
3.5 Hoop stress
3.6 Hydrostatic design stress (HDS)
3.7 Maximum allowable operating pressure (MAOP)
3.8 Nominal working pressure
3.9 Out-of-roundness (ovality)
3.10 Pipe material temperature
3.11 Shall
3.12 Should
3.13 Standard dimension ratio (SDR)
4 NOTATION
5 OVERALL SERVICE (DESIGN) COEFFICIENT
6 CLASSIFICATION
7 COMPOSITION
7.1 General
7.2 Rework material
7.3 Striping and jacket compounds
7.3.1 General
7.3.2 Thermal stability of striping compounds
7.3.3 Dispersion
7.3.4 Weathering resistance
8 COLOUR
8.1 General
8.2 Colour requirements for pipes used in Australia
8.2.1 Stripes and jackets
8.3 Colour requirements for pipes used in New Zealand
8.3.1 Stripes and jackets
9 GENERAL REQUIREMENTS
9.1 Diameter and wall thickness
9.1.1 Tables 2 and 3
9.1.2 Special applications
9.2 Length
9.3 Coiled pipe
9.4 Out of roundness
9.5 Freedom from defects
9.5.1 General
9.5.2 Pipe ends
9.5.3 Cleanliness
9.6 Effect on water
9.7 Stripes
10 PERFORMANCE REQUIREMENTS
10.1 Resistance to internal pressure
10.2 Reversion
10.3 Thermal stability
10.4 Slow crack growth resistance
11 MARKING
APPENDIX A - DEMONSTRATION OF CONFORMANCE TO THIS STANDARD
A1 SCOPE
A2 RELEVANCE
A3 DEFINITIONS
A3.1 Acceptable quality level (AQL)
A3.2 Batch
A3.3 Batch release test (BRT)
A3.4 Inspection level
A3.5 Lot
A3.6 New formulation
A3.7 Process verification test (PVT)
A3.8 Sample
A3.9 Sampling plan
A3.10 Type test (TT)
A4 MINIMUM SAMPLING AND TESTING FREQUENCY PLAN
A4.1 General
A4.2 Testing
A4.3 Retesting
A4.4 Rejection after test
APPENDIX B - CALCULATION OF MAXIMUM ALLOWABLE OPERATING PRESSURE (MAOP) AT 20°C FOR SERIES 1 WATER AND SEWAGE PIPES
B1 SCOPE
B2 SERIES 1 PIPES
APPENDIX C - DESIGN FACTORS
APPENDIX D - DIMENSIONAL REQUIREMENTS OF PIPES FOR SPECIAL APPLICATIONS
APPENDIX E - BIBLIOGRAPHY
Amendments
Previous versions
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
Related Information
Building Code Compliance Document G13
Ministry: Ministry of Business, Innovation, and Employment - Building Systems Performance (BSP)
Section: AS2
Citation context:AS1 Revoked 01/11/2023
Building Code Compliance Document E1
Ministry: Ministry of Business, Innovation, and Employment - Building Systems Performance (BSP)
Section: AS2
Citation context:Revoked 01/11/2023
Building Code Compliance Document E1
Ministry: Ministry of Business, Innovation, and Employment - Building Systems Performance (BSP)
Section: AS1
Citation context:Refers to AS/NZS 4130:2018+A1
Similar Standards
-
AS/NZS 1200:2015
Pressure equipment -
AS/NZS 1254:2010
PVC-U pipes and fittings for stormwater and surface water applications
-
AS/NZS 1254:2010 A1
PVC-U pipes and fittings for stormwater and surface water applications: Amendment 1 -
AS/NZS 1254:2010 A2
PVC-U pipes and fittings for stormwater and surface water applications: Amendment 2
AS/NZS 4130:2018 POLYETHYLENE (PE) PIPES FOR PRESSURE APPLICATIONS
PREFACE
CONTENTS
FOREWORD
1 SCOPE AND APPLICATION
1.1 Scope
1.2 Application
1.3 Demonstration of conformance to this Standard
2 NORMATIVE REFERENCES
3 DEFINITIONS
3.1 Brittle failure
3.2 Co-extruded 'jacket' pipes
3.3 Ductile mode
3.4 Fuel gas
3.5 Hoop stress
3.6 Hydrostatic design stress (HDS)
3.7 Maximum allowable operating pressure (MAOP)
3.8 Nominal working pressure
3.9 Out-of-roundness (ovality)
3.10 Pipe material temperature
3.11 Shall
3.12 Should
3.13 Standard dimension ratio (SDR)
4 NOTATION
5 OVERALL SERVICE (DESIGN) COEFFICIENT
6 CLASSIFICATION
7 COMPOSITION
7.1 General
7.2 Rework material
7.3 Striping and jacket compounds
7.3.1 General
7.3.2 Thermal stability of striping compounds
7.3.3 Dispersion
7.3.4 Weathering resistance
8 COLOUR
8.1 General
8.2 Colour requirements for pipes used in Australia
8.2.1 Stripes and jackets
8.3 Colour requirements for pipes used in New Zealand
8.3.1 Stripes and jackets
9 GENERAL REQUIREMENTS
9.1 Diameter and wall thickness
9.1.1 Tables 2 and 3
9.1.2 Special applications
9.2 Length
9.3 Coiled pipe
9.4 Out of roundness
9.5 Freedom from defects
9.5.1 General
9.5.2 Pipe ends
9.5.3 Cleanliness
9.6 Effect on water
9.7 Stripes
10 PERFORMANCE REQUIREMENTS
10.1 Resistance to internal pressure
10.2 Reversion
10.3 Thermal stability
10.4 Slow crack growth resistance
11 MARKING
APPENDIX A - DEMONSTRATION OF CONFORMANCE TO THIS STANDARD
A1 SCOPE
A2 RELEVANCE
A3 DEFINITIONS
A3.1 Acceptable quality level (AQL)
A3.2 Batch
A3.3 Batch release test (BRT)
A3.4 Inspection level
A3.5 Lot
A3.6 New formulation
A3.7 Process verification test (PVT)
A3.8 Sample
A3.9 Sampling plan
A3.10 Type test (TT)
A4 MINIMUM SAMPLING AND TESTING FREQUENCY PLAN
A4.1 General
A4.2 Testing
A4.3 Retesting
A4.4 Rejection after test
APPENDIX B - CALCULATION OF MAXIMUM ALLOWABLE OPERATING PRESSURE (MAOP) AT 20°C FOR SERIES 1 WATER AND SEWAGE PIPES
B1 SCOPE
B2 SERIES 1 PIPES
APPENDIX C - DESIGN FACTORS
APPENDIX D - DIMENSIONAL REQUIREMENTS OF PIPES FOR SPECIAL APPLICATIONS
APPENDIX E - BIBLIOGRAPHY
Amendments
Previous versions
AS/NZS 4130:2018
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.