AS/NZS 4024.2602:2020
Safety of Machinery, Part 2602: Requirements for cableless control systems of machinery
The objective of this Standard is to specify requirements for the functionality and interfacing of cableless (for example, radio, infrared) control systems that provide communication between operator control station(s) and the control system of a machine. Specific requirements are included for such operator control stations that are portable by the operator. This Standard is an adoption with national modifications, and has been reproduced from IEC 61745:2017 Safety of machinery - Requirements for cableless control systems of machinery. The modifications are additional requirements and are set out in Appendix ZZ, which has been added at the end of the source text.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$171.90 NZD
|
|
| HardCopy |
$191.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription pricing The cost of your subscription will depend on which standards you want to access, and how many people in your organisation need to be able to access the Online Library subscription at the same time (concurrent users). During your subscription period, we are also able to make any necessary changes and ensure you are aware of any pricing changes that result. For a quote, contact our Online Library team by emailing onlinelibrary@standards.govt.nz. |
AS/NZS 4024.2602:2020 Safety of machinery Requirements for cableless control systems of machinery (IEC 62745 (ED.1.0) MOD)
CONTENTS
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
4 Functional requirements
4.1 General
4.2 Operational preventions
4.2.1 Prevention of inadvertent actuation
4.2.2 Prevention of unauthorised operation
4.2.3 Prevention of unintended commands
4.3 Serial data transfer
4.4 Removal of remote station transmission
4.5 Establishment and indication of transmission and communication
4.6 Safety-related functions of the CCS
4.7 Stop functions of the CCS
4.7.1 General
4.7.2 Safety-related stop functions of a CCS
4.7.3 Classification of stop functions
4.8 Reset
4.9 Cessation of transmission from the remote station
4.10 Latching control functions
4.11 Behaviour on loss of supply
4.12 Multiple remote stations
4.13 Multiple base stations
4.14 Suspension of CCS control
4.15 Configurability protection
5 Verification
5.1 General
5.2 Labelling and markings
5.3 Documentation
5.4 Functional verifications
6 Information for use
6.1 General
6.2 Information to be provided
7 Labelling and markings
Annex A(informative)Logic of stop functions
Bibliography
Figure 1 – Block diagram example of a cableless control systemand its interaction with the machine control system
Figure A.1 – Logic for stop functions
Tables
Table 1 – Alphabetical list of definitions
Table 2 – Abbreviations
Table 3 – Overview of stop functions of the CCS
Table 4 – Verification of functional requirements
Table 5 – List of possible verifications to be required to the system integrator
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS IEC 60825.2:2022
Safety of laser products, Part 2: Safety of optical fibre communication systems (OFCSs)
-
BS 4727-3:Group 13:1992
Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to telecommunications and electronics, Optical fibre communication
-
BS EN 60728-13-1:2017
Cable networks for television signals, sound signals and interactive services, Bandwidth expansion for broadcast signal over FTTH system
-
BS EN 60728-13:2010
Cable networks for television signals, sound signals and interactive services, Optical systems for broadcast signal transmissions
AS/NZS 4024.2602:2020 Safety of machinery Requirements for cableless control systems of machinery (IEC 62745 (ED.1.0) MOD)
CONTENTS
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
4 Functional requirements
4.1 General
4.2 Operational preventions
4.2.1 Prevention of inadvertent actuation
4.2.2 Prevention of unauthorised operation
4.2.3 Prevention of unintended commands
4.3 Serial data transfer
4.4 Removal of remote station transmission
4.5 Establishment and indication of transmission and communication
4.6 Safety-related functions of the CCS
4.7 Stop functions of the CCS
4.7.1 General
4.7.2 Safety-related stop functions of a CCS
4.7.3 Classification of stop functions
4.8 Reset
4.9 Cessation of transmission from the remote station
4.10 Latching control functions
4.11 Behaviour on loss of supply
4.12 Multiple remote stations
4.13 Multiple base stations
4.14 Suspension of CCS control
4.15 Configurability protection
5 Verification
5.1 General
5.2 Labelling and markings
5.3 Documentation
5.4 Functional verifications
6 Information for use
6.1 General
6.2 Information to be provided
7 Labelling and markings
Annex A(informative)Logic of stop functions
Bibliography
Figure 1 – Block diagram example of a cableless control systemand its interaction with the machine control system
Figure A.1 – Logic for stop functions
Tables
Table 1 – Alphabetical list of definitions
Table 2 – Abbreviations
Table 3 – Overview of stop functions of the CCS
Table 4 – Verification of functional requirements
Table 5 – List of possible verifications to be required to the system integrator
AS/NZS 4024.2602:2020
Online Library subscription pricing
The cost of your subscription will depend on which standards you want to access, and how many people in your organisation need to be able to access the Online Library subscription at the same time (concurrent users). During your subscription period, we are also able to make any necessary changes and ensure you are aware of any pricing changes that result. For a quote, contact our Online Library team by emailing onlinelibrary@standards.govt.nz.