AS/NZS 3750.9:2009
Paints for steel structures - Organic zinc-rich primer
Specifies requirements for an organic zinc-rich primer intended to protect iron and steel against atmospheric corrosion. It is suitable for application by brush, or spray. Type 2 paint specified in the Standard is referred to in AS 2312 as Paint Reference No. C02.
AS/NZS 3750.9:2009 PAINTS FOR STEEL STRUCTURES - ORGANIC ZINC-RICH PRIMER
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 REFERENCED DOCUMENTS
1.3 DEFINITIONS
1.3.1 Organic zinc-rich primer
1.4 CLASSIFICATION
1.5 COLOUR
1.6 SAFETY PRECAUTIONS
SECTION 2 MATERIAL REQUIREMENTS
2.1 GENERAL
2.2 PIGMENT
2.2.1 Pigment content
2.2.2 Pigment constituents
2.2.3 Particle size
2.3 CONDITIONS OF TEST
2.4 LIQUID PAINT
2.4.1 Condition in container
2.4.2 Volume solids
2.4.3 Storage properties
2.4.4 Freedom from coarse particles
2.5 APPLICATION PROPERTIES
2.5.1 General
2.5.2 Brushing
2.5.3 Spraying
2.5.4 Pot-life assessment (Type 2 products only)
2.6 APPLIED FILM
2.6.1 Surface-dry time
2.6.2 Hard-dry time
2.6.3 Recoating Properties
2.6.4 Finish
2.6.5 Resistance to weathering
SECTION 3 PACKAGING AND LABELLING
3.1 PACKAGING
3.2 LABELLING
APPENDIX A - PURCHASING GUIDELINES
A1 GENERAL
A2 INFORMATION TO BE SUPPLIED WITH THE ENQUIRY OR ORDER
APPENDIX B - INFORMATION ON THE USE AND APPLICATION OF ORGANIC ZINC-RICH PRIMER
B1 SCOPE
B2 MANUFACTURER’S TECHNICAL DATA
B3 SAFETY PRECAUTIONS
B4 TYPICAL USES
B5 TYPES OF PRODUCT
B5.1 Type 1 products
B5.2 Type 2 products
B6 TYPICAL COATING THICKNESS
B7 PREPARATION OF STEEL SURFACES
B8 MIXING
B9 POT-LIFE
B10 STORAGE
APPENDIX C - REFERENCED DOCUMENTS
APPENDIX D - PREPARATION OF TEST PANELS
D1 SCOPE
D2 TEST PANEL MATERIAL
D3 PREPARATION
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
References
Methods of test for paints and related materials - Conditions of test - Temperature and humidity control
Methods of test for paints and related materials - Recommended materials for test panels
Methods of test for paints and related materials - Application properties - Brushing
Methods of test for paints and related materials - Application properties - Conventional air spraying
Methods of test for paints and related materials - Surface dry condition
Related Information
Similar Standards
-
AS/NZS 1554.1:2014
Structural steel welding - Part 1: Welding of steel structures -
AS/NZS 1554.1:2014 A1
Structural steel welding - Part 1: Welding of steel structures: Amendment 1 -
AS/NZS 1554.1:2014 A2
Structural steel welding - Part 1: Welding of steel structures: Amendment 2 -
AS/NZS 1554.2:2003
Structural steel welding - Stud welding (steel studs to steel)
AS/NZS 3750.9:2009 PAINTS FOR STEEL STRUCTURES - ORGANIC ZINC-RICH PRIMER
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 REFERENCED DOCUMENTS
1.3 DEFINITIONS
1.3.1 Organic zinc-rich primer
1.4 CLASSIFICATION
1.5 COLOUR
1.6 SAFETY PRECAUTIONS
SECTION 2 MATERIAL REQUIREMENTS
2.1 GENERAL
2.2 PIGMENT
2.2.1 Pigment content
2.2.2 Pigment constituents
2.2.3 Particle size
2.3 CONDITIONS OF TEST
2.4 LIQUID PAINT
2.4.1 Condition in container
2.4.2 Volume solids
2.4.3 Storage properties
2.4.4 Freedom from coarse particles
2.5 APPLICATION PROPERTIES
2.5.1 General
2.5.2 Brushing
2.5.3 Spraying
2.5.4 Pot-life assessment (Type 2 products only)
2.6 APPLIED FILM
2.6.1 Surface-dry time
2.6.2 Hard-dry time
2.6.3 Recoating Properties
2.6.4 Finish
2.6.5 Resistance to weathering
SECTION 3 PACKAGING AND LABELLING
3.1 PACKAGING
3.2 LABELLING
APPENDIX A - PURCHASING GUIDELINES
A1 GENERAL
A2 INFORMATION TO BE SUPPLIED WITH THE ENQUIRY OR ORDER
APPENDIX B - INFORMATION ON THE USE AND APPLICATION OF ORGANIC ZINC-RICH PRIMER
B1 SCOPE
B2 MANUFACTURER’S TECHNICAL DATA
B3 SAFETY PRECAUTIONS
B4 TYPICAL USES
B5 TYPES OF PRODUCT
B5.1 Type 1 products
B5.2 Type 2 products
B6 TYPICAL COATING THICKNESS
B7 PREPARATION OF STEEL SURFACES
B8 MIXING
B9 POT-LIFE
B10 STORAGE
APPENDIX C - REFERENCED DOCUMENTS
APPENDIX D - PREPARATION OF TEST PANELS
D1 SCOPE
D2 TEST PANEL MATERIAL
D3 PREPARATION