AS/NZS 3086:1996
Telecommunications installations - Integrated telecommunications cabling systems for small office/home office premises
Describes a generic premises cabling system for connecting one to four exchange access lines to various types of customer equipment (at various locations) within single premises or, for multi-occupancy buildings, within each occupant`s part of the building. It specifies physical interfaces, connecting techniques and installation methods for telecommunication cabling of individual buildings.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$94.50 NZD
|
|
| HardCopy |
$105.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 3086:1996 TELECOMMUNICATIONS INSTALLATIONS-INTEGRATED TELECOMMUNICATIONS CABLING SYSTEMS FOR SMALL OFFICE/HOME OFFICE ...
PREFACE
CONTENTS
1 SCOPE AND APPLICATION
1.1 Scope
1.2 Application
2 REFERENCED DOCUMENTS
3 DEFINITIONS AND ABBREVIATIONS
3.1 Definitions
3.1.1 Adaptor
3.1.2 Administration
3.1.3 Backbone cabling
3.1.4 Balanced cable
3.1.5 Bridged-tap
3.1.6 Distributor
3.1.7 Modular socket/connector
3.1.8 Network termination device
3.1.9 Splice
3.1.10 Telecommunications outlet
3.2 Abbreviations
4 PREMISES CABLING SYSTEM OVERVIEW
4.2 Premises cabling system components
4.2.1 Network termination device
4.2.2 Disconnect test point
4.2.3 Building cable
4.2.4 Distribution device
4.2.5 Telecommunications outlet
4.2.6 Equipment cords
4.2.7 Connecting hardware
5 INSTALLATION REQUIREMENTS
5.1 General
5.1.1 Component selection and installation
5.1.2 Exchange line
5.1.3 Network terminating device
5.1.4 Disconnect test point
5.1.5 Premises cabling— pair identification
5.1.6 Non-telecommunications usage
5.2 Minimum installed capability
5.2.1 Components
5.2.2 Spare Capacity
5.3 Installation
5.3.1 Planning
5.3.2 Regulatory requirements
5.3.3 Disconnect test point
5.3.4 Distribution device
5.3.5 Building cable
5.3.6 Telecommunications outlets
5.3.7 Wire junction devices
5.3.8 Administration
5.4 Rearrangements
5.4.1 Administration
5.4.2 Line and extension cords
5.4.3 Telecommunications outlets
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
References
Telecommunications installations - Telecommunications installations - Administration of communications cabling systems
Related Information
Similar Standards
-
AS/NZS 4295:2015
Analogue speech (angle modulated) equipment operating in land mobile and fixed services bands in the frequency range 29.7 MHz to 1 GHz -
AS/NZS 4295:2015 A1
Analogue speech (angle modulated) equipment operating in land mobile and fixed services bands in the frequency range 29.7 MHz to 1 GHz: Amendment 1 -
IEC 62657-2:2022
Industrial networks - Coexistence of wireless systems - Part 2: Coexistence management
-
SAA/SNZ HB 75:1996
Teleconferencing Handbook
AS/NZS 3086:1996 TELECOMMUNICATIONS INSTALLATIONS-INTEGRATED TELECOMMUNICATIONS CABLING SYSTEMS FOR SMALL OFFICE/HOME OFFICE ...
PREFACE
CONTENTS
1 SCOPE AND APPLICATION
1.1 Scope
1.2 Application
2 REFERENCED DOCUMENTS
3 DEFINITIONS AND ABBREVIATIONS
3.1 Definitions
3.1.1 Adaptor
3.1.2 Administration
3.1.3 Backbone cabling
3.1.4 Balanced cable
3.1.5 Bridged-tap
3.1.6 Distributor
3.1.7 Modular socket/connector
3.1.8 Network termination device
3.1.9 Splice
3.1.10 Telecommunications outlet
3.2 Abbreviations
4 PREMISES CABLING SYSTEM OVERVIEW
4.2 Premises cabling system components
4.2.1 Network termination device
4.2.2 Disconnect test point
4.2.3 Building cable
4.2.4 Distribution device
4.2.5 Telecommunications outlet
4.2.6 Equipment cords
4.2.7 Connecting hardware
5 INSTALLATION REQUIREMENTS
5.1 General
5.1.1 Component selection and installation
5.1.2 Exchange line
5.1.3 Network terminating device
5.1.4 Disconnect test point
5.1.5 Premises cabling— pair identification
5.1.6 Non-telecommunications usage
5.2 Minimum installed capability
5.2.1 Components
5.2.2 Spare Capacity
5.3 Installation
5.3.1 Planning
5.3.2 Regulatory requirements
5.3.3 Disconnect test point
5.3.4 Distribution device
5.3.5 Building cable
5.3.6 Telecommunications outlets
5.3.7 Wire junction devices
5.3.8 Administration
5.4 Rearrangements
5.4.1 Administration
5.4.2 Line and extension cords
5.4.3 Telecommunications outlets
AS/NZS 3086:1996
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.