AS/NZS 3017:2022
Electrical installations – Verification inspection and testing
Standard specifies inspection and test methods to demonstrate that low voltage electrical installations comply with safety requirements for the prevention of fire, and to prevent a person or livestock from sustaining an electric shock. Covers electrical installations connected to an MEN system of earthing.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$186.30 NZD
|
|
| HardCopy |
$207.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 3017:2022 Verification by inspection and testing
Preface
Introduction
Section 1 Scope and general
1.1 Scope
1.2 Application
1.3 Normative references
1.4 Terms and definitions
1.5 Safety
1.5.1 General
1.5.2 Work health and safety
Section 2 Test equipment
2.1 Equipment required
2.2 Selection of test equipment
2.2.1 Equipment requirements
2.2.2 Requirements for specific types of test equipment
2.3 Test equipment checks
2.3.1 Basic functional checks before each use
2.3.2 Periodic checks of accuracy
2.3.3 Calibration
Section 3 Visual inspection
3.1 General
3.2 Safety requirements — Before visual inspection
3.3 Check list
Section 4 Testing installations
4.1 General requirements
4.2 Verification tests
4.2.1 Sequence of tests
4.2.2 Test failures
4.3 Test for de-energized
4.3.1 General
4.3.2 Considerations
4.3.3 Requirements
4.3.4 Results
4.3.5 Test procedure — Confirming isolation
4.4 Earth continuity and resistance
4.4.1 General
4.4.2 Considerations
4.4.3 Requirements
4.4.4 Results
4.4.5 Procedures
4.5 Insulation resistance
4.5.1 General
4.5.2 Considerations
4.5.3 Requirements
4.5.4 Results
4.5.5 Procedures
4.6 Polarity and correct circuit connections
4.6.1 General
4.6.2 Considerations
4.6.3 Requirements
4.6.4 Results
4.6.5 Procedures
4.7 Test of phase sequence of multi-phase socket outlets
4.7.1 General
4.7.2 Considerations
4.7.3 Requirements
4.7.4 Results
4.7.5 Procedures
4.8 Earth fault-loop impedance
4.8.1 General
4.8.2 Considerations
4.8.3 Requirements
4.8.4 Results
4.8.5 Procedures
4.9 Confirming function of residual current devices
4.9.1 General
4.9.2 Considerations
4.9.3 Requirements
4.9.4 Results
4.9.5 Procedures
4.10 Measuring resistance of earth electrode to general mass of earth
4.10.1 General
4.10.2 Electrode testing
4.11 Measuring touch voltage
4.11.1 General
4.11.2 Considerations
4.11.3 Results
4.11.4 Procedure
4.12 Test for integrity of the incoming neutral
4.12.1 General
4.12.2 Considerations
4.12.3 Requirements
4.12.4 Results
4.12.5 Procedures
Section 5 Installation test records
Appendix A (informative) Additional information for selecting and using test equipment
Appendix B (informative) Installation test record forms
Bibliography
Previous versions
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
Related Information
Similar Standards
-
AS/NZS 3000:2018
Electrical installations - Known as the Australian/New Zealand Wiring Rules -
AS/NZS 3000:2018 A1
Electrical installations (known as the Australian/New Zealand Wiring Rules): Amendment 1 -
AS/NZS 3000:2018 A2
Electrical Installations (known as the Australian/New Zealand Wiring Rules)
-
AS/NZS 3000:2018 A3
Electrical installations (known as the Australian/New Zealand Wiring Rules)
AS/NZS 3017:2022 Verification by inspection and testing
Preface
Introduction
Section 1 Scope and general
1.1 Scope
1.2 Application
1.3 Normative references
1.4 Terms and definitions
1.5 Safety
1.5.1 General
1.5.2 Work health and safety
Section 2 Test equipment
2.1 Equipment required
2.2 Selection of test equipment
2.2.1 Equipment requirements
2.2.2 Requirements for specific types of test equipment
2.3 Test equipment checks
2.3.1 Basic functional checks before each use
2.3.2 Periodic checks of accuracy
2.3.3 Calibration
Section 3 Visual inspection
3.1 General
3.2 Safety requirements — Before visual inspection
3.3 Check list
Section 4 Testing installations
4.1 General requirements
4.2 Verification tests
4.2.1 Sequence of tests
4.2.2 Test failures
4.3 Test for de-energized
4.3.1 General
4.3.2 Considerations
4.3.3 Requirements
4.3.4 Results
4.3.5 Test procedure — Confirming isolation
4.4 Earth continuity and resistance
4.4.1 General
4.4.2 Considerations
4.4.3 Requirements
4.4.4 Results
4.4.5 Procedures
4.5 Insulation resistance
4.5.1 General
4.5.2 Considerations
4.5.3 Requirements
4.5.4 Results
4.5.5 Procedures
4.6 Polarity and correct circuit connections
4.6.1 General
4.6.2 Considerations
4.6.3 Requirements
4.6.4 Results
4.6.5 Procedures
4.7 Test of phase sequence of multi-phase socket outlets
4.7.1 General
4.7.2 Considerations
4.7.3 Requirements
4.7.4 Results
4.7.5 Procedures
4.8 Earth fault-loop impedance
4.8.1 General
4.8.2 Considerations
4.8.3 Requirements
4.8.4 Results
4.8.5 Procedures
4.9 Confirming function of residual current devices
4.9.1 General
4.9.2 Considerations
4.9.3 Requirements
4.9.4 Results
4.9.5 Procedures
4.10 Measuring resistance of earth electrode to general mass of earth
4.10.1 General
4.10.2 Electrode testing
4.11 Measuring touch voltage
4.11.1 General
4.11.2 Considerations
4.11.3 Results
4.11.4 Procedure
4.12 Test for integrity of the incoming neutral
4.12.1 General
4.12.2 Considerations
4.12.3 Requirements
4.12.4 Results
4.12.5 Procedures
Section 5 Installation test records
Appendix A (informative) Additional information for selecting and using test equipment
Appendix B (informative) Installation test record forms
Bibliography
Previous versions
AS/NZS 3017:2022
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.