AS/NZS 3000:2007
Electrical installations (known as the Australian/New Zealand Wiring Rules)
Provides requirements for the selection and installation of electrical equipment, and design and testing of electrical installations, especially with regard to the essential requirements for safety of persons and livestock from physical injury, fire or electric shock. The presentation of this edition differs from previous editions of AS/NZS 3000 in that the Standard comprises two parts but with both parts bound as one document. Part 1 provides uniform essential elements that constitute the minimum regulatory requirements for a safe electrical installation. Part 2 provides installation practices that achieve certainty of compliance with the essential safety requirements of Part 1.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$186.30 NZD
|
|
| HardCopy |
$207.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription pricing The cost of your subscription will depend on which standards you want to access, and how many people in your organisation need to be able to access the Online Library subscription at the same time (concurrent users). During your subscription period, we are also able to make any necessary changes and ensure you are aware of any pricing changes that result. For a quote, contact our Online Library team by emailing onlinelibrary@standards.govt.nz. |
CONTENTS
SECTION 1 SCOPE, APPLICATION AND FUNDAMENTAL PRINCIPLES
SECTION 2 GENERAL ARRANGEMENT, CONTROL AND PROTECTION
SECTION 3 SELECTION AND INSTALLATION OF WIRING SYSTEMS
SECTION 4 SELECTION AND INSTALLATION OF APPLIANCES ANDACCESSORIES
SECTION 5 EARTHING ARRANGEMENTS AND EARTHINGCONDUCTORS
SECTION 6 DAMP SITUATIONS
SECTION 7 SPECIAL ELECTRICAL INSTALLATIONS
SECTION 8 VERIFICATION
APPENDIX AREFERENCED DOCUMENTS
APPENDIX B CIRCUIT PROTECTION GUIDE
APPENDIX C CIRCUIT ARRANGEMENTS
APPENDIX D MINIMUM SIZES OF POSTS, POLES AND STRUTS FOR AERIAL LINE CONDUCTORS
APPENDIX E ELECTRICAL INSTALLATION REQUIREMENTS IN NATIONAL BUILDING CODES
APPENDIX F INSTALLATION OF SURGE PROTECTIVE DEVICES
APPENDIX G DEGREES OF PROTECTION OF ENCLOSED EQUIPMENT
APPENDIX H WS CLASSIFICATION OF WIRING SYSTEMS
APPENDIX I PROTECTIVE DEVICE RATINGS AND METRIC EQUIVALENT SIZES FOR IMPERIAL CABLES USED IN ALTERATIONS ADDITIONS AND REPAIRS
APPENDIX J SYMBOLS USED IN THIS STANDARD
APPENDIX K (deleted)
APPENDIX L ELECTRIC SHOCK SURVIVAL—Australia
APPENDIX M ELECTRIC SHOCK SURVIVAL—New Zealand
INDEX
Amendments
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
References
Electrical installations - Extra-low voltage d.c. power supplies and service earthing within public telecommunications networks
Related Information
Approved Code Of Practice for Fire or Explosion in Underground Mines and Tunnels
Ministry: WorkSafe New Zealand
Section: Appendix C3
Citation context:AS/NZS 3000:2007 “Electrical installations (known as the Australian/New Zealand Wiring Rules)”
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: 57
Citation context:(1) Every installation that operates at low voltage or extra-low voltage must comply with either Part 1 or Part 2 of AS/NZS 3000. (2) A person who installs any part of a low voltage installation must... ...(b) ensure that the installation complies with t
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: 67(2)
Citation context:Refers to 3000:2007(AS/NZS)A1. The following matters may also be confirmed in a certificate of compliance: (a) in relation to a completed new low voltage installation, that- (i) the installation has been installed in accordance with a design prepared in accordance with Part 1 of AS/NZS
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: 59(1)
Citation context:Refers to 3000:2007(AS/NZS)A2. This regulation applies to an installation, or part of any installation, that is being installed in accordance with Part 1 of AS/NZS 3000, despite anything in that Part.
Building Code Compliance Document SH
Ministry: Ministry of Business, Innovation, and Employment - Building Systems Performance (BSP)
Section: AS1
Citation context:Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: 24(6)
Citation context:Where an RCD is required by AS/NZS 3000 to be installed to protect children from the risk of electric shock from direct contact, the RCD is deemed to be electrically unsafe if ...
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: 60
Citation context:(1) A person who installs a domestic installation that has a maximum demand at or below 80 amperes single phase or 50 amperes per phase in multi-phase must ensure that the installation complies with Part 2 of AS/NZS 3000. (2) A person who installs any of
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: 65
Citation context:(1) Every low voltage installation on which prescribed electrical work is done must be tested in accordance with AS/NZS 3000... ...(3) Despite subclause (1), prescribed electrical work done on low voltage AC railway signalling equipment must be tested in
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: 58
Citation context:Refers to 3000:2007(AS/NZS)A1. (1) Every declaration of conformity for a low voltage installation must... ...(b) confirm, in the case of an installation under Part 1 of AS/NZS 3000, that the design complies with regulation 59; and... (3) A declaration of conformity for a revenue meter, if made under this subclause, must— “(a) identify the method of installation to be used; and “(b) confirm that the method complies with Part 1 of AS/NZS 3000; and.... (4) A declaration of conformity signed by a person other than the installer may be treated by the installer as evidence that the design complies with Part 1 or 2 (as appropriate) of AS/NZS 3000.
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: 72
Citation context:Refers to 3000:2007(AS/NZS)A1. (1) A person who inspects prescribed electrical work done on an installation that complies with Part 1 of AS/NZS 3000 must carry out the inspection in accordance with that standard and in accordance with the verification process described in the declarati
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: 78(2)
Citation context:Refers to 3000:2007(AS/NZS)A2. Every warrant of electrical fitness for a connectable installation must be issued in accordance with AS/NZS 3001, except that... (c) ...but only after an assessment for compliance with Part 1 of AS/NZS 3000.
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: Schedule 8, Clause 28
Citation context:(8) Coverings on cables must be protected against chemical corrosion in the manner provided for in AS/NZS 3000.
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: 57
Citation context:Refers to 3000:2007(AS/NZS)A1. (1) Every installation that operates at low voltage or extra-low voltage must comply with either Part 1 or Part 2 of AS/NZS 3000. (2) A person who installs any part of a low voltage installation must... ...(b) ensure that the installation complies with t
Approved Code Of Practice For Cranes
Ministry: WorkSafe New Zealand
Section: Appendix C
Citation context:AS/NZS 3000 is listed as a reference Standard
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: 78(2)
Citation context:Refers to 3000:2007(AS/NZS)A1. Every warrant of electrical fitness for a connectable installation must be issued in accordance with AS/NZS 3001, except that... (c) ...but only after an assessment for compliance with Part 1 of AS/NZS 3000.
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: 58
Citation context:Refers to 3000:2007(AS/NZS)A2. (1) Every declaration of conformity for a low voltage installation must... ...(b) confirm, in the case of an installation under Part 1 of AS/NZS 3000, that the design complies with regulation 59; and... (3) A declaration of conformity for a revenue meter, if made under this subclause, must— “(a) identify the method of installation to be used; and “(b) confirm that the method complies with Part 1 of AS/NZS 3000; and.... (4) A declaration of conformity signed by a person other than the installer may be treated by the installer as evidence that the design complies with Part 1 or 2 (as appropriate) of AS/NZS 3000.
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: 65
Citation context:Refers to 3000:2007(AS/NZS)A2. (1) Every low voltage installation on which prescribed electrical work is done must be tested in accordance with AS/NZS 3000... ...(3) Despite subclause (1), prescribed electrical work done on low voltage AC railway signalling equipment must be tested in
Approved Code Of Practice for Fire or Explosion in Underground Mines and Tunnels
Ministry: WorkSafe New Zealand
Section: 6.7.2
Citation context:The mine or tunnel manager should ensure that:... ...(o) Electrical equipment, including lighting, meets the requirements of... ...and wiring meets the requirements of AS/NZS 3000:2007 “Electrical installations (known as the Australian/New Zealand Wiring Rules)”, as well as...
Approved Code Of Practice for Fire or Explosion in Underground Mines and Tunnels
Ministry: WorkSafe New Zealand
Section: 6.7.1
Citation context:Explosives magazines - The mine or tunnel manager should ensure that... ...(j) Electrical equipment, including lighting, meets the requirements of... ...and wiring meets the requirements of AS/NZS 3000:2007 “Electrical installations (known as the Australian/New Zealand Wiring Rules)”.
Approved Code Of Practice For Cranes
Ministry: WorkSafe New Zealand
Section: 3.1(7)
Citation context:Every controller of a crane is to take all practicable steps to: (7) ensure that the electrical installation of every crane is in accordance with the appropriate requirements of AS/NZS 3000:Electrical Installations (known as the Australian/New Zealand Wiring Rules)...
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: 61AA
Citation context:(2) This regulation applies despite anything in Part 1 or Part 2 of AS/NZS 3000.
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: Schedule 8, Clause 6
Citation context:Refers to 3000:2007(AS/NZS)A2. (2) This clause applies despite anything in Part 1 or 2 of AS/NZS 3000 or in these regulations.
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: Schedule 8, Clause 28
Citation context:Refers to 3000:2007(AS/NZS)A2. (8) Coverings on cables must be protected against chemical corrosion in the manner provided for in AS/NZS 3000.
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: 61AA
Citation context:Refers to 3000:2007(AS/NZS)A2. (2) This regulation applies despite anything in Part 1 or Part 2 of AS/NZS 3000.
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: 24(6)
Citation context:Refers to 3000:2007(AS/NZS)A2. Where an RCD is required by AS/NZS 3000 to be installed to protect children from the risk of electric shock from direct contact, the RCD is deemed to be electrically unsafe if ...
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: 61AA
Citation context:Refers to 3000:2007(AS/NZS)A1. (2) This regulation applies despite anything in Part 1 or Part 2 of AS/NZS 3000.
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: 6A
Citation context:(2) In these regulations, high-risk prescribed electrical work means the prescribed electrical work (not being low-risk prescribed electrical work) that - (a) comprises or includes the installation, or adjustment of the settings, of any of the following: (i) an extra-low or low voltage installation that does not, or will not, comply with Part 2 of AS/NZS 3000:... ...(d) is work on low voltage AC railway signalling equipment except where the equipment has been tested in accordance with ECP 60 and the work has been carried out in accordance with AS/NZS 3000:...
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: 67(2)
Citation context:Refers to 3000:2007(AS/NZS)A2. The following matters may also be confirmed in a certificate of compliance: (a) in relation to a completed new low voltage installation, that- (i) the installation has been installed in accordance with a design prepared in accordance with Part 1 of AS/NZS
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: 78(2)
Citation context:Every warrant of electrical fitness for a connectable installation must be issued in accordance with AS/NZS 3001, except that... (c) ...but only after an assessment for compliance with Part 1 of AS/NZS 3000.
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: 65
Citation context:Refers to 3000:2007(AS/NZS)A1. (1) Every low voltage installation on which prescribed electrical work is done must be tested in accordance with AS/NZS 3000... ...(3) Despite subclause (1), prescribed electrical work done on low voltage AC railway signalling equipment must be tested in
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: Schedule 2
Citation context:Refers to 3000:2007(AS/NZS)A2. AS/NZS 3000 (means) AS/NZS 3000:2007: Electrical installations (known as the Australian/New Zealand Wiring Rules): including Amendments 1 and 2, subject to the following modifications....
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: 70
Citation context:Refers to 3000:2007(AS/NZS)A2. (1) Prescribed electrical work that must be certified must also be inspected if it is any of the following: (a) work carried out in accordance with Part 1 of AS/NZS 3000:... ...(2) However, prescribed electrical work on low voltage railway signalling inst
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: 64(2)
Citation context:Refers to 3000:2007(AS/NZS)A2. For the purposes of section 79(1)(a) of the Act, the domestic electrical wiring work that an owner of premises may do is as follows:... ...(b) installing, extending, and altering subcircuits (including submains), but only if... ...(ii) the work is tested
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: 6A
Citation context:Refers to 3000:2007(AS/NZS)A2. (2) In these regulations, high-risk prescribed electrical work means the prescribed electrical work (not being low-risk prescribed electrical work) that - (a) comprises or includes the installation, or adjustment of the settings, of any of the following: (i) an extra-low or low voltage installation that does not, or will not, comply with Part 2 of AS/NZS 3000:... ...(d) is work on low voltage AC railway signalling equipment except where the equipment has been tested in accordance with ECP 60 and the work has been carried out in accordance with AS/NZS 3000:...
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: 60
Citation context:Refers to 3000:2007(AS/NZS)A2. (1) A person who installs a domestic installation that has a maximum demand at or below 80 amperes single phase or 50 amperes per phase in multi-phase must ensure that the installation complies with Part 2 of AS/NZS 3000. (2) A person who installs any of
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: 72
Citation context:Refers to 3000:2007(AS/NZS)A2. (1) A person who inspects prescribed electrical work done on an installation that complies with Part 1 of AS/NZS 3000 must carry out the inspection in accordance with that standard and in accordance with the verification process described in the declarati
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: 4 Interpretation
Citation context:Refers to 3000:2007(AS/NZS)A2. (3) A term used in these regulations and not defined in the Act or these regulations, and to which subclause (2) does not apply, has the meaning given (if any), (a) in the case of installations, in AS/NZS 3000; and ...
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: 6A
Citation context:Refers to 3000:2007(AS/NZS)A1. (2) In these regulations, high-risk prescribed electrical work means the prescribed electrical work (not being low-risk prescribed electrical work) that - (a) comprises or includes the installation, or adjustment of the settings, of any of the following: (i) an extra-low or low voltage installation that does not, or will not, comply with Part 2 of AS/NZS 3000:... ...(d) is work on low voltage AC railway signalling equipment except where the equipment has been tested in accordance with ECP 60 and the work has been carried out in accordance with AS/NZS 3000:...
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: 57
Citation context:Refers to 3000:2007(AS/NZS)A2. (1) Every installation that operates at low voltage or extra-low voltage must comply with either Part 1 or Part 2 of AS/NZS 3000. (2) A person who installs any part of a low voltage installation must... ...(b) ensure that the installation complies with t
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: 24(6)
Citation context:Refers to 3000:2007(AS/NZS)A1. Where an RCD is required by AS/NZS 3000 to be installed to protect children from the risk of electric shockfrom direct contact, the RCD is deemed to be electrically unsafe if ...
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: 60
Citation context:Refers to 3000:2007(AS/NZS)A1. (1) A person who installs a domestic installation that has a maximum demand at or below 80 amperes single phase or 50 amperes per phase in multi-phase must ensure that the installation complies with Part 2 of AS/NZS 3000. (2) A person who installs any of
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: 70
Citation context:Refers to 3000:2007(AS/NZS)A1. (1) Prescribed electrical work that must be certified must also be inspected if it is any of the following: (a) work carried out in accordance with Part 1 of AS/NZS 3000:... ...(2) However, prescribed electrical work on low voltage railway signalling inst
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: Schedule 2
Citation context:Refers to 3000:2007(AS/NZS)A1. AS/NZS 3000 (means) AS/NZS 3000:2007: Electrical installations (known as the Australian/New Zealand Wiring Rules): including Amendments 1 and 2, subject to the following modifications....
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: 58
Citation context:(1) Every declaration of conformity for a low voltage installation must... ...(b) confirm, in the case of an installation under Part 1 of AS/NZS 3000, that the design complies with regulation 59; and... (3) A declaration of conformity for a revenue meter, if made under this subclause, must— “(a) identify the method of installation to be used; and “(b) confirm that the method complies with Part 1 of AS/NZS 3000; and.... (4) A declaration of conformity signed by a person other than the installer may be treated by the installer as evidence that the design complies with Part 1 or 2 (as appropriate) of AS/NZS 3000.
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: 67(2)
Citation context:The following matters may also be confirmed in a certificate of compliance: (a) in relation to a completed new low voltage installation, that- (i) the installation has been installed in accordance with a design prepared in accordance with Part 1 of AS/NZS
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: Schedule 8, Clause 6
Citation context:Refers to 3000:2007(AS/NZS)A1. (2) This clause applies despite anything in Part 1 or 2 of AS/NZS 3000 or in these regulations.
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: Schedule 8, Clause 6
Citation context:(2) This clause applies despite anything in Part 1 or 2 of AS/NZS 3000 or in these regulations.
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: 4 Interpretation
Citation context:(3) A term used in these regulations and not defined in the Act or these regulations, and to which subclause (2) does not apply, has the meaning given (if any), (a) in the case of installations, in AS/NZS 3000; and ...
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: 59(1)
Citation context:This regulation applies to an installation, or part of any installation, that is being installed in accordance with Part 1 of AS/NZS 3000, despite anything in that Part.
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: 72
Citation context:(1) A person who inspects prescribed electrical work done on an installation that complies with Part 1 of AS/NZS 3000 must carry out the inspection in accordance with that standard and in accordance with the verification process described in the declarati
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: 59(1)
Citation context:Refers to 3000:2007(AS/NZS)A1. This regulation applies to an installation, or part of any installation, that is being installed in accordance with Part 1 of AS/NZS 3000, despite anything in that Part.
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: 64(2)
Citation context:For the purposes of section 79(1)(a) of the Act, the domestic electrical wiring work that an owner of premises may do is as follows:... ...(b) installing, extending, and altering subcircuits (including submains), but only if... ...(ii) the work is tested
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: 70
Citation context:(1) Prescribed electrical work that must be certified must also be inspected if it is any of the following: (a) work carried out in accordance with Part 1 of AS/NZS 3000:... ...(2) However, prescribed electrical work on low voltage railway signalling inst
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: Schedule 2
Citation context:AS/NZS 3000 (means) AS/NZS 3000:2007: Electrical installations (known as the Australian/New Zealand Wiring Rules): including Amendments 1 and 2, subject to the following modifications....
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: 4 Interpretation
Citation context:Refers to 3000:2007(AS/NZS)A1. (3) A term used in these regulations and not defined in the Act or these regulations, and to which subclause (2) does not apply, has the meaning given (if any), (a) in the case of installations, in AS/NZS 3000; and ...
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: 64(2)
Citation context:Refers to 3000:2007(AS/NZS)A1. For the purposes of section 79(1)(a) of the Act, the domestic electrical wiring work that an owner of premises may do is as follows:... ...(b) installing, extending, and altering subcircuits (including submains), but only if... ...(ii) the work is tested
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: Schedule 8, Clause 28
Citation context:Refers to 3000:2007(AS/NZS)A1. (8) Coverings on cables must be protected against chemical corrosion in the manner provided for in AS/NZS 3000.
Gazette Notice 9 April 2015: Prescribed Requirements Relating to the Completion of Competence Programmes in Respect of Persons Applying for Practising Licences or Applying for Renewals of Practising Licences
Ministry: Electrical Workers Registration Board
Section: Schedule 2, Part A
Citation context:The following subject material must be included in the electrical safety aspect of the Competence Programme for the respective practising licence classes where any person applying for a practising licence is engaged either full time or part time on low voltage electrical installations designed and constructed to AS/NZS 3000 and on electrical appliances that are supplied from such installations:... ...Earthing requirements as listed in AS/NZS 3000... ...Testing and certification as listed in AS/NZS 3000, AS/NZS 3760...
Similar Standards
-
AS/NZS 1020:1995
The control of undesirable static electricity
-
AS/NZS 1284.13:2002
Electricity metering - In-service compliance testing
-
AS/NZS 2500:2020
Safe use of medical electrical equipment in health care -
AS/NZS 2978:1995
Insulating mats for electrical purposes
CONTENTS
SECTION 1 SCOPE, APPLICATION AND FUNDAMENTAL PRINCIPLES
SECTION 2 GENERAL ARRANGEMENT, CONTROL AND PROTECTION
SECTION 3 SELECTION AND INSTALLATION OF WIRING SYSTEMS
SECTION 4 SELECTION AND INSTALLATION OF APPLIANCES ANDACCESSORIES
SECTION 5 EARTHING ARRANGEMENTS AND EARTHINGCONDUCTORS
SECTION 6 DAMP SITUATIONS
SECTION 7 SPECIAL ELECTRICAL INSTALLATIONS
SECTION 8 VERIFICATION
APPENDIX AREFERENCED DOCUMENTS
APPENDIX B CIRCUIT PROTECTION GUIDE
APPENDIX C CIRCUIT ARRANGEMENTS
APPENDIX D MINIMUM SIZES OF POSTS, POLES AND STRUTS FOR AERIAL LINE CONDUCTORS
APPENDIX E ELECTRICAL INSTALLATION REQUIREMENTS IN NATIONAL BUILDING CODES
APPENDIX F INSTALLATION OF SURGE PROTECTIVE DEVICES
APPENDIX G DEGREES OF PROTECTION OF ENCLOSED EQUIPMENT
APPENDIX H WS CLASSIFICATION OF WIRING SYSTEMS
APPENDIX I PROTECTIVE DEVICE RATINGS AND METRIC EQUIVALENT SIZES FOR IMPERIAL CABLES USED IN ALTERATIONS ADDITIONS AND REPAIRS
APPENDIX J SYMBOLS USED IN THIS STANDARD
APPENDIX K (deleted)
APPENDIX L ELECTRIC SHOCK SURVIVAL—Australia
APPENDIX M ELECTRIC SHOCK SURVIVAL—New Zealand
INDEX
Amendments
Previous versions
AS/NZS 3000:2007
Online Library subscription pricing
The cost of your subscription will depend on which standards you want to access, and how many people in your organisation need to be able to access the Online Library subscription at the same time (concurrent users). During your subscription period, we are also able to make any necessary changes and ensure you are aware of any pricing changes that result. For a quote, contact our Online Library team by emailing onlinelibrary@standards.govt.nz.