AS/NZS 2924.3:2024
High-pressure decorative laminates (HPL, HPDL) – Sheets based on thermosetting resins (usually called laminates) Part 3: Classification and specifications for laminates less than 2 mm thick and intended for bonding to supporting substrates
Standard specifies requirements to high-pressure laminates (HPL) less than 2 mm thick normally intended for bonding to supporting substrates to produce HPL composite panels and establishes a classification system for high-pressure decorative laminates according to their performance and main recommended fields of application, including materials with special characteristics, for example formability or defined reaction to fire. This document also specifies requirements for the properties of the various types of laminates covered by this classification system.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$132.30 NZD
|
|
| HardCopy |
$147.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 2924.3:2024 Sheets based on thermosetting resins (usually called laminates) Classification and specifications for laminates less than 2 mm thick and intended for bonding to supporting substrates (ISO 4586-3:2018, IDT)
Preface
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Material types
5 Requirements
5.1 General
5.2 Numerical classification system
5.3 Alphabetical classification system
5.4 Nomenclature
6 Requirements
6.1 Compliance
6.2 Inspection requirements
6.2.1 General
6.2.2 Colour and pattern
6.2.3 Surface finish
6.2.4 Reverse side
6.2.5 Visual inspection
6.3 Dimensional tolerance requirements
6.4 Test requirements
6.4.1 General requirements
6.4.2 Additional requirements for Type P laminates
6.4.3 Notes on requirements for reaction to fire (see Annex B)
Annex A (informative) Addendum to Table 5 relating to test method for resistance to scratching
Annex B (informative) Addendum to 6.4.3, relating to fire performance
Annex C (informative) Addendum relating to electrostatic properties
Bibliography
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
Related Information
Similar Standards
-
AS/NZS 2924.1:2024
High-pressure decorative laminates (HPL, HPDL) – Sheets based on thermosetting resins (usually called laminates) Part 1: Introduction and general information
-
AS/NZS 2924.2:2024
High-pressure decorative laminates (HPL, HPDL) – Sheets based on thermosetting resins (usually called laminates) Part 2: Determination of properties
-
AS/NZS 2924.4:2024
High-pressure decorative laminates (HPL, HPDL) – Sheets based on thermosetting resins (usually called laminates) Part 4: Classification and specifications for compact laminates of thickness 2 mm and greater
-
AS/NZS 2924.5:2024
High-pressure decorative laminates (HPL, HPDL) – Sheets based on thermosetting resins (usually called laminates) Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates
AS/NZS 2924.3:2024 Sheets based on thermosetting resins (usually called laminates) Classification and specifications for laminates less than 2 mm thick and intended for bonding to supporting substrates (ISO 4586-3:2018, IDT)
Preface
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Material types
5 Requirements
5.1 General
5.2 Numerical classification system
5.3 Alphabetical classification system
5.4 Nomenclature
6 Requirements
6.1 Compliance
6.2 Inspection requirements
6.2.1 General
6.2.2 Colour and pattern
6.2.3 Surface finish
6.2.4 Reverse side
6.2.5 Visual inspection
6.3 Dimensional tolerance requirements
6.4 Test requirements
6.4.1 General requirements
6.4.2 Additional requirements for Type P laminates
6.4.3 Notes on requirements for reaction to fire (see Annex B)
Annex A (informative) Addendum to Table 5 relating to test method for resistance to scratching
Annex B (informative) Addendum to 6.4.3, relating to fire performance
Annex C (informative) Addendum relating to electrostatic properties
Bibliography
AS/NZS 2924.3:2024
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.