AS/NZS 2205.3.1:2020
Destructive tests on welds in metallic materials - Bend tests
Standard adopts ISO 5173:2009 which specifies a method for making transverse root, face and side bend tests on test specimens taken from butt welds, butt welds with cladding (subdivided into welds in clad plates and clad welds) and cladding without butt welds, in order to assess ductility and/or absence of imperfections on or near the surface of the test specimen. It also gives the dimensions of the test specimen. In addition, this document specifies a method for making longitudinal root and face bend tests to be used instead of transverse bend tests for heterogeneous assemblies when base materials and/or filler metal have a significant difference in their physical and mechanical properties in relation to bending. This document applies to metallic materials in all forms of product with welded joints made by any fusion arc welding process.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$139.50 NZD
|
|
| HardCopy |
$155.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 2205.3.1:2020 Destructive tests on welds in metallic materials Bend tests
Preface
Foreword
1 Scope
2 Terms and definitions
3 Principle
4 Symbols and abbreviated terms
4.1 Symbols
4.2 Abbreviated terms
4.3 Figures corresponding to the abbreviations
5 Preparation of test specimens
5.1 General
5.2 Location
5.3 Marking
5.4 Heat treatment and/or ageing
5.5 Extraction
5.5.1 General
5.5.2 Steel
5.5.3 Other metallic materials
5.6 Specimen size
5.6.1 Transverse root and face bend tests of a butt weld (TFBB and TRBB)
5.6.2 Transverse side bend tests of a butt weld (SBB)
5.6.3 Longitudinal bend tests of a butt weld (LFBB and LRBB)
5.6.4 Face bend tests of cladding material without a butt weld (FBC)
5.6.5 Side bend tests of cladding material without a butt weld (SBC)
5.6.6 Transverse face bend tests of cladding material with a butt weld (FBCB)
5.6.7 Dimensions
5.6.8 Surface preparation
6 Conditions of testing
6.1 Etching
6.2 Testing
6.2.1 Testing with a former
6.2.2 Testing with a roller
6.3 Diameter of former and roller
6.4 Distance between rollers
6.5 Bending angle
6.6 Bending elongation
7 Test results
8 Test report
Annex A (informative) Example of a test report
Amendment 1
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
Related Information
Similar Standards
-
AS/NZS 2205.4.1:2019
Methods for destructive testing of welds in metal - Method 4.1: Fracture test -
AS/NZS 2205.5.1:2019
Methods for destructive testing of welds in metal - Method 5.1: Macroscopic and microscopic examination of welds -
AS/NZS 3545:2020
Welding and allied processes - Welding positions -
AS/NZS ISO 17637:2019
Non-destructive testing of welds - Visual testing of fusion-welded joints
AS/NZS 2205.3.1:2020 Destructive tests on welds in metallic materials Bend tests
Preface
Foreword
1 Scope
2 Terms and definitions
3 Principle
4 Symbols and abbreviated terms
4.1 Symbols
4.2 Abbreviated terms
4.3 Figures corresponding to the abbreviations
5 Preparation of test specimens
5.1 General
5.2 Location
5.3 Marking
5.4 Heat treatment and/or ageing
5.5 Extraction
5.5.1 General
5.5.2 Steel
5.5.3 Other metallic materials
5.6 Specimen size
5.6.1 Transverse root and face bend tests of a butt weld (TFBB and TRBB)
5.6.2 Transverse side bend tests of a butt weld (SBB)
5.6.3 Longitudinal bend tests of a butt weld (LFBB and LRBB)
5.6.4 Face bend tests of cladding material without a butt weld (FBC)
5.6.5 Side bend tests of cladding material without a butt weld (SBC)
5.6.6 Transverse face bend tests of cladding material with a butt weld (FBCB)
5.6.7 Dimensions
5.6.8 Surface preparation
6 Conditions of testing
6.1 Etching
6.2 Testing
6.2.1 Testing with a former
6.2.2 Testing with a roller
6.3 Diameter of former and roller
6.4 Distance between rollers
6.5 Bending angle
6.6 Bending elongation
7 Test results
8 Test report
Annex A (informative) Example of a test report
Amendment 1
AS/NZS 2205.3.1:2020
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.