AS/NZS 2161.7.2:2005
Occupational protective gloves - Protection against cuts and stabs by hand knives - Gloves and arm guards made of material other than chainmail
Specifies requirements for the design, cut resistance, penetration resistance, and ergonomic characteristics of cut resistant gloves, arm guards and protective sleeves made of materials other than chainmail and rigid metal and plastics. Identical to ISO 13999-2:2003.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$100.80 NZD
|
|
| HardCopy |
$112.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
ISO_13999-2;2003(E)-Character.pdf
C034531e.book
TitlePage - Protective clothing Gloves and arm guards protecting against cuts and stabs by hand...
TableofContent - Contents Page
Foreword - Foreword
Introduction - Introduction
Scope - 1 Scope
NormativeReference - 2 Normative references
Clause1 - 4 Requirements
Subclause2 - 4.1 Dimensions of the protective surface areas of gloves and arm guards and prote...
Subclause3 - 4.1.1 General
Subclause3 - 4.1.2 Gloves
Subclause3 - 4.1.3 Short cuff gloves
Subclause3 - 4.1.4 Long cuff gloves
Subclause3 - 4.1.5 Glove sizes
Subclause3 - 4.1.6 Flexible protective sleeves
Subclause3 - 4.1.7 Arm guard, or protective sleeve and glove assemblies
Subclause4 - 4.1.7.1 General
Subclause4 - 4.1.7.2 Coverage by fabric, leather or other flexible arm guards or protective sl...
Subclause4 - 4.1.7.3 Overlap between cuffs and protective sleeves
Subclause4 - 4.1.7.4 Arm guard and protective sleeve sizes
Subclause2 - 4.2 Construction
Subclause3 - 4.2.1 Dimensions of interstices
Subclause3 - 4.2.2 Attachment of arm guards and protective sleeves
Subclause3 - 4.2.3 Knife penetration and cut resistance
Subclause4 - 4.2.3.1 General
Subclause4 - 4.2.3.2 Fabric, leather, plastic of composite gloves, arm guards and protective s...
Subclause4 - 4.2.3.3 Cut resistance
Subclause2 - 4.3 Properties of materials
Subclause3 - 4.3.1 General
Subclause3 - 4.3.2 Cleaning temperature stability
Subclause2 - 4.4 Ergonomic requirements
Clause1 - 5 Test apparatus
UntitledSubclause2 - 5.1 General test apparatus
UntitledSubclause2 - 5.2 Test apparatus for assessing the attachment of arm guards and protect...
UntitledSubclause2 - 5.3 Impact-cut test apparatus
UntitledSubclause2 - 5.4 Cut-resistance test apparatus
Clause1 - 6 Test methods
Subclause2 - 6.1 General
Subclause2 - 6.2 Pre-treatment
Subclause2 - 6.3 Conditioning
Subclause2 - 6.4 Examination of coverage
Subclause2 - 6.5 Strength of attachment of arm guards and protective sleeves to gloves and the...
Subclause2 - 6.6 Impact cut testing
Subclause3 - 6.6.1 General
Subclause3 - 6.6.2 Samples and test positions
Subclause2 - 6.7 Cut resistance testing
Subclause3 - 6.7.1 General
Subclause3 - 6.7.2 Samples
Subclause3 - 6.7.3 Tests
Subclause2 - 6.8 Measurement of arm guard and protective sleeve length
Subclause2 - 6.9 Testing the dimensions of interstices
Clause1 - 7 Test report
Clause1 - 8 Marking
Clause1 - 9 Information for users and instructions for use
Clause1 - 10 Pictogram
AnnexNormative - Ergonomic testing
Clause1 - A.1 Principles
Clause1 - A.2 Test panel
Clause1 - A.3 Examination of products
Clause1 - A.4 Procedure for glove size verification
Clause1 - A.5 Procedure for arm guard and protective sleeve size verification
Clause1 - A.6 Grip-and-pull test
Subclause2 - A.6.1 Principle
Subclause2 - A.6.2 Apparatus
UntitledSubclause3 - A.6.2.1 Rigid work bench
UntitledSubclause3 - A.6.2.2 Horizontal stainless steel cylinder
UntitledSubclause3 - A.6.2.3 Force measuring system
UntitledSubclause3 - A.6.2.4 Hand rests
Subclause2 - A.6.3 Procedure
AnnexNormative - Test results Uncertainty of measurement
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
References
Occupational protective gloves - Protection against cuts and stabs by hand knives - Impact cut test for fabric, leather and other materials
Related Information
Similar Standards
-
AS/NZS 2161.10.1:2005
Occupational protective gloves - Protective gloves against chemicals and micro-organisms - Terminology and performance requirements
-
AS/NZS 2161.10.2:2005
Occupational protective gloves - Protective gloves against chemicals and micro-organisms - Determination of resistance to penetration
-
AS/NZS 2161.10.3:2005
Occupational protective gloves - Protective gloves against chemicals and micro-organisms - Determination of resistance to permeation by chemicals
-
AS/NZS 2161.7.3:2005
Occupational protective gloves - Protection against cuts and stabs by hand knives - Impact cut test for fabric, leather and other materials
ISO_13999-2;2003(E)-Character.pdf
C034531e.book
TitlePage - Protective clothing Gloves and arm guards protecting against cuts and stabs by hand...
TableofContent - Contents Page
Foreword - Foreword
Introduction - Introduction
Scope - 1 Scope
NormativeReference - 2 Normative references
Clause1 - 4 Requirements
Subclause2 - 4.1 Dimensions of the protective surface areas of gloves and arm guards and prote...
Subclause3 - 4.1.1 General
Subclause3 - 4.1.2 Gloves
Subclause3 - 4.1.3 Short cuff gloves
Subclause3 - 4.1.4 Long cuff gloves
Subclause3 - 4.1.5 Glove sizes
Subclause3 - 4.1.6 Flexible protective sleeves
Subclause3 - 4.1.7 Arm guard, or protective sleeve and glove assemblies
Subclause4 - 4.1.7.1 General
Subclause4 - 4.1.7.2 Coverage by fabric, leather or other flexible arm guards or protective sl...
Subclause4 - 4.1.7.3 Overlap between cuffs and protective sleeves
Subclause4 - 4.1.7.4 Arm guard and protective sleeve sizes
Subclause2 - 4.2 Construction
Subclause3 - 4.2.1 Dimensions of interstices
Subclause3 - 4.2.2 Attachment of arm guards and protective sleeves
Subclause3 - 4.2.3 Knife penetration and cut resistance
Subclause4 - 4.2.3.1 General
Subclause4 - 4.2.3.2 Fabric, leather, plastic of composite gloves, arm guards and protective s...
Subclause4 - 4.2.3.3 Cut resistance
Subclause2 - 4.3 Properties of materials
Subclause3 - 4.3.1 General
Subclause3 - 4.3.2 Cleaning temperature stability
Subclause2 - 4.4 Ergonomic requirements
Clause1 - 5 Test apparatus
UntitledSubclause2 - 5.1 General test apparatus
UntitledSubclause2 - 5.2 Test apparatus for assessing the attachment of arm guards and protect...
UntitledSubclause2 - 5.3 Impact-cut test apparatus
UntitledSubclause2 - 5.4 Cut-resistance test apparatus
Clause1 - 6 Test methods
Subclause2 - 6.1 General
Subclause2 - 6.2 Pre-treatment
Subclause2 - 6.3 Conditioning
Subclause2 - 6.4 Examination of coverage
Subclause2 - 6.5 Strength of attachment of arm guards and protective sleeves to gloves and the...
Subclause2 - 6.6 Impact cut testing
Subclause3 - 6.6.1 General
Subclause3 - 6.6.2 Samples and test positions
Subclause2 - 6.7 Cut resistance testing
Subclause3 - 6.7.1 General
Subclause3 - 6.7.2 Samples
Subclause3 - 6.7.3 Tests
Subclause2 - 6.8 Measurement of arm guard and protective sleeve length
Subclause2 - 6.9 Testing the dimensions of interstices
Clause1 - 7 Test report
Clause1 - 8 Marking
Clause1 - 9 Information for users and instructions for use
Clause1 - 10 Pictogram
AnnexNormative - Ergonomic testing
Clause1 - A.1 Principles
Clause1 - A.2 Test panel
Clause1 - A.3 Examination of products
Clause1 - A.4 Procedure for glove size verification
Clause1 - A.5 Procedure for arm guard and protective sleeve size verification
Clause1 - A.6 Grip-and-pull test
Subclause2 - A.6.1 Principle
Subclause2 - A.6.2 Apparatus
UntitledSubclause3 - A.6.2.1 Rigid work bench
UntitledSubclause3 - A.6.2.2 Horizontal stainless steel cylinder
UntitledSubclause3 - A.6.2.3 Force measuring system
UntitledSubclause3 - A.6.2.4 Hand rests
Subclause2 - A.6.3 Procedure
AnnexNormative - Test results Uncertainty of measurement
AS/NZS 2161.7.2:2005
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.