AS/NZS 2040.1:2005
Performance of household electrical appliances - Clothes washing machines - Part 1: Methods for measuring performance, energy and water consumption
Specifies the method of determining the performance characteristics of electric clothes washing machines intended for household and similar use. This Standard is not intended for the evaluation or comparison of the performance of detergents or other laundry aids. This Standard does not specify safety requirements. Based on IEC 60456:2003 with major modifications.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$186.30 NZD
|
|
| HardCopy |
$207.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 2040.1:2005 PERFORMANCE OF HOUSEHOLD ELECTRICAL APPLIANCES-CLOTHES WASHING MACHINES - METHODS FOR MEASURING...
PREFACE
CONTENTS
FOREWORD
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 OBJECTIVE
1.3 REFERENCED DOCUMENTS
1.4 DEFINITIONS
1.4.1 Clothes washing machine
1.4.2 Cycle
1.4.3 Cycle time
1.4.4 Delay start mode
1.4.5 Drum type machine
1.4.6 End of cycle mode
1.4.7 Off mode
1.4.8 Operation
1.4.9 Program
1.4.10 Program time
1.4.11 Rated load capacity
1.4.12 Reference machine
1.4.13 Rinse liquor
1.4.14 Severity of washing action swatch
1.4.15 Shall
1.4.16 Should
1.4.17 Soil swatch
1.4.18 Standby power
1.4.19 Test load mass
1.4.20 Test program
1.4.21 Tested energy consumption (Et)
1.4.22 Automatic
1.4.23 Non-automatic
1.4.24 Manufacturer's instructions
1.5 ROUNDING
SECTION 2 MEASUREMENTS TO BE PERFORMED AND REQUIREMENTS FOR TESTING
2.1 GENERAL
2.2 TEST CONDITIONS, INSTRUMENTATION AND MATERIALS
2.3 PREPARATION OF A CLOTHES WASHING MACHINE FOR TESTING
2.4 GENERAL TEST PROCEDURES
2.5 PREPARATION AND LOADING OF STANDARD TEST LOADS
2.6 TEST FOR PERCENTAGE SOIL REMOVAL
2.7 DETERMINATION OF ENERGY CONSUMPTION, WATER CONSUMPTION AND STANDBY POWER
2.8 DETERMINATION OF WATER EXTRACTION INDEX
2.9 DETERMINATION OF SEVERITY OF WASHING ACTION INDEX
2.10 VIBRATION
2.11 SPECTROPHOTOMETER REQUIREMENTS AND MEASUREMENTS AND DETERMINATION OF PERCENTAGE SOIL REMOVAL
2.12 REQUIREMENTS FOR REFERENCE MACHINE
2.13 DETERMINATION OF WHITENESS RETENTION
2.14 DETERMINATION OF RINSE PERFORMANCE
SECTION 3 USE OF REFERENCE MACHINES
3.1 GENERAL
3.2 PROGRAM
3.3 TEST CONDITIONS
3.4 USE OF REFERENCE MACHINE
3.5 REFERENCE MACHINE LOG
3.6 RECORD OF RESULTS
3.7 CHECKS AND REPAIRS
SECTION 4 PERFORMANCE REQUIREMENTS
4.1 GENERAL
4.2 WATER PRESSURE
4.3 PERCENTAGE SOIL REMOVAL AND STANDARD DEVIATION
4.4 WATER CONSUMPTION
4.5 WATER EXTRACTION INDEX
4.6 SEVERITY OF WASHING ACTION INDEX
4.7 VIBRATION DURING WATER EXTRACTION (SPIN DRYING)
4.8 RINSE PERFORMANCE
4.9 WOOL WASH PROGRAM
SECTION 5 REQUIREMENTS FOR ACCOMPANYING INFORMATION
5.1 GENERAL
5.2 RATED LOAD CAPACITY
5.3 WATER CONSUMPTION
5.4 PROGRAM
5.5 OTHER
APPENDIX A - TEST CONDITIONS, INSTRUMENTATION AND MATERIALS
A1 GENERAL
A2 ACCURACY AND PRECISION OF MEASUREMENTS
A3 AMBIENT CONDITIONS
A4 WATER SUPPLY
A5 WATER HARDNESS
A6 ELECTRICITY SUPPLY
A7 MEASUREMENT ACCURACIES AND INSTRUMENTS
A7.1 Mass
A7.2 Temperature
A7.3 Electrical energy consumption
A7.4 Length
A7.5 Time
A7.6 Water consumption
A8 DETERGENT
A8.1 Detergent for other than drum type machines
A8.2 Detergent for drum type machines
A8.3 Source of detergent
A8.4 Storage and maximum age
A9 ANTI-SUDSING AGENT
A10 SOIL REMOVAL SWATCHES
A11 SEVERITY OF WASHING SWATCHES
A12 STANDARD TEST LOAD
A13 SOURCES OF MATERIALS
A14 BUILT-IN CLOTHES WASHER TEST ENCLOSURE
A14.1 General
A14.2 Materials
A14.3 Dimensions
A14.4 Construction
A15 VIBRATION WALKING TEST SURFACE
A16 SANDBAGS FOR VIBRATION WALKING TEST
A17 ADDITIONAL INFORMATION FOR TESTING
APPENDIX B - PREPARATION OF A CLOTHES WASHING MACHINE FOR TESTING AND GENERAL TEST PROCEDURES
B1 SCOPE
B2 CONDITION, INSTALLATION AND USE OF MACHINE
B3 FILTERS
B4 TEST PROGRAM
B4.1 General
B4.2 Machines with pre-set programs
B4.3 Semi-automatic washing machines
B4.4 Twin-tub washing machines
B5 INITIAL TEMPERATURE OF MACHINE
B6 TEST ENCLOSURE
B7 DETERGENT
B7.1 Type to be used
B7.2 Quantity
B7.3 Adding detergent
B8 USE OF AN ANTI-SUDSING AGENT
B9 MEASUREMENT OF INPUTS
B10 MASS OF TEST LOAD TO BE USED
B11 PRE-CONDITIONING OF TEST LOADS
B12 RECONDITIONING OF TEST LOAD COMPONENTS
B13 LIFE OF TEST LOAD COMPONENTS
APPENDIX C - PREPARATION AND METHOD OF LOADING STANDARD TEST LOADS
C1 SCOPE
C2 STANDARD MIXED COTTON TEST LOADS
C2.1 General
C2.2 Mass of test load
C2.3 Bone-dry mass of test load
C3 ATTACHMENT OF SWATCHES
C3.1 Total number of swatches required
C3.2 Number of swatches per load component
C3.3 Fixing devices
C3.4 Fixing and positioning
C3.5 Location of the swatches
C4 PROCEDURE FOR LOADING MACHINE
C4.1 Preparation of items for loading
C4.2 Order of loading
C4.3 Method of placement
APPENDIX D - DETERMINATION OF PERCENTAGE SOIL REMOVAL
D1 SCOPE
D2 APPLICATION
D3 TEST CONDITIONS
D4 PRINCIPLE
D5 PROCEDURE
D6 REPORT
D7 VALIDITY
APPENDIX E - DETERMINATION OF ENERGY AND WATER CONSUMPTION, TIME AND STANDBY POWER
E1 SCOPE
E2 APPLICATION
E3 TEST CONDITIONS
E4 PRINCIPLE
E5 TEST PROCEDURE-PROGRAM MEASUREMENTS
E6 TEST PROCEDURE-POST PROGRAM ENERGY AND CYCLE TIME
E7 TEST PROCEDURE-DELAY START MODE
E8 TEST PROCEDURE-OFF MODE
E9 DETERMINATION OF TESTED ENERGY CONSUMPTION AND WATER CONSUMPTION
E9.1 General
E9.2 Determination of water consumption
E9.3 Cold water correction energy (Ec)
E9.4 Hot water supply energy (Eh)
E9.5 Energy contained in detergent solution
E10 DETERMINATION OF STANDBY POWER
E11 REPORT
APPENDIX F - DETERMINATION OF WATER EXTRACTION INDEX
F1 SCOPE
F2 APPLICATION
F3 TEST CONDITIONS
F4 PROGRAM
F5 TEST PROCEDURE
F5.1 Procedure
F6 REPORT
APPENDIX G - DETERMINATION OF SEVERITY OF WASHING ACTION INDEX
G1 SCOPE
G2 APPLICATION
G3 TEST CONDITIONS
G4 PRINCIPLE
G5 PROCEDURE
G6 REPORT
G7 VALIDITY
APPENDIX H - VIBRATION WALKING TEST
H1 SCOPE
H2 PRINCIPLE
H3 APPLICATION
H4 TEST CONDITIONS
H4.1 General
H4.2 Apparatus and materials
H5 TEST PROCEDURE
H6 REPORT
APPENDIX I - SPECTROPHOTOMETER REQUIREMENTS, MEASUREMENTS AND CALCULATION OF PERCENTAGE SOIL REMOVAL
I1 SPECTROPHOTOMETERS
I2 STANDARDIZATION
I3 SOIL SWATCH READING PROCEDURE
I4 CALCULATION OF PERCENTAGE SOIL REMOVAL
I5 NORMALIZATION OF RESULTS
I6 DATA AND CALCULATION FORMS
APPENDIX J - REQUIREMENTS FOR REFERENCE MACHINES
J1 GENERAL
J2 WATER HEATING CAPABILITY
J3 SOIL REMOVAL
J4 WATER EXTRACTION INDEX
J5 SEVERITY OF WASHING INDEX
J6 RINSE PERFORMANCE
APPENDIX K - DETERMINATION OF PERCENTAGE WHITENESS RETENTION
K1 SCOPE
K2 TEST CONDITIONS
K3 PRINCIPLE
K4 APPLICATION
K5 TEST MATERIALS
K5.1 General
K5.2 Whiteness swatches
K5.3 Black clay
K6 PROCEDURE
K7 REPORT
APPENDIX L - CLOTHES WASHING MACHINE TEST REPORT FORMAT
L1 SCOPE
L2 FORM FOR TEST DATA
APPENDIX M - DETERMINATION OF RINSE PERFORMANCE
M1 SCOPE
M2 APPLICATION
M3 PRINCIPLE
M4 TEST CONDITIONS, EQUIPMENT AND MATERIALS
M4.1 General
M4.2 Equipment
M4.3 Materials
M5 PROCEDURE
M5.1 Conditioning of the load
M5.2 Preparation of the marker dose
M5.3 Dosing of the marker
M5.4 Conduct a standard soil removal test
M5.5 Calculate the mass of retained moisture in the load
M5.6 Sampling procedure for rinse liquor
M5.7 Measurement of PBIS concentration in the supply water and extracted liquor samples
M5.8 Calculation of rinse performance score
M6 Not applicable
M7 Report
APPENDIX N - MEASUREMENT OF PBIS CONCENTRATION IN THE SUPPLY WATER AND EXTRACTED LIQUOR SAMPLES
N1 SCOPE
N2 SUMMARY OF TEST METHOD
N3 APPARATUS AND REAGENTS
N3.1 Spectrophotometer
N3.2 Spectrophotometer cells
N3.3 Reagents and glassware
N3.4 Balance
N4 PROCEDURE
N4.1 Glassware
N4.2 Calibration procedure for each PBIS batch
N4.3 Preparation of standard solutions
N4.4 Determination of PBIS in supply water and extracted liquor samples
N5 LINEAR REGRESSION
APPENDIX O - EXAMPLES OF STANDBY MODES
Amendments
Previous versions
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
Related Information
Energy Efficiency (Energy Using Products) Regulations 2002
Ministry: Ministry of Business Innovation and Employment - Digital, Communications and Transformation (RSM)
Section: Schedule 2
Citation context:Listed as a testing standard
Consumer Information Standards (Water Efficiency) Regulations 2010 - Revoked
Ministry: Ministry of Business, Innovation, and Employment - Te Whakatairanga Service Delivery
Section: 3 Interpretation
Citation context:AS/NZS 2040.1 means the Australia/New Zealand Standard AS/NZS 2040.1:2005: Performance of household electrical appliances - Clothes washing machines, Part 1: Methods for measuring performance, energy and water consumption (ISBN 0–7337–7059–2). Rated load
Consumer Information Standards (Water Efficiency) Regulations 2017
Ministry: Ministry of Business, Innovation, and Employment - Te Whakatairanga Service Delivery
Section: Interpretation
Citation context:AS/NZS 2040.1 means the Australia/New Zealand Standard AS/NZS 2040.1:2005: Performance of household electrical appliances—Clothes washing machines—Part 1: Methods for measuring performance, energy and water consumption... ...rated load capacity means, in relation to a clothes washing machine, the maximum mass of normally soiled cotton (to the nearest 0.5 kg) that the manufacturer claims can be treated by the clothes washing machine in accordance with the requirements of AS/NZS 2040.1
Similar Standards
-
AS/NZS 2040.1:2021
Performance of household electrical appliances - Dishwashers, Part 1: Methods for measuring performance, energy and water consumption
-
AS/NZS 2040.2:2021
Performance of household electrical appliances - Clothes washing machines, Part 2: Energy efficiency labelling requirements
-
AS/NZS 2442.1 Supplement 3:1996
Performance of household electrical appliances - Rotary clothes dryers - Energy consumption and performance - Test material - Pillow case -
AS/NZS 2442.1 Supplement 4:1996
Performance of household electrical appliances - Rotary clothes dryers - Energy consumption and performance - Test material - Bath towel
AS/NZS 2040.1:2005 PERFORMANCE OF HOUSEHOLD ELECTRICAL APPLIANCES-CLOTHES WASHING MACHINES - METHODS FOR MEASURING...
PREFACE
CONTENTS
FOREWORD
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 OBJECTIVE
1.3 REFERENCED DOCUMENTS
1.4 DEFINITIONS
1.4.1 Clothes washing machine
1.4.2 Cycle
1.4.3 Cycle time
1.4.4 Delay start mode
1.4.5 Drum type machine
1.4.6 End of cycle mode
1.4.7 Off mode
1.4.8 Operation
1.4.9 Program
1.4.10 Program time
1.4.11 Rated load capacity
1.4.12 Reference machine
1.4.13 Rinse liquor
1.4.14 Severity of washing action swatch
1.4.15 Shall
1.4.16 Should
1.4.17 Soil swatch
1.4.18 Standby power
1.4.19 Test load mass
1.4.20 Test program
1.4.21 Tested energy consumption (Et)
1.4.22 Automatic
1.4.23 Non-automatic
1.4.24 Manufacturer's instructions
1.5 ROUNDING
SECTION 2 MEASUREMENTS TO BE PERFORMED AND REQUIREMENTS FOR TESTING
2.1 GENERAL
2.2 TEST CONDITIONS, INSTRUMENTATION AND MATERIALS
2.3 PREPARATION OF A CLOTHES WASHING MACHINE FOR TESTING
2.4 GENERAL TEST PROCEDURES
2.5 PREPARATION AND LOADING OF STANDARD TEST LOADS
2.6 TEST FOR PERCENTAGE SOIL REMOVAL
2.7 DETERMINATION OF ENERGY CONSUMPTION, WATER CONSUMPTION AND STANDBY POWER
2.8 DETERMINATION OF WATER EXTRACTION INDEX
2.9 DETERMINATION OF SEVERITY OF WASHING ACTION INDEX
2.10 VIBRATION
2.11 SPECTROPHOTOMETER REQUIREMENTS AND MEASUREMENTS AND DETERMINATION OF PERCENTAGE SOIL REMOVAL
2.12 REQUIREMENTS FOR REFERENCE MACHINE
2.13 DETERMINATION OF WHITENESS RETENTION
2.14 DETERMINATION OF RINSE PERFORMANCE
SECTION 3 USE OF REFERENCE MACHINES
3.1 GENERAL
3.2 PROGRAM
3.3 TEST CONDITIONS
3.4 USE OF REFERENCE MACHINE
3.5 REFERENCE MACHINE LOG
3.6 RECORD OF RESULTS
3.7 CHECKS AND REPAIRS
SECTION 4 PERFORMANCE REQUIREMENTS
4.1 GENERAL
4.2 WATER PRESSURE
4.3 PERCENTAGE SOIL REMOVAL AND STANDARD DEVIATION
4.4 WATER CONSUMPTION
4.5 WATER EXTRACTION INDEX
4.6 SEVERITY OF WASHING ACTION INDEX
4.7 VIBRATION DURING WATER EXTRACTION (SPIN DRYING)
4.8 RINSE PERFORMANCE
4.9 WOOL WASH PROGRAM
SECTION 5 REQUIREMENTS FOR ACCOMPANYING INFORMATION
5.1 GENERAL
5.2 RATED LOAD CAPACITY
5.3 WATER CONSUMPTION
5.4 PROGRAM
5.5 OTHER
APPENDIX A - TEST CONDITIONS, INSTRUMENTATION AND MATERIALS
A1 GENERAL
A2 ACCURACY AND PRECISION OF MEASUREMENTS
A3 AMBIENT CONDITIONS
A4 WATER SUPPLY
A5 WATER HARDNESS
A6 ELECTRICITY SUPPLY
A7 MEASUREMENT ACCURACIES AND INSTRUMENTS
A7.1 Mass
A7.2 Temperature
A7.3 Electrical energy consumption
A7.4 Length
A7.5 Time
A7.6 Water consumption
A8 DETERGENT
A8.1 Detergent for other than drum type machines
A8.2 Detergent for drum type machines
A8.3 Source of detergent
A8.4 Storage and maximum age
A9 ANTI-SUDSING AGENT
A10 SOIL REMOVAL SWATCHES
A11 SEVERITY OF WASHING SWATCHES
A12 STANDARD TEST LOAD
A13 SOURCES OF MATERIALS
A14 BUILT-IN CLOTHES WASHER TEST ENCLOSURE
A14.1 General
A14.2 Materials
A14.3 Dimensions
A14.4 Construction
A15 VIBRATION WALKING TEST SURFACE
A16 SANDBAGS FOR VIBRATION WALKING TEST
A17 ADDITIONAL INFORMATION FOR TESTING
APPENDIX B - PREPARATION OF A CLOTHES WASHING MACHINE FOR TESTING AND GENERAL TEST PROCEDURES
B1 SCOPE
B2 CONDITION, INSTALLATION AND USE OF MACHINE
B3 FILTERS
B4 TEST PROGRAM
B4.1 General
B4.2 Machines with pre-set programs
B4.3 Semi-automatic washing machines
B4.4 Twin-tub washing machines
B5 INITIAL TEMPERATURE OF MACHINE
B6 TEST ENCLOSURE
B7 DETERGENT
B7.1 Type to be used
B7.2 Quantity
B7.3 Adding detergent
B8 USE OF AN ANTI-SUDSING AGENT
B9 MEASUREMENT OF INPUTS
B10 MASS OF TEST LOAD TO BE USED
B11 PRE-CONDITIONING OF TEST LOADS
B12 RECONDITIONING OF TEST LOAD COMPONENTS
B13 LIFE OF TEST LOAD COMPONENTS
APPENDIX C - PREPARATION AND METHOD OF LOADING STANDARD TEST LOADS
C1 SCOPE
C2 STANDARD MIXED COTTON TEST LOADS
C2.1 General
C2.2 Mass of test load
C2.3 Bone-dry mass of test load
C3 ATTACHMENT OF SWATCHES
C3.1 Total number of swatches required
C3.2 Number of swatches per load component
C3.3 Fixing devices
C3.4 Fixing and positioning
C3.5 Location of the swatches
C4 PROCEDURE FOR LOADING MACHINE
C4.1 Preparation of items for loading
C4.2 Order of loading
C4.3 Method of placement
APPENDIX D - DETERMINATION OF PERCENTAGE SOIL REMOVAL
D1 SCOPE
D2 APPLICATION
D3 TEST CONDITIONS
D4 PRINCIPLE
D5 PROCEDURE
D6 REPORT
D7 VALIDITY
APPENDIX E - DETERMINATION OF ENERGY AND WATER CONSUMPTION, TIME AND STANDBY POWER
E1 SCOPE
E2 APPLICATION
E3 TEST CONDITIONS
E4 PRINCIPLE
E5 TEST PROCEDURE-PROGRAM MEASUREMENTS
E6 TEST PROCEDURE-POST PROGRAM ENERGY AND CYCLE TIME
E7 TEST PROCEDURE-DELAY START MODE
E8 TEST PROCEDURE-OFF MODE
E9 DETERMINATION OF TESTED ENERGY CONSUMPTION AND WATER CONSUMPTION
E9.1 General
E9.2 Determination of water consumption
E9.3 Cold water correction energy (Ec)
E9.4 Hot water supply energy (Eh)
E9.5 Energy contained in detergent solution
E10 DETERMINATION OF STANDBY POWER
E11 REPORT
APPENDIX F - DETERMINATION OF WATER EXTRACTION INDEX
F1 SCOPE
F2 APPLICATION
F3 TEST CONDITIONS
F4 PROGRAM
F5 TEST PROCEDURE
F5.1 Procedure
F6 REPORT
APPENDIX G - DETERMINATION OF SEVERITY OF WASHING ACTION INDEX
G1 SCOPE
G2 APPLICATION
G3 TEST CONDITIONS
G4 PRINCIPLE
G5 PROCEDURE
G6 REPORT
G7 VALIDITY
APPENDIX H - VIBRATION WALKING TEST
H1 SCOPE
H2 PRINCIPLE
H3 APPLICATION
H4 TEST CONDITIONS
H4.1 General
H4.2 Apparatus and materials
H5 TEST PROCEDURE
H6 REPORT
APPENDIX I - SPECTROPHOTOMETER REQUIREMENTS, MEASUREMENTS AND CALCULATION OF PERCENTAGE SOIL REMOVAL
I1 SPECTROPHOTOMETERS
I2 STANDARDIZATION
I3 SOIL SWATCH READING PROCEDURE
I4 CALCULATION OF PERCENTAGE SOIL REMOVAL
I5 NORMALIZATION OF RESULTS
I6 DATA AND CALCULATION FORMS
APPENDIX J - REQUIREMENTS FOR REFERENCE MACHINES
J1 GENERAL
J2 WATER HEATING CAPABILITY
J3 SOIL REMOVAL
J4 WATER EXTRACTION INDEX
J5 SEVERITY OF WASHING INDEX
J6 RINSE PERFORMANCE
APPENDIX K - DETERMINATION OF PERCENTAGE WHITENESS RETENTION
K1 SCOPE
K2 TEST CONDITIONS
K3 PRINCIPLE
K4 APPLICATION
K5 TEST MATERIALS
K5.1 General
K5.2 Whiteness swatches
K5.3 Black clay
K6 PROCEDURE
K7 REPORT
APPENDIX L - CLOTHES WASHING MACHINE TEST REPORT FORMAT
L1 SCOPE
L2 FORM FOR TEST DATA
APPENDIX M - DETERMINATION OF RINSE PERFORMANCE
M1 SCOPE
M2 APPLICATION
M3 PRINCIPLE
M4 TEST CONDITIONS, EQUIPMENT AND MATERIALS
M4.1 General
M4.2 Equipment
M4.3 Materials
M5 PROCEDURE
M5.1 Conditioning of the load
M5.2 Preparation of the marker dose
M5.3 Dosing of the marker
M5.4 Conduct a standard soil removal test
M5.5 Calculate the mass of retained moisture in the load
M5.6 Sampling procedure for rinse liquor
M5.7 Measurement of PBIS concentration in the supply water and extracted liquor samples
M5.8 Calculation of rinse performance score
M6 Not applicable
M7 Report
APPENDIX N - MEASUREMENT OF PBIS CONCENTRATION IN THE SUPPLY WATER AND EXTRACTED LIQUOR SAMPLES
N1 SCOPE
N2 SUMMARY OF TEST METHOD
N3 APPARATUS AND REAGENTS
N3.1 Spectrophotometer
N3.2 Spectrophotometer cells
N3.3 Reagents and glassware
N3.4 Balance
N4 PROCEDURE
N4.1 Glassware
N4.2 Calibration procedure for each PBIS batch
N4.3 Preparation of standard solutions
N4.4 Determination of PBIS in supply water and extracted liquor samples
N5 LINEAR REGRESSION
APPENDIX O - EXAMPLES OF STANDBY MODES
Amendments
Previous versions
AS/NZS 2040.1:2005
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.