AS/NZS 1754:2010
Child restraint systems for use in motor vehicles
Specifies the requirements for restraining devices for child occupants of passenger cars to reduce the risk of bodily injury in a vehicle impact.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$227.70 NZD
|
|
| HardCopy |
$253.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 OBJECTIVE
1.3 REFERENCED DOCUMENTS
1.4 DEFINITIONS
1.4.1 Accessories
1.4.2 Actuation surface
1.4.3 Adjuster
1.4.4 Airway region
1.4.5 Anchorage components
1.4.6 Anchorage point
1.4.7 Attachment bolt
1.4.8 Attachment clip
1.4.9 Authority
1.4.10 Booster seat
1.4.11 Chair
1.4.12 Child restraint
1.4.13 Converter
1.4.14 Crotch strap
1.4.15 Downward
1.4.16 Enclosing restraint
1.4.17 Extension strap
1.4.18 Fabric
1.4.19 Flame spread time
1.4.20 Forward
1.4.21 Harness
1.4.22 Leg straps
1.4.23 Means of adjustment
1.4.24 Pelvic area
1.4.25 Permanently attached
1.4.26 Permanently fixed
1.4.27 Permanently fixed in position
1.4.28 Quick-release device
1.4.29 Rearward
1.4.30 Rigid component and material
1.4.31 Roping
1.4.32 Securing device
1.4.33 Set screw
1.4.34 Shall
1.4.35 Should
1.4.36 Splitter plate
1.4.37 Strap
1.4.38 Submarining
1.4.39 Surface burning time
1.4.40 Swing ticket
1.4.41 Tilt-lock adjustment device
1.4.42 Transversely installed
1.4.43 Trims
1.4.44 Upper anchorage strap
1.4.45 Upper anchor fitting
1.4.46 Upward
1.5 TYPE DESIGNATION
SECTION 2 MATERIALS
2.1 WEBBING
2.2 METAL PARTS OR COATED METAL PARTS
2.3 FLAMMABILITY
2.3.1 Fabrics and padding materials
2.3.2 Other chair materials
2.4 TOXICITY
2.5 PLASTICS STABILIZATION
SECTION 3 DESIGN AND CONSTRUCTION
3.1 EXTENT OF PROTECTION
3.2 RESTRAINT SYSTEM
3.2.1 General requirements
3.2.2 Type A1 child restraints
3.2.3 Type A2 child restraints
3.2.4 Type A3 child restraints
3.2.5 Type B child restraints
3.2.6 Type C child restraints
3.2.7 Type D child restraints
3.2.8 Type E child restraints
3.2.9 Type F child restraints
3.3 SECURING DEVICE
3.4 QUICKRELEASE DEVICE
3.4.1 General
3.4.2 Type A1, Type A2, Type A3, Type B and Type D child restraints
3.5 ANCHORING AND ATTACHMENT SYSTEM
3.5.1 Provision of anchoring system
3.5.2 Requirements for the anchorage components
3.6 RIGID COMPONENTS
3.7 ACCESSORIES
3.7.1 General
3.7.2 Removable liners and covers
3.8 ADJUSTERS
3.9 CORROSION PROTECTION OF METAL PARTS
3.10 DURABILITY OF COMPONENTS
3.11 WORKMANSHIP AND FINISH
3.11.1 General
3.11.2 Hazardous sharp edges and hazardous sharp points
3.11.3 Ingestion or inhalation hazards
3.11.4 Projections
3.12 CHILD RESTRAINTS DESIGNED FOR CHILDREN WITH DISABILITIES
SECTION 4 PERFORMANCE
4.1 GENERAL
4.2 HAZARDOUS THROAT CONTACT IN ABNORMAL SITUATIONS
4.3 DYNAMIC PERFORMANCE OF THE CHILD RESTRAINT
4.3.1 General requirements
4.3.2 Type A1 child restraints
4.3.3 Type A2 child restraints
4.3.4 Type A3 child restraints
4.3.5 Type B child restraints
4.3.6 Type D child restraints
4.3.7 Type E child restraints
4.3.8 Type F child restraints
4.4 DYNAMIC PERFORMANCE OF UPPER ANCHORAGE COMPONENTS
4.5 DYNAMIC PERFORMANCE OF UPPER ANCHORAGE EXTENSION STRAPS
SECTION 5 TESTING
5.1 RECLINING CHILD RESTRAINTS
5.2 TEST DUMMIES
5.2.1 General
5.2.2 Test dummies for dynamic testing
5.2.3 Test dummies for determining the force required to operate adjusters in accordance with Clause 3.8(c)
5.3 CALIBRATION OF TNO TEST DUMMIES
5.4 CHILD RESTRAINT TEST SPECIMEN
5.5 REMOVABLE ITEMS
SECTION 6 INFORMATIVE LABELLING, INSTRUCTIONS, MARKING AND PACKAGING
6.1 GENERAL LABELLING REQUIREMENTS
6.1.1 Scope of section
6.1.2 Language
6.1.3 Print size
6.1.4 Illustrations
6.1.5 Durability of marking
6.1.6 Adhesion of labels
6.1.7 Use of product name
6.1.8 Standard warning format
6.2 GENERAL PACKAGING REQUIREMENTS
6.2.1 Product protection
6.2.2 Consumer protection
6.2.3 Flexible plastic packaging
6.3 INFORMATION TO BE SUPPLIED ON PACKAGING
6.4 INFORMATION TO BE SUPPLIED IN AN INSTRUCTION BOOKLET OR SHEET
6.4.1 General information
6.4.2 Instructions for installation
6.4.3 Instructions for use
6.4.4 Instructions for maintenance
6.5 INFORMATION TO BE SUPPLIED ON A SWING TICKET OR LABEL
6.6 MARKING
6.7 SHOULDER HEIGHT MARKING
6.8 MARKING ON FABRIC COVERS
APPENDIX A - CLOTHING FOR TEST DUMMIES
APPENDIX B - SPACERS FOR ATTACHMENT TO TEST DUMMIES
APPENDIX C - INSTRUCTIONS TO BE SUPPLIED FOR INSTALLATION OF THE UPPER ANCHORAGE FITTINGS
C1 FOR CARS FITTED WITH A CHILD RESTRAINT ANCHORAGE POINT
C2 FOR CARS NOT FITTED WITH A CHILD RESTRAINT ANCHORAGE POINT
C2.1 For sedans only
C2.2 For vehicles other than sedans
APPENDIX D - RECOMMENDED DUMMY TYPES
APPENDIX E - EXPLANATION OF SHOULDER DESIGNATION
E1 GENERAL
E2 INDICATIVE ANTHROPOMETRIC DATA
E3 RELATED INFORMATION
Amendments
Previous versions
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
References
Methods of testing child restraints - Method 3: Dynamic testing of upper anchorage components
Methods of testing child restraints - Method 5: Determination of quick-release device actuation force
Methods of testing child restraints - Method 6: Determination of recline angle
Related Information
Civil Aviation Rules Part 91 General Operating and Flight Rules
Ministry: Civil Aviation Authority of NZ
Section: Appendix A.5(3)
Citation context:A child restraint system must - ...(3) meet the requirements of - ...(iii) Australia/New Zealand Standard AS/NZS/1754; or...
Land Transport Rule 32017: Vehicle Equipment 2004
Ministry: NZ Transport Agency
Section: 2.9(4)(a)
Citation context:The approved standards for child restraints are: (a) Australian Standard/New Zealand Standard 1754 Child restraint systems for use in motor vehicles;...
Similar Standards
-
AS/NZS 1753:2015
Webbing for restraining devices for occupants of motor vehicles -
AS/NZS 1754:2013
Child restraint systems for use in motor vehicles -
AS/NZS 1754:2013 A1
Child restraint systems for use in motor vehicles: Amendment 1:2016 -
AS/NZS 2596:2003
Seat belt assemblies for motor vehicles
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 OBJECTIVE
1.3 REFERENCED DOCUMENTS
1.4 DEFINITIONS
1.4.1 Accessories
1.4.2 Actuation surface
1.4.3 Adjuster
1.4.4 Airway region
1.4.5 Anchorage components
1.4.6 Anchorage point
1.4.7 Attachment bolt
1.4.8 Attachment clip
1.4.9 Authority
1.4.10 Booster seat
1.4.11 Chair
1.4.12 Child restraint
1.4.13 Converter
1.4.14 Crotch strap
1.4.15 Downward
1.4.16 Enclosing restraint
1.4.17 Extension strap
1.4.18 Fabric
1.4.19 Flame spread time
1.4.20 Forward
1.4.21 Harness
1.4.22 Leg straps
1.4.23 Means of adjustment
1.4.24 Pelvic area
1.4.25 Permanently attached
1.4.26 Permanently fixed
1.4.27 Permanently fixed in position
1.4.28 Quick-release device
1.4.29 Rearward
1.4.30 Rigid component and material
1.4.31 Roping
1.4.32 Securing device
1.4.33 Set screw
1.4.34 Shall
1.4.35 Should
1.4.36 Splitter plate
1.4.37 Strap
1.4.38 Submarining
1.4.39 Surface burning time
1.4.40 Swing ticket
1.4.41 Tilt-lock adjustment device
1.4.42 Transversely installed
1.4.43 Trims
1.4.44 Upper anchorage strap
1.4.45 Upper anchor fitting
1.4.46 Upward
1.5 TYPE DESIGNATION
SECTION 2 MATERIALS
2.1 WEBBING
2.2 METAL PARTS OR COATED METAL PARTS
2.3 FLAMMABILITY
2.3.1 Fabrics and padding materials
2.3.2 Other chair materials
2.4 TOXICITY
2.5 PLASTICS STABILIZATION
SECTION 3 DESIGN AND CONSTRUCTION
3.1 EXTENT OF PROTECTION
3.2 RESTRAINT SYSTEM
3.2.1 General requirements
3.2.2 Type A1 child restraints
3.2.3 Type A2 child restraints
3.2.4 Type A3 child restraints
3.2.5 Type B child restraints
3.2.6 Type C child restraints
3.2.7 Type D child restraints
3.2.8 Type E child restraints
3.2.9 Type F child restraints
3.3 SECURING DEVICE
3.4 QUICKRELEASE DEVICE
3.4.1 General
3.4.2 Type A1, Type A2, Type A3, Type B and Type D child restraints
3.5 ANCHORING AND ATTACHMENT SYSTEM
3.5.1 Provision of anchoring system
3.5.2 Requirements for the anchorage components
3.6 RIGID COMPONENTS
3.7 ACCESSORIES
3.7.1 General
3.7.2 Removable liners and covers
3.8 ADJUSTERS
3.9 CORROSION PROTECTION OF METAL PARTS
3.10 DURABILITY OF COMPONENTS
3.11 WORKMANSHIP AND FINISH
3.11.1 General
3.11.2 Hazardous sharp edges and hazardous sharp points
3.11.3 Ingestion or inhalation hazards
3.11.4 Projections
3.12 CHILD RESTRAINTS DESIGNED FOR CHILDREN WITH DISABILITIES
SECTION 4 PERFORMANCE
4.1 GENERAL
4.2 HAZARDOUS THROAT CONTACT IN ABNORMAL SITUATIONS
4.3 DYNAMIC PERFORMANCE OF THE CHILD RESTRAINT
4.3.1 General requirements
4.3.2 Type A1 child restraints
4.3.3 Type A2 child restraints
4.3.4 Type A3 child restraints
4.3.5 Type B child restraints
4.3.6 Type D child restraints
4.3.7 Type E child restraints
4.3.8 Type F child restraints
4.4 DYNAMIC PERFORMANCE OF UPPER ANCHORAGE COMPONENTS
4.5 DYNAMIC PERFORMANCE OF UPPER ANCHORAGE EXTENSION STRAPS
SECTION 5 TESTING
5.1 RECLINING CHILD RESTRAINTS
5.2 TEST DUMMIES
5.2.1 General
5.2.2 Test dummies for dynamic testing
5.2.3 Test dummies for determining the force required to operate adjusters in accordance with Clause 3.8(c)
5.3 CALIBRATION OF TNO TEST DUMMIES
5.4 CHILD RESTRAINT TEST SPECIMEN
5.5 REMOVABLE ITEMS
SECTION 6 INFORMATIVE LABELLING, INSTRUCTIONS, MARKING AND PACKAGING
6.1 GENERAL LABELLING REQUIREMENTS
6.1.1 Scope of section
6.1.2 Language
6.1.3 Print size
6.1.4 Illustrations
6.1.5 Durability of marking
6.1.6 Adhesion of labels
6.1.7 Use of product name
6.1.8 Standard warning format
6.2 GENERAL PACKAGING REQUIREMENTS
6.2.1 Product protection
6.2.2 Consumer protection
6.2.3 Flexible plastic packaging
6.3 INFORMATION TO BE SUPPLIED ON PACKAGING
6.4 INFORMATION TO BE SUPPLIED IN AN INSTRUCTION BOOKLET OR SHEET
6.4.1 General information
6.4.2 Instructions for installation
6.4.3 Instructions for use
6.4.4 Instructions for maintenance
6.5 INFORMATION TO BE SUPPLIED ON A SWING TICKET OR LABEL
6.6 MARKING
6.7 SHOULDER HEIGHT MARKING
6.8 MARKING ON FABRIC COVERS
APPENDIX A - CLOTHING FOR TEST DUMMIES
APPENDIX B - SPACERS FOR ATTACHMENT TO TEST DUMMIES
APPENDIX C - INSTRUCTIONS TO BE SUPPLIED FOR INSTALLATION OF THE UPPER ANCHORAGE FITTINGS
C1 FOR CARS FITTED WITH A CHILD RESTRAINT ANCHORAGE POINT
C2 FOR CARS NOT FITTED WITH A CHILD RESTRAINT ANCHORAGE POINT
C2.1 For sedans only
C2.2 For vehicles other than sedans
APPENDIX D - RECOMMENDED DUMMY TYPES
APPENDIX E - EXPLANATION OF SHOULDER DESIGNATION
E1 GENERAL
E2 INDICATIVE ANTHROPOMETRIC DATA
E3 RELATED INFORMATION
Amendments
Previous versions
AS/NZS 1754:2010
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.