AS/NZS 1594:2002
Hot-rolled steel flat products
Specifies requirements for hot-rolled steel plate, floor plate, steel and strip rolled on a continuous mill, in thicknesses up to 8 mm for formability and extra formability grades, and up to 16 mm for other grades, and for widths up to 2000 mm. It includes slit material, provided that the parent metal has an as-rolled width of not less than 600 mm.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$94.50 NZD
|
|
| HardCopy |
$105.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 1594:2002 HOT-ROLLED STEEL FLAT PRODUCTS
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 REFERENCED DOCUMENTS
1.3 DEFINITIONS
1.3.1 Ageing
1.3.2 Cast analysis
1.3.3 Edge conditions
1.3.4 Floorplate
1.3.5 Hot-rolled sheet
1.3.6 Longitudinal direction
1.3.7 Plate
1.3.8 Product analysis
1.3.9 Slit strip
1.3.10 Strip
1.3.11 Temper rolling
1.3.12 Test batch
1.3.13 Test piece
1.3.14 Test sample
1.3.15 Test specimen
1.3.16 Testing
1.3.17 Transverse direction
1.4 DESIGNATION OF GRADE
1.4.1 General
1.4.2 Analysis grades
1.4.3 Formability grades
1.4.4 Extra formability grades
1.4.5 Structural grades
1.5 ROUNDING OF TEST RESULT VALUES
1.5.1 General
1.5.2 Tensile properties
1.6 MARKING
SECTION 2 MANUFACTURING REQUIREMENTS
2.1 SCOPE
2.2 STEEL-MAKING PROCESS
2.3 CHEMICAL COMPOSITION
2.3.1 General
2.3.2 Cast analysis
2.3.3 Product analysis (for analysis grades only)
2.3.4 IIW carbon equivalent
2.4 FREEDOM FROM DEFECTS
2.5 DIMENSIONAL TOLERANCES
SECTION 3 MECHANICAL PROPERTY REQUIREMENTS
3.1 SCOPE
3.2 SELECTION OF TEST SAMPLES
3.2.1 Tensile and strain-age tensile tests
3.2.2 Bend tests
3.2.3 Sampling from coil
3.3 PREPARATION OF TEST PIECES
3.3.1 General
3.3.2 Test piece for the tensile and strain-age tensile test
3.3.3 Test piece for the bend test
3.4 TENSILE TEST
3.5 BEND TEST
3.6 STRAIN-AGE TENSILE TEST (applicable to non-ageing grades only)
APPENDIX A - PURCHASING GUIDELINES
A1 GENERAL
A2 INFORMATION TO BE SUPPLIED BY THE PURCHASER
APPENDIX B - MEANS FOR DEMONSTRATING COMPLIANCE WITH THIS STANDARD
B1 SCOPE
B2 STATISTICAL SAMPLING
B3 PRODUCT CERTIFICATION
B4 SUPPLIER'S QUALITY MANAGEMENT SYSTEM
B5 OTHER MEANS OF ASSESSMENT
B5.1 General
B5.2 Sampling
B5.3 Compliance
B5.4 Retesting
APPENDIX C - RECOMMENDED MINIMUM INTERNAL RADII OF COLD BENDS IN FORMING
APPENDIX D - METHOD FOR THE STRAIN-AGE TENSILE TEST
D1 SCOPE
D2 PRINCIPLE
D3 APPARATUS
D4 PROCEDURE
D5 TEST REPORT
Previous versions
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
Related Information
HSNOCOP 6 Flammable Liquids Tank Wagons - Revoked
Ministry: Environmental Protection Authority
Section: 1.6 References
Citation context:AS/NZS 1594:2002 Hot-rolled steel flat products
HSNOCOP 6 Flammable Liquids Tank Wagons - Revoked
Ministry: Environmental Protection Authority
Section: 3.2.2
Citation context:Steel – Steel shall be of a quality suitable for the conditions in which it is being used and comply with the requirements of the following Australian Standards (or equivalent), as appropriate:... ...AS/NZS1594: 2002 – Hot-rolled steel flat products...
Building Code Compliance Document B1
Ministry: Ministry of Business, Innovation, and Employment - Building Systems Performance (BSP)
Section: VM1
Citation context:Approved code of practice for flammable liquids road tank wagons
Ministry: WorkSafe New Zealand
Section: 1.8 References
Citation context:AS/NZS 1594:2002 Hot-rolled steel flat products
Approved code of practice for flammable liquids road tank wagons
Ministry: WorkSafe New Zealand
Section: 3.1
Citation context:Steel is of a quality suitable for the conditions of use and complies with the requirements of the following Standards (or equivalent), as appropriate:... ...AS/NZS 1594: 2002 Hot-rolled steel flat products...
Similar Standards
-
AS/NZS 1365:1996
Tolerances for flat-rolled steel products
-
AS/NZS 1365:1996A1
Tolerances for flat-rolled steel products: Amendment 1 -
AS/NZS 1595:1998
Cold-rolled, unalloyed, steel sheet and strip
-
AS/NZS 1595:1998 A1
Cold-rolled, unalloyed, steel sheet and strip: Amendment 1
AS/NZS 1594:2002 HOT-ROLLED STEEL FLAT PRODUCTS
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 REFERENCED DOCUMENTS
1.3 DEFINITIONS
1.3.1 Ageing
1.3.2 Cast analysis
1.3.3 Edge conditions
1.3.4 Floorplate
1.3.5 Hot-rolled sheet
1.3.6 Longitudinal direction
1.3.7 Plate
1.3.8 Product analysis
1.3.9 Slit strip
1.3.10 Strip
1.3.11 Temper rolling
1.3.12 Test batch
1.3.13 Test piece
1.3.14 Test sample
1.3.15 Test specimen
1.3.16 Testing
1.3.17 Transverse direction
1.4 DESIGNATION OF GRADE
1.4.1 General
1.4.2 Analysis grades
1.4.3 Formability grades
1.4.4 Extra formability grades
1.4.5 Structural grades
1.5 ROUNDING OF TEST RESULT VALUES
1.5.1 General
1.5.2 Tensile properties
1.6 MARKING
SECTION 2 MANUFACTURING REQUIREMENTS
2.1 SCOPE
2.2 STEEL-MAKING PROCESS
2.3 CHEMICAL COMPOSITION
2.3.1 General
2.3.2 Cast analysis
2.3.3 Product analysis (for analysis grades only)
2.3.4 IIW carbon equivalent
2.4 FREEDOM FROM DEFECTS
2.5 DIMENSIONAL TOLERANCES
SECTION 3 MECHANICAL PROPERTY REQUIREMENTS
3.1 SCOPE
3.2 SELECTION OF TEST SAMPLES
3.2.1 Tensile and strain-age tensile tests
3.2.2 Bend tests
3.2.3 Sampling from coil
3.3 PREPARATION OF TEST PIECES
3.3.1 General
3.3.2 Test piece for the tensile and strain-age tensile test
3.3.3 Test piece for the bend test
3.4 TENSILE TEST
3.5 BEND TEST
3.6 STRAIN-AGE TENSILE TEST (applicable to non-ageing grades only)
APPENDIX A - PURCHASING GUIDELINES
A1 GENERAL
A2 INFORMATION TO BE SUPPLIED BY THE PURCHASER
APPENDIX B - MEANS FOR DEMONSTRATING COMPLIANCE WITH THIS STANDARD
B1 SCOPE
B2 STATISTICAL SAMPLING
B3 PRODUCT CERTIFICATION
B4 SUPPLIER'S QUALITY MANAGEMENT SYSTEM
B5 OTHER MEANS OF ASSESSMENT
B5.1 General
B5.2 Sampling
B5.3 Compliance
B5.4 Retesting
APPENDIX C - RECOMMENDED MINIMUM INTERNAL RADII OF COLD BENDS IN FORMING
APPENDIX D - METHOD FOR THE STRAIN-AGE TENSILE TEST
D1 SCOPE
D2 PRINCIPLE
D3 APPARATUS
D4 PROCEDURE
D5 TEST REPORT
Previous versions
AS/NZS 1594:2002
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.