AS/NZS 1562.2:1999
Design and installation of sheet roof and wall cladding - Corrugated fibre-reinforced cement
Sets out requirements for the materials, design and installation of corrugated fibre-reinforced cement roof and wall cladding. It also provides test procedures for the determination of resistance to wind force. An appendix gives advice on the provision of roof ventilation.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$77.40 NZD
|
|
| HardCopy |
$86.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 1562.2:1999 DESIGN AND INSTALLATION OF SHEET ROOF AND WALL CLADDING - CORRUGATED FIBRE-REINFORCED CEMENT
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 APPLICATION
1.3 REFERENCED DOCUMENTS
1.4 DEFINITIONS
1.4.1 Accessories
1.4.2 Loaded panel
1.4.3 Span
1.5 RESISTANCE TO WIND FORCES
SECTION 2 MATERIALS
2.1 FIBRE-REINFORCED CEMENT SHEETING
2.2 OTHER MATERIALS
2.3 FASTENINGS
2.4 SEALANTS AND WASHERS
2.4.1 General
2.4.2 Diamond washers
2.5 SAFETY MESH
2.5.1 Requirements
2.5.2 Deemed to comply
SECTION 3 DESIGN
3.1 GENERAL
3.2 LOADINGS
3.2.1 General
3.2.2 Construction
3.3 SUPPORTING STRUCTURE
3.4 FIXING OF STRUCTURAL MEMBERS
3.5 PURLINS AND BATTENS
3.5.1 General
3.5.2 Alignment
3.5.3 Batten joints
3.5.4 Width and depth
3.6 ROOFS
3.6.1 Roofs with end laps
3.6.2 Roofs without end laps
3.6.3 Side laps
3.7 ROOF DRAINAGE
3.8 SAFETY MESH
3.9 WALKING AND STANDING ON ROOFS
3.9.1 Walkways
3.9.2 Notices
3.10 FLASHING AND PROJECTIONS THROUGH ROOFS
3.10.1 Ventilators and roof lights
3.10.2 Projections through roofs
3.11 EAVES AND GABLE ENDS
3.12 TOP EDGES AND ABUTMENTS
3.12.1 Top edges
3.12.2 Abutments
3.13 MOVEMENT JOINTS
SECTION 4 INSTALLATION
4.1 SAFETY PRECAUTIONS
4.2 CUTTING AND DRILLING
4.3 SUPPORTS AT HIPS AND VALLEYS
4.4 POSITION AND FIXING OF THE SAFETY MESH
4.4.1 General
4.4.2 Relevant positions of longitudinal and transverse wires
4.4.3 Joints in longitudinal wires
4.4.4 Joints between adjacent lengths of mesh
4.4.5 Fixing
4.4.6 Corrosive atmospheres
4.5 LAYING THE SHEETING
4.6 FIXING THE SHEETS
4.6.1 General
4.6.2 Fixing to timber purlins
4.6.3 Fixing to steel purlins or girts
4.6.4 Sealing
4.6.5 Number of fastenings
4.7 FIXING FIBRE-REINFORCED CEMENT ACCESSORIES
APPENDIX A - GUIDANCE NOTES ON ROOF VENTILATION
A1 CONDENSATION
A2 VAPOUR BARRIERS
APPENDIX B - REFERENCED DOCUMENTS
APPENDIX C - TEST FOR THE DETERMINATION OF RESISTANCE TO WIND FORCES
C1 SCOPE
C2 PRINCIPLE
C3 APPARATUS
C3.1 General
C3.2 Strengthening of the supporting structure
C3.3 Loading system
C3.4 Deflection measurement device
C4 TEST SPECIMEN
C4.1 General
C4.2 Width of the specimen
C5 PROCEDURE
C5.1 General
C5.2 Working load test
C5.3 Ultimate load test
C6 REPORT
APPENDIX D - SAFETY MESH-LOAD TEST
D1 SCOPE
D2 PRINCIPLE
D3 APPARATUS
D3.1 Test frame
D3.2 Test loads
D4 TEST SPECIMEN
D5 PROCEDURE
D6 REPORT
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
Related Information
Similar Standards
-
AS/NZS 1562.3:1996
Design and installation of sheet roof and wall cladding - Plastic
-
AS/NZS 2179.1:2014
Specifications for rainwater goods, accessories and fasteners - Part 1: Metal shape or sheet rainwater goods, and metal accessories and fasteners -
AS/NZS 2350.0:1999
Methods of testing portland and blended cements - General introduction and list of methods
-
AS/NZS 2350.1:2006
Methods of testing portland and blended cements - Method 1: Sampling
AS/NZS 1562.2:1999 DESIGN AND INSTALLATION OF SHEET ROOF AND WALL CLADDING - CORRUGATED FIBRE-REINFORCED CEMENT
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 APPLICATION
1.3 REFERENCED DOCUMENTS
1.4 DEFINITIONS
1.4.1 Accessories
1.4.2 Loaded panel
1.4.3 Span
1.5 RESISTANCE TO WIND FORCES
SECTION 2 MATERIALS
2.1 FIBRE-REINFORCED CEMENT SHEETING
2.2 OTHER MATERIALS
2.3 FASTENINGS
2.4 SEALANTS AND WASHERS
2.4.1 General
2.4.2 Diamond washers
2.5 SAFETY MESH
2.5.1 Requirements
2.5.2 Deemed to comply
SECTION 3 DESIGN
3.1 GENERAL
3.2 LOADINGS
3.2.1 General
3.2.2 Construction
3.3 SUPPORTING STRUCTURE
3.4 FIXING OF STRUCTURAL MEMBERS
3.5 PURLINS AND BATTENS
3.5.1 General
3.5.2 Alignment
3.5.3 Batten joints
3.5.4 Width and depth
3.6 ROOFS
3.6.1 Roofs with end laps
3.6.2 Roofs without end laps
3.6.3 Side laps
3.7 ROOF DRAINAGE
3.8 SAFETY MESH
3.9 WALKING AND STANDING ON ROOFS
3.9.1 Walkways
3.9.2 Notices
3.10 FLASHING AND PROJECTIONS THROUGH ROOFS
3.10.1 Ventilators and roof lights
3.10.2 Projections through roofs
3.11 EAVES AND GABLE ENDS
3.12 TOP EDGES AND ABUTMENTS
3.12.1 Top edges
3.12.2 Abutments
3.13 MOVEMENT JOINTS
SECTION 4 INSTALLATION
4.1 SAFETY PRECAUTIONS
4.2 CUTTING AND DRILLING
4.3 SUPPORTS AT HIPS AND VALLEYS
4.4 POSITION AND FIXING OF THE SAFETY MESH
4.4.1 General
4.4.2 Relevant positions of longitudinal and transverse wires
4.4.3 Joints in longitudinal wires
4.4.4 Joints between adjacent lengths of mesh
4.4.5 Fixing
4.4.6 Corrosive atmospheres
4.5 LAYING THE SHEETING
4.6 FIXING THE SHEETS
4.6.1 General
4.6.2 Fixing to timber purlins
4.6.3 Fixing to steel purlins or girts
4.6.4 Sealing
4.6.5 Number of fastenings
4.7 FIXING FIBRE-REINFORCED CEMENT ACCESSORIES
APPENDIX A - GUIDANCE NOTES ON ROOF VENTILATION
A1 CONDENSATION
A2 VAPOUR BARRIERS
APPENDIX B - REFERENCED DOCUMENTS
APPENDIX C - TEST FOR THE DETERMINATION OF RESISTANCE TO WIND FORCES
C1 SCOPE
C2 PRINCIPLE
C3 APPARATUS
C3.1 General
C3.2 Strengthening of the supporting structure
C3.3 Loading system
C3.4 Deflection measurement device
C4 TEST SPECIMEN
C4.1 General
C4.2 Width of the specimen
C5 PROCEDURE
C5.1 General
C5.2 Working load test
C5.3 Ultimate load test
C6 REPORT
APPENDIX D - SAFETY MESH-LOAD TEST
D1 SCOPE
D2 PRINCIPLE
D3 APPARATUS
D3.1 Test frame
D3.2 Test loads
D4 TEST SPECIMEN
D5 PROCEDURE
D6 REPORT
AS/NZS 1562.2:1999
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.