AS/NZS 1418.10:2011 A1
Cranes, hoists and winches - Part 10: Mobile elevating work platforms: Amendment 1:2017
This Amendment applies to Clauses 1.1, 1.2, 1.3.4, 1.3.22, 1.3.23, 1.3.26, 1.3.29, 1.3.30, 1.3.43, 2.1.4.1.2, 2.1.5.1, 2.1.5.3, 2.1.5.5, 2.1.6.3.3, 2.2.2, 2.2.7.1, 2.2.7.2, 2.2.10, 2.2.12, 2.2.18, 2.3.1.2, 2.3.1.4, 2.4.1.5, 2.5.1, 2.5.2, 2.5.5, 2.5.6, 2.5.10, 2.5.14, 2.6.4, 2.6.5, 2.6.6, 2.8.10, 3.2, 3.3, 3.4, 3.6.3.1.1, 3.6.3.1.2, 3.6.3.2.2(c), 3.6.4, 4.1.2, 4.1.3, 4.2.6, 5.1, 5.2.6, 5.2.10.1, 5.2.12, 6.2.5.2, 7.1, 7.3.3, 7.9.11.2, Tables 2.1.5.5, 2.10, 7.9, 7.9.16.2 and M4(A), Figures 2.1.5 and 7.9.17, and Appendices A, H and M.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$0.00 NZD
|
|
| HardCopy |
$51.00 NZD
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription pricing The cost of your subscription will depend on which standards you want to access, and how many people in your organisation need to be able to access the Online Library subscription at the same time (concurrent users). During your subscription period, we are also able to make any necessary changes and ensure you are aware of any pricing changes that result. For a quote, contact our Online Library team by emailing onlinelibrary@standards.govt.nz. |
Related Information
Best Practice Guidelines for Mobile Elevating Work Platforms
Ministry: WorkSafe New Zealand
Section: 2.4
Citation context:MEWPs that comply with AS/NZS 1418.10 will have the safety features listed below....
Best Practice Guidelines: Safe Use of Elevating Work Platforms in the Horticultural Industry
Ministry: WorkSafe New Zealand
Section: 2.2.1
Citation context:For more detailed information, refer to AS/NZS 1418.10.
Best Practice Guidelines: Safe Use of Elevating Work Platforms in the Horticultural Industry
Ministry: WorkSafe New Zealand
Section: 1. Scope
Citation context:The H/MEWPs to which these guidelines apply are: machines which in the terms of AS/NZS 1418.10 sections 1.3.24 and 1.3.25 are classified as Group B/Type 3... Therefore, these best practice guidelines have been developed to assist the safe operation of purpose-built H/MEWPs in conformance with... ...AS/NZS 1418.10 standards while they are being used in the horticultural work environment in New Zealand.
Best Practice Guidelines: Safe Use of Elevating Work Platforms in the Horticultural Industry
Ministry: WorkSafe New Zealand
Section: 2.9
Citation context:Any H/MEWP built to the standard AS/NZS 1418.10 section 2.1.4.2.1 has a minimum design allowance for a wind speed of 12.5m/sec – 45kph.
Best Practice Guidelines: Safe Use of Elevating Work Platforms in the Horticultural Industry
Ministry: WorkSafe New Zealand
Section: 4.2
Citation context:All newly manufactured H/MEWPs must meet the requirements of AS/NZS 1418.10 or these best practice guidelines.
Best Practice Guidelines: Safe Use of Elevating Work Platforms in the Horticultural Industry
Ministry: WorkSafe New Zealand
Section: APPENDIX F: PUBLICATIONS
Citation context:AS/NZS 1418.10 - Cranes, hoists and winches - Part 10: Mobile elevating work platforms. Specifies the requirements for the design and features of mobile elevating work platforms.
Best Practice Guidelines: Safe Use of Elevating Work Platforms in the Horticultural Industry
Ministry: WorkSafe New Zealand
Section: 2.7
Citation context:For more information on the inclinometer, refer to AS/NZS 1418.10 section 5.2.3.
Best Practice Guidelines: Safe Use of Elevating Work Platforms in the Horticultural Industry
Ministry: WorkSafe New Zealand
Section: 4.1
Citation context:Manufacturers, importers and sellers must ensure that the H/MEWP is designed in accordance with AS/NZS 1418.10 section 5,... ...is fully tested as required in AS/NZS 1418.10... ...for further details refer to AS/NZS1418.10 section 4.1.2 and 4.1.3
Best Practice Guidelines for Mobile Elevating Work Platforms
Ministry: WorkSafe New Zealand
Section: 4.1
Citation context:The design, manufacture, testing and stability testing of new or used machines first entering service in New Zealand, must meet AS/NZS 1418.10 Cranes, Hoists and Winches – Mobile Elevating Work Platforms. To meet AS/NZS 1418.10, the owner must register any used machines with the manufacturer (or their New Zealand representative), when selling or importing the machine. This ensures the new owner gets all service and safety bulletins. MEWPs already in service in New Zealand must meet the requirements of one or more of the following Standards: AS/NZS 1418.10...
Best Practice Guidelines for Mobile Elevating Work Platforms
Ministry: WorkSafe New Zealand
Section: 4.2
Citation context:COMPLIANCE OF IMPORTED SECOND-HAND MACHINES: The importer that is also a supplier must make sure any second-hand MEWP meets the requirements of AS/NZS 1418.10 and Section 4.2 of these guidelines.
Best Practice Guidelines for Mobile Elevating Work Platforms
Ministry: WorkSafe New Zealand
Section: 5.0
Citation context:People maintaining MEWPs and the competent person must have access to the current versions of the following standards, AS 2550.10 and AS/NZS 1418.10.
Best Practice Guidelines for Mobile Elevating Work Platforms
Ministry: WorkSafe New Zealand
Section: 4.3
Citation context:MACHINE CONTROLS: Detailed requirements for control systems are found in AS/NZS 1418.10: Cranes, Hoists and Winches – Part 10: Mobile Elevating Work Platforms... ...Every control position must have a red emergency-stop control, in line with AS/NZS 1418.10.
Best Practice Guidelines for Mobile Elevating Work Platforms
Ministry: WorkSafe New Zealand
Section: 4.4
Citation context:SAFETY FEATURES: This section covers the minimum requirements for safety features outlined in AS/NZS 1418.10: Cranes, Hoists and Winches – Part 10: Mobile Elevating Work Platforms.
Best Practice Guidelines for Mobile Elevating Work Platforms
Ministry: WorkSafe New Zealand
Section: 5.5
Citation context:ELECTRICAL INSULATION TESTING:... ...Complete these tests as specified in... ...AS/NZS 1418.10 Cranes, Hoists and Winches – Part 10: Mobile Elevating Work Platforms and their referenced standards. Section 7.1 of AS/NZS 1418.10 gives the testing standards used in New Zealand.
Best Practice Guidelines: Safe Use of Elevating Work Platforms in the Horticultural Industry
Ministry: WorkSafe New Zealand
Section: APPENDIX C: ORCHARD PLATFORMS
Citation context:Background: Orchard platforms are a new family of the H/MEWP developed for pruning and harvesting the new dwarf trees which some orchards are developing. These machines were not considered when the AS/NZS 1418.10 or the AS 2550.10 were published... ...Work platform design: The minimum work platform rail height is lowered to 800mm to enable workers of smaller stature to work conveniently with a picking bag over the rail as outlined in AS/NZS1418.10 section I2.2.
Best Practice Guidelines: Safe Use of Elevating Work Platforms in the Horticultural Industry
Ministry: WorkSafe New Zealand
Section: Introduction
Citation context:These updated guidelines... ...summarise the relevant part of the industry standards... ...AS/NZS 1418.10: Cranes, Hoists and Winches – Part 10: Mobile Elevating Work Platforms. AS/NZS 1418.10 recognises that using H/MEWPs in horticulture may require some variations to the conventional mobile elevating work platform (MEWPs) requirements and specifications... ...The variations to the above standards are: inclinometer as referenced in of AS/NZS 1418.10 section 5.2.3; self-propelled platforms as referenced in AS/NZS 1418.10 section 5; and...
Best Practice Guidelines for Mobile Elevating Work Platforms
Ministry: WorkSafe New Zealand
Section: 7.10
Citation context:PUBLICATIONS AND REFERENCE MATERIAL: Cranes, Hoists and Winches – Part 10: Mobile Elevating Work Platforms, AS/NZS 1418.10
Similar Standards
-
AS/NZS 1418.10:2011
Cranes, hoists and winches - Part 10: Mobile elevating work platforms -
AS/NZS 2550.9:1996
Cranes - Safe use - Vehicle hoists
-
BS 3037-1:1958
Specification for tyres for crane rail wheels, Double-flanged parallel-tread tyres
-
BS 3037-2:1975
Specification for tyres for crane rail wheels, Forged or rolled steel double flanged rail wheels and tyres (metric units)
AS/NZS 1418.10:2011 A1
Online Library subscription pricing
The cost of your subscription will depend on which standards you want to access, and how many people in your organisation need to be able to access the Online Library subscription at the same time (concurrent users). During your subscription period, we are also able to make any necessary changes and ensure you are aware of any pricing changes that result. For a quote, contact our Online Library team by emailing onlinelibrary@standards.govt.nz.