ISO 8336:2017
Fibre-cement flat sheets — Product specification and test methods
ISO 8336:2017 specifies methods for the inspection and testing of fibre-cement flat sheets and provides the acceptance conditions for their use in one or more of the following applications:
- external wall and ceiling finishes;
- internal wall and ceiling finishes;
- internal and external backing sheets.
Products covered by this document can be used for other purposes, provided they comply with the appropriate national or international application code or standard.
NOTE 1 ISO 8336:2017 does not apply to sheets for fire protection purposes.
NOTE 2 ISO 8336:2017 does not include calculations for installation design requirements, wind uplift or water proofing of the installed sheets.
NOTE 3 ISO 8336:2017 does not apply to the following products:
- boards of Portland or equivalent cement reinforced with fibrous wood particles;
- fibre-reinforced boards of calcium silicate or cement for thermal insulation or fire protection;
- sheets containing asbestos fibre reinforcement;
- sheets containing steel fibre reinforcement;
- fibre-cement roofing slates.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$343.00 NZD
|
|
| HardCopy |
$389.00 NZD
|
|
| Networkable PDF |
Price varies
|
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Requirements
5.1 General
5.2 Sheet classifications
5.2.1 Category A
5.2.2 Category B
5.2.3 Category C
5.3 Composition and manufacture
5.3.1 General
5.3.2 Reinforcement fibre
5.3.3 Cement
5.3.4 Manufacture
5.4 Appearance and finish
5.5 Dimensions and tolerances
5.5.1 Nominal length and width
5.5.2 Thickness
5.5.3 Tolerances on nominal dimensions and shape
5.6 Physical requirements and characteristics
5.6.1 General
5.6.2 Modulus of rupture
5.6.3 Apparent density
5.6.4 Moisture movement
5.6.5 Water permeability
5.6.6 Water vapour transmission
5.6.7 Thermal conductivity
5.6.8 Freeze-thaw performance
5.6.9 Heat-rain performance
5.6.10 Warm water performance
5.6.11 Soak-dry performance
5.6.12 Resistance to mould growth
5.6.13 Resistance to nail head pull-through
5.6.14 Saturated shear bond performance
5.6.15 Surface burning characteristics
5.7 Fire properties
5.8 Product performance
6 Evaluation of conformity
6.1 General
6.2 Type testing
6.2.1 General
6.2.2 Initial type testing
6.2.3 Further type testing
6.3 Quality control system
6.3.1 General
6.3.2 Acceptance tests
6.3.3 Equipment
6.3.4 Raw materials and components
6.3.5 Product testing and evaluation
6.3.6 Non-conforming products
6.4 Inspection of a consignment of finished products
7 Test requirements
7.1 General
7.2 Dimensional and geometrical tests
7.2.1 General
7.2.2 Number of measurements
7.3 Physical performance tests
7.3.1 Modulus of rupture
7.3.2 Apparent density
7.3.3 Moisture movement test
7.3.4 Water permeability
7.3.5 Freeze-thaw test
7.3.6 Heat-rain test
7.3.7 Warm water test
7.3.8 Soak-dry test
7.3.9 Mould testing
7.3.10 Nail head pull-through
7.3.11 Saturated shear bond test
8 Marking
Annex A (normative) Consignment and inspection sampling
Annex B (normative) Statistical method for determining the corresponding wet values or revised dry specifications for the MOR when making the dry method of test or when tested prior to coating for quality control purposes
Annex C (normative) Dimensional measurement and geometrical testing procedure
Annex D (normative) Test method for the determination of fibre-cement sheet modulus of rupture (bending strength)
Annex E (normative) Test method for the determination of the apparent density of fibre-cement sheets
Annex F (normative) Test method for the determination of moisture movement characteristic of fibre-cement sheets
Annex G (normative) Test method for the determination of water permeability of fibre-cement sheets
Annex H (normative) Test method for the evaluation of freeze-thaw performance of fibre-cement sheets
Annex I (normative) Test method for the evaluation of heat-rain performance of fibre-cement sheets
Annex J (normative) Test method for warm water evaluation of fibre-cement sheets
Annex K (normative) Test method for soak-dry evaluation test of fibre-cement sheets
Bibliography
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 2908.1:2000
Cellulose-cement products - Corrugated sheets
-
AS/NZS 2908.2:2000
Cellulose-cement products – Part 2: Flat sheets
-
BS 8615-1:2019
Specification for pozzolanic materials for use with Portland cement, Natural pozzolana and natural calcined pozzolana
-
BS 8615-2:2019
Specification for pozzolanic materials for use with Portland cement, High reactivity natural calcined pozzolana
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Requirements
5.1 General
5.2 Sheet classifications
5.2.1 Category A
5.2.2 Category B
5.2.3 Category C
5.3 Composition and manufacture
5.3.1 General
5.3.2 Reinforcement fibre
5.3.3 Cement
5.3.4 Manufacture
5.4 Appearance and finish
5.5 Dimensions and tolerances
5.5.1 Nominal length and width
5.5.2 Thickness
5.5.3 Tolerances on nominal dimensions and shape
5.6 Physical requirements and characteristics
5.6.1 General
5.6.2 Modulus of rupture
5.6.3 Apparent density
5.6.4 Moisture movement
5.6.5 Water permeability
5.6.6 Water vapour transmission
5.6.7 Thermal conductivity
5.6.8 Freeze-thaw performance
5.6.9 Heat-rain performance
5.6.10 Warm water performance
5.6.11 Soak-dry performance
5.6.12 Resistance to mould growth
5.6.13 Resistance to nail head pull-through
5.6.14 Saturated shear bond performance
5.6.15 Surface burning characteristics
5.7 Fire properties
5.8 Product performance
6 Evaluation of conformity
6.1 General
6.2 Type testing
6.2.1 General
6.2.2 Initial type testing
6.2.3 Further type testing
6.3 Quality control system
6.3.1 General
6.3.2 Acceptance tests
6.3.3 Equipment
6.3.4 Raw materials and components
6.3.5 Product testing and evaluation
6.3.6 Non-conforming products
6.4 Inspection of a consignment of finished products
7 Test requirements
7.1 General
7.2 Dimensional and geometrical tests
7.2.1 General
7.2.2 Number of measurements
7.3 Physical performance tests
7.3.1 Modulus of rupture
7.3.2 Apparent density
7.3.3 Moisture movement test
7.3.4 Water permeability
7.3.5 Freeze-thaw test
7.3.6 Heat-rain test
7.3.7 Warm water test
7.3.8 Soak-dry test
7.3.9 Mould testing
7.3.10 Nail head pull-through
7.3.11 Saturated shear bond test
8 Marking
Annex A (normative) Consignment and inspection sampling
Annex B (normative) Statistical method for determining the corresponding wet values or revised dry specifications for the MOR when making the dry method of test or when tested prior to coating for quality control purposes
Annex C (normative) Dimensional measurement and geometrical testing procedure
Annex D (normative) Test method for the determination of fibre-cement sheet modulus of rupture (bending strength)
Annex E (normative) Test method for the determination of the apparent density of fibre-cement sheets
Annex F (normative) Test method for the determination of moisture movement characteristic of fibre-cement sheets
Annex G (normative) Test method for the determination of water permeability of fibre-cement sheets
Annex H (normative) Test method for the evaluation of freeze-thaw performance of fibre-cement sheets
Annex I (normative) Test method for the evaluation of heat-rain performance of fibre-cement sheets
Annex J (normative) Test method for warm water evaluation of fibre-cement sheets
Annex K (normative) Test method for soak-dry evaluation test of fibre-cement sheets
Bibliography