AS/NZS 60079.14:2009
Explosive atmospheres - Electrical installations design, selection and erection
Contains the specific requirements for the design, selection and erection of electrical installations in hazardous areas associated with explosive atmospheres. Where the equipment is required to meet other environmental conditions, for example, protection against ingress of water and resistance to corrosion, additional methods of protection may be necessary. The method used shall not adversely affect the integrity of the enclosure. Adopted with national modifcations from IEC 60079-14, Ed. 4.0(2007).
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$283.48 NZD
|
|
| HardCopy |
$333.91 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
References
The control of undesirable static electricity
Lightning protection
Electric cables - Reeling and trailing - For underground coal mining
Safety in laboratories - Fume cupboards
Electrical equipment for explosive atmospheres - Repair and overhaul
Electrical equipment for mines and quarries - General requirements
Related Information
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand - Energy Safety
Section: 60(2)
Citation context:Refers to 60079.14:2009(AS/NZS)A1. A person who installs any of the following must ensure that the installation complies with Part 2 of AS/NZS 3000 and also with the standard indicated:... ...(b) an installation in a hazardous area: AS/NZS 60079.14:...
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand - Energy Safety
Section: 60(2)
Citation context:A person who installs any of the following must ensure that the installation complies with Part 2 of AS/NZS 3000 and also with the standard indicated:... ...(b) an installation in a hazardous area: AS/NZS 60079.14:...
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand - Energy Safety
Section: Schedule 2
Citation context:AS/NZS 60079.14 (means) AS/NZS 60079.14:2009: Explosive atmospheres - Electrical installations design, selection and erection: including Amendment 1
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand - Energy Safety
Section: Schedule 2
Citation context:Refers to 60079.14:2009(AS/NZS)A1. AS/NZS 60079.14 (means) AS/NZS 60079.14:2009: Explosive atmospheres - Electrical installations design, selection and erection: including Amendment 1
Health and Safety at Work (Hazardous Substances) Regulations 2017
Ministry: WorkSafe New Zealand
Section: 10.12(2)
Citation context:The requirements of regulation 10.11(2)(a) are met if- (a) there is compliance with table 1 of AS/NZS 60079.14:2009 relating to the matters described in regulation 10.11(2)(a); or...
Health and Safety at Work (Hazardous Substances) Regulations 2017
Ministry: WorkSafe New Zealand
Section: 10.14
Citation context:(1) In the case of an electrical ignition source, compliance with one of, or where applicable a combination of, the explosion-protection techniques listed in section 5 of AS/NZS 60079.14:2009 meets the requirements of regulation 10.13(3)(b)(ii) and (4)(d)(ii). (2) The requirements of regulation 10.13(5) are met if- (a) there is compliance with section 5 of AS/NZS 60079.14:2009 relating to the matters described in regulation 10.13(5); or...
Health and Safety at Work (Hazardous Substances) Regulations 2017
Ministry: WorkSafe New Zealand
Section: 10.1
Citation context:AS/NZS 60079.14:2009 means the standard on Explosive atmospheres- Part 14: Electrical installations design, selection and erection (IEC 66079–14)
Health and Safety at Work (Hazardous Substances) Regulations 2017
Ministry: WorkSafe New Zealand
Section: 10.20
Citation context:(1) In the case of an electrical ignition source, compliance with any one of the explosion-protection techniques, or a combination of explosion-protection techniques, listed in section 5 of AS/NZS 60079.14:2009 relating to matters described in regulation 10.19(3)(b) are a means of meeting the requirements of regulation 10.19(3)(b). (2) The requirements of regulation 10.19(4) are met if- (a) there is compliance with AS/NZS 60079.14:2009 relating to the matters described in regulation 10.19(4); or...
Similar Standards
-
AS/NZS 1299:2009
Electrical equipment for mines and quarries - Explosion-protected three-phase restrained plugs and receptacles for working voltages up to and including 3.3 kV
-
AS/NZS 1299:2009 A1
Electrical equipment for mines and quarries - Explosion-protected three-phase restrained plugs and receptacles for working voltages up to and including 3.3 kV: Amendment 1:2012 -
AS/NZS 1300:2009
Electrical equipment for mines and quarries - Bolted explosion-protected three-phase cable coupling devices
-
AS/NZS 1300:2009 A1
Electrical equipment for mines and quarries - Bolted explosion-protected three-phase cable coupling devices: Amendment 1:2012
AS/NZS 60079.14:2009
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.