AS/NZS 10535:2024
Assistive products - Hoists for the transfer of persons - Requirements and test methods
Standard identically adopts and modifies ISO 10535:2021 which specifies requirements and test methods applicable to hoists for the transfer of people with disabilities.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$171.90 NZD | |
| HardCopy |
$191.00 NZD | |
| Networkable PDF |
Price varies
| |
| Online Library ( Annual subscription) | Info
Price varies
|
AS/NZS 10535:2024 Hoists for the transfer of persons - Requirements and test methods (ISO 10535:2021 (ED.3.0), MOD)
Preface
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements and test methods
4.1 General requirements
4.1.1 Risk management
4.1.2 Ergonomic factors
4.1.3 Noise and vibration
4.1.4 Safety of moving and folding parts
4.1.5 Prevention of traps for parts of the human body
4.1.6 V-shaped openings
4.2 General test methods
4.2.1 Test conditions
4.2.2 Apparatus
4.2.3 Permissible errors of test equipment
4.2.4 Test report
4.2.5 Safety and performance requirements
4.2.6 Test methods for general safety requirements
4.3 Requirements for body-support units
4.4 Central suspension point
4.4.1 Requirements for central suspension point
4.4.2 Test method for the central suspension point
4.5 Spreader bar
4.5.1 Requirements for spreader bar
4.5.2 Test methods for the spreader bar
4.6 Performance
4.6.1 Requirements for performance
4.6.2 Test methods for performance
4.7 Rate of movements of the hoist
4.7.1 Requirements for rate of lifting and lowering
4.7.2 Test methods for rate of lifting and lowering
4.7.3 Requirements for rate of powered horizontal movement
4.7.4 Test methods for rate of powered horizontal movement
4.8 Operating forces/torques
4.8.1 Requirements for operating forces/torques
4.8.2 Test methods for operating forces/torques
4.9 Durability
4.9.1 Requirements for durability
4.9.2 Test methods for durability
4.10 Hydraulic components
4.10.1 Requirements for hydraulic components
4.10.2 Test methods for hydraulic components
4.11 Pneumatic components
4.11.1 Requirements for pneumatic components
4.11.2 Test methods for pneumatic components
4.12 Machine washable hoists
4.12.1 Requirements for machine washable hoists
4.12.2 Test methods for machine washable hoists
4.13 Requirement for information supplied by the manufacturer
4.13.1 General
4.13.2 Instructions for use
4.13.3 Labelling
5 Mobile hoists — Specific requirements and test methods
5.1 General requirements
5.2 Static strength
5.2.1 Requirements for static strength
5.2.2 Test methods for static strength
5.3 Static stability
5.3.1 Requirements for static stability
5.3.2 Test methods for static stability
5.4 Immobilizing device (brakes)
5.4.1 Requirements for immobilizing device (brakes)
5.4.2 Test methods for immobilizing device (brakes)
5.5 Moving forces
5.5.1 Requirements for moving forces
5.5.2 Test methods for moving forces
5.6 Requirement for information supplied by the manufacturer
5.6.1 Pre-sale information
6 Mobile hoists for transferring a person in standing position— Specific requirements and test methods
6.1 General requirements
6.2 Static strength
6.2.1 Requirements for static strength
6.2.2 Test method for static strength
6.3 Static stability
6.3.1 Requirements for static stability
6.3.2 Test methods for static stability
6.4 Immobilizing device (brakes)
6.4.1 Requirements for immobilizing device (brakes)
6.4.2 Test methods for immobilizing device (brakes)
6.5 Moving forces
6.5.1 Requirements for moving forces
6.5.2 Test methods for moving forces
6.6 Durability
6.6.1 Requirements for durability
6.6.2 Test methods for durability
6.7 Requirement for information supplied by the manufacturer
6.7.1 Pre-sale information
7 Stationary hoists — Specific requirements and test methods
7.1 General requirements
7.2 Specific safety requirements
7.2.1 Requirements for specific safety requirements
7.2.2 Test methods for specific safety requirements
7.3 Static strength (free-standing stationary hoists only)
7.3.1 Requirements for static strength (free-standing stationary hoists only)
7.3.2 Test methods for static strength (free-standing stationary hoists only)
7.4 Static stability (free-standing stationary hoists only)
7.4.1 Requirements for static stability (free-standing stationary hoists only)
7.4.2 Test methods for static stability (free-standing stationary hoists only)
7.5 Static strength for all other stationary hoists
7.5.1 Requirements for static strength for all other stationary hoists
7.5.2 Test methods for static strength for all other stationary hoists
7.6 Requirement for information supplied by the manufacturer
7.6.1 User information
8 Non-rigid body-support units — Specific requirements and test methods
8.1 General requirements
8.2 Requirements for material and seams of the non-rigid body-support unit
8.3 Test methods for non-rigid body-support unit
8.3.1 Test methods for non-rigid body-support unit designed to be laundered
8.3.2 Test method for durability for non-rigid body-support unit
8.4 Requirement for information supplied by the manufacturer
8.4.1 Pre-sale information
8.4.2 User information
8.4.3 Labelling
9 Rigid body-support units — Specific requirements and test methods
9.1 General requirements
9.2 Requirements for backrest
9.3 Requirements and test methods for durability
9.4 Requirement for information supplied by the manufacturer
9.4.1 User information
9.4.2 Labelling
10 Bathtub hoists — Specific requirements and test methods
10.1 General requirements
10.1.1 General
10.1.2 Risk analysis
10.1.3 Ergonomic factors
10.1.4 Noise
10.1.5 Safety of moving and folding parts
10.1.6 Prevention of traps for parts of the human body
10.1.7 V-shaped openings
10.2 General test methods
10.2.1 Test conditions
10.2.2 Test equipment
10.2.3 Permissible errors of test equipment
10.2.4 Test report
10.3 Safety requirements
10.3.1 General safety requirements
10.3.2 Test methods for general safety requirements
10.4 Body-support units
10.5 Spreader bar
10.6 Performance
10.7 Rate of movements of the hoist
10.8 Operating forces/torques
10.9 Durability
10.9.1 Requirements for durability
10.9.2 Test methods for durability
10.10 Static strength and stability
10.10.1 Requirements for static strength and stability
10.10.2 Test methods for static strength and stability
10.11 Hydraulic components
10.12 Pneumatic components
10.13 Specific safety requirements
10.13.1 Requirements for specific safety requirements
10.13.2 Test methods for specific safety requirements
10.14 Non-rigid body-support units
10.15 Rigid body-support units — Requirements
10.16 Requirement for information supplied by the manufacturer
10.16.1 General
10.16.2 Instructions for use
10.16.3 Labelling
Annex A (informative) Rationale for specific safety requirements
Annex B (informative) Periodic inspection and maintenance
Annex C (informative) Compatibility of hoist/spreader bar/body-support units
Annex D (informative) Guidelines for colour coding for size of non-rigid body-support units
Bibliography
Appendix ZZ (normative) Modifications to ISO 10535:2021 for Australia and New Zealand
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
- 11.180.10 Aids and adaptation for moving
Similar Standards
- AS/NZS 10542.1:2015
Technical systems and aids for people with disability - Wheelchair tiedown and occupant-restraint systems - Part 1: Requirements and test methods for all systems - AS/NZS 3695.1:2011
Wheelchairs - Part 1: Requirements and test methods for manual wheelchairs - AS/NZS 3695.2:2013
Wheelchairs - Part 2: Requirements and test methods for electrically powered wheelchairs (including mobility scooters) - AS/NZS 3695.2:2013 Ruling 1
Wheelchairs - Part 2: Requirements and test methods for electrically powered wheelchairs (including mobility scooters)(Ruling 1 to AS/NZS 3695.2)
AS/NZS 10535:2024 Hoists for the transfer of persons - Requirements and test methods (ISO 10535:2021 (ED.3.0), MOD)
Preface
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements and test methods
4.1 General requirements
4.1.1 Risk management
4.1.2 Ergonomic factors
4.1.3 Noise and vibration
4.1.4 Safety of moving and folding parts
4.1.5 Prevention of traps for parts of the human body
4.1.6 V-shaped openings
4.2 General test methods
4.2.1 Test conditions
4.2.2 Apparatus
4.2.3 Permissible errors of test equipment
4.2.4 Test report
4.2.5 Safety and performance requirements
4.2.6 Test methods for general safety requirements
4.3 Requirements for body-support units
4.4 Central suspension point
4.4.1 Requirements for central suspension point
4.4.2 Test method for the central suspension point
4.5 Spreader bar
4.5.1 Requirements for spreader bar
4.5.2 Test methods for the spreader bar
4.6 Performance
4.6.1 Requirements for performance
4.6.2 Test methods for performance
4.7 Rate of movements of the hoist
4.7.1 Requirements for rate of lifting and lowering
4.7.2 Test methods for rate of lifting and lowering
4.7.3 Requirements for rate of powered horizontal movement
4.7.4 Test methods for rate of powered horizontal movement
4.8 Operating forces/torques
4.8.1 Requirements for operating forces/torques
4.8.2 Test methods for operating forces/torques
4.9 Durability
4.9.1 Requirements for durability
4.9.2 Test methods for durability
4.10 Hydraulic components
4.10.1 Requirements for hydraulic components
4.10.2 Test methods for hydraulic components
4.11 Pneumatic components
4.11.1 Requirements for pneumatic components
4.11.2 Test methods for pneumatic components
4.12 Machine washable hoists
4.12.1 Requirements for machine washable hoists
4.12.2 Test methods for machine washable hoists
4.13 Requirement for information supplied by the manufacturer
4.13.1 General
4.13.2 Instructions for use
4.13.3 Labelling
5 Mobile hoists — Specific requirements and test methods
5.1 General requirements
5.2 Static strength
5.2.1 Requirements for static strength
5.2.2 Test methods for static strength
5.3 Static stability
5.3.1 Requirements for static stability
5.3.2 Test methods for static stability
5.4 Immobilizing device (brakes)
5.4.1 Requirements for immobilizing device (brakes)
5.4.2 Test methods for immobilizing device (brakes)
5.5 Moving forces
5.5.1 Requirements for moving forces
5.5.2 Test methods for moving forces
5.6 Requirement for information supplied by the manufacturer
5.6.1 Pre-sale information
6 Mobile hoists for transferring a person in standing position— Specific requirements and test methods
6.1 General requirements
6.2 Static strength
6.2.1 Requirements for static strength
6.2.2 Test method for static strength
6.3 Static stability
6.3.1 Requirements for static stability
6.3.2 Test methods for static stability
6.4 Immobilizing device (brakes)
6.4.1 Requirements for immobilizing device (brakes)
6.4.2 Test methods for immobilizing device (brakes)
6.5 Moving forces
6.5.1 Requirements for moving forces
6.5.2 Test methods for moving forces
6.6 Durability
6.6.1 Requirements for durability
6.6.2 Test methods for durability
6.7 Requirement for information supplied by the manufacturer
6.7.1 Pre-sale information
7 Stationary hoists — Specific requirements and test methods
7.1 General requirements
7.2 Specific safety requirements
7.2.1 Requirements for specific safety requirements
7.2.2 Test methods for specific safety requirements
7.3 Static strength (free-standing stationary hoists only)
7.3.1 Requirements for static strength (free-standing stationary hoists only)
7.3.2 Test methods for static strength (free-standing stationary hoists only)
7.4 Static stability (free-standing stationary hoists only)
7.4.1 Requirements for static stability (free-standing stationary hoists only)
7.4.2 Test methods for static stability (free-standing stationary hoists only)
7.5 Static strength for all other stationary hoists
7.5.1 Requirements for static strength for all other stationary hoists
7.5.2 Test methods for static strength for all other stationary hoists
7.6 Requirement for information supplied by the manufacturer
7.6.1 User information
8 Non-rigid body-support units — Specific requirements and test methods
8.1 General requirements
8.2 Requirements for material and seams of the non-rigid body-support unit
8.3 Test methods for non-rigid body-support unit
8.3.1 Test methods for non-rigid body-support unit designed to be laundered
8.3.2 Test method for durability for non-rigid body-support unit
8.4 Requirement for information supplied by the manufacturer
8.4.1 Pre-sale information
8.4.2 User information
8.4.3 Labelling
9 Rigid body-support units — Specific requirements and test methods
9.1 General requirements
9.2 Requirements for backrest
9.3 Requirements and test methods for durability
9.4 Requirement for information supplied by the manufacturer
9.4.1 User information
9.4.2 Labelling
10 Bathtub hoists — Specific requirements and test methods
10.1 General requirements
10.1.1 General
10.1.2 Risk analysis
10.1.3 Ergonomic factors
10.1.4 Noise
10.1.5 Safety of moving and folding parts
10.1.6 Prevention of traps for parts of the human body
10.1.7 V-shaped openings
10.2 General test methods
10.2.1 Test conditions
10.2.2 Test equipment
10.2.3 Permissible errors of test equipment
10.2.4 Test report
10.3 Safety requirements
10.3.1 General safety requirements
10.3.2 Test methods for general safety requirements
10.4 Body-support units
10.5 Spreader bar
10.6 Performance
10.7 Rate of movements of the hoist
10.8 Operating forces/torques
10.9 Durability
10.9.1 Requirements for durability
10.9.2 Test methods for durability
10.10 Static strength and stability
10.10.1 Requirements for static strength and stability
10.10.2 Test methods for static strength and stability
10.11 Hydraulic components
10.12 Pneumatic components
10.13 Specific safety requirements
10.13.1 Requirements for specific safety requirements
10.13.2 Test methods for specific safety requirements
10.14 Non-rigid body-support units
10.15 Rigid body-support units — Requirements
10.16 Requirement for information supplied by the manufacturer
10.16.1 General
10.16.2 Instructions for use
10.16.3 Labelling
Annex A (informative) Rationale for specific safety requirements
Annex B (informative) Periodic inspection and maintenance
Annex C (informative) Compatibility of hoist/spreader bar/body-support units
Annex D (informative) Guidelines for colour coding for size of non-rigid body-support units
Bibliography
Appendix ZZ (normative) Modifications to ISO 10535:2021 for Australia and New Zealand