AS/NZS 8005:2013
Accessories for child restraints for use in motor vehicles
Provides minimum requirements for the design, construction, performance and informative labelling for products sold separately as accessories for child restraints covered by AS/NZS 1754, Child restraint systems for use in motor vehicles.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$171.90 NZD
|
|
| HardCopy |
$191.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 8005:2013 ACCESSORIES FOR CHILD RESTRAINTS FOR USE IN MOTOR VEHICLES
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 APPLICATION
1.3 REFERENCED DOCUMENTS
1.4 DEFINITIONS
1.4.1 Accessories
1.4.2 Actuation surface
1.4.3 Adjuster
1.4.4 Anchorage components
1.4.5 Anchorage point
1.4.6 Attachment clip
1.4.7 Authority
1.4.8 Booster seat
1.4.9 Child restraint
1.4.10 Converter
1.4.11 Crotch strap
1.4.12 Energy absorbing properties
1.4.13 Fabric
1.4.14 Flame spread time
1.4.15 ISOFIX compatible child restraint
1.4.16 Load bearing part
1.4.17 Locking clip
1.4.18 Lower attachment connectors
1.4.19 Means of adjustment
1.4.20 Permanently attached
1.4.21 Permanently fixed
1.4.22 Permanently fixed in position
1.4.23 Play devices
1.4.24 Quick-release device
1.4.25 Rigid component and material
1.4.26 Set screw
1.4.27 Shall
1.4.28 Should
1.4.29 Strap
1.4.30 Submarining
1.4.31 Surface burning time
1.4.32 Top tether extension strap
1.4.33 Top tether strap
1.4.34 Trims
1.4.35 Upper anchor fitting
1.5 ADDITIONAL INFORMATION
SECTION 2 GENERAL MATERIALS
2.1 GENERAL
2.2 STAINING
2.3 NET
2.4 METAL PARTS OR COATED METAL PARTS
2.5 TOXICITY
2.6 BITE RESISTANCE OF FABRIC ITEMS
2.7 PLASTICS STABILIZATION
2.8 THREAD
SECTION 3 GENERAL DESIGN, CONSTRUCTION AND PERFORMANCE
3.1 GENERAL
3.2 PROTECTION AND PERFORMANCE
3.3 TESTING
3.4 WORKMANSHIP, FINISH AND HAZARDS
3.5 PLAY DEVICES
3.6 DURABILITY OF COMPONENTS
3.7 FORESEEABLE MISUSE
SECTION 4 PACKAGING, MARKING AND INSTRUCTIONS
4.1 GENERAL
4.2 GENERAL REQUIREMENTS
4.2.1 Language
4.2.2 Print size and contrast
4.2.3 Illustrations
4.2.4 Durability of marking
4.2.5 Adhesion of labels
4.2.6 Marking of accessories
4.2.7 Use of product name
4.2.8 Standard warning heading format
4.3 FLEXIBLE PACKAGING
4.4 GENERAL INFORMATION TO BE SUPPLIED ON PACKAGING
4.5 GENERAL MARKING REQUIREMENTS
4.6 GENERAL INFORMATION TO BE SUPPLIED IN AN INSTRUCTION BOOKLET OR SHEET
4.6.1 General information
4.6.2 Instructions
SECTION 5 ANCHORING AND ATTACHMENT COMPONENTS
5.1 GENERAL
5.2 COMPONENTS
5.2.1 Anchor fitting kit
5.2.2 Top tether extension straps
5.2.3 Fixed top tether extension straps
5.2.4 Set screw (anchor bolt)
5.3 REQUIREMENTS FOR THE ANCHORAGE COMPONENTS
5.3.1 Anchorage components
5.3.2 Adjusters
5.4 DYNAMIC PERFORMANCE
5.4.1 Anchorage components
5.4.2 Top tether extension strap
5.4.3 Adjusters
5.5 INFORMATION TO BE PROVIDED
5.5.1 General
5.5.2 Packaging
5.5.3 Marking
5.5.4 Instructions
SECTION 6 SEATBELT MODIFIERS
6.1 GENERAL
6.2 DESIGN AND PERFORMANCE
6.3 DYNAMIC TESTING
6.4 INFORMATION TO BE PROVIDED
6.4.1 General
6.4.2 Packaging
6.4.3 Marking
6.4.4 Instructions
SECTION 7 SEATBELT EXTENDERS
7.1 GENERAL
7.2 DESIGN AND PERFORMANCE
7.3 TESTING
7.4 INFORMATION TO BE PROVIDED
7.4.1 General
7.4.2 Packaging
7.4.3 Marking
7.4.4 Instructions
SECTION 8 COVERS AND PADDING
8.1 GENERAL
8.2 COMPONENTS, MATERIALS AND PERFORMANCE
8.2.1 Fitting to the child restraint
8.2.2 Flammability of fabrics and padding material
8.2.3 Bite resistance of fabric items
8.3 DYNAMIC TESTING
8.3.1 General requirements
8.3.2 Covers
8.3.3 Pads
8.3.4 Pads or pillows that push the head forward of the backrest or head supporting surfaces
8.4 SHOULDER HEIGHT MARKING
8.5 INFORMATION TO BE PROVIDED
8.5.1 General
8.5.2 Packaging
8.5.3 Marking
8.5.4 Instructions
SECTION 9 CROSS CHEST DEVICES
9.1 GENERAL
9.2 DESIGN AND PERFORMANCE
9.3 DYNAMIC TESTING
9.4 INFORMATION TO BE PROVIDED
9.4.1 General
9.4.2 Packaging
9.4.3 Marking
9.4.4 Instructions
SECTION 10 BUCKLE COVERS
10.1 GENERAL
10.2 DESIGN AND PERFORMANCE
10.2.1 Seatbelt buckle covers
10.2.2 Child restraint buckle covers
10.3 DYNAMIC TESTING
10.4 INFORMATION TO BE PROVIDED
10.4.1 General
10.4.2 Packaging
10.4.3 Marking
10.4.4 Instructions
SECTION 11 PLAY TRAY, PLAY DEVICES AND OTHER ADD-ON ACCESSORIES
11.1 GENERAL
11.2 DESIGN AND PERFORMANCE
11.3 DYNAMIC TESTING
11.4 INFORMATION TO BE PROVIDED
11.4.1 General
11.4.2 Packaging
11.4.3 Marking
11.4.4 Instructions
SECTION 12 FITTING ACCESSORIES
12.1 GENERAL
12.2 DESIGN AND PERFORMANCE
12.3 DYNAMIC TESTING
12.4 INFORMATION TO BE PROVIDED
12.4.1 General
12.4.2 Packaging
12.4.3 Marking
12.4.4 Instructions
APPENDIX A - SAFETY PRINCIPLES RELATED TO ACCESSORIES FOR CHILD RESTRAINTS
APPENDIX B - DYNAMIC TEST SCHEDULE
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
References
Methods of testing child restraints - Method 10: Bite test
Methods of testing child restraints - Method 12: Test for openings in fabric and netting of child restraint accessories
Methods of testing child restraints - Method 3: Dynamic testing of upper anchorage components and top tether extension straps
Methods of testing child restraints - Method 5: Determination of quick-release device and low attachment connector actuation force
Safety of toys - Part 1: Safety aspects related to mechanical and physical properties
Related Information
Similar Standards
-
AS/NZS 1753:2015
Webbing for restraining devices for occupants of motor vehicles -
AS/NZS 1754:2013
Child restraint systems for use in motor vehicles -
AS/NZS 1754:2013 A1
Child restraint systems for use in motor vehicles: Amendment 1:2016 -
AS/NZS 2596:2003
Seat belt assemblies for motor vehicles
AS/NZS 8005:2013 ACCESSORIES FOR CHILD RESTRAINTS FOR USE IN MOTOR VEHICLES
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 APPLICATION
1.3 REFERENCED DOCUMENTS
1.4 DEFINITIONS
1.4.1 Accessories
1.4.2 Actuation surface
1.4.3 Adjuster
1.4.4 Anchorage components
1.4.5 Anchorage point
1.4.6 Attachment clip
1.4.7 Authority
1.4.8 Booster seat
1.4.9 Child restraint
1.4.10 Converter
1.4.11 Crotch strap
1.4.12 Energy absorbing properties
1.4.13 Fabric
1.4.14 Flame spread time
1.4.15 ISOFIX compatible child restraint
1.4.16 Load bearing part
1.4.17 Locking clip
1.4.18 Lower attachment connectors
1.4.19 Means of adjustment
1.4.20 Permanently attached
1.4.21 Permanently fixed
1.4.22 Permanently fixed in position
1.4.23 Play devices
1.4.24 Quick-release device
1.4.25 Rigid component and material
1.4.26 Set screw
1.4.27 Shall
1.4.28 Should
1.4.29 Strap
1.4.30 Submarining
1.4.31 Surface burning time
1.4.32 Top tether extension strap
1.4.33 Top tether strap
1.4.34 Trims
1.4.35 Upper anchor fitting
1.5 ADDITIONAL INFORMATION
SECTION 2 GENERAL MATERIALS
2.1 GENERAL
2.2 STAINING
2.3 NET
2.4 METAL PARTS OR COATED METAL PARTS
2.5 TOXICITY
2.6 BITE RESISTANCE OF FABRIC ITEMS
2.7 PLASTICS STABILIZATION
2.8 THREAD
SECTION 3 GENERAL DESIGN, CONSTRUCTION AND PERFORMANCE
3.1 GENERAL
3.2 PROTECTION AND PERFORMANCE
3.3 TESTING
3.4 WORKMANSHIP, FINISH AND HAZARDS
3.5 PLAY DEVICES
3.6 DURABILITY OF COMPONENTS
3.7 FORESEEABLE MISUSE
SECTION 4 PACKAGING, MARKING AND INSTRUCTIONS
4.1 GENERAL
4.2 GENERAL REQUIREMENTS
4.2.1 Language
4.2.2 Print size and contrast
4.2.3 Illustrations
4.2.4 Durability of marking
4.2.5 Adhesion of labels
4.2.6 Marking of accessories
4.2.7 Use of product name
4.2.8 Standard warning heading format
4.3 FLEXIBLE PACKAGING
4.4 GENERAL INFORMATION TO BE SUPPLIED ON PACKAGING
4.5 GENERAL MARKING REQUIREMENTS
4.6 GENERAL INFORMATION TO BE SUPPLIED IN AN INSTRUCTION BOOKLET OR SHEET
4.6.1 General information
4.6.2 Instructions
SECTION 5 ANCHORING AND ATTACHMENT COMPONENTS
5.1 GENERAL
5.2 COMPONENTS
5.2.1 Anchor fitting kit
5.2.2 Top tether extension straps
5.2.3 Fixed top tether extension straps
5.2.4 Set screw (anchor bolt)
5.3 REQUIREMENTS FOR THE ANCHORAGE COMPONENTS
5.3.1 Anchorage components
5.3.2 Adjusters
5.4 DYNAMIC PERFORMANCE
5.4.1 Anchorage components
5.4.2 Top tether extension strap
5.4.3 Adjusters
5.5 INFORMATION TO BE PROVIDED
5.5.1 General
5.5.2 Packaging
5.5.3 Marking
5.5.4 Instructions
SECTION 6 SEATBELT MODIFIERS
6.1 GENERAL
6.2 DESIGN AND PERFORMANCE
6.3 DYNAMIC TESTING
6.4 INFORMATION TO BE PROVIDED
6.4.1 General
6.4.2 Packaging
6.4.3 Marking
6.4.4 Instructions
SECTION 7 SEATBELT EXTENDERS
7.1 GENERAL
7.2 DESIGN AND PERFORMANCE
7.3 TESTING
7.4 INFORMATION TO BE PROVIDED
7.4.1 General
7.4.2 Packaging
7.4.3 Marking
7.4.4 Instructions
SECTION 8 COVERS AND PADDING
8.1 GENERAL
8.2 COMPONENTS, MATERIALS AND PERFORMANCE
8.2.1 Fitting to the child restraint
8.2.2 Flammability of fabrics and padding material
8.2.3 Bite resistance of fabric items
8.3 DYNAMIC TESTING
8.3.1 General requirements
8.3.2 Covers
8.3.3 Pads
8.3.4 Pads or pillows that push the head forward of the backrest or head supporting surfaces
8.4 SHOULDER HEIGHT MARKING
8.5 INFORMATION TO BE PROVIDED
8.5.1 General
8.5.2 Packaging
8.5.3 Marking
8.5.4 Instructions
SECTION 9 CROSS CHEST DEVICES
9.1 GENERAL
9.2 DESIGN AND PERFORMANCE
9.3 DYNAMIC TESTING
9.4 INFORMATION TO BE PROVIDED
9.4.1 General
9.4.2 Packaging
9.4.3 Marking
9.4.4 Instructions
SECTION 10 BUCKLE COVERS
10.1 GENERAL
10.2 DESIGN AND PERFORMANCE
10.2.1 Seatbelt buckle covers
10.2.2 Child restraint buckle covers
10.3 DYNAMIC TESTING
10.4 INFORMATION TO BE PROVIDED
10.4.1 General
10.4.2 Packaging
10.4.3 Marking
10.4.4 Instructions
SECTION 11 PLAY TRAY, PLAY DEVICES AND OTHER ADD-ON ACCESSORIES
11.1 GENERAL
11.2 DESIGN AND PERFORMANCE
11.3 DYNAMIC TESTING
11.4 INFORMATION TO BE PROVIDED
11.4.1 General
11.4.2 Packaging
11.4.3 Marking
11.4.4 Instructions
SECTION 12 FITTING ACCESSORIES
12.1 GENERAL
12.2 DESIGN AND PERFORMANCE
12.3 DYNAMIC TESTING
12.4 INFORMATION TO BE PROVIDED
12.4.1 General
12.4.2 Packaging
12.4.3 Marking
12.4.4 Instructions
APPENDIX A - SAFETY PRINCIPLES RELATED TO ACCESSORIES FOR CHILD RESTRAINTS
APPENDIX B - DYNAMIC TEST SCHEDULE
AS/NZS 8005:2013
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.