AS/NZS 4755.3.2:2014
Demand response capabilities and supporting technologies for electrical products - Part 3.2: Interaction of demand response enabling devices and electrical products - Operational instructions and connections for devices controlling swimming pool pump-un
Defines the nomenclature, architecture and operational instructions for systems that can be used to remotely control electrical products, and defines the demand response capabilities of products.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$108.90 NZD
|
|
| HardCopy |
$121.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription pricing The cost of your subscription will depend on which standards you want to access, and how many people in your organisation need to be able to access the Online Library subscription at the same time (concurrent users). During your subscription period, we are also able to make any necessary changes and ensure you are aware of any pricing changes that result. For a quote, contact our Online Library team by emailing onlinelibrary@standards.govt.nz. |
AS/NZS 4755.3.2:2014 DEMAND RESPONSE CAPABILITIES AND SUPPORTING TECHNOLOGIES FOR ELECTRICAL PRODUCTS - INTERACTION OF...
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 REFERENCED DOCUMENTS
1.3 DEFINITIONS
1.3.1 Asserted
1.3.2 Automatic override
1.3.3 Circumvention device
1.3.4 Demand response (DR)
1.3.5 Demand response capability
1.3.6 Demand response enabling device (DRED)
1.3.7 Demand response event
1.3.8 Demand response interface
1.3.9 Demand response mode (DRM)
1.3.10 Electrical product
1.3.11 Extra low voltage
1.3.12 Filtration pump-unit
1.3.13 Input energy
1.3.14 Input power
1.3.15 Integral pump-unit controller
1.3.16 Manual override
1.3.17 Model
1.3.18 Normal operation
1.3.19 Operational instruction (OI)
1.3.20 Original user settings
1.3.21 Pool equipment
1.3.22 Pump-unit
1.3.23 Pump-unit controller
1.3.24 Remote agent
1.3.25 Response time
1.3.26 RJ45 connector
1.3.27 Run-time adjustment
1.3.28 Sanitization controller
1.3.29 Scheduled off-time
1.3.30 Scheduled on-time
1.3.31 Safety extra-low voltage (SELV)
1.3.32 Separate pump-unit controller
1.3.33 Shall
1.3.34 Should
1.3.35 Switch
1.3.36 User
SECTION 2 OPERATIONAL INSTRUCTIONS AND DEMAND RESPONSE MODES
2.1 GENERAL PRINCIPLES
2.2 DEMAND RESPONSE MODES
2.2.1 Mandatory and optional demand response modes
2.2.2 DRM2 and DRM 4 operation
2.3 MANUAL OVERRIDE
2.4 AUTOMATIC OVERRIDE
2.5 RESPONSE TIMES
2.6 OPERATION OF AUXILIARY EQUIPMENT
2.7 RUN-TIME ADJUSTMENT
2.8 STANDBY POWER
2.9 MUTIPLE OPERATIONAL INSTRUCTIONS
SECTION 3 INTERFACES
3.1 GENERAL
3.2 PHYSICAL INTERFACES
3.3 TERMINAL BLOCK
3.3.1 Terminal block pin assignments
3.3.2 Terminal block specifications
3.4 RJ45 SOCKET
3.4.1 RJ45 socket pin assignment
3.4.2 RJ45 socket specifications
3.5 CIRCUIT TO DRED
3.6 OPTIONAL 230 V AC POWER SUPPLY
3.7 OPTIONAL EXTRA-LOW VOLTAGE POWER SUPPLY
3.8 LOCATION AND ACCESS
SECTION 4 LABELLING AND MARKING OF DEMAND RESPONSE CAPABILITY
4.1 GENERAL
4.2 REGISTRATION
4.3 POINT OF SALE LABELLING
4.4 MARKING
4.5 DOCUMENTATION
SECTION 5 TESTING AND VERIFYING DEMAND RESPONSE CAPABILITY
5.1 VERIFICATION OF CLAIMED DEMAND RESPONSE CAPABILITY
5.2 SET UP FOR TESTING
5.3 VERIFICATION OF CLAIMED COMPLIANCE WITH DRM 1
5.3.1 Sequence of operations
5.3.2 Integral pump-unit controller
5.3.3 Separate pump-unit controller
5.4 VERIFICATION OF CLAIMED COMPLIANCE WITH DRM 2
5.4.1 Integral pump-unit controller
5.4.2 Separate pump-unit controller
5.5 VERIFICATION OF CLAIMED COMPLIANCE WITH DRM 4
5.5.1 Interrupting operation during a DRM 4 event
5.5.2 Switching on during a DRM 4 event
5.6 TEST REPORT
APPENDIX A - REGISTRATION INFORMATION FOR PUMP-UNIT CONTROLLERS
APPENDIX B - VERIFICATION OF CLAIMED DEMAND RESPONSE CAPABILITY FOR PUMP-UNIT CONTROLLERS, IN ACCORDANCE WITH AS/NZS 4755...
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Energy Efficiency (Energy Using Products) Regulations 2002
Ministry: Ministry of Business Innovation and Employment - Digital, Communications and Transformation (RSM)
Citation context:Similar Standards
-
AS/NZS 4325.1:1995
Compression and mechanical connectors for power cables with copper or aluminium conductors - Test methods and requirements
-
AS/NZS 4325.1:1995 A1
Compression and mechanical connectors for power cables with copper or aluminium conductors - Test methods and requirements: Amendment 1
-
AS/NZS 4396:1999
Connectors - Insulation piercing - For 0.6/1 kV aerial bundled cables
-
AS/NZS 4437:1996
Solderless crimped connections - General requirements, test methods and practical guidance
AS/NZS 4755.3.2:2014 DEMAND RESPONSE CAPABILITIES AND SUPPORTING TECHNOLOGIES FOR ELECTRICAL PRODUCTS - INTERACTION OF...
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 REFERENCED DOCUMENTS
1.3 DEFINITIONS
1.3.1 Asserted
1.3.2 Automatic override
1.3.3 Circumvention device
1.3.4 Demand response (DR)
1.3.5 Demand response capability
1.3.6 Demand response enabling device (DRED)
1.3.7 Demand response event
1.3.8 Demand response interface
1.3.9 Demand response mode (DRM)
1.3.10 Electrical product
1.3.11 Extra low voltage
1.3.12 Filtration pump-unit
1.3.13 Input energy
1.3.14 Input power
1.3.15 Integral pump-unit controller
1.3.16 Manual override
1.3.17 Model
1.3.18 Normal operation
1.3.19 Operational instruction (OI)
1.3.20 Original user settings
1.3.21 Pool equipment
1.3.22 Pump-unit
1.3.23 Pump-unit controller
1.3.24 Remote agent
1.3.25 Response time
1.3.26 RJ45 connector
1.3.27 Run-time adjustment
1.3.28 Sanitization controller
1.3.29 Scheduled off-time
1.3.30 Scheduled on-time
1.3.31 Safety extra-low voltage (SELV)
1.3.32 Separate pump-unit controller
1.3.33 Shall
1.3.34 Should
1.3.35 Switch
1.3.36 User
SECTION 2 OPERATIONAL INSTRUCTIONS AND DEMAND RESPONSE MODES
2.1 GENERAL PRINCIPLES
2.2 DEMAND RESPONSE MODES
2.2.1 Mandatory and optional demand response modes
2.2.2 DRM2 and DRM 4 operation
2.3 MANUAL OVERRIDE
2.4 AUTOMATIC OVERRIDE
2.5 RESPONSE TIMES
2.6 OPERATION OF AUXILIARY EQUIPMENT
2.7 RUN-TIME ADJUSTMENT
2.8 STANDBY POWER
2.9 MUTIPLE OPERATIONAL INSTRUCTIONS
SECTION 3 INTERFACES
3.1 GENERAL
3.2 PHYSICAL INTERFACES
3.3 TERMINAL BLOCK
3.3.1 Terminal block pin assignments
3.3.2 Terminal block specifications
3.4 RJ45 SOCKET
3.4.1 RJ45 socket pin assignment
3.4.2 RJ45 socket specifications
3.5 CIRCUIT TO DRED
3.6 OPTIONAL 230 V AC POWER SUPPLY
3.7 OPTIONAL EXTRA-LOW VOLTAGE POWER SUPPLY
3.8 LOCATION AND ACCESS
SECTION 4 LABELLING AND MARKING OF DEMAND RESPONSE CAPABILITY
4.1 GENERAL
4.2 REGISTRATION
4.3 POINT OF SALE LABELLING
4.4 MARKING
4.5 DOCUMENTATION
SECTION 5 TESTING AND VERIFYING DEMAND RESPONSE CAPABILITY
5.1 VERIFICATION OF CLAIMED DEMAND RESPONSE CAPABILITY
5.2 SET UP FOR TESTING
5.3 VERIFICATION OF CLAIMED COMPLIANCE WITH DRM 1
5.3.1 Sequence of operations
5.3.2 Integral pump-unit controller
5.3.3 Separate pump-unit controller
5.4 VERIFICATION OF CLAIMED COMPLIANCE WITH DRM 2
5.4.1 Integral pump-unit controller
5.4.2 Separate pump-unit controller
5.5 VERIFICATION OF CLAIMED COMPLIANCE WITH DRM 4
5.5.1 Interrupting operation during a DRM 4 event
5.5.2 Switching on during a DRM 4 event
5.6 TEST REPORT
APPENDIX A - REGISTRATION INFORMATION FOR PUMP-UNIT CONTROLLERS
APPENDIX B - VERIFICATION OF CLAIMED DEMAND RESPONSE CAPABILITY FOR PUMP-UNIT CONTROLLERS, IN ACCORDANCE WITH AS/NZS 4755...
Previous versions
AS/NZS 4755.3.2:2014
Online Library subscription pricing
The cost of your subscription will depend on which standards you want to access, and how many people in your organisation need to be able to access the Online Library subscription at the same time (concurrent users). During your subscription period, we are also able to make any necessary changes and ensure you are aware of any pricing changes that result. For a quote, contact our Online Library team by emailing onlinelibrary@standards.govt.nz.