AS/NZS 4422:1996
Playground surfacing - Specifications, requirements and test method
Specifies general requirements for surfacing to be used in children`s playgrounds and specific requirements for areas where impact energy attenuation is necessary. It suggests the factors that should be considered when selecting a playground surface and gives a method of test by which the impact energy attenuation can be determined; this test gives a critical fall height for a surface that represents the upper limit of its effectiveness in reducing head injury when using playground equipment conforming to AS 1924, Parts 1 and 2 or NZS 5828, Parts 2 and 3. Reprinted to incorporate Amendment 1:1999.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$70.20 NZD
|
|
| HardCopy |
$78.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 4422:1996 Playground surfacing - Specifications, requirements and test method
PREFACE
CONTENTS
FOREWORD
1 SCOPE
2 OBJECTIVE
3 REFERENCED DOCUMENTS
4 DEFINITIONS
4.1 Critical fall height
4.2 Drop height
4.3 Drop test
4.4 Early childhood
4.5 Effective drop height
4.6 Fall zone
4.7 Free height of fall
4.8 g
4.9 g-max
4.10 Head injury criteria (HIC)
4.11 Impact attenuation
4.12 Impact measurement
4.13 Loose fill material
4.14 Solid surfacing
4.15 Surfacing
4.16 Test position
5 GENERAL REQUIREMENTS
5.1 Tripping hazards
5.2 Abrasion hazards
5.3 Toxicity hazards
5.4 Inhalation hazard
5.5 Performance information
5.5 Loose fill
5.6 Identification
6 SPECIFIC REQUIREMENTS FOR IMPACT ATTENUATION
6.1 Fall heights up to 50 cm
6.2 Fall heights over 50 cm
6.3 No impact energy attenuation
6.4 Impact attenuation requirements
6.4.1 General
6.4.2 Laboratory testing
6.4.3 On-site testing
6.5 Loose fill material
7 FALL ZONES
7.1 General
7.2 Fall zone dimensions
APPENDIX A - DETERMINATION OF HIC AND g VALUES
A1 PRINCIPLE
A2 APPARATUS
A2.1 Fall test headform
A2.2 Accelerometer
A2.3 Impact measurement equipment
A3 TEST CONDITIONS
A3.1 General
A3.2 Representative conditions
A3.3 Specific conditions
A3.4 Laboratory test specimens
A4 TEST PROCEDURE
A4.1 Selecting the test position
A4.2 Specific test procedures (see Figure A2)
A4.3 Selection of data for determination of critical fall height
A5 CALCULATION OF RESULTS
A5.1 HIC
A5.2 Material allowance
A6 TEST REPORT
APPENDIX B - GUIDANCE ON MINIMUM FALL ZONES
B1 SCOPE
B2 DETERMINATION OF FALL ZONE DIMENSIONS
B2.1 Equipment usage
B2.2 Area
B2.3 Measurement points
Amendments
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
References
Specification for playgrounds and playground equipment - General guidelines for new and existing playgrounds - equipment and surfacing
Related Information
Similar Standards
-
AS/NZS 60335.2.82:2015 (Excludes IEC text)
Household and similar electrical appliances - Safety - Part 2.82: Particular requirements for amusement machines and personal service machines -
AS/NZS 60335.2.82:2015 (Includes IEC text)
Household and similar electrical appliances - Safety - Part 2.82: Particular requirements for amusement machines and personal service machines -
AS/NZS 60335.2.82:2018 (Excludes IEC text)
Household and similar electrical appliances – Safety – Part 2.82: Particular requirements for amusement machines and personal service machines -
AS/NZS 60335.2.82:2018 (Includes IEC text)
Household and similar electrical appliances – Safety – Part 2.82: Particular requirements for amusement machines and personal service machines
AS/NZS 4422:1996 Playground surfacing - Specifications, requirements and test method
PREFACE
CONTENTS
FOREWORD
1 SCOPE
2 OBJECTIVE
3 REFERENCED DOCUMENTS
4 DEFINITIONS
4.1 Critical fall height
4.2 Drop height
4.3 Drop test
4.4 Early childhood
4.5 Effective drop height
4.6 Fall zone
4.7 Free height of fall
4.8 g
4.9 g-max
4.10 Head injury criteria (HIC)
4.11 Impact attenuation
4.12 Impact measurement
4.13 Loose fill material
4.14 Solid surfacing
4.15 Surfacing
4.16 Test position
5 GENERAL REQUIREMENTS
5.1 Tripping hazards
5.2 Abrasion hazards
5.3 Toxicity hazards
5.4 Inhalation hazard
5.5 Performance information
5.5 Loose fill
5.6 Identification
6 SPECIFIC REQUIREMENTS FOR IMPACT ATTENUATION
6.1 Fall heights up to 50 cm
6.2 Fall heights over 50 cm
6.3 No impact energy attenuation
6.4 Impact attenuation requirements
6.4.1 General
6.4.2 Laboratory testing
6.4.3 On-site testing
6.5 Loose fill material
7 FALL ZONES
7.1 General
7.2 Fall zone dimensions
APPENDIX A - DETERMINATION OF HIC AND g VALUES
A1 PRINCIPLE
A2 APPARATUS
A2.1 Fall test headform
A2.2 Accelerometer
A2.3 Impact measurement equipment
A3 TEST CONDITIONS
A3.1 General
A3.2 Representative conditions
A3.3 Specific conditions
A3.4 Laboratory test specimens
A4 TEST PROCEDURE
A4.1 Selecting the test position
A4.2 Specific test procedures (see Figure A2)
A4.3 Selection of data for determination of critical fall height
A5 CALCULATION OF RESULTS
A5.1 HIC
A5.2 Material allowance
A6 TEST REPORT
APPENDIX B - GUIDANCE ON MINIMUM FALL ZONES
B1 SCOPE
B2 DETERMINATION OF FALL ZONE DIMENSIONS
B2.1 Equipment usage
B2.2 Area
B2.3 Measurement points
Amendments
AS/NZS 4422:1996
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.