AS/NZS 2589:2007
Gypsum linings - Application and finishing
Provides manufacturers and users of gypsum linings with specifications covering the application and finishing of linings in residential and commercial construction applications. This Standard provides a reference for the building industry and specifiers, and a basic standard for adoption in contracts.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$171.90 NZD
|
|
| HardCopy |
$191.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription pricing The cost of your subscription will depend on which standards you want to access, and how many people in your organisation need to be able to access the Online Library subscription at the same time (concurrent users). During your subscription period, we are also able to make any necessary changes and ensure you are aware of any pricing changes that result. For a quote, contact our Online Library team by emailing onlinelibrary@standards.govt.nz. |
AS/NZS 2589:2007 GYPSUM LININGS-APPLICATION AND FINISHING
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 APPLICATION
1.3 NORMATIVE REFERENCES
1.4 DEFINITIONS
1.4.1 Administrative definitions
1.4.2 Technical definitions
1.5 ALTERNATIVE SYSTEMS AND MATERIALS
SECTION 2 MATERIALS
2.1 GENERAL
2.2 GYPSUM PLASTERBOARD LINING
2.3 FIBRE-REINFORCED GYPSUM LINING
2.4 GYPSUM CORNICE
2.5 FRAMING SUBSTRATES
2.6 TIMBER FRAMING
2.6.1 General
2.6.2 Moisture content for Australia
2.6.3 Moisture content for New Zealand
2.7 METAL FRAMING
2.7.1 General
2.7.2 Fixing surfaces
2.8 MASONRY
2.9 FASTENERS
2.9.1 Screws
2.9.2 Nails
2.10 CORNER BEAD AND EDGE TRIM
2.11 JOINT REINFORCING TAPES AND CEMENTS FOR FINISHING
2.12 MASTIC ADHESIVE
2.13 CORNICE CEMENT
2.14 DECORATIVE MATERIALS
SECTION 3 DESIGN REQUIREMENTS
3.1 QUALITY OF GYPSUM LINING APPLICATION AND FINISHING
3.1.1 General
3.1.2 Gypsum lining finishes
3.1.3 Level 3
3.1.4 Level 4
3.1.5 Level 5
3.2 STRUCTURAL ACTIONS
3.2.1 Serviceability limit state
3.2.2 Ultimate limit state
3.3 STRUCTURAL MOVEMENT
3.4 CONTROL JOINTS
3.5 SUBSTRATES
3.5.1 General
3.5.2 Framing
3.5.3 Battens
3.5.4 Masonry
3.6 VENTILATION AND CONDENSATION
3.7 LIGHTING
3.8 ORIENTATION
3.9 PAINTING OF GYPSUM LININGS
3.10 DEVICES GENERATING HEAT
3.11 INSULATING SYSTEMS
3.12 EXTERNAL APPLICATIONS
SECTION 4 INSTALLATION
4.1 SITE CONSIDERATIONS
4.1.1 Site organization prior to commencement of lining
4.1.2 Storage and handling
4.2 SUBSTRATES
4.2.1 General
4.2.2 Finished framing deviations and tolerances
4.3 LAYOUT
4.3.1 General
4.3.2 Ceilings
4.3.3 Joints
4.3.4 Edge openings
4.3.5 Control joints
4.4 GYPSUM PLASTERBOARD
4.4.1 Cutting
4.4.2 Penetrations
4.4.3 Fastening systems
4.4.4 Fixing of linings
4.4.5 Finishing of gypsum plasterboard linings
4.5 FIBRE-REINFORCED GYPSUM LININGS
4.5.1 Cutting
4.5.2 Fixing
4.5.3 Finishing
4.6 FIXING OF CORNICES
4.7 INSULATING SYSTEMS
4.7.1 General
4.7.2 Electrical penetrations
4.7.3 Plumbing services
APPENDIX A - MEASURING THE MOISTURE CONTENT OF TIMBER FRAMING
A1 INTRODUCTION
A1.1 Timber shrinkage
A1.2 Testing of moisture content
A2 METHOD
A2.1 Principle
A2.2 Apparatus
A2.3 Accuracy
A2.4 Procedure for detached residential construction
APPENDIX B - DECORATION
B1 INTRODUCTION
B1.1 General
B1.2 Sealing the surfaces
B1.3 Gloss banding and sheen staining
B1.4 Expectations of painted gypsum plasterboard
B2 BRUSH, SPRAY OR ROLL
B2.1 Brush
B2.2 Spray
B2.3 Roller
B3 GLANCING LIGHT
B4 LEVEL OF FINISH AND PAINT SYSTEM
B4.1 General
B4.2 Summary
APPENDIX C - VISIBLE SAG IN CEILINGS
C1 GENERAL
C2 TEMPERATURE AND HUMIDITY
C3 TEST SET-UP
C4 FIXING METHODS
C5 PRE-CONDITIONING
C6 ACTIONS
C7 SERVICEABILITY
C8 TESTING
C9 TEST REPORT
APPENDIX D - DESIGN CONSIDERATIONS
D1 VENTILATION (FOR AUSTRALIA)
D2 CONDENSATION
D3 ORIENTATION
D4 RADIANT HEATING SYSTEMS
D5 STRUCTURAL MOVEMENT
D6 TRUSS SETTLEMENT
D7 LIGHTING
D7.1 General
D7.2 Daylight and electric light
D7.3 Diffuse and directional light
D7.4 Intensity of light
APPENDIX E - GUIDELINES FOR ASSESSMENT OF SURFACE DEVIATIONS AND TOLERANCES
E1 INTRODUCTION
E2 RECESS EDGE JOINTS
E3 BUTT JOINTS
E4 EXTERNAL ANGLES
E5 INTERNAL CORNERS
BIBLIOGRAPHY
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Guide to tolerances, materials and workmanship in new residential construction 2015
Ministry: Ministry of Business, Innovation, and Employment - Building Systems Performance (BSP)
Section: How to use this guide: Measurements
Citation context:More information on critical lighting and its effects is available from: AS/NZS 2589:2007 - Gypsum linings - Application and finishing (particularly Appendix C)...
Similar Standards
-
AS/NZS 1562.2:1999
Design and installation of sheet roof and wall cladding - Corrugated fibre-reinforced cement
-
AS/NZS 2350.0:1999
Methods of testing portland and blended cements - General introduction and list of methods
-
AS/NZS 2350.1:2006
Methods of testing portland and blended cements - Method 1: Sampling
-
AS/NZS 2350.11:2006
Methods of testing portland and blended cements - Method 11: Compressive strength
AS/NZS 2589:2007 GYPSUM LININGS-APPLICATION AND FINISHING
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 APPLICATION
1.3 NORMATIVE REFERENCES
1.4 DEFINITIONS
1.4.1 Administrative definitions
1.4.2 Technical definitions
1.5 ALTERNATIVE SYSTEMS AND MATERIALS
SECTION 2 MATERIALS
2.1 GENERAL
2.2 GYPSUM PLASTERBOARD LINING
2.3 FIBRE-REINFORCED GYPSUM LINING
2.4 GYPSUM CORNICE
2.5 FRAMING SUBSTRATES
2.6 TIMBER FRAMING
2.6.1 General
2.6.2 Moisture content for Australia
2.6.3 Moisture content for New Zealand
2.7 METAL FRAMING
2.7.1 General
2.7.2 Fixing surfaces
2.8 MASONRY
2.9 FASTENERS
2.9.1 Screws
2.9.2 Nails
2.10 CORNER BEAD AND EDGE TRIM
2.11 JOINT REINFORCING TAPES AND CEMENTS FOR FINISHING
2.12 MASTIC ADHESIVE
2.13 CORNICE CEMENT
2.14 DECORATIVE MATERIALS
SECTION 3 DESIGN REQUIREMENTS
3.1 QUALITY OF GYPSUM LINING APPLICATION AND FINISHING
3.1.1 General
3.1.2 Gypsum lining finishes
3.1.3 Level 3
3.1.4 Level 4
3.1.5 Level 5
3.2 STRUCTURAL ACTIONS
3.2.1 Serviceability limit state
3.2.2 Ultimate limit state
3.3 STRUCTURAL MOVEMENT
3.4 CONTROL JOINTS
3.5 SUBSTRATES
3.5.1 General
3.5.2 Framing
3.5.3 Battens
3.5.4 Masonry
3.6 VENTILATION AND CONDENSATION
3.7 LIGHTING
3.8 ORIENTATION
3.9 PAINTING OF GYPSUM LININGS
3.10 DEVICES GENERATING HEAT
3.11 INSULATING SYSTEMS
3.12 EXTERNAL APPLICATIONS
SECTION 4 INSTALLATION
4.1 SITE CONSIDERATIONS
4.1.1 Site organization prior to commencement of lining
4.1.2 Storage and handling
4.2 SUBSTRATES
4.2.1 General
4.2.2 Finished framing deviations and tolerances
4.3 LAYOUT
4.3.1 General
4.3.2 Ceilings
4.3.3 Joints
4.3.4 Edge openings
4.3.5 Control joints
4.4 GYPSUM PLASTERBOARD
4.4.1 Cutting
4.4.2 Penetrations
4.4.3 Fastening systems
4.4.4 Fixing of linings
4.4.5 Finishing of gypsum plasterboard linings
4.5 FIBRE-REINFORCED GYPSUM LININGS
4.5.1 Cutting
4.5.2 Fixing
4.5.3 Finishing
4.6 FIXING OF CORNICES
4.7 INSULATING SYSTEMS
4.7.1 General
4.7.2 Electrical penetrations
4.7.3 Plumbing services
APPENDIX A - MEASURING THE MOISTURE CONTENT OF TIMBER FRAMING
A1 INTRODUCTION
A1.1 Timber shrinkage
A1.2 Testing of moisture content
A2 METHOD
A2.1 Principle
A2.2 Apparatus
A2.3 Accuracy
A2.4 Procedure for detached residential construction
APPENDIX B - DECORATION
B1 INTRODUCTION
B1.1 General
B1.2 Sealing the surfaces
B1.3 Gloss banding and sheen staining
B1.4 Expectations of painted gypsum plasterboard
B2 BRUSH, SPRAY OR ROLL
B2.1 Brush
B2.2 Spray
B2.3 Roller
B3 GLANCING LIGHT
B4 LEVEL OF FINISH AND PAINT SYSTEM
B4.1 General
B4.2 Summary
APPENDIX C - VISIBLE SAG IN CEILINGS
C1 GENERAL
C2 TEMPERATURE AND HUMIDITY
C3 TEST SET-UP
C4 FIXING METHODS
C5 PRE-CONDITIONING
C6 ACTIONS
C7 SERVICEABILITY
C8 TESTING
C9 TEST REPORT
APPENDIX D - DESIGN CONSIDERATIONS
D1 VENTILATION (FOR AUSTRALIA)
D2 CONDENSATION
D3 ORIENTATION
D4 RADIANT HEATING SYSTEMS
D5 STRUCTURAL MOVEMENT
D6 TRUSS SETTLEMENT
D7 LIGHTING
D7.1 General
D7.2 Daylight and electric light
D7.3 Diffuse and directional light
D7.4 Intensity of light
APPENDIX E - GUIDELINES FOR ASSESSMENT OF SURFACE DEVIATIONS AND TOLERANCES
E1 INTRODUCTION
E2 RECESS EDGE JOINTS
E3 BUTT JOINTS
E4 EXTERNAL ANGLES
E5 INTERNAL CORNERS
BIBLIOGRAPHY
Previous versions
AS/NZS 2589:2007
Online Library subscription pricing
The cost of your subscription will depend on which standards you want to access, and how many people in your organisation need to be able to access the Online Library subscription at the same time (concurrent users). During your subscription period, we are also able to make any necessary changes and ensure you are aware of any pricing changes that result. For a quote, contact our Online Library team by emailing onlinelibrary@standards.govt.nz.