MP 87:2004
Australian/New Zealand Certification Scheme for explosion-protected electrical equipment (ANZEx Scheme) - Basic rules and procedures
Contains the basic rules and procedures for the management, administration and operation of the Australian/New Zealand Certification Scheme (ANZEx Scheme) for explosion-protected electrical equipment; which embraces certification of electrical equipment intended for use in explosive atmospheres. Proposed as the National Scheme in Australia and New Zealand. Reprinted to incorporate Amendments 1 & 2:2006.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$113.21 NZD
|
|
| HardCopy |
$125.79 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
MP 87:2004 AUSTRALIAN/NEW ZEALAND CERTIFICATION SCHEME FOR EXPLOSION-PROTECTED ELECTRICAL EQUIPMENT (ANZEX SCHEME)-BASIC...
PREFACE
CONTENTS
SECTION 1 GENERAL
1.1 INTRODUCTION
1.2 REFERENCE DOCUMENTS
1.3 DEFINITIONS
1.3.1 ANZEx Certification Body (ANZEx-CB)
1.3.2 ANZEx Quality Assessment Report (ANZEx QAR)
1.3.3 ANZEx Testing Laboratory (ANZEx-TL)
1.3.4 ANZEx Test Report (ANZEx TR)
1.3.5 Certificate holder
1.3.6 Certificate Number Prefix
1.3.7 Certificate of Conformity
1.3.8 Ex apparatus
1.3.9 Ex component
1.3.10 Ex equipment
1.3.11 Ex system
1.3.12 IECEx Test Report (ExTR)
1.3.13 Manufacturer
1.3.14 Product Quality Plan (PQP)
1.3.15 Restricted Type Test Certificate
1.4 ABBREVIATIONS
SECTION 2 BASIC RULES OF THE ANZEx SCHEME
2.1 TITLE
2.2 OBJECTIVE
2.3 SCOPE
2.4 GOVERNING DOCUMENT
2.5 ORGANIZATIONAL STRUCTURE
2.5.1 General
2.5.2 Roles and responsibilities of the management and operational bodies
2.6 CRITERIA FOR THE ACCEPTANCE OF CERTIFICATION BODIES AND TEST LABORATORIES
2.6.1 General
2.6.2 ANZEx Certification Bodies (ANZExŒCBs)
2.6.3 ANZEx Testing Laboratories (ANZExŒTLs)
2.7 ANZEx SCHEME INSTRUMENTS-CERTIFICATE OF CONFORMITY AND THE CERTIFICATE NUMBER PREFIX
2.8 CONDITIONS FOR THE USE OF THE CERTIFICATE NUMBER PREFIX
2.8.1 General conditions for the use of the Certificate Number Prefix
2.8.2 Advertising the Certificate Number Prefix
2.8.3 Activities constituting misuse of the Certificate Number Prefix
2.9 CONTROL OF THE CONTENTS OF CERTIFICATES OF CONFORMITY
2.10 FACTORS AFFECTING THE ISSUING, MAINTENANCE AND WITHDRAWAL OF CERTIFICATES OF CONFORMITY
2.10.1 Powers of the Management Body
2.10.2 Suspension of Certification
2.10.3 Cancellation or withdrawal of Certification
2.10.4 Rights of appeal
2.10.5 Relinquishment of certification
2.10.6 Non-conformance notification
2.11 MAINTAINING CERTIFICATION
2.12 TRANSFER OF CERTIFICATES OF CONFORMITY
2.13 OBLIGATIONS OF THE CERTIFICATE HOLDERS
2.14 ESTABLISHING CERTIFICATE NUMBERS
2.15 CONFIDENTIALITY
2.16 NOTICES
2.17 FEES
SECTION 3 PROCEDURES FOR THE ANZEx SCHEME
3.1 GENERAL
3.2 OBTAINING CERTIFICATION
3.3 APPLICATION PROCESS FOR ANZEx CERTIFICATES OF CONFORMITY
3.3.1 Product Testing component
3.3.2 Quality Management System component (including Product Quality Plan)
3.3.3 Certificates of Conformity
3.4 CERTIFICATION MAINTENANCE
3.4.1 Surveillance
3.4.2 Amendments to Certificates of Conformity
SECTION 4 RESTRICTED TYPE TEST CERTIFICATE
APPENDIX A - BACKGROUND INFORMATION RELATING TO THE ANZEx SCHEME
APPENDIX B - ORGANIZATIONAL BODIES OF THE ANZEx SCHEME
B1 MANAGEMENT BODY
B2 ADMINISTERING BODY
B3 ANZEx CERTIFICATION BODIES (ANZExŒCBs )
B4 ANZEx TESTING LABORATORIES (ANZExŒTLs)
APPENDIX C - LIST OF NATIONAL AND INTERNATIONAL STANDARDS THAT MAY BE USED IN THE ANZEx SCHEME, AT THE TIME OF PUBLICATION
C1 STANDARDS FOR EXPLOSION-PROTECTED ELECTRICAL EQUIPMENT/ APPARATUS (EQUIPMENT/APPARATUS STANDARDS)
C1.1 Joint Standards
C1.2 Australian Standards
C1.3 IEC Standards
C2 OTHER RELEVANT STANDARDS
C2.1 Joint Standards
C2.2 Australian Standards
C2.3 IEC Standards
APPENDIX D - BASIC DOCUMENTATION FOR APPLICATION FOR CERTIFICATION AND AMENDMENTS
APPENDIX E - ANZEx QUALITY MANAGEMENT SYSTEM REQUIREMENTS
E1 SCOPE
E2 NORMATIVE REFERENCES
E3 TERMS AND DEFINITIONS
E3.1 Contract
E3.2 Customer complaint
E3.3 Product
E3.4 Schedule drawing
E3.5 Related drawing
E3.6 Technical documentation
E4 QUALITY MANAGEMENT SYSTEM
E4.1 General requirements
E4.2 Documentation requirements
E5 MANAGEMENT RESPONSIBILITY
E5.1 Management commitment
E5.2 Customer focus
E5.3 Quality policy
E5.4 Planning
E5.5 Responsibility, authority and communication
E5.6 Management review
E6 Resource management
E6.1 Provision of resources
E6.2 Human resources
E6.3 Facilities
E6.4 Work environment
E7 Product realization
E7.1 Planning of realization processes
E7.2 Customer-related processes
E7.3 Design and development
E7.4 Purchasing
E7.5 Production
E7.6 Control of monitoring and measuring devices
E8 Measurement, analysis and improvement
E8.1 Planning
E8.2 Monitoring and measuring
E8.3 Control of nonconforming product
E8.4 Analysis of data
E8.5 Improvement
APPENDIX F - INFORMATION RELEVANT TO PARTICULAR TYPES OF EXPLOSION-PROTECTION TECHNIQUES
F1 INTRODUCTION
F2 GENERAL
F3 Ex 'd'-FLAMEPROOF ENCLOSURES
F3.1 Castings
F3.2 Machining
F3.3 Cemented joints and potted assemblies
F3.4 Routine pressure testing
F3.5 Flanged joints
F3.6 Sintered components
F4 Ex 'i'-INTRINSIC SAFETY
F4.1 Components for intrinsically safe products
F4.2
F4.3 Sub-assemblies and assemblies
F4.4 Tests
F4.5 Intrinsically safe circuits and assemblies housed in Ex‚d™, Ex‚p™ or Ex‚q™ enclosures
F5 Ex'e'INCREASED SAFETY
F5.1 Ingress protection
F5.2 Internal wiring and contact integrity
F5.3 Rotating machines
F5.4 Windings
F5.5 Tests
F6 Ex 'p'-PRESSURIZED APPARATUS
F6.1 Ingress protection
F6.2 Tests
F7 Ex 'm'-ENCAPSULATION
F7.1 Production documentation
F7.2 Tests
F8 Ex 'o'-OIL IMMERSION
F9 Ex 'q'-POWDER FILLING
F9.1 Material control
F9.2 Filling
F9.3 Ingress protection
F9.4 Tests
F10 VERIFICATION CRITERIA FOR SINTERED COMPONENTS USED AS AN INTEGRAL PART OF A TYPE OF EXPLOSION-PROTECTION
F10.1 Introduction
F10.2 Verification guidance
F10.3 Tests
F10.4 Test examples
F10.5 Purchase information
F10.6 Pre-tested components
F10.7 Measurement and monitoring
Previous versions
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
References
Electrical apparatus for use in the presence of combustible dust - Electrical apparatus protected by enclosures and surface temperature limitation - Selection, installation and maintenance
Caplights for use in mines susceptible to firedamp - Performance and other safety-related matters
Quality management and quality system elements - Guidelines for quality plans
Related Information
Similar Standards
-
AS/NZS 3584.1:2008
Diesel engine systems for underground coal mines - Fire protected - Heavy duty
-
AS/NZS 3584.2:2008
Diesel engine systems for underground coal mines - Explosion protected
-
AS/NZS 3584.3:2012
Diesel engine systems for underground coal mines - Part 3: Maintenance -
AS/NZS 3800:2020
Electrical equipment for explosive atmospheres - Repair and overhaul
MP 87:2004 AUSTRALIAN/NEW ZEALAND CERTIFICATION SCHEME FOR EXPLOSION-PROTECTED ELECTRICAL EQUIPMENT (ANZEX SCHEME)-BASIC...
PREFACE
CONTENTS
SECTION 1 GENERAL
1.1 INTRODUCTION
1.2 REFERENCE DOCUMENTS
1.3 DEFINITIONS
1.3.1 ANZEx Certification Body (ANZEx-CB)
1.3.2 ANZEx Quality Assessment Report (ANZEx QAR)
1.3.3 ANZEx Testing Laboratory (ANZEx-TL)
1.3.4 ANZEx Test Report (ANZEx TR)
1.3.5 Certificate holder
1.3.6 Certificate Number Prefix
1.3.7 Certificate of Conformity
1.3.8 Ex apparatus
1.3.9 Ex component
1.3.10 Ex equipment
1.3.11 Ex system
1.3.12 IECEx Test Report (ExTR)
1.3.13 Manufacturer
1.3.14 Product Quality Plan (PQP)
1.3.15 Restricted Type Test Certificate
1.4 ABBREVIATIONS
SECTION 2 BASIC RULES OF THE ANZEx SCHEME
2.1 TITLE
2.2 OBJECTIVE
2.3 SCOPE
2.4 GOVERNING DOCUMENT
2.5 ORGANIZATIONAL STRUCTURE
2.5.1 General
2.5.2 Roles and responsibilities of the management and operational bodies
2.6 CRITERIA FOR THE ACCEPTANCE OF CERTIFICATION BODIES AND TEST LABORATORIES
2.6.1 General
2.6.2 ANZEx Certification Bodies (ANZExŒCBs)
2.6.3 ANZEx Testing Laboratories (ANZExŒTLs)
2.7 ANZEx SCHEME INSTRUMENTS-CERTIFICATE OF CONFORMITY AND THE CERTIFICATE NUMBER PREFIX
2.8 CONDITIONS FOR THE USE OF THE CERTIFICATE NUMBER PREFIX
2.8.1 General conditions for the use of the Certificate Number Prefix
2.8.2 Advertising the Certificate Number Prefix
2.8.3 Activities constituting misuse of the Certificate Number Prefix
2.9 CONTROL OF THE CONTENTS OF CERTIFICATES OF CONFORMITY
2.10 FACTORS AFFECTING THE ISSUING, MAINTENANCE AND WITHDRAWAL OF CERTIFICATES OF CONFORMITY
2.10.1 Powers of the Management Body
2.10.2 Suspension of Certification
2.10.3 Cancellation or withdrawal of Certification
2.10.4 Rights of appeal
2.10.5 Relinquishment of certification
2.10.6 Non-conformance notification
2.11 MAINTAINING CERTIFICATION
2.12 TRANSFER OF CERTIFICATES OF CONFORMITY
2.13 OBLIGATIONS OF THE CERTIFICATE HOLDERS
2.14 ESTABLISHING CERTIFICATE NUMBERS
2.15 CONFIDENTIALITY
2.16 NOTICES
2.17 FEES
SECTION 3 PROCEDURES FOR THE ANZEx SCHEME
3.1 GENERAL
3.2 OBTAINING CERTIFICATION
3.3 APPLICATION PROCESS FOR ANZEx CERTIFICATES OF CONFORMITY
3.3.1 Product Testing component
3.3.2 Quality Management System component (including Product Quality Plan)
3.3.3 Certificates of Conformity
3.4 CERTIFICATION MAINTENANCE
3.4.1 Surveillance
3.4.2 Amendments to Certificates of Conformity
SECTION 4 RESTRICTED TYPE TEST CERTIFICATE
APPENDIX A - BACKGROUND INFORMATION RELATING TO THE ANZEx SCHEME
APPENDIX B - ORGANIZATIONAL BODIES OF THE ANZEx SCHEME
B1 MANAGEMENT BODY
B2 ADMINISTERING BODY
B3 ANZEx CERTIFICATION BODIES (ANZExŒCBs )
B4 ANZEx TESTING LABORATORIES (ANZExŒTLs)
APPENDIX C - LIST OF NATIONAL AND INTERNATIONAL STANDARDS THAT MAY BE USED IN THE ANZEx SCHEME, AT THE TIME OF PUBLICATION
C1 STANDARDS FOR EXPLOSION-PROTECTED ELECTRICAL EQUIPMENT/ APPARATUS (EQUIPMENT/APPARATUS STANDARDS)
C1.1 Joint Standards
C1.2 Australian Standards
C1.3 IEC Standards
C2 OTHER RELEVANT STANDARDS
C2.1 Joint Standards
C2.2 Australian Standards
C2.3 IEC Standards
APPENDIX D - BASIC DOCUMENTATION FOR APPLICATION FOR CERTIFICATION AND AMENDMENTS
APPENDIX E - ANZEx QUALITY MANAGEMENT SYSTEM REQUIREMENTS
E1 SCOPE
E2 NORMATIVE REFERENCES
E3 TERMS AND DEFINITIONS
E3.1 Contract
E3.2 Customer complaint
E3.3 Product
E3.4 Schedule drawing
E3.5 Related drawing
E3.6 Technical documentation
E4 QUALITY MANAGEMENT SYSTEM
E4.1 General requirements
E4.2 Documentation requirements
E5 MANAGEMENT RESPONSIBILITY
E5.1 Management commitment
E5.2 Customer focus
E5.3 Quality policy
E5.4 Planning
E5.5 Responsibility, authority and communication
E5.6 Management review
E6 Resource management
E6.1 Provision of resources
E6.2 Human resources
E6.3 Facilities
E6.4 Work environment
E7 Product realization
E7.1 Planning of realization processes
E7.2 Customer-related processes
E7.3 Design and development
E7.4 Purchasing
E7.5 Production
E7.6 Control of monitoring and measuring devices
E8 Measurement, analysis and improvement
E8.1 Planning
E8.2 Monitoring and measuring
E8.3 Control of nonconforming product
E8.4 Analysis of data
E8.5 Improvement
APPENDIX F - INFORMATION RELEVANT TO PARTICULAR TYPES OF EXPLOSION-PROTECTION TECHNIQUES
F1 INTRODUCTION
F2 GENERAL
F3 Ex 'd'-FLAMEPROOF ENCLOSURES
F3.1 Castings
F3.2 Machining
F3.3 Cemented joints and potted assemblies
F3.4 Routine pressure testing
F3.5 Flanged joints
F3.6 Sintered components
F4 Ex 'i'-INTRINSIC SAFETY
F4.1 Components for intrinsically safe products
F4.2
F4.3 Sub-assemblies and assemblies
F4.4 Tests
F4.5 Intrinsically safe circuits and assemblies housed in Ex‚d™, Ex‚p™ or Ex‚q™ enclosures
F5 Ex'e'INCREASED SAFETY
F5.1 Ingress protection
F5.2 Internal wiring and contact integrity
F5.3 Rotating machines
F5.4 Windings
F5.5 Tests
F6 Ex 'p'-PRESSURIZED APPARATUS
F6.1 Ingress protection
F6.2 Tests
F7 Ex 'm'-ENCAPSULATION
F7.1 Production documentation
F7.2 Tests
F8 Ex 'o'-OIL IMMERSION
F9 Ex 'q'-POWDER FILLING
F9.1 Material control
F9.2 Filling
F9.3 Ingress protection
F9.4 Tests
F10 VERIFICATION CRITERIA FOR SINTERED COMPONENTS USED AS AN INTEGRAL PART OF A TYPE OF EXPLOSION-PROTECTION
F10.1 Introduction
F10.2 Verification guidance
F10.3 Tests
F10.4 Test examples
F10.5 Purchase information
F10.6 Pre-tested components
F10.7 Measurement and monitoring
Previous versions
MP 87:2004
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.