ISO/PAS 19695:2015
Motorcycles — Functional safety
ISO/PAS 19695:2015 is intended to be applied to safety-related systems that include one or more electrical and/or electronic (E/E) systems and that are installed in series production two-wheeled or three-wheeled motorcycles.
ISO/PAS 19695:2015 Standard does not address unique E/E systems in special purpose vehicles, such as vehicles designed for competition.
ISO/PAS 19695:2015 Standard addresses possible hazards caused by malfunctioning behaviour of E/E safety-related systems, including interaction of these systems. It does not address hazards related to electric shock, fire, smoke, heat, radiation, toxicity, flammability, reactivity, corrosion, release of energy, and similar hazards, unless directly caused by malfunctioning behaviour of E/E safety-related systems.
ISO/PAS 19695:2015 Standard does not address the nominal performance of E/E systems, even if dedicated functional performance standards exist for these systems.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$118.26 NZD
|
|
| HardCopy |
$152.17 NZD
|
|
| Networkable PDF |
Price varies
|
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions, and abbreviated terms
4 Safety management during the concept phase and the product development
4.1 Objective
4.2 General
4.3 Input to this Clause
4.3.1 Prerequisites
4.3.2 Further supporting information
4.4 Requirements and recommendations
4.4.1 General
4.4.2 Confirmation measures: Types, independency, and authority
4.5 Work products
5 Hazard analysis and risk assessment
5.1 Objective
5.2 General
5.3 Input to this Clause
5.3.1 Prerequisites
5.3.2 Further supporting information
5.4 Requirements and recommendations
5.4.1 Initiation of the hazard analysis and risk assessment
5.4.2 Situation analysis and hazard identification
5.4.3 Classification of hazardous events
5.4.4 Determination of MSIL
5.4.5 Determination of ASIL and safety goals
5.4.6 Verification
5.5 Work products
6 Vehicle integration and testing
6.1 Objectives
6.2 General
6.3 Input to this Clause
6.3.1 Prerequisites
6.3.2 Further supporting information
6.4 Requirements and recommendations
6.4.1 Vehicle integration
6.4.2 Test goals and test methods during vehicle testing
6.5 Work products
7 Safety Validation
7.1 Objectives
7.2 General
7.3 Inputs to this Clause
7.3.1 Prerequisites
7.3.2 Further supporting information
7.4 Requirements and recommendation
7.4.1 Validation environment
7.4.2 Planning of validation
7.4.3 Execution of validation
7.4.4 Evaluation
7.5 Work products
Annex A (informative) Hazard analysis and risk assessment for motorcycles
Annex B (informative) Example of controllability classification techniques
Bibliography
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
Related Information
Similar Standards
-
BS AU 193a:1990
Specification for replacement motor cycle and moped exhaust systems
-
BS AU 50-1.6.3a:1995
Tyres and wheels. Tyres. Motorcycle tyres, Specifications for designations, dimensions and load ratings for code designated series (diameter codes 4 to 12) tyres
-
BS AU 50-1.6.8:2000
Tyres and wheels. Tyres. Motorcycle tyres, Method of measuring tyre rolling circumference for new tyres under loaded conditions, Section 6: Motorcycle tyres Subsection 6.8: Method for measuring tyre rolling circumference for new tyres under loaded conditi
-
BS AU 50-1.7.1:1989
Tyres and wheels. Tyres. Moped tyres, Specification for tyre designations, dimensions and load ratings
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions, and abbreviated terms
4 Safety management during the concept phase and the product development
4.1 Objective
4.2 General
4.3 Input to this Clause
4.3.1 Prerequisites
4.3.2 Further supporting information
4.4 Requirements and recommendations
4.4.1 General
4.4.2 Confirmation measures: Types, independency, and authority
4.5 Work products
5 Hazard analysis and risk assessment
5.1 Objective
5.2 General
5.3 Input to this Clause
5.3.1 Prerequisites
5.3.2 Further supporting information
5.4 Requirements and recommendations
5.4.1 Initiation of the hazard analysis and risk assessment
5.4.2 Situation analysis and hazard identification
5.4.3 Classification of hazardous events
5.4.4 Determination of MSIL
5.4.5 Determination of ASIL and safety goals
5.4.6 Verification
5.5 Work products
6 Vehicle integration and testing
6.1 Objectives
6.2 General
6.3 Input to this Clause
6.3.1 Prerequisites
6.3.2 Further supporting information
6.4 Requirements and recommendations
6.4.1 Vehicle integration
6.4.2 Test goals and test methods during vehicle testing
6.5 Work products
7 Safety Validation
7.1 Objectives
7.2 General
7.3 Inputs to this Clause
7.3.1 Prerequisites
7.3.2 Further supporting information
7.4 Requirements and recommendation
7.4.1 Validation environment
7.4.2 Planning of validation
7.4.3 Execution of validation
7.4.4 Evaluation
7.5 Work products
Annex A (informative) Hazard analysis and risk assessment for motorcycles
Annex B (informative) Example of controllability classification techniques
Bibliography