ISO/IEC TR 63306-1:2020
Smart manufacturing standards map (SM2) - Part 1: Framework
ISO/IEC TR 63306-1:2020 This document describes the framework and the vocabulary that are used for the development of entries in the Smart Manufacturing Standards Map Catalogue. These enable the mapping and linking of standards and standard projects related to various aspects of smart manufacturing (product, production, supply chain, industrial services ...).
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$403.48 NZD
|
|
| HardCopy |
$459.13 NZD
|
|
| Networkable PDF |
Price varies
|
CONTENTS
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Principle of the Smart Manufacturing Standards Map (SM2)
4.1 Framework
4.2 SM2 Catalogue
4.3 Graphical representations
5 Overview of the SM2 Vocabulary
5.1 Summary of characteristics and blocks
5.2 Values of the characteristics
5.3 Qualifier
6 Block "Identification"
6.1 Composition
6.2 Qualifier
6.3 Sub-block "Reference"
6.3.1 Characteristic "Status"
6.3.2 Characteristic "Standard number"
6.4 Sub-block "Publication"
6.4.1 Characteristic "Edition"
6.4.2 Characteristic "Publication date"
6.5 Sub-block "Project"
6.5.1 Characteristic "Project number"
6.5.2 Characteristic "Forecast publication date"
6.6 Sub-block "Owner"
6.6.1 Characteristic "Organization"
6.6.2 Characteristic "Committee number"
6.6.3 Characteristic "Committee title"
6.7 Sub-block "ICS"
6.7.1 Characteristic "International Classification for Standards"
6.7.2 Other characteristics
6.8 Sub-block "Title"
6.8.1 Characteristic "Standard title"
6.8.2 Characteristic "Standard short title"
7 Block "Object"
7.1 Composition
7.2 Qualifier
7.3 Sub-block "Type of standard"
7.3.1 Description
7.3.2 Characteristics
7.4 Sub-block "Type of object"
7.4.1 Description
7.4.2 Characteristics
7.5 Sub-block "Manufacturing process type"
7.5.1 Description
7.5.2 Characteristics
8 Block "Hierarchy"
8.1 Composition
8.2 Qualifier
8.3 Sub-block "Equipment hierarchy"
8.3.1 Description
8.3.2 Characteristics
8.4 Sub-block "Functional hierarchy"
8.4.1 Description
8.4.2 Characteristics
9 Block "Life cycle"
9.1 Composition
9.2 Qualifier
9.3 Sub-block "Product type life cycle"
9.3.1 Description
9.3.2 Characteristics
9.4 Sub-block "Product instance life cycle"
9.4.1 Description
9.4.2 Characteristics
9.5 Sub-block "Production system life cycle"
9.5.1 Description
9.5.2 Characteristics
10 Block "Interoperability"
10.1 General
10.2 Composition
10.3 Qualifier
10.4 Sub-block "Interoperability approach"
10.4.1 Description
10.4.2 Characteristics
10.5 Sub-block "Interoperability concern"
10.5.1 Description
10.5.2 Characteristics
10.6 Sub-block "Interoperability layer"
10.6.1 Description
10.6.2 Characteristics
11 Block "System engineering process"
11.1 General
11.2 Composition
11.3 Qualifier
11.4 Sub-block "Agreement processes"
11.4.1 Description
11.4.2 Characteristics
11.5 Sub-block "Organizational project-enabling processes"
11.5.1 Description
11.5.2 Characteristics
11.6 Sub-block "Technical management processes"
11.6.1 Description
11.6.2 Characteristics
11.7 Sub-block "Technical processes"
11.7.1 Description
11.7.2 Characteristics
12 Block "Relevance to SM"
12.1 Composition
12.2 Qualifier
12.3 Characteristic "Relevance level"
12.4 Characteristic "Motivation"
13 Block "Validation"
13.1 Composition
13.2 Qualifier
13.3 Characteristics specification
Annex A (informative)Compilation of definitions of smart manufacturing
Annex B (informative)Life cycles
Annex C (informative)Hierarchies
Annex D (informative)Interoperability
Annex E (informative)Big Picture history
Bibliography
Figures
Figure 1 – Principle of the SM2 Framework
Figure 2 – Example of populated SM2 Catalogue
Figure 3 – Example mapping of product catalogue data standards
Figure 4 – Example mapping structure for production system standards
Figure 5 – Example chart "Production system cube" with standard numbers
Figure 6 – Example chart "Production system cube" with short title
Figure 7 – Example 2D chart with standard numbers
Figure 8 – Example 2D chart with short title
Figure 9 – Product type life cycle
Figure 10 – GERA life cycle phases
Figure B.1 – Product type life cycle
Figure B.2 – Versions of a product type
Figure B.3 – Product type improvement
Figure B.4 – Product instance life time
Figure B.5 – Product instance and product type
Figure B.6 – Production system life cycle
Figure B.7 – The user and the external actors
Figure B.8 – From the design to maintenance
Figure B.9 – Spare component discontinued
Figure B.10 – Supply chain life cycle
Figure C.1 – RAMI4.0 Hierarchy
Figure D.1 – Grouping into interoperability layers
Figure E.1 – Standards landscape
Figure E.2 – History of the Big Picture project
Tables
Table 1 – Block "Identification": sub-blocks and characteristics
Table 2 – Block "Object": sub-blocks and characteristics
Table 3 – Block "Hierarchy": sub-blocks and characteristics
Table 4 – Block "Life cycle": sub-blocks and characteristics
Table 5 – Block "Interoperability": sub-blocks and characteristics
Table 6 – Block "System engineering process": sub-blocks and characteristics
Table 7 – Block "Relevance to SM": sub-blocks and characteristics
Table 8 – Block "Validation": sub-blocks and characteristics
Table 9 – Composition of the block "Identification"
Table 10 – Possible values of "Status"
Table 11 – Composition of the block "Object"
Table 12 – Characteristics of "Type of standard"
Table 13 – Characteristics of "Type of object"
Table 14 – Characteristics of "Manufacturing process type"
Table 15 – Composition of the block "Hierarchy"
Table 16 – Characteristics of "Equipment hierarchy"
Table 17 – Characteristics of "Functional hierarchy"
Table 18 – Composition of the block "Life cycle"
Table 19 – Characteristics of "Product type life cycle"
Table 20 – Characteristics of "Product instance life cycle"
Table 21 – Characteristics of "Production system life cycle"
Table 22 – Composition of the block "Interoperability"
Table 23 – Characteristics of "Interoperability approach"
Table 24 – Characteristics of "Interoperability concern"
Table 25 – Characteristics of "Interoperability layer"
Table 26 – Composition of the block "System engineering process"
Table 27 – Characteristics of "Agreement processes"
Table 28 – Characteristics of "Organizational project-enabling processes"
Table 29 – Characteristics of "Technical management processes"
Table 30 – Characteristics of "Technical processes"
Table 31 – Composition of the block "Relevance to SM"
Table 32 – Possible values of "Relevance level"
Table 33 – Composition of the block "Validation"
Table B.1 – Possible values of "RAMI4.0 Life cycle"
Table B.2 – Possible values of "IMSA Life cycle"
Table C.1 – Possible values of "Equipment hierarchy"
Table C.2 – Possible values of "Functional hierarchy"
Table C.3 – Possible values of "SGAM Zones"
Table C.4 – Possible values of "RAMI4.0 Hierarchy level"
Table C.5 – Possible values of "IMSA System hierarchy"
Table C.6 – Mapping on legacy hierarchies on the equipment hierarchy
Table C.7 – Mapping on legacy hierarchies on the equipment hierarchy
Table D.1 – Possible values of "Interoperability barrier"
Table D.2 – Interoperability categories defined by GWAC
Table D.3 – Possible values of "SGAM Interoperability Layers"
Table D.4 – Possible values of "RAMI4.0 Layer"
Table D.5 – Possible values of "IMSA Intelligent characteristics"
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
Related Information
Similar Standards
-
BS 1127-4:1990
Screwing dies and dienuts, Terminology for circular screwing dies
-
BS 1296-2:1972
Specification for single point cutting tools, Nomenclature
-
BS 4184:1994
Glossary for power presses, open front mechanical type
-
BS 4185-11:1983
Machine tool components, Recommendations for accuracy grades of gears
CONTENTS
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Principle of the Smart Manufacturing Standards Map (SM2)
4.1 Framework
4.2 SM2 Catalogue
4.3 Graphical representations
5 Overview of the SM2 Vocabulary
5.1 Summary of characteristics and blocks
5.2 Values of the characteristics
5.3 Qualifier
6 Block "Identification"
6.1 Composition
6.2 Qualifier
6.3 Sub-block "Reference"
6.3.1 Characteristic "Status"
6.3.2 Characteristic "Standard number"
6.4 Sub-block "Publication"
6.4.1 Characteristic "Edition"
6.4.2 Characteristic "Publication date"
6.5 Sub-block "Project"
6.5.1 Characteristic "Project number"
6.5.2 Characteristic "Forecast publication date"
6.6 Sub-block "Owner"
6.6.1 Characteristic "Organization"
6.6.2 Characteristic "Committee number"
6.6.3 Characteristic "Committee title"
6.7 Sub-block "ICS"
6.7.1 Characteristic "International Classification for Standards"
6.7.2 Other characteristics
6.8 Sub-block "Title"
6.8.1 Characteristic "Standard title"
6.8.2 Characteristic "Standard short title"
7 Block "Object"
7.1 Composition
7.2 Qualifier
7.3 Sub-block "Type of standard"
7.3.1 Description
7.3.2 Characteristics
7.4 Sub-block "Type of object"
7.4.1 Description
7.4.2 Characteristics
7.5 Sub-block "Manufacturing process type"
7.5.1 Description
7.5.2 Characteristics
8 Block "Hierarchy"
8.1 Composition
8.2 Qualifier
8.3 Sub-block "Equipment hierarchy"
8.3.1 Description
8.3.2 Characteristics
8.4 Sub-block "Functional hierarchy"
8.4.1 Description
8.4.2 Characteristics
9 Block "Life cycle"
9.1 Composition
9.2 Qualifier
9.3 Sub-block "Product type life cycle"
9.3.1 Description
9.3.2 Characteristics
9.4 Sub-block "Product instance life cycle"
9.4.1 Description
9.4.2 Characteristics
9.5 Sub-block "Production system life cycle"
9.5.1 Description
9.5.2 Characteristics
10 Block "Interoperability"
10.1 General
10.2 Composition
10.3 Qualifier
10.4 Sub-block "Interoperability approach"
10.4.1 Description
10.4.2 Characteristics
10.5 Sub-block "Interoperability concern"
10.5.1 Description
10.5.2 Characteristics
10.6 Sub-block "Interoperability layer"
10.6.1 Description
10.6.2 Characteristics
11 Block "System engineering process"
11.1 General
11.2 Composition
11.3 Qualifier
11.4 Sub-block "Agreement processes"
11.4.1 Description
11.4.2 Characteristics
11.5 Sub-block "Organizational project-enabling processes"
11.5.1 Description
11.5.2 Characteristics
11.6 Sub-block "Technical management processes"
11.6.1 Description
11.6.2 Characteristics
11.7 Sub-block "Technical processes"
11.7.1 Description
11.7.2 Characteristics
12 Block "Relevance to SM"
12.1 Composition
12.2 Qualifier
12.3 Characteristic "Relevance level"
12.4 Characteristic "Motivation"
13 Block "Validation"
13.1 Composition
13.2 Qualifier
13.3 Characteristics specification
Annex A (informative)Compilation of definitions of smart manufacturing
Annex B (informative)Life cycles
Annex C (informative)Hierarchies
Annex D (informative)Interoperability
Annex E (informative)Big Picture history
Bibliography
Figures
Figure 1 – Principle of the SM2 Framework
Figure 2 – Example of populated SM2 Catalogue
Figure 3 – Example mapping of product catalogue data standards
Figure 4 – Example mapping structure for production system standards
Figure 5 – Example chart "Production system cube" with standard numbers
Figure 6 – Example chart "Production system cube" with short title
Figure 7 – Example 2D chart with standard numbers
Figure 8 – Example 2D chart with short title
Figure 9 – Product type life cycle
Figure 10 – GERA life cycle phases
Figure B.1 – Product type life cycle
Figure B.2 – Versions of a product type
Figure B.3 – Product type improvement
Figure B.4 – Product instance life time
Figure B.5 – Product instance and product type
Figure B.6 – Production system life cycle
Figure B.7 – The user and the external actors
Figure B.8 – From the design to maintenance
Figure B.9 – Spare component discontinued
Figure B.10 – Supply chain life cycle
Figure C.1 – RAMI4.0 Hierarchy
Figure D.1 – Grouping into interoperability layers
Figure E.1 – Standards landscape
Figure E.2 – History of the Big Picture project
Tables
Table 1 – Block "Identification": sub-blocks and characteristics
Table 2 – Block "Object": sub-blocks and characteristics
Table 3 – Block "Hierarchy": sub-blocks and characteristics
Table 4 – Block "Life cycle": sub-blocks and characteristics
Table 5 – Block "Interoperability": sub-blocks and characteristics
Table 6 – Block "System engineering process": sub-blocks and characteristics
Table 7 – Block "Relevance to SM": sub-blocks and characteristics
Table 8 – Block "Validation": sub-blocks and characteristics
Table 9 – Composition of the block "Identification"
Table 10 – Possible values of "Status"
Table 11 – Composition of the block "Object"
Table 12 – Characteristics of "Type of standard"
Table 13 – Characteristics of "Type of object"
Table 14 – Characteristics of "Manufacturing process type"
Table 15 – Composition of the block "Hierarchy"
Table 16 – Characteristics of "Equipment hierarchy"
Table 17 – Characteristics of "Functional hierarchy"
Table 18 – Composition of the block "Life cycle"
Table 19 – Characteristics of "Product type life cycle"
Table 20 – Characteristics of "Product instance life cycle"
Table 21 – Characteristics of "Production system life cycle"
Table 22 – Composition of the block "Interoperability"
Table 23 – Characteristics of "Interoperability approach"
Table 24 – Characteristics of "Interoperability concern"
Table 25 – Characteristics of "Interoperability layer"
Table 26 – Composition of the block "System engineering process"
Table 27 – Characteristics of "Agreement processes"
Table 28 – Characteristics of "Organizational project-enabling processes"
Table 29 – Characteristics of "Technical management processes"
Table 30 – Characteristics of "Technical processes"
Table 31 – Composition of the block "Relevance to SM"
Table 32 – Possible values of "Relevance level"
Table 33 – Composition of the block "Validation"
Table B.1 – Possible values of "RAMI4.0 Life cycle"
Table B.2 – Possible values of "IMSA Life cycle"
Table C.1 – Possible values of "Equipment hierarchy"
Table C.2 – Possible values of "Functional hierarchy"
Table C.3 – Possible values of "SGAM Zones"
Table C.4 – Possible values of "RAMI4.0 Hierarchy level"
Table C.5 – Possible values of "IMSA System hierarchy"
Table C.6 – Mapping on legacy hierarchies on the equipment hierarchy
Table C.7 – Mapping on legacy hierarchies on the equipment hierarchy
Table D.1 – Possible values of "Interoperability barrier"
Table D.2 – Interoperability categories defined by GWAC
Table D.3 – Possible values of "SGAM Interoperability Layers"
Table D.4 – Possible values of "RAMI4.0 Layer"
Table D.5 – Possible values of "IMSA Intelligent characteristics"