ISO/IEC 28360:2012
Information technology — Office equipment — Determination of chemical emission rates from electronic equipment
ISO/IEC 28360:2012 specifies methods to determine chemical emission rates of analyte from information and communication technology (ICT) and consumer electronics (CE) equipment during intended operation in an Emission Test Chamber (ETC).
The methods comprise preparation, sampling (or monitoring) in a controlled ETC, storage and analysis, calculation and reporting of emission rates.
ISO/IEC 28360:2012 includes specific methods for equipment using consumables, such as printers, and equipment not using consumables, such as monitors and PCs. It also specifies monochrome and colour print patterns for use in the operating phase of EUT using consumables (e.g. paper).
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$118.26 NZD
|
|
| HardCopy |
$152.17 NZD
|
|
| Networkable PDF |
Price varies
|
1 Scope
2 Conformance
3 Normative references
4 Terms and definitions
5 Symbols and abbreviated terms
5.1 Abbreviated terms
5.2 Symbols
6 Method overview
7 ETC requirements
7.1 Construction materials
7.2 Air tightness
7.3 Air mixing efficiency
8 Determination method
8.1 Test conditions
8.1.1 Operating temperature and relative humidity (rH)
8.1.2 Air exchange rate (n)
8.1.3 Air velocity
8.1.4 Sampled air flow
8.2 Handling of EUT and ETC
8.2.1 ETC purging
8.2.2 Background concentrations (Cbg)
8.2.3 EUT unpacking
8.2.4 Preparation of the EUT before testing
8.2.4.1 EUT not using consumables
8.2.4.2 EUT using consumables
8.2.5 EUT installation
8.2.5.1 EUT not using consumables
8.2.5.2 EUT using consumables
8.2.6 EUT operation during test
8.2.6.1 EUT not using consumables
8.2.6.2 EUT using consumables
8.2.6.2.1 Pre-operating phase
8.2.6.2.2 Operating phase
8.2.6.2.3 Post-operating phase
8.3 VOC, carbonyl compounds
8.3.1 Sorbents
8.3.2 Sample collection
8.3.2.1 Sample collection from EUT not using consumables
8.3.2.2 Sample collection from EUT using consumables
8.3.3 Emission rate calculation
8.3.3.1 EUT not using consumables
8.3.3.2 EUT using consumables
8.3.3.3 TVOC (RAL-UZ 122 Option)
8.4 Ozone
8.4.1 Analyser and sampling line requirements
8.4.2 Monitoring
8.4.3 Emission rate calculation
8.5 Particulate matter
8.5.1 Weighing and Filter conditioning
8.5.2 Sampling
8.5.3 Emission rate calculation
8.6 Fine and Ultrafine Particles (FP and UFP)
8.6.1 General Requirements for Aerosol Measuring Systems
8.6.1.1 Particle size range
8.6.1.2 Particle number concentration range
8.6.1.3 Time resolution
8.6.1.4 Connection of Aerosol Measuring System to ETC
8.6.1.5 Quality Assurance
8.6.2 Measurement
8.6.3 Calculation
8.6.3.1 Calculation of Particle loss rate coefficient β
8.6.3.2 Calculation of PER and TP
8.6.3.2.1 Case a)
8.6.3.2.2 Case b) (Calculation of PER(t))
8.6.3.2.3 Calculation of PER and TP, final steps
9 Test report
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
Related Information
Similar Standards
-
BS EN 1010-1:2004+A1:2010
Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines, Common requirements
-
BS EN 13023:2003+A1:2010
Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment. Accuracy grades 2 and 3
-
BS EN 61966-7-1:2006
Multimedia systems and equipment. Colour measurement and management, Colour printers. Reflective prints. RGB inputs
-
BS EN ISO 12643-1:2023
Graphic technology — Safety requirements for graphic technology equipment and systems, Part 1: General requirements
1 Scope
2 Conformance
3 Normative references
4 Terms and definitions
5 Symbols and abbreviated terms
5.1 Abbreviated terms
5.2 Symbols
6 Method overview
7 ETC requirements
7.1 Construction materials
7.2 Air tightness
7.3 Air mixing efficiency
8 Determination method
8.1 Test conditions
8.1.1 Operating temperature and relative humidity (rH)
8.1.2 Air exchange rate (n)
8.1.3 Air velocity
8.1.4 Sampled air flow
8.2 Handling of EUT and ETC
8.2.1 ETC purging
8.2.2 Background concentrations (Cbg)
8.2.3 EUT unpacking
8.2.4 Preparation of the EUT before testing
8.2.4.1 EUT not using consumables
8.2.4.2 EUT using consumables
8.2.5 EUT installation
8.2.5.1 EUT not using consumables
8.2.5.2 EUT using consumables
8.2.6 EUT operation during test
8.2.6.1 EUT not using consumables
8.2.6.2 EUT using consumables
8.2.6.2.1 Pre-operating phase
8.2.6.2.2 Operating phase
8.2.6.2.3 Post-operating phase
8.3 VOC, carbonyl compounds
8.3.1 Sorbents
8.3.2 Sample collection
8.3.2.1 Sample collection from EUT not using consumables
8.3.2.2 Sample collection from EUT using consumables
8.3.3 Emission rate calculation
8.3.3.1 EUT not using consumables
8.3.3.2 EUT using consumables
8.3.3.3 TVOC (RAL-UZ 122 Option)
8.4 Ozone
8.4.1 Analyser and sampling line requirements
8.4.2 Monitoring
8.4.3 Emission rate calculation
8.5 Particulate matter
8.5.1 Weighing and Filter conditioning
8.5.2 Sampling
8.5.3 Emission rate calculation
8.6 Fine and Ultrafine Particles (FP and UFP)
8.6.1 General Requirements for Aerosol Measuring Systems
8.6.1.1 Particle size range
8.6.1.2 Particle number concentration range
8.6.1.3 Time resolution
8.6.1.4 Connection of Aerosol Measuring System to ETC
8.6.1.5 Quality Assurance
8.6.2 Measurement
8.6.3 Calculation
8.6.3.1 Calculation of Particle loss rate coefficient β
8.6.3.2 Calculation of PER and TP
8.6.3.2.1 Case a)
8.6.3.2.2 Case b) (Calculation of PER(t))
8.6.3.2.3 Calculation of PER and TP, final steps
9 Test report