ISO 7175-2:2019
Furniture — Children's cots and folding cots for domestic use — Part 2: Test methods
This document specifies test methods to assess the safety of children's cots and folding cots for domestic use with an internal length of between 900 mm and 1 400 mm.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$281.74 NZD
|
|
| HardCopy |
$319.13 NZD
|
|
| Networkable PDF |
Price varies
|
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 General test conditions
4.1 Preliminary preparation
4.2 Test equipment
4.3 Application of forces
4.4 Tolerances
4.5 Test sequence
4.6 Prevention of movement during test
5 Test apparatus
6 Test procedures
6.1 Assembly and inspection
6.2 Stability — Test
6.3 Footholds
6.3.1 Determination of a foothold
6.3.2 Test of footholds
6.3.3 Measurement of distance between footholds and/or top of cot sides and ends
6.4 Measurements
6.4.1 Holes, gaps and openings inside the cot
6.4.2 Holes, gaps and openings on the outside of the cot
6.5 Small parts
6.5.1 General
6.5.2 Torque test
6.5.3 Tension test
6.6 Bite test
6.7 Tests for cot base and mattress base
6.7.1 Folding test of the mattress base and cot base
6.7.2 Strength of cot base and mattress base (impact test)
6.8 Strength of sides and ends
6.8.1 Static load test of slats (bending test)
6.8.2 Strength of sides or side slats (impact test)
6.8.3 Strength of corners (impact test)
6.8.4 Strength of mesh and flexible sides and ends (static load test)
6.9 Strength of frame and fastenings
6.9.1 Vertical static load test
6.9.2 Durability test
6.10 Snag points
6.11 Locking mechanisms
6.11.1 Durability
6.11.2 Strength
6.12 Stability test
7 Test report
Bibliography
Previous versions
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
Related Information
Similar Standards
-
AS/NZS 2172:2013
Cots for household use – Safety requirements -
AS/NZS 2195:2010
Folding cots - Safety requirements
-
AS/NZS 2195:2010 A1
Folding cots - Safety requirements: Amendment 1 -
AS/NZS 2195:2010 A2
Folding cots - Safety requirements: Amendment 2
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 General test conditions
4.1 Preliminary preparation
4.2 Test equipment
4.3 Application of forces
4.4 Tolerances
4.5 Test sequence
4.6 Prevention of movement during test
5 Test apparatus
6 Test procedures
6.1 Assembly and inspection
6.2 Stability — Test
6.3 Footholds
6.3.1 Determination of a foothold
6.3.2 Test of footholds
6.3.3 Measurement of distance between footholds and/or top of cot sides and ends
6.4 Measurements
6.4.1 Holes, gaps and openings inside the cot
6.4.2 Holes, gaps and openings on the outside of the cot
6.5 Small parts
6.5.1 General
6.5.2 Torque test
6.5.3 Tension test
6.6 Bite test
6.7 Tests for cot base and mattress base
6.7.1 Folding test of the mattress base and cot base
6.7.2 Strength of cot base and mattress base (impact test)
6.8 Strength of sides and ends
6.8.1 Static load test of slats (bending test)
6.8.2 Strength of sides or side slats (impact test)
6.8.3 Strength of corners (impact test)
6.8.4 Strength of mesh and flexible sides and ends (static load test)
6.9 Strength of frame and fastenings
6.9.1 Vertical static load test
6.9.2 Durability test
6.10 Snag points
6.11 Locking mechanisms
6.11.1 Durability
6.11.2 Strength
6.12 Stability test
7 Test report
Bibliography