ISO 5700:2013
Tractors for agriculture and forestry — Roll-over protective structures — Static test method and acceptance conditions
ISO 5700:2013 specifies a static test method and the acceptance conditions for roll-over protective structures (cab or frame) of wheeled or tracked tractors for agriculture and forestry.
It is applicable to tractors having at least two axles for wheels mounted with pneumatic tyres, or having tracks instead of wheels, with an unballasted tractor mass of not less than 600 kg and a minimum track width of the rear wheels greater than 1 150 mm. It is not applicable to tractors having a mass ratio (maximum permissible mass / reference mass) greater than 1,75.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$322.61 NZD
|
|
| HardCopy |
$362.61 NZD
|
|
| Networkable PDF |
Price varies
|
Section sec_1
Section sec_2
Section sec_3
Figure fig_1
Section sec_4
Table tab_1
Section sec_5
Section sec_5.1
Section sec_5.1.1
Section sec_5.1.2
Table tab_a
Figure fig_2
Table tab_b
Figure fig_3
Table tab_c
Figure fig_4
Section sec_5.1.2.1
Section sec_5.1.2.2
Section sec_5.1.2.3
Section sec_5.1.2.4
Section sec_5.1.3
Section sec_5.1.4
Table tab_d
Figure fig_5
Table tab_2
Section sec_5.2
Section sec_5.2.1
Section sec_5.2.2
Section sec_5.2.3
Section sec_5.2.4
Table tab_e
Figure fig_6
Section sec_6
Section sec_6.1
Section sec_6.2
Section sec_6.3
Section sec_6.4
Section sec_6.5
Section sec_6.6
Section sec_6.7
Section sec_6.8
Section sec_6.9
Section sec_6.10
Section sec_6.11
Section sec_7
Section sec_7.1
Section sec_7.1.1
Section sec_7.1.1.1
Section sec_7.1.1.2
Section sec_7.1.1.3
Section sec_7.1.1.4
Section sec_7.1.1.5
Section sec_7.1.2
Section sec_7.1.3
Section sec_7.2
Section sec_7.2.1
Section sec_7.2.1.1
Section sec_7.2.1.2
Section sec_7.2.1.3
Section sec_7.2.2
Section sec_7.2.2.1
Section sec_7.2.2.2
Section sec_7.2.2.3
Section sec_7.2.2.4
Table tab_f
Figure fig_7
Table tab_g
Figure fig_8
Section sec_7.2.2.5
Section sec_7.2.2.6
Section sec_7.2.3
Section sec_7.2.3.1
Section sec_7.2.3.2
Section sec_7.2.3.3
Section sec_7.2.3.4
Section sec_7.3
Section sec_7.3.1
Section sec_7.3.1.1
Table tab_h
Figure fig_9
Table tab_i
Figure fig_10
Section sec_7.3.1.2
Table tab_j
Figure fig_11
Table tab_k
Figure fig_12
Section sec_7.3.2
Section sec_7.3.2.1
Section sec_7.3.2.2
Section sec_7.4
Section sec_7.4.1
Section sec_7.4.2
Section sec_8
Section sec_8.1
Section sec_8.2
Section sec_8.2.1
Section sec_8.2.2
Section sec_8.2.3
Section sec_8.2.4
Section sec_8.2.5
Section sec_8.2.6
Section sec_9
Section sec_9.1
Table tab_l
Figure fig_13
Section sec_9.2
Section sec_9.2.1
Section sec_9.2.2
Section sec_9.2.3
Section sec_9.2.4
Section sec_9.2.5
Section sec_9.2.6
Section sec_9.2.7
Section sec_9.2.8
Section sec_9.2.9
Section sec_9.2.10
Section sec_9.3
Table tab_m
Figure fig_14
Section sec_9.4
Section sec_9.4.1
Section sec_9.4.2
Section sec_10
Section sec_11
Section sec_11.1
Section sec_11.2
Section sec_11.3
Section sec_11.4
Section sec_11.5
Section sec_11.5.1
Section sec_11.5.2
Section sec_11.5.2.1
Section sec_11.5.2.2
Table tab_n
Figure fig_15
Table tab_o
Figure fig_16
Table tab_p
Figure fig_17
Section sec_11.6
Section sec_11.6.1
Section sec_11.6.2
Section sec_11.6.3
Section sec_11.7
Section sec_11.7.1
Section sec_11.7.2
Section sec_12
Section sec_12.1
Section sec_13
Section sec_13.1
Section sec_14
Section sec_14.1
Section sec_14.2
Section sec_14.2.1
Section sec_14.2.1.1
Section sec_14.2.1.2
Section sec_14.2.1.3
Section sec_14.2.1.4
Section sec_14.2.1.5
Section sec_14.2.2
Section sec_14.2.2.1
Section sec_14.2.2.2
Section sec_14.2.3
Section sec_14.2.3.1
Section sec_14.2.3.1.1
Section sec_14.2.3.1.2
Section sec_14.2.3.1.3
Section sec_14.2.4
Section sec_15
Section sec_15.1
Annex sec_A
Table tab_A.1
Annex sec_A.1
Annex sec_A.2
Annex sec_A.3
Annex sec_A.4
Annex sec_A.5
Table tab_A.2
Annex sec_B
Annex sec_B.1
Annex sec_B.2
Annex sec_B.2.1
Annex sec_B.2.1.1
Annex sec_B.2.2
Annex sec_B.2.3
Annex sec_B.2.4
Annex sec_B.3
Annex sec_B.3.1
Annex sec_B.3.2
Annex sec_B.3.3
Annex sec_B.3.4
Annex sec_B.3.5
Annex sec_B.3.6
Annex sec_B.3.7
Annex sec_B.4
Annex sec_B.4.1
Annex sec_B.4.1.1
Annex sec_B.4.1.2
Annex sec_B.4.1.3
Annex sec_B.4.2
Annex sec_B.4.3
Table tab_B.1
Annex sec_B.5
Annex sec_B.5.1
Annex sec_B.5.2
Annex sec_B.5.3
Annex sec_B.5.4
Annex sec_C
Reference ref_1
Reference ref_2
Reference ref_3
Reference ref_4
Reference ref_5
Reference ref_6
Reference ref_7
Reference ref_8
Reference ref_9
Annex C (informative) Designation of Maintenance Agency
Bibliography
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Apparatus
5.1 Horizontal loading tests
5.2 Crushing tests
6 Preparation of tractor and ROPS for testing
7 Test procedures
7.1 Sequence of tests
7.2 Horizontal loading from rear, front and side
7.3 Crushing tests
7.4 Second longitudinal loading
8 Determination of seat index point (SIP), seat location and adjustment for test
8.1 Seat index point
8.2 Seat location and adjustment for test
9 Clearance zone
9.1 Determination of the clearance zone
9.2 Determination of the clearance zone for tractors with a non-reversible seat
9.3 Determination of the clearance zone for tractors with a reversible driver’s position
9.4 Optional seats
10 Tolerances
11 Acceptance conditions
11.1 General
11.2 Clearance zone
11.3 Recording permanent deflection
11.4 Required force
11.5 Overload test
11.6 Additional conditions
11.7 Cold weather embrittlement
12 Seatbelt anchorage performance
13 Labelling
14 Extension to other tractor models
14.1 Administrative extension
14.2 Technical extension
15 Test report
Annex A (normative) Optional requirements for providing resistance to brittle fracture of roll-over protective structure at reduced operating temperature
Annex B (normative) Test report for roll-over protective structure
Annex C (informative) Designation of Maintenance Agency
Bibliography
Previous versions
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
Related Information
Similar Standards
-
AS/NZS 3576:1998
Clearing saws, brushcutters and grass trimmers - Guide to safe working practices
-
BS 4742-3:1985
Hydraulic equipment for agricultural machinery, Specification for dimensions and pressure rating of single-acting telescopic tipping cylinders for trailers
-
BS 4742-6:1988
Hydraulic equipment for agricultural machinery, Specification for dimensions and location of agricultural tractor hydraulic return to sump porting
-
BS 4742-7:1989
Hydraulic equipment for agricultural machinery, Specification for port connections for agricultural trailed vehicle hydraulic brake couplings
Section sec_1
Section sec_2
Section sec_3
Figure fig_1
Section sec_4
Table tab_1
Section sec_5
Section sec_5.1
Section sec_5.1.1
Section sec_5.1.2
Table tab_a
Figure fig_2
Table tab_b
Figure fig_3
Table tab_c
Figure fig_4
Section sec_5.1.2.1
Section sec_5.1.2.2
Section sec_5.1.2.3
Section sec_5.1.2.4
Section sec_5.1.3
Section sec_5.1.4
Table tab_d
Figure fig_5
Table tab_2
Section sec_5.2
Section sec_5.2.1
Section sec_5.2.2
Section sec_5.2.3
Section sec_5.2.4
Table tab_e
Figure fig_6
Section sec_6
Section sec_6.1
Section sec_6.2
Section sec_6.3
Section sec_6.4
Section sec_6.5
Section sec_6.6
Section sec_6.7
Section sec_6.8
Section sec_6.9
Section sec_6.10
Section sec_6.11
Section sec_7
Section sec_7.1
Section sec_7.1.1
Section sec_7.1.1.1
Section sec_7.1.1.2
Section sec_7.1.1.3
Section sec_7.1.1.4
Section sec_7.1.1.5
Section sec_7.1.2
Section sec_7.1.3
Section sec_7.2
Section sec_7.2.1
Section sec_7.2.1.1
Section sec_7.2.1.2
Section sec_7.2.1.3
Section sec_7.2.2
Section sec_7.2.2.1
Section sec_7.2.2.2
Section sec_7.2.2.3
Section sec_7.2.2.4
Table tab_f
Figure fig_7
Table tab_g
Figure fig_8
Section sec_7.2.2.5
Section sec_7.2.2.6
Section sec_7.2.3
Section sec_7.2.3.1
Section sec_7.2.3.2
Section sec_7.2.3.3
Section sec_7.2.3.4
Section sec_7.3
Section sec_7.3.1
Section sec_7.3.1.1
Table tab_h
Figure fig_9
Table tab_i
Figure fig_10
Section sec_7.3.1.2
Table tab_j
Figure fig_11
Table tab_k
Figure fig_12
Section sec_7.3.2
Section sec_7.3.2.1
Section sec_7.3.2.2
Section sec_7.4
Section sec_7.4.1
Section sec_7.4.2
Section sec_8
Section sec_8.1
Section sec_8.2
Section sec_8.2.1
Section sec_8.2.2
Section sec_8.2.3
Section sec_8.2.4
Section sec_8.2.5
Section sec_8.2.6
Section sec_9
Section sec_9.1
Table tab_l
Figure fig_13
Section sec_9.2
Section sec_9.2.1
Section sec_9.2.2
Section sec_9.2.3
Section sec_9.2.4
Section sec_9.2.5
Section sec_9.2.6
Section sec_9.2.7
Section sec_9.2.8
Section sec_9.2.9
Section sec_9.2.10
Section sec_9.3
Table tab_m
Figure fig_14
Section sec_9.4
Section sec_9.4.1
Section sec_9.4.2
Section sec_10
Section sec_11
Section sec_11.1
Section sec_11.2
Section sec_11.3
Section sec_11.4
Section sec_11.5
Section sec_11.5.1
Section sec_11.5.2
Section sec_11.5.2.1
Section sec_11.5.2.2
Table tab_n
Figure fig_15
Table tab_o
Figure fig_16
Table tab_p
Figure fig_17
Section sec_11.6
Section sec_11.6.1
Section sec_11.6.2
Section sec_11.6.3
Section sec_11.7
Section sec_11.7.1
Section sec_11.7.2
Section sec_12
Section sec_12.1
Section sec_13
Section sec_13.1
Section sec_14
Section sec_14.1
Section sec_14.2
Section sec_14.2.1
Section sec_14.2.1.1
Section sec_14.2.1.2
Section sec_14.2.1.3
Section sec_14.2.1.4
Section sec_14.2.1.5
Section sec_14.2.2
Section sec_14.2.2.1
Section sec_14.2.2.2
Section sec_14.2.3
Section sec_14.2.3.1
Section sec_14.2.3.1.1
Section sec_14.2.3.1.2
Section sec_14.2.3.1.3
Section sec_14.2.4
Section sec_15
Section sec_15.1
Annex sec_A
Table tab_A.1
Annex sec_A.1
Annex sec_A.2
Annex sec_A.3
Annex sec_A.4
Annex sec_A.5
Table tab_A.2
Annex sec_B
Annex sec_B.1
Annex sec_B.2
Annex sec_B.2.1
Annex sec_B.2.1.1
Annex sec_B.2.2
Annex sec_B.2.3
Annex sec_B.2.4
Annex sec_B.3
Annex sec_B.3.1
Annex sec_B.3.2
Annex sec_B.3.3
Annex sec_B.3.4
Annex sec_B.3.5
Annex sec_B.3.6
Annex sec_B.3.7
Annex sec_B.4
Annex sec_B.4.1
Annex sec_B.4.1.1
Annex sec_B.4.1.2
Annex sec_B.4.1.3
Annex sec_B.4.2
Annex sec_B.4.3
Table tab_B.1
Annex sec_B.5
Annex sec_B.5.1
Annex sec_B.5.2
Annex sec_B.5.3
Annex sec_B.5.4
Annex sec_C
Reference ref_1
Reference ref_2
Reference ref_3
Reference ref_4
Reference ref_5
Reference ref_6
Reference ref_7
Reference ref_8
Reference ref_9
Annex C (informative) Designation of Maintenance Agency
Bibliography
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Apparatus
5.1 Horizontal loading tests
5.2 Crushing tests
6 Preparation of tractor and ROPS for testing
7 Test procedures
7.1 Sequence of tests
7.2 Horizontal loading from rear, front and side
7.3 Crushing tests
7.4 Second longitudinal loading
8 Determination of seat index point (SIP), seat location and adjustment for test
8.1 Seat index point
8.2 Seat location and adjustment for test
9 Clearance zone
9.1 Determination of the clearance zone
9.2 Determination of the clearance zone for tractors with a non-reversible seat
9.3 Determination of the clearance zone for tractors with a reversible driver’s position
9.4 Optional seats
10 Tolerances
11 Acceptance conditions
11.1 General
11.2 Clearance zone
11.3 Recording permanent deflection
11.4 Required force
11.5 Overload test
11.6 Additional conditions
11.7 Cold weather embrittlement
12 Seatbelt anchorage performance
13 Labelling
14 Extension to other tractor models
14.1 Administrative extension
14.2 Technical extension
15 Test report
Annex A (normative) Optional requirements for providing resistance to brittle fracture of roll-over protective structure at reduced operating temperature
Annex B (normative) Test report for roll-over protective structure
Annex C (informative) Designation of Maintenance Agency
Bibliography