ISO 3365:2016
Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole — Dimensions
ISO 3365:2016 specifies the dimensions of indexable hardmetal (carbide) inserts with wiper edges, without fixing hole. These inserts are primarily intended to be mounted on milling cutters by top or wedge clamping.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$179.13 NZD
|
|
| HardCopy |
$214.78 NZD
|
|
| Networkable PDF |
Price varies
|
Foreword
1 Scope
2 Normative references
3 Types of inserts
4 Interchangeability
4.1 Tolerances
4.2 Dimensions m
5 Designation and marking
5.1 Designation
5.2 Marking
6 Measurement
7 Recommended dimensions
7.1 Triangular inserts
7.1.1 Symmetrical triangular inserts with 90° cutting edge angle, 11° normal clearance, and 11° wiper edge normal clearance
7.1.2 Asymmetrical triangular inserts with chamfered corners, 90° cutting edge angle, 11° normal clearance, and 15° wiper edge normal clearance
7.1.3 Asymmetrical triangular inserts with chamfered corners, 90° cutting edge angle, 20° normal clearance, and 20° wiper edge normal clearance
7.2 Square inserts
7.2.1 Symmetrical square inserts with chamfered corner, 75° cutting edge angle, 0° normal clearance, and 0° wiper edge normal clearance
7.2.2 Asymmetrical square inserts with chamfered corner, 75° cutting edge angle, 11° normal clearance, and 15° wiper edge normal clearance
7.2.3 Symmetrical square inserts with 45° cutting edge angle, 0° normal clearance, and 0° wiper edge normal clearance
7.2.4 Asymmetrical square inserts without chamfered corner, 75° cutting edge angle, 20° normal clearance, and 20° wiper edge normal clearance
Annex A (normative) Tolerances for d, m, and s
Annex B (normative) Method of measurement of “m” dimension
Annex C (normative) Range of sizes for inserts with wiper edges, without fixation hole
Annex D (informative) Relationship between designations in this International Standard and ISO 13399
Bibliography
Previous versions
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
Related Information
Similar Standards
-
BS 1296-1:1970
Specification for single point cutting tools, Shank sections
-
BS 1296-2:1972
Specification for single point cutting tools, Nomenclature
-
BS 1296-3:1978
Specification for single point cutting tools, Butt-welded cutting tools and blanks
-
BS 4193-22:1996
Hardmetal insert tooling, Classification and designation of approximate chip control zones for indexable inserts with chipbreakers
Foreword
1 Scope
2 Normative references
3 Types of inserts
4 Interchangeability
4.1 Tolerances
4.2 Dimensions m
5 Designation and marking
5.1 Designation
5.2 Marking
6 Measurement
7 Recommended dimensions
7.1 Triangular inserts
7.1.1 Symmetrical triangular inserts with 90° cutting edge angle, 11° normal clearance, and 11° wiper edge normal clearance
7.1.2 Asymmetrical triangular inserts with chamfered corners, 90° cutting edge angle, 11° normal clearance, and 15° wiper edge normal clearance
7.1.3 Asymmetrical triangular inserts with chamfered corners, 90° cutting edge angle, 20° normal clearance, and 20° wiper edge normal clearance
7.2 Square inserts
7.2.1 Symmetrical square inserts with chamfered corner, 75° cutting edge angle, 0° normal clearance, and 0° wiper edge normal clearance
7.2.2 Asymmetrical square inserts with chamfered corner, 75° cutting edge angle, 11° normal clearance, and 15° wiper edge normal clearance
7.2.3 Symmetrical square inserts with 45° cutting edge angle, 0° normal clearance, and 0° wiper edge normal clearance
7.2.4 Asymmetrical square inserts without chamfered corner, 75° cutting edge angle, 20° normal clearance, and 20° wiper edge normal clearance
Annex A (normative) Tolerances for d, m, and s
Annex B (normative) Method of measurement of “m” dimension
Annex C (normative) Range of sizes for inserts with wiper edges, without fixation hole
Annex D (informative) Relationship between designations in this International Standard and ISO 13399
Bibliography