ISO 2929:2014
Rubber hoses and hose assemblies for bulk fuel delivery by truck — Specification
ISO 2929:2014 specifies the requirements for two groups of rubber hoses and rubber hose assemblies for loading and discharge of liquid hydrocarbon fuels with a maximum working pressure of 10 bar (1,0 MPa).
Both groups of hoses are designed for:
a) use with hydrocarbon fuels having an aromatic-hydrocarbon content not exceeding 50 % by volume and containing up to 15 % of oxygenated compounds;
b) operation within the temperature range of − 30 °C to + 70 °C, undamaged by climatic conditions of − 50 °C to + 70 °C when stored in static conditions.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$118.26 NZD
|
|
| HardCopy |
$152.17 NZD
|
|
| Networkable PDF |
Price varies
|
Section sec_1
Section sec_2
Section sec_3
Section sec_4
Section sec_5
Section sec_6
Section sec_6.1
Table tab_1
Section sec_6.2
Section sec_6.3
Section sec_6.4
Section sec_7
Section sec_7.1
Table tab_2
Section sec_7.2
Table tab_3
Section sec_8
Section sec_8.1
Section sec_8.2
Section sec_8.3
Section sec_9
Section sec_10
Section sec_11
Section sec_11.1
Section sec_11.2
Annex sec_A
Annex sec_A.1
Annex sec_A.2
Annex sec_B
Table tab_B.1
Annex sec_C
Annex sec_C.1
Annex sec_C.2
Table tab_a
Figure fig_C.1
Annex sec_D
Annex sec_D.1
Annex sec_D.2
Annex sec_D.3
Annex sec_E
Table tab_E.1
Annex sec_F
Table tab_F.1
Reference ref_1
Bibliography
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Materials and construction
6 Dimensions
6.1 Nominal bore, internal diameter, outside diameter and their tolerances, service reeling diameter and minimum bend radius
6.2 Concentricity
6.3 Tolerance on length
6.4 Minimum thickness of lining and cover
7 Physical properties
7.1 Rubber compounds
7.2 Finished hoses and hose assemblies
8 Electrical resistance
8.1 General
8.2 M-grade
8.3 Ω-grade
9 Types of test
10 Design verification testing (type testing)
11 Marking
11.1 Hoses
11.2 Hose assemblies
Annex A (normative) Method of test for strength of adhesion between components
Annex B (normative) Method of test for flexibility at 20 °C
Annex C (normative) Method of test for flammability
Annex D (normative) Test method for security of coupling attachment
Annex E (normative) Tests to be carried out as part of design verification (type) and routine testing
Annex F (informative) Recommended tests for production acceptance testing
Bibliography
Previous versions
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
Related Information
Similar Standards
-
AS/NZS 1335:2020
Gas welding equipment - Rubber hoses for welding, cutting and allied processes -
AS/NZS 1596:2014
The storage and handling of LP Gas -
AS/NZS 1596:2014 A1
The storage and handling of LP Gas - Amendment 1:2018 -
AS/NZS 1596:2014 A2
The storage and handling of LP Gas
Section sec_1
Section sec_2
Section sec_3
Section sec_4
Section sec_5
Section sec_6
Section sec_6.1
Table tab_1
Section sec_6.2
Section sec_6.3
Section sec_6.4
Section sec_7
Section sec_7.1
Table tab_2
Section sec_7.2
Table tab_3
Section sec_8
Section sec_8.1
Section sec_8.2
Section sec_8.3
Section sec_9
Section sec_10
Section sec_11
Section sec_11.1
Section sec_11.2
Annex sec_A
Annex sec_A.1
Annex sec_A.2
Annex sec_B
Table tab_B.1
Annex sec_C
Annex sec_C.1
Annex sec_C.2
Table tab_a
Figure fig_C.1
Annex sec_D
Annex sec_D.1
Annex sec_D.2
Annex sec_D.3
Annex sec_E
Table tab_E.1
Annex sec_F
Table tab_F.1
Reference ref_1
Bibliography
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Materials and construction
6 Dimensions
6.1 Nominal bore, internal diameter, outside diameter and their tolerances, service reeling diameter and minimum bend radius
6.2 Concentricity
6.3 Tolerance on length
6.4 Minimum thickness of lining and cover
7 Physical properties
7.1 Rubber compounds
7.2 Finished hoses and hose assemblies
8 Electrical resistance
8.1 General
8.2 M-grade
8.3 Ω-grade
9 Types of test
10 Design verification testing (type testing)
11 Marking
11.1 Hoses
11.2 Hose assemblies
Annex A (normative) Method of test for strength of adhesion between components
Annex B (normative) Method of test for flexibility at 20 °C
Annex C (normative) Method of test for flammability
Annex D (normative) Test method for security of coupling attachment
Annex E (normative) Tests to be carried out as part of design verification (type) and routine testing
Annex F (informative) Recommended tests for production acceptance testing
Bibliography