ISO 20347:2012
Personal protective equipment — Occupational footwear
ISO 20347:2011 specifies basic and additional (optional) requirements for occupational footwear that is not exposed to any mechanical risks (impact or compression).
Special risks are covered by complementary job-related standards (e.g. footwear for firefighters, electrical insulating footwear, protection against chain saw injuries, protection against chemicals and against molten metal splash, protection for motor cycle riders).
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$118.26 NZD
|
|
| HardCopy |
$152.17 NZD
|
|
| Networkable PDF |
Price varies
|
1 Scope
2 Normative references
3 Terms and definitions
4 Classification and designs
5 Basic requirements for occupational footwear
5.1 General
5.2 Design
5.2.1 General
5.2.2 Height of upper
5.2.3 Seat region
5.3 Whole footwear
5.3.1 Sole performance
5.3.1.1 Construction
5.3.1.2 Upper/outsole bond strength
5.3.2 Leakproofness
5.3.3 Specific ergonomic features
5.3.4 Slip resistance requirement
5.3.4.1 General
5.3.4.2 Slip resistance on ceramic tile floor with sodium lauryl sulphate (SLS) solution
5.3.4.3 Slip resistance on steel floor with glycerine
5.3.4.4 Slip resistance on ceramic tile floor with SLS and on steel floor with glycerine
5.3.5 Innocuousness
5.4 Upper
5.4.1 General
5.4.2 Thickness
5.4.3 Tear strength
5.4.4 Tensile properties
5.4.5 Flexing resistance
5.4.6 Water vapour permeability and coefficient
5.4.7 pH value
5.4.8 Hydrolysis
5.4.9 Chromium VI content
5.5 Vamp and quarter lining
5.5.1 Tear strength
5.5.2 Abrasion resistance
5.5.3 Water vapour permeability and coefficient
5.5.4 pH value
5.5.5 Chromium VI content
5.6 Tongue
5.6.1 Tear strength
5.6.2 pH value
5.6.3 Chromium VI content
5.7 Insole and insock
5.7.1 Thickness
5.7.2 pH value
5.7.3 Water absorption and desorption
5.7.4 Abrasion resistance
5.7.4.1 Insoles
5.7.4.2 Insocks
5.7.5 Chromium VI content
5.8 Outsole
5.8.1 Design
5.8.1.1 Thickness
5.8.1.2 Cleated area
5.8.1.3 Cleat height
5.8.2 Tear strength
5.8.3 Abrasion resistance
5.8.4 Flexing resistance
5.8.5 Hydrolysis
5.8.6 Interlayer bond strength
6 Additional requirements for occupational footwear
6.1 General
6.2 Whole footwear
6.2.1 Penetration resistance
6.2.1.1 Determination of penetration force
6.2.1.1.1 Metallic anti-penetration insert
6.2.1.1.2 Non-metallic anti-penetration insert used as an insole
6.2.1.2 Construction
6.2.1.3 Dimensions
6.2.1.4 Flex resistance of penetration-resistant inserts
6.2.1.5 Behaviour of penetration-resistant inserts
6.2.1.5.1 Corrosion resistance of penetration-resistant metallic inserts
6.2.1.5.2 Penetration-resistant non-metallic inserts
6.2.2 Electrical properties
6.2.2.1 Conductive footwear
6.2.2.2 Antistatic footwear
6.2.2.3 Electrically insulating footwear
6.2.3 Resistance to inimical environments
6.2.3.1 Heat insulation of sole complex
6.2.3.2 Cold insulation of sole complex
6.2.4 Energy absorption of seat region
6.2.5 Water resistance
6.2.6 Ankle protection
6.2.7 Cut resistance footwear
6.2.7.1 Design
6.2.7.2 Construction
6.2.7.3 Resistance to cutting
6.2.7.4 Penetration resistance
6.3 Upper — Water penetration and absorption
6.4 Outsole
6.4.1 Resistance to hot contact
6.4.2 Resistance to fuel oil
7 Marking
8 Information to be supplied
8.1 General
8.2 Electrical properties
8.2.1 Conductive footwear
8.2.2 Antistatic footwear
8.3 Insocks
Previous versions
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
Related Information
Similar Standards
-
BS EN 13061:2009
Protective clothing. Shin guards for association football players. Requirements and test methods
-
BS EN 13277-7:2009
Protective equipment for martial arts, Additional requirements and test methods for hand and foot protectors
-
BS EN 13634:2017
Protective footwear for motorcycle riders. Requirements and test methods
-
BS EN 13634:2017 - TC
Tracked Changes. Protective footwear for motorcycle riders. Requirements and test methods
Related News
1 Scope
2 Normative references
3 Terms and definitions
4 Classification and designs
5 Basic requirements for occupational footwear
5.1 General
5.2 Design
5.2.1 General
5.2.2 Height of upper
5.2.3 Seat region
5.3 Whole footwear
5.3.1 Sole performance
5.3.1.1 Construction
5.3.1.2 Upper/outsole bond strength
5.3.2 Leakproofness
5.3.3 Specific ergonomic features
5.3.4 Slip resistance requirement
5.3.4.1 General
5.3.4.2 Slip resistance on ceramic tile floor with sodium lauryl sulphate (SLS) solution
5.3.4.3 Slip resistance on steel floor with glycerine
5.3.4.4 Slip resistance on ceramic tile floor with SLS and on steel floor with glycerine
5.3.5 Innocuousness
5.4 Upper
5.4.1 General
5.4.2 Thickness
5.4.3 Tear strength
5.4.4 Tensile properties
5.4.5 Flexing resistance
5.4.6 Water vapour permeability and coefficient
5.4.7 pH value
5.4.8 Hydrolysis
5.4.9 Chromium VI content
5.5 Vamp and quarter lining
5.5.1 Tear strength
5.5.2 Abrasion resistance
5.5.3 Water vapour permeability and coefficient
5.5.4 pH value
5.5.5 Chromium VI content
5.6 Tongue
5.6.1 Tear strength
5.6.2 pH value
5.6.3 Chromium VI content
5.7 Insole and insock
5.7.1 Thickness
5.7.2 pH value
5.7.3 Water absorption and desorption
5.7.4 Abrasion resistance
5.7.4.1 Insoles
5.7.4.2 Insocks
5.7.5 Chromium VI content
5.8 Outsole
5.8.1 Design
5.8.1.1 Thickness
5.8.1.2 Cleated area
5.8.1.3 Cleat height
5.8.2 Tear strength
5.8.3 Abrasion resistance
5.8.4 Flexing resistance
5.8.5 Hydrolysis
5.8.6 Interlayer bond strength
6 Additional requirements for occupational footwear
6.1 General
6.2 Whole footwear
6.2.1 Penetration resistance
6.2.1.1 Determination of penetration force
6.2.1.1.1 Metallic anti-penetration insert
6.2.1.1.2 Non-metallic anti-penetration insert used as an insole
6.2.1.2 Construction
6.2.1.3 Dimensions
6.2.1.4 Flex resistance of penetration-resistant inserts
6.2.1.5 Behaviour of penetration-resistant inserts
6.2.1.5.1 Corrosion resistance of penetration-resistant metallic inserts
6.2.1.5.2 Penetration-resistant non-metallic inserts
6.2.2 Electrical properties
6.2.2.1 Conductive footwear
6.2.2.2 Antistatic footwear
6.2.2.3 Electrically insulating footwear
6.2.3 Resistance to inimical environments
6.2.3.1 Heat insulation of sole complex
6.2.3.2 Cold insulation of sole complex
6.2.4 Energy absorption of seat region
6.2.5 Water resistance
6.2.6 Ankle protection
6.2.7 Cut resistance footwear
6.2.7.1 Design
6.2.7.2 Construction
6.2.7.3 Resistance to cutting
6.2.7.4 Penetration resistance
6.3 Upper — Water penetration and absorption
6.4 Outsole
6.4.1 Resistance to hot contact
6.4.2 Resistance to fuel oil
7 Marking
8 Information to be supplied
8.1 General
8.2 Electrical properties
8.2.1 Conductive footwear
8.2.2 Antistatic footwear
8.3 Insocks