ISO 15854:2023
Dentistry — Casting and baseplate waxes
This document specifies the classification of and requirements for waxes used for dental casting (including products intended for CAD/CAM milling) using the lost-wax technique and dental baseplate preparation together with the test methods to be employed to determine compliance with these requirements.
Solid polymer products (such as acrylics) for CAD/CAM work, and thermoplastic or photo-curing resins used in additive processes, are not covered by this document.
This document does not include specific and quantitative requirements for freedom from biological hazards.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$240.87 NZD
|
|
| HardCopy |
$277.39 NZD
|
|
| Networkable PDF |
Price varies
|
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Requirements
5.1 Appearance
5.2 Flow
5.3 Behaviour on trimming
5.4 Behaviour on softening — Type 1
5.5 Appearance after flaming
5.6 Behaviour on softening — Type 2
5.7 Residue on artificial teeth — Type 2
5.8 Behaviour of colouring material — Type 2
5.9 Adhesion on storage — Type 2
5.10 Residue on ignition — Type 1
5.11 Biocompatibility
6 Sampling
7 Test methods — General
7.1 Ambient temperature
7.2 Apparatus function verification
8 Test methods — Specific
8.1 Visual inspection
8.2 Flow
8.2.1 Principle
8.2.2 Apparatus
8.2.3 Preparation of test pieces
8.2.4 Procedure
8.2.5 Expression of results and evaluation
8.3 Behaviour on trimming test
8.3.1 Principle
8.3.2 Apparatus
8.3.3 Procedure
8.4 Behaviour on softening test — Type 1
8.4.1 Principle
8.4.2 Apparatus
8.4.3 Procedure
8.5 Appearance after flaming test
8.5.1 Principle
8.5.2 Procedure
8.6 Behaviour on softening test — Type 2
8.6.1 Principle
8.6.2 Apparatus
8.6.3 Procedure
8.7 Residue on artificial teeth and behaviour of wax colouring material test — Type 2
8.7.1 Principle
8.7.2 Apparatus
8.7.3 Procedure
8.8 Adhesion on storage test — Type 2
8.8.1 Principle
8.8.2 Apparatus
8.8.3 Procedure
8.9 Residue on ignition test— Type 1
8.9.1 Principle
8.9.2 Apparatus
8.9.3 Procedure
9 Marking and packaging
9.1 Marking
9.2 Packaging
10 Test report
Annex A (informative) Determination of the melting point of wax
Bibliography
Previous versions
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
Related Information
Similar Standards
-
BS 3507:1976
Specification. Orthodontic wire and tape and dental ligature wire
-
BS 3520:1962
Specification for dental wrought precious metal alloy wire
-
BS 3886:1965
Specification for dental impression compound
-
BS 4284:1981
Specification for dental impression pastes (zinc oxide type)
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Requirements
5.1 Appearance
5.2 Flow
5.3 Behaviour on trimming
5.4 Behaviour on softening — Type 1
5.5 Appearance after flaming
5.6 Behaviour on softening — Type 2
5.7 Residue on artificial teeth — Type 2
5.8 Behaviour of colouring material — Type 2
5.9 Adhesion on storage — Type 2
5.10 Residue on ignition — Type 1
5.11 Biocompatibility
6 Sampling
7 Test methods — General
7.1 Ambient temperature
7.2 Apparatus function verification
8 Test methods — Specific
8.1 Visual inspection
8.2 Flow
8.2.1 Principle
8.2.2 Apparatus
8.2.3 Preparation of test pieces
8.2.4 Procedure
8.2.5 Expression of results and evaluation
8.3 Behaviour on trimming test
8.3.1 Principle
8.3.2 Apparatus
8.3.3 Procedure
8.4 Behaviour on softening test — Type 1
8.4.1 Principle
8.4.2 Apparatus
8.4.3 Procedure
8.5 Appearance after flaming test
8.5.1 Principle
8.5.2 Procedure
8.6 Behaviour on softening test — Type 2
8.6.1 Principle
8.6.2 Apparatus
8.6.3 Procedure
8.7 Residue on artificial teeth and behaviour of wax colouring material test — Type 2
8.7.1 Principle
8.7.2 Apparatus
8.7.3 Procedure
8.8 Adhesion on storage test — Type 2
8.8.1 Principle
8.8.2 Apparatus
8.8.3 Procedure
8.9 Residue on ignition test— Type 1
8.9.1 Principle
8.9.2 Apparatus
8.9.3 Procedure
9 Marking and packaging
9.1 Marking
9.2 Packaging
10 Test report
Annex A (informative) Determination of the melting point of wax
Bibliography