ISO 1458:2002
Metallic coatings — Electrodeposited coatings of nickel
ISO 1458 specifies requirements for nickel electrodeposited coatings that are applied to iron and steel, to zinc alloys, to copper or copper alloys, and to aluminium and aluminium alloys to provide an attractive appearance and corrosion resistance. In addition, it specifies requirements for copper plus nickel coatings applied to iron and steel, and to zinc alloys. Coating designations that differ in thickness and type are specified and guidance is given in selecting the coating appropriate to the service conditions to which the coated product will be exposed.
ISO 1458 does not specify the surface condition required by the base metal prior to the coating process, and is not applicable to coatings on sheet strip or wire in the non-fabricated form nor to threaded fasteners or coil springs.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$118.26 NZD
|
|
| HardCopy |
$152.17 NZD
|
|
| Networkable PDF |
Price varies
|
TitlePage - Metallic coatings— Electrodeposited coatings of nickel
TableofContent - Contents Page
Foreword - Foreword
Introduction - Introduction
Scope - 1 Scope
NormativeReference - 2 Normative references
Clause1 - 4 Information to be supplied by the purchaser to the electroplater
Subclause2 - 4.1 Essential information
Subclause2 - 4.2 Additional information
Clause1 - 5 Service condition number
Clause1 - 6 Designation
Subclause2 - 6.1 General
Subclause2 - 6.2 Type of copper coating
Subclause2 - 6.3 Types of nickel coatings
Subclause2 - 6.4 Example of a designation
Clause1 - 7 Requirements
Subclause2 - 7.1 Appearance
Subclause2 - 7.2 Local thickness
Subclause2 - 7.3 Double- and triple-layer nickel coatings
Subclause2 - 7.4 Adhesion
Subclause2 - 7.5 Corrosion resistance in CASS and acetic acid salt spray
Subclause2 - 7.6 STEP test requirements
Subclause2 - 7.7 Ductility
Subclause2 - 7.8 Stress relief heat treatments before coating
Subclause2 - 7.9 Hydrogen embrittlement relief treatment
Clause1 - 8 Sampling
AnnexInformative - Examples of service conditions for which the various service condition numbers...
Clause1 - A.1 Service condition number3
Clause1 - A.2 Service condition number2
Clause1 - A.3 Service condition number1
AnnexNormative - Thickness test methods
Clause1 - B.1 General
Clause1 - B.2 Destructive
Subclause2 - B.2.1 Microscopical method
Subclause2 - B.2.2 Coulometric method
Subclause2 - B.2.3 Scanning electron microscope method
Subclause2 - B.2.4 STEP Test
Clause1 - B.3 Non-destructive
Subclause2 - B.3.1 Magnetic method
Subclause2 - B.3.2 Beta backscatter method
Subclause2 - B.3.3 X-ray spectrometry
AnnexNormative - Ductility test
Clause1 - C.1 Scope
Clause1 - C.2 Principle
Clause1 - C.3 Apparatus
UntitledSubclause2 - C.3.1 Mandrel
Clause1 - C.4 Preparation of test piece
Clause1 - C.5 Procedure
Clause1 - C.6 Expression of results
AnnexNormative - Determination of the sulfur content of electrodeposited nickel coatings
Clause1 - D.1 Determination by combustion and iodate titrimetry
Clause1 - D.2 Determination by sulfide formation and iodate titrimetry
Bibliography - Bibliography
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
Related Information
Similar Standards
-
AS/NZS 1214:2016
Hot-dip galvanized coatings on threaded fasteners (ISO metric coarse thread series) -
AS/NZS 1789:2023
Metallic and other inorganic coatings — Electroplated coatings of zinc with supplementary treatments on iron or steel (ISO 2081:2018, MOD)
-
AS/NZS 4534:2006
Zinc and zinc/aluminium-alloy coatings on steel wire
-
AS/NZS 4680:2006
Hot-dip galvanized (zinc) coatings on fabricated ferrous articles
TitlePage - Metallic coatings— Electrodeposited coatings of nickel
TableofContent - Contents Page
Foreword - Foreword
Introduction - Introduction
Scope - 1 Scope
NormativeReference - 2 Normative references
Clause1 - 4 Information to be supplied by the purchaser to the electroplater
Subclause2 - 4.1 Essential information
Subclause2 - 4.2 Additional information
Clause1 - 5 Service condition number
Clause1 - 6 Designation
Subclause2 - 6.1 General
Subclause2 - 6.2 Type of copper coating
Subclause2 - 6.3 Types of nickel coatings
Subclause2 - 6.4 Example of a designation
Clause1 - 7 Requirements
Subclause2 - 7.1 Appearance
Subclause2 - 7.2 Local thickness
Subclause2 - 7.3 Double- and triple-layer nickel coatings
Subclause2 - 7.4 Adhesion
Subclause2 - 7.5 Corrosion resistance in CASS and acetic acid salt spray
Subclause2 - 7.6 STEP test requirements
Subclause2 - 7.7 Ductility
Subclause2 - 7.8 Stress relief heat treatments before coating
Subclause2 - 7.9 Hydrogen embrittlement relief treatment
Clause1 - 8 Sampling
AnnexInformative - Examples of service conditions for which the various service condition numbers...
Clause1 - A.1 Service condition number3
Clause1 - A.2 Service condition number2
Clause1 - A.3 Service condition number1
AnnexNormative - Thickness test methods
Clause1 - B.1 General
Clause1 - B.2 Destructive
Subclause2 - B.2.1 Microscopical method
Subclause2 - B.2.2 Coulometric method
Subclause2 - B.2.3 Scanning electron microscope method
Subclause2 - B.2.4 STEP Test
Clause1 - B.3 Non-destructive
Subclause2 - B.3.1 Magnetic method
Subclause2 - B.3.2 Beta backscatter method
Subclause2 - B.3.3 X-ray spectrometry
AnnexNormative - Ductility test
Clause1 - C.1 Scope
Clause1 - C.2 Principle
Clause1 - C.3 Apparatus
UntitledSubclause2 - C.3.1 Mandrel
Clause1 - C.4 Preparation of test piece
Clause1 - C.5 Procedure
Clause1 - C.6 Expression of results
AnnexNormative - Determination of the sulfur content of electrodeposited nickel coatings
Clause1 - D.1 Determination by combustion and iodate titrimetry
Clause1 - D.2 Determination by sulfide formation and iodate titrimetry
Bibliography - Bibliography