AS/NZS IEC 62386.305:2024
Digital addressable lighting interface, Part 305: Particular requirements – Input devices – Colour sensor
Standard adopts and modifies IEC 62386 305:2023 which specifies particular requirements for input devices that provide the lighting control system with colour information by colour sensing.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$132.30 NZD
|
|
| HardCopy |
$147.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 62386.305:2024 Digital addressable lighting interface Particular requirements - Input devices - Colour sensor (IEC 62386-305:2023 (ED.1.0), MOD)
Preface
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 General
4.1 General requirements
4.2 Version number
4.3 Insulation
5 Electrical specification
6 Bus power supply
7 Transmission protocol structure
8 Timing
9 Method of operation
9.1 General
9.2 Instance type
9.3 Input signal and value
9.3.1 General
9.3.2 Input value encoding
9.4 Events
9.4.1 Priority use
9.4.2 Bus usage
9.4.3 Encoding
9.4.4 Event configuration
9.4.5 Event generation
9.5 Configuring the input device
9.5.1 Using the report timer
9.5.2 Using the deadtime timer
9.5.3 Setting the timers
9.5.4 Setting the hysteresis
9.5.5 Manual configuration
9.6 Exception handling
9.6.1 Physical sensor failure
9.6.2 Manufacturer-specific errors
9.6.3 Error value
10 Declaration of variables
11 Definition of commands
11.1 General
11.2 Overview sheets
11.2.1 General
11.2.2 Standard commands
11.3 Event messages
11.3.1 INPUT NOTIFICATION (device/instance, event)
11.3.2 POWER NOTIFICATION (device)
11.4 Device control instructions
11.5 Device configuration instructions
11.6 Device queries
11.7 Instance control instructions
11.8 Instance configuration instructions
11.8.1 General
11.8.2 SET EVENT FILTER (DTR0)
11.8.3 SET REPORT TIMER (DTR0)
11.8.4 SET HYSTERESIS (DTR0)
11.8.5 SET DEADTIME TIMER (DTR0)
11.8.6 SET HYSTERESIS MIN (DTR0)
11.9 Instance queries
11.9.1 General
11.9.2 QUERY COLOUR SENSOR (DTR0)
11.9.3 QUERY DEADTIME TIMER
11.9.4 QUERY INSTANCE ERROR
11.9.5 QUERY REPORT TIMER
11.9.6 QUERY HYSTERESIS
11.9.7 QUERY HYSTERESIS MIN
11.10 Special commands
Annex A (informative) Explanation of radiometric parameters of colour sensors
Bibliography
Appendix ZZ (normative) Modifications to IEC 62386‑305:2023 for Australia and New Zealand
Figure 1 — IEC 62386 graphical overview
Figure A.1 — Example sensor sensitivity
Table 1 — Input value encoding
Table 2 — Colour value events
Table 3 — Colour report
Table 4 — Event filter
Table 5 — Event timer setting
Table 6 — "manualCapabilityInstance3xx" values
Table 7 — "instanceErrorByte" values
Table 8 — Declaration of device variables
Table 9 — Restrictions to instance variables defined in IEC 62386-103:2022
Table 10 — Declaration of instance variables
Table 11 — Standard commands
Table 12 — DTR reference
Table A.1 — Example answers to QUERY COLOUR SENSOR (DTR0)
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
Related Information
Similar Standards
-
AS/NZS 4782.2:2004
Double-capped fluorescent lamps - Performance specifications - Minimum Energy Performance Standard (MEPS)
-
AS/NZS 4782.2:2004 A1
Double-capped fluorescent lamps - Performance specifications - Minimum Energy Performance Standard (MEPS): Amendment 1
-
AS/NZS 4782.2:2004 A2
Double-capped fluorescent lamps - Performance specifications - Minimum Energy Performance Standard (MEPS): Amendment 2
-
AS/NZS 5341:2021
LED lamps – Test methods – Energy and functional performance
AS/NZS 62386.305:2024 Digital addressable lighting interface Particular requirements - Input devices - Colour sensor (IEC 62386-305:2023 (ED.1.0), MOD)
Preface
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 General
4.1 General requirements
4.2 Version number
4.3 Insulation
5 Electrical specification
6 Bus power supply
7 Transmission protocol structure
8 Timing
9 Method of operation
9.1 General
9.2 Instance type
9.3 Input signal and value
9.3.1 General
9.3.2 Input value encoding
9.4 Events
9.4.1 Priority use
9.4.2 Bus usage
9.4.3 Encoding
9.4.4 Event configuration
9.4.5 Event generation
9.5 Configuring the input device
9.5.1 Using the report timer
9.5.2 Using the deadtime timer
9.5.3 Setting the timers
9.5.4 Setting the hysteresis
9.5.5 Manual configuration
9.6 Exception handling
9.6.1 Physical sensor failure
9.6.2 Manufacturer-specific errors
9.6.3 Error value
10 Declaration of variables
11 Definition of commands
11.1 General
11.2 Overview sheets
11.2.1 General
11.2.2 Standard commands
11.3 Event messages
11.3.1 INPUT NOTIFICATION (device/instance, event)
11.3.2 POWER NOTIFICATION (device)
11.4 Device control instructions
11.5 Device configuration instructions
11.6 Device queries
11.7 Instance control instructions
11.8 Instance configuration instructions
11.8.1 General
11.8.2 SET EVENT FILTER (DTR0)
11.8.3 SET REPORT TIMER (DTR0)
11.8.4 SET HYSTERESIS (DTR0)
11.8.5 SET DEADTIME TIMER (DTR0)
11.8.6 SET HYSTERESIS MIN (DTR0)
11.9 Instance queries
11.9.1 General
11.9.2 QUERY COLOUR SENSOR (DTR0)
11.9.3 QUERY DEADTIME TIMER
11.9.4 QUERY INSTANCE ERROR
11.9.5 QUERY REPORT TIMER
11.9.6 QUERY HYSTERESIS
11.9.7 QUERY HYSTERESIS MIN
11.10 Special commands
Annex A (informative) Explanation of radiometric parameters of colour sensors
Bibliography
Appendix ZZ (normative) Modifications to IEC 62386‑305:2023 for Australia and New Zealand
Figure 1 — IEC 62386 graphical overview
Figure A.1 — Example sensor sensitivity
Table 1 — Input value encoding
Table 2 — Colour value events
Table 3 — Colour report
Table 4 — Event filter
Table 5 — Event timer setting
Table 6 — "manualCapabilityInstance3xx" values
Table 7 — "instanceErrorByte" values
Table 8 — Declaration of device variables
Table 9 — Restrictions to instance variables defined in IEC 62386-103:2022
Table 10 — Declaration of instance variables
Table 11 — Standard commands
Table 12 — DTR reference
Table A.1 — Example answers to QUERY COLOUR SENSOR (DTR0)
AS/NZS IEC 62386.305:2024
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.