AS/NZS ETSI EN 302 885:2018
Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class H DSC
Specifies the minimum technical characteristics and methods of measurement required for portable very high frequency (VHF) radiotelephones with integrated handheld class H DSC operating in certain frequency bands allocated to the maritime mobile service using either 25 kHz channels or 25 kHz and 12.5 kHz channels. This standard does not cover requirements for the integrated GNSS receiver providing locating function. This standard is identical with, and reproduced from, ETSI EN 302 885 V2.2.2 (2017-03).
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$147.60 NZD
|
|
| HardCopy |
$164.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS ETSI EN 302 885:2018 Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class H DSC
Intellectual Property Rights
Foreword
Modal verbs terminology
1 Scope
2 References
2.1 Normative references
2.2 Informative references
3 Definitions, symbols and abbreviations
3.1 Definitions
3.2 Symbols
3.3 Abbreviations
4 General and operational requirements
4.0 Conformance
4.1 Construction
4.2 Controls and indicators
4.3 Microphone and loudspeaker
4.4 Safety precautions
4.5 Labelling
5 Technical requirements
5.0 Conformance
5.1 Switching time
5.2 Class of emission and modulation characteristics
5.3 Battery capacity
5.4 DSC functionality
6 General conditions of measurement
6.1 Arrangements for RF connections to the equipment
6.1.1 RF connections to integral antenna equipment
6.1.2 RF connection to equipment with a detachable antenna
6.2 Arrangements for test signals applied to the receiver input
6.3 Squelch
6.4 Normal test modulation
6.5 Artificial antenna
6.6 Arrangements for test signals applied to the transmitter input
6.7 Test channels
6.8 Test conditions, power sources and ambient temperatures
6.8.1 Normal and extreme test conditions
6.8.2 Test power source
6.9 Normal test conditions
6.9.1 Normal temperature and humidity
6.9.2 Normal power sources
6.9.2.1 Battery power source
6.9.2.2 Other power sources
6.10 Extreme test conditions
6.10.0 General
6.10.1 Extreme temperatures
6.10.2 Extreme values of test power sources
6.10.2.1 Battery power source
6.10.2.2 Other power sources
6.11 Procedure for tests at extreme temperatures
6.12 Reference Bandwidths for emission measurements
7 Environmental tests
7.1 Procedure
7.2 Performance check
7.3 Drop test
7.3.1 Definition
7.3.2 Method of measurement
7.3.3 Requirement
7.4 Temperature tests
7.4.1 Definition
7.4.2 Dry heat
7.4.2.1 Definition
7.4.2.2 Method of measurement
7.4.2.3 Requirement
7.4.3 Damp heat
7.4.3.1 Definition
7.4.3.2 Method of measurement
7.4.3.3 Requirement
7.4.4 Low temperature cycle
7.4.4.1 Definition
7.4.4.2 Method of measurement
7.4.4.3 Requirement
8 Transmitter
8.0 General
8.1 Frequency error
8.1.1 Definition
8.1.2 Method of measurement
8.1.3 Limits
8.2 Carrier power
8.2.1 Definitions
8.2.2 Method of measurement
8.2.3 Limits, Normal and extreme test conditions
8.3 Frequency deviation
8.3.1 Definition
8.3.2 Maximum permissible frequency deviation
8.3.2.1 Method of measurement
8.3.2.2 Limits
8.3.3 Reduction of frequency deviation at modulation frequencies above 3 kHz
8.3.3.1 Method of measurement
8.3.3.2 Limits
8.4 Sensitivity of the modulator, including microphone
8.4.1 Definition
8.4.2 Method of measurement
8.4.3 Limits
8.5 Audio frequency response
8.5.1 Definition
8.5.2 Method of measurement
8.5.3 Limit
8.6 Audio frequency harmonic distortion of the emission
8.6.1 Definition
8.6.2 Method of measurement
8.6.2.0 General
8.6.2.1 Normal test conditions
8.6.2.2 Extreme test conditions
8.6.3 Limits
8.7 Adjacent channel power
8.7.1 Definition
8.7.2 Method of measurement
8.7.3 Limits
8.8 Conducted spurious emissions conveyed to the antenna
8.8.1 Definition
8.8.2 Method of measurement
8.8.3 Limit
8.9 Cabinet radiation and conducted spurious emissions other than those conveyed to the antenna
8.9.1 Definitions
8.9.2 Method of measurement
8.9.3 Limits
8.10 Residual modulation of the transmitter
8.10.1 Definition
8.10.2 Method of measurement
8.10.3 Limit
8.11 Transient frequency behaviour of the transmitter
8.11.1 Definitions
8.11.2 Method of measurement
8.11.3 Limits
8.12 Frequency error (demodulated DSC signal)
8.12.1 Definition
8.12.2 Method of measurement
8.12.3 Limits
8.13 Modulation index for DSC
8.13.1 Definition
8.13.2 Method of measurement
8.13.3 Limits
8.14 Modulation rate for DSC
8.14.1 Definition
8.14.2 Method of measurement
8.14.3 Limits
8.15 Testing of free channel transmission on DSC channel 70
8.15.1 Definition
8.15.2 Method of measurement
8.15.3 Requirement
9 Receiver
9.1 Harmonic distortion and rated audio frequency output power
9.1.1 Definition
9.1.2 Methods of measurement
9.1.3 Limits
9.2 Audio frequency response
9.2.1 Definition
9.2.2 Method of measurement
9.2.3 Limits
9.3 Maximum usable sensitivity
9.3.1 Definition
9.3.2 Method of measurement
9.3.3 Limits
9.4 Co-channel rejection
9.4.1 Definition
9.4.2 Method of measurement
9.4.3 Limit
9.5 Adjacent channel selectivity
9.5.1 Definition
9.5.2 Method of measurement
9.5.3 Limits
9.6 Spurious response rejection
9.6.1 Definition
9.6.2 Method of measurement
9.6.3 Limit
9.7 Intermodulation response
9.7.1 Definition
9.7.2 Method of measurement
9.7.3 Limit
9.8 Blocking or desensitization
9.8.1 Definition
9.8.2 Method of measurement
9.8.3 Limit
9.9 Conducted spurious emissions
9.9.1 Definition
9.9.2 Method of measurement
9.9.3 Limit
9.10 Radiated spurious emissions
9.10.1 Definition
9.10.2 Method of measurements
9.10.3 Limit
9.11 Receiver noise and hum level
9.11.1 Definition
9.11.2 Method of measurement
9.11.3 Limit
9.12 Squelch operation
9.12.1 Definition
9.12.2 Method of measurement
9.12.3 Limits
9.13 Squelch hysteresis
9.13.1 Definition
9.13.2 Method of measurement
9.13.3 Limit
10 DSC Signalling
10.1 Test Method
10.2 Display
10.3 GNSS receiver
10.4 Individual DSC calls
10.5 All ships calls
10.6 DSC call functionality
10.7 DSC message composition
10.8 Prioritized wait
10.9 Alarms
10.10 Standby
10.11 GNSS fix - sending distress
10.12 Tasks - sending distress
10.13 Display - sending distress
10.14 Distress button sub procedure
10.15 Void
10.16 Updating position
10.17 Handling received DSC messages - sending distress
10.18 Alarms - sending distress
10.19 Determining subsequent communications - sending distress
10.20 Automated tuning - sending distress
10.21 Cancelling the distress alert
10.22 Acknowledgements - sending distress
10.23 Termination - sending distress
10.24 Warnings - sending distress
10.25 Tasks - receiving distress
10.26 Display - receiving distress
10.27 Handling received DSC messages - receiving distress
10.28 Alarms - receiving distress
10.29 Determining subsequent communications - receiving distress
10.30 Automated tuning - receiving distress
10.31 Acknowledgements - receiving distress
10.32 Termination - receiving distress
10.33 Warnings - receiving distress
10.34 Tasks - sending non distress
10.35 Display - sending non distress
10.36 Handling received DSC messages - sending non distress
10.37 Alarms - sending non distress
10.38 Automated tuning - sending non distress
10.39 Delayed acknowledgements - sending non distress
10.40 Termination - sending non distress
10.41 Warnings - sending non distress
10.42 Tasks - receiving non distress
10.43 Display - receiving non distress
10.44 Handling received DSC messages - receiving non distress
10.45 Alarms - receiving non distress
10.46 Automated tuning - receiving non distress
10.47 Acknowledgements - receiving non distress
10.48 Termination - receiving non distress
10.49 Warnings - receiving non distress
10.50 Communication automated procedure
10.51 Tasks - communication
10.52 Display - communication
10.53 Handling received DSC messages - communication
10.54 Tuning of the receiver and transmitter - communication
10.55 Termination - communication
10.56 Tasks of handling incoming calls while engaged
10.57 Termination of automated procedures
10.58 Actions after termination of an automated procedure
10.59 Putting automated procedures on hold
10.60 Controlling non-terminated automated procedures on hold
11 Testing for compliance with technical requirements
11.1 Environmental conditions for testing
11.2 Interpretation of the measurement results
Annex A (informative): Relationship between the present document and the essential requirements of Directive 2014/53/EU
Annex B (normative): Measuring receiver for adjacent channel power measurement
B.1 Power measuring receiver specification
B.1.0 General
B.1.1 IF filter
B.1.2 Attenuation indicator
B.1.3 Rms value indicator
B.1.4 Oscillator and amplifier
Annex C (informative): DSC test calls
C.1 Interoperability tests
Annex D (informative): Change history
History
Previous versions
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
Related Information
Radiocommunications Regulations (Radio Standards) Notice 2020 - Revoked
Ministry: Ministry of Business Innovation and Employment - Digital, Communications and Transformation (RSM)
Section: Table 1
Citation context:Listed as a standard applicable to VHF maritime mobile portable DSC class H (156-174 MHz), compliance meets A2 level of conformity.
Radiocommunications Regulations (Radio Standards) Notice 2023
Ministry: Ministry of Business Innovation and Employment - Digital, Communications and Transformation (RSM)
Section: Table 3
Citation context:Listed as a standard applicable to Maritime, Aeronautical and Safety Services, compliance meets A2 level of conformity.
Similar Standards
-
AS/NZS ETSI EN 301 025:2018
VHF radiotelephone equipment for general communications and associated equipment for Class ‘D’ Digital Selective Calling (DSC) -
AS/NZS ETSI EN 301 178:2018
Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands (for non-GMDSS applications only) -
BS EN 62388:2013
Maritime navigation and radiocommunication equipment and systems. Shipborne radar. Performance requirements, methods of testing and required test results
-
BS IEC 61108-6:2023
Maritime navigation and radiocommunication equipment and systems. Global navigation satellite systems (GNSS), Navigation with Indian constellation (NavIC)/Indian regional navigation satellite system (IRNSS). Receiver equipment. Performance requirements, m
AS/NZS ETSI EN 302 885:2018 Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class H DSC
Intellectual Property Rights
Foreword
Modal verbs terminology
1 Scope
2 References
2.1 Normative references
2.2 Informative references
3 Definitions, symbols and abbreviations
3.1 Definitions
3.2 Symbols
3.3 Abbreviations
4 General and operational requirements
4.0 Conformance
4.1 Construction
4.2 Controls and indicators
4.3 Microphone and loudspeaker
4.4 Safety precautions
4.5 Labelling
5 Technical requirements
5.0 Conformance
5.1 Switching time
5.2 Class of emission and modulation characteristics
5.3 Battery capacity
5.4 DSC functionality
6 General conditions of measurement
6.1 Arrangements for RF connections to the equipment
6.1.1 RF connections to integral antenna equipment
6.1.2 RF connection to equipment with a detachable antenna
6.2 Arrangements for test signals applied to the receiver input
6.3 Squelch
6.4 Normal test modulation
6.5 Artificial antenna
6.6 Arrangements for test signals applied to the transmitter input
6.7 Test channels
6.8 Test conditions, power sources and ambient temperatures
6.8.1 Normal and extreme test conditions
6.8.2 Test power source
6.9 Normal test conditions
6.9.1 Normal temperature and humidity
6.9.2 Normal power sources
6.9.2.1 Battery power source
6.9.2.2 Other power sources
6.10 Extreme test conditions
6.10.0 General
6.10.1 Extreme temperatures
6.10.2 Extreme values of test power sources
6.10.2.1 Battery power source
6.10.2.2 Other power sources
6.11 Procedure for tests at extreme temperatures
6.12 Reference Bandwidths for emission measurements
7 Environmental tests
7.1 Procedure
7.2 Performance check
7.3 Drop test
7.3.1 Definition
7.3.2 Method of measurement
7.3.3 Requirement
7.4 Temperature tests
7.4.1 Definition
7.4.2 Dry heat
7.4.2.1 Definition
7.4.2.2 Method of measurement
7.4.2.3 Requirement
7.4.3 Damp heat
7.4.3.1 Definition
7.4.3.2 Method of measurement
7.4.3.3 Requirement
7.4.4 Low temperature cycle
7.4.4.1 Definition
7.4.4.2 Method of measurement
7.4.4.3 Requirement
8 Transmitter
8.0 General
8.1 Frequency error
8.1.1 Definition
8.1.2 Method of measurement
8.1.3 Limits
8.2 Carrier power
8.2.1 Definitions
8.2.2 Method of measurement
8.2.3 Limits, Normal and extreme test conditions
8.3 Frequency deviation
8.3.1 Definition
8.3.2 Maximum permissible frequency deviation
8.3.2.1 Method of measurement
8.3.2.2 Limits
8.3.3 Reduction of frequency deviation at modulation frequencies above 3 kHz
8.3.3.1 Method of measurement
8.3.3.2 Limits
8.4 Sensitivity of the modulator, including microphone
8.4.1 Definition
8.4.2 Method of measurement
8.4.3 Limits
8.5 Audio frequency response
8.5.1 Definition
8.5.2 Method of measurement
8.5.3 Limit
8.6 Audio frequency harmonic distortion of the emission
8.6.1 Definition
8.6.2 Method of measurement
8.6.2.0 General
8.6.2.1 Normal test conditions
8.6.2.2 Extreme test conditions
8.6.3 Limits
8.7 Adjacent channel power
8.7.1 Definition
8.7.2 Method of measurement
8.7.3 Limits
8.8 Conducted spurious emissions conveyed to the antenna
8.8.1 Definition
8.8.2 Method of measurement
8.8.3 Limit
8.9 Cabinet radiation and conducted spurious emissions other than those conveyed to the antenna
8.9.1 Definitions
8.9.2 Method of measurement
8.9.3 Limits
8.10 Residual modulation of the transmitter
8.10.1 Definition
8.10.2 Method of measurement
8.10.3 Limit
8.11 Transient frequency behaviour of the transmitter
8.11.1 Definitions
8.11.2 Method of measurement
8.11.3 Limits
8.12 Frequency error (demodulated DSC signal)
8.12.1 Definition
8.12.2 Method of measurement
8.12.3 Limits
8.13 Modulation index for DSC
8.13.1 Definition
8.13.2 Method of measurement
8.13.3 Limits
8.14 Modulation rate for DSC
8.14.1 Definition
8.14.2 Method of measurement
8.14.3 Limits
8.15 Testing of free channel transmission on DSC channel 70
8.15.1 Definition
8.15.2 Method of measurement
8.15.3 Requirement
9 Receiver
9.1 Harmonic distortion and rated audio frequency output power
9.1.1 Definition
9.1.2 Methods of measurement
9.1.3 Limits
9.2 Audio frequency response
9.2.1 Definition
9.2.2 Method of measurement
9.2.3 Limits
9.3 Maximum usable sensitivity
9.3.1 Definition
9.3.2 Method of measurement
9.3.3 Limits
9.4 Co-channel rejection
9.4.1 Definition
9.4.2 Method of measurement
9.4.3 Limit
9.5 Adjacent channel selectivity
9.5.1 Definition
9.5.2 Method of measurement
9.5.3 Limits
9.6 Spurious response rejection
9.6.1 Definition
9.6.2 Method of measurement
9.6.3 Limit
9.7 Intermodulation response
9.7.1 Definition
9.7.2 Method of measurement
9.7.3 Limit
9.8 Blocking or desensitization
9.8.1 Definition
9.8.2 Method of measurement
9.8.3 Limit
9.9 Conducted spurious emissions
9.9.1 Definition
9.9.2 Method of measurement
9.9.3 Limit
9.10 Radiated spurious emissions
9.10.1 Definition
9.10.2 Method of measurements
9.10.3 Limit
9.11 Receiver noise and hum level
9.11.1 Definition
9.11.2 Method of measurement
9.11.3 Limit
9.12 Squelch operation
9.12.1 Definition
9.12.2 Method of measurement
9.12.3 Limits
9.13 Squelch hysteresis
9.13.1 Definition
9.13.2 Method of measurement
9.13.3 Limit
10 DSC Signalling
10.1 Test Method
10.2 Display
10.3 GNSS receiver
10.4 Individual DSC calls
10.5 All ships calls
10.6 DSC call functionality
10.7 DSC message composition
10.8 Prioritized wait
10.9 Alarms
10.10 Standby
10.11 GNSS fix - sending distress
10.12 Tasks - sending distress
10.13 Display - sending distress
10.14 Distress button sub procedure
10.15 Void
10.16 Updating position
10.17 Handling received DSC messages - sending distress
10.18 Alarms - sending distress
10.19 Determining subsequent communications - sending distress
10.20 Automated tuning - sending distress
10.21 Cancelling the distress alert
10.22 Acknowledgements - sending distress
10.23 Termination - sending distress
10.24 Warnings - sending distress
10.25 Tasks - receiving distress
10.26 Display - receiving distress
10.27 Handling received DSC messages - receiving distress
10.28 Alarms - receiving distress
10.29 Determining subsequent communications - receiving distress
10.30 Automated tuning - receiving distress
10.31 Acknowledgements - receiving distress
10.32 Termination - receiving distress
10.33 Warnings - receiving distress
10.34 Tasks - sending non distress
10.35 Display - sending non distress
10.36 Handling received DSC messages - sending non distress
10.37 Alarms - sending non distress
10.38 Automated tuning - sending non distress
10.39 Delayed acknowledgements - sending non distress
10.40 Termination - sending non distress
10.41 Warnings - sending non distress
10.42 Tasks - receiving non distress
10.43 Display - receiving non distress
10.44 Handling received DSC messages - receiving non distress
10.45 Alarms - receiving non distress
10.46 Automated tuning - receiving non distress
10.47 Acknowledgements - receiving non distress
10.48 Termination - receiving non distress
10.49 Warnings - receiving non distress
10.50 Communication automated procedure
10.51 Tasks - communication
10.52 Display - communication
10.53 Handling received DSC messages - communication
10.54 Tuning of the receiver and transmitter - communication
10.55 Termination - communication
10.56 Tasks of handling incoming calls while engaged
10.57 Termination of automated procedures
10.58 Actions after termination of an automated procedure
10.59 Putting automated procedures on hold
10.60 Controlling non-terminated automated procedures on hold
11 Testing for compliance with technical requirements
11.1 Environmental conditions for testing
11.2 Interpretation of the measurement results
Annex A (informative): Relationship between the present document and the essential requirements of Directive 2014/53/EU
Annex B (normative): Measuring receiver for adjacent channel power measurement
B.1 Power measuring receiver specification
B.1.0 General
B.1.1 IF filter
B.1.2 Attenuation indicator
B.1.3 Rms value indicator
B.1.4 Oscillator and amplifier
Annex C (informative): DSC test calls
C.1 Interoperability tests
Annex D (informative): Change history
History
Previous versions
AS/NZS ETSI EN 302 885:2018
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.