AS/NZS 61386.21:2015
Conduit systems for cable management - Part 21: Particular requirements - Rigid conduit systems
Specifies the requirements for rigid conduit systems and smooth bore profile wall conduit systems. This standard is based on but not equivalent to IEC 61386-21, Ed.1.0 (2002).
Note: this standard supersedes AS/NZS 2053.2:2001, AS/NZS 2053.6:2001, and AS/NZS 2053.7:2002 that are subsequently withdrawn.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$132.30 NZD
|
|
| HardCopy |
$147.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 61386.21:2015 Conduit systems for cable management Particular requirements - Rigid conduit systems
Preface
1 Scope
2 Normative references
3 Definitions
4 General requirements
5 General conditions for tests
6 Classification
6.1.201 Rigid conduit and fittings of insulating material
7 Marking and documentation
7.1.201 Marking
7.1.202 Documentation
7.1.203 Marking for non-metallic conduit and fittings other than smooth bore profile wall conduit
7.1.204 Marking for metallic conduit
7.1.205 Marking for smooth bore profile wall conduit
7.1.206 Marking for flame propagating conduit
7.2.201 Marking for metallic fittings
7.2.202 Instructions for jointing of conduit in non-threadable fittings
7.2.203 Instructions for adhesives or sealants for non-threadable fittings
8 Dimensions
8.201 Non-metallic conduit
8.201.1 Diameter
8.201.2 Length of conduit
8.201.3 Conduit ends
8.202 Fittings
8.202.1 Wall thickness and fixing holes
8.202.2 Conduit entries
8.203 Metallic conduits
8.203.1 Outside diameter
8.203.2 Wall thickness
8.203.3 Threads
8.204 Metallic fittings
8.204.1 Outside diameter of threaded fittings
8.204.2 Wall thickness of threaded fittings
8.204.3 Threads
8.204.4 Dimensions of non-threadable fittings
8.205 Inside and outside diameters of smooth bore profile wall conduits
8.205.1 General
8.205.2 Length of conduits
8.205.3 Conduit spigot ends
8.205.4 Socket dimensions
8.205.5 Socket concentricity and squareness
9 Construction
9.201 Joining
10 Mechanical properties
10.4 Bending test
10.4.201 Criteria
10.4.202 Metallic conduits
10.4.203 Non-metallic conduits
10.4.204 Composite conduits
10.5 Flexing test
10.6 Collapse test
10.6.201 Metallic conduits
10.6.202 Composite conduits
10.6.203 Smooth bore profile wall conduits
10.6.204 Non-metallic conduits
10.7 Pull out strength of joints
10.201 Pipe stiffness test
10.201.1 Conduits < 100 mm nominal diameter
10.201.2 Conduits ≥ 100 mm nominal diameter
11 Electrical properties
12 Thermal properties
12.3 Satisfied test
13 Fire hazard
13.201 Non-flame propagating
14 External influences
14.201 Corrosive and polluting substances
15 Electromagnetic compatibility
Appendix A (normative) Determination of material thickness
Bibliography
Amendment control sheet
Amendments
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
Related Information
Similar Standards
-
AS/NZS 2053.3:1995
Conduits and fittings for electrical installations - Rigid plain conduits and fittings of fibre-reinforced concrete material
-
AS/NZS 2053.4:1995
Conduits and fittings for electrical installations - Flexible plain conduits and fittings of insulating material
-
AS/NZS 2053.8:1995
Conduits and fittings for electrical installations - Flexible conduits and fittings of metal or composite material
-
AS/NZS 4296:1995
Cable trunking systems
AS/NZS 61386.21:2015 Conduit systems for cable management Particular requirements - Rigid conduit systems
Preface
1 Scope
2 Normative references
3 Definitions
4 General requirements
5 General conditions for tests
6 Classification
6.1.201 Rigid conduit and fittings of insulating material
7 Marking and documentation
7.1.201 Marking
7.1.202 Documentation
7.1.203 Marking for non-metallic conduit and fittings other than smooth bore profile wall conduit
7.1.204 Marking for metallic conduit
7.1.205 Marking for smooth bore profile wall conduit
7.1.206 Marking for flame propagating conduit
7.2.201 Marking for metallic fittings
7.2.202 Instructions for jointing of conduit in non-threadable fittings
7.2.203 Instructions for adhesives or sealants for non-threadable fittings
8 Dimensions
8.201 Non-metallic conduit
8.201.1 Diameter
8.201.2 Length of conduit
8.201.3 Conduit ends
8.202 Fittings
8.202.1 Wall thickness and fixing holes
8.202.2 Conduit entries
8.203 Metallic conduits
8.203.1 Outside diameter
8.203.2 Wall thickness
8.203.3 Threads
8.204 Metallic fittings
8.204.1 Outside diameter of threaded fittings
8.204.2 Wall thickness of threaded fittings
8.204.3 Threads
8.204.4 Dimensions of non-threadable fittings
8.205 Inside and outside diameters of smooth bore profile wall conduits
8.205.1 General
8.205.2 Length of conduits
8.205.3 Conduit spigot ends
8.205.4 Socket dimensions
8.205.5 Socket concentricity and squareness
9 Construction
9.201 Joining
10 Mechanical properties
10.4 Bending test
10.4.201 Criteria
10.4.202 Metallic conduits
10.4.203 Non-metallic conduits
10.4.204 Composite conduits
10.5 Flexing test
10.6 Collapse test
10.6.201 Metallic conduits
10.6.202 Composite conduits
10.6.203 Smooth bore profile wall conduits
10.6.204 Non-metallic conduits
10.7 Pull out strength of joints
10.201 Pipe stiffness test
10.201.1 Conduits < 100 mm nominal diameter
10.201.2 Conduits ≥ 100 mm nominal diameter
11 Electrical properties
12 Thermal properties
12.3 Satisfied test
13 Fire hazard
13.201 Non-flame propagating
14 External influences
14.201 Corrosive and polluting substances
15 Electromagnetic compatibility
Appendix A (normative) Determination of material thickness
Bibliography
Amendment control sheet
Amendments
AS/NZS 61386.21:2015
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.