AS/NZS 1158.4:2009
Road lighting - Lighting of pedestrian crossings
Specifies performance requirements for the lighting of uncontrolled pedestrian (zebra) crossings. The requirements may also be applied to other forms of pedestrian crossings, e.g. signalised crossings, where the lighting of such crossings is specifically designed.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$117.00 NZD
|
|
| HardCopy |
$130.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription pricing The cost of your subscription will depend on which standards you want to access, and how many people in your organisation need to be able to access the Online Library subscription at the same time (concurrent users). During your subscription period, we are also able to make any necessary changes and ensure you are aware of any pricing changes that result. For a quote, contact our Online Library team by emailing onlinelibrary@standards.govt.nz. |
AS/NZS 1158.4:2009 LIGHTING FOR ROADS AND PUBLIC SPACES - LIGHTING OF PEDESTRIAN CROSSINGS
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 APPLICATION
1.3 REFERENCED DOCUMENTS
1.4 DEFINITIONS
1.4.1 Aiming angle
1.4.2 Aiming point
1.4.3 Beam axis
1.4.4 Beam spread (in a particular plane)
1.4.5 Crossing width
1.4.6 Crossing zone
1.4.7 Pedestrian (zebra) crossing
1.4.8 Surround zone
1.5 SYMBOLS AND ABBREVIATIONS
SECTION 2 OBJECTIVES AND LIGHT TECHNICAL PARAMETERS
2.1 OBJECTIVES
2.2 LIGHT TECHNICAL PARAMETERS
2.2.1 General
2.2.2 Lighting performance parameters
2.2.3 Environmental parameters
2.3 DESIGN LAMP LUMEN VALUE
2.4 COLOUR RENDERING
2.5 ENERGY AUDIT
2.6 MAINTENANCE OF LIGHT TECHNICAL PARAMETERS
2.6.1 General
2.6.2 Luminaire maintenance factor
2.6.3 Lamp lumen maintenance factor
2.6.4 Maintenance factor
2.7 BASIS OF COMPLIANCE
2.7.1 Compliance of the design
2.7.2 Compliance of the installation
SECTION 3 DESIGN METHOD AND VALUES OF LIGHT TECHNICAL PARAMETERS
3.1 BASIS OF DESIGN
3.2 LIGHTING SCHEME REQUIREMENTS (AUSTRALIA)
3.2.1 General
3.2.2 Lighting categories
3.2.3 Light technical parameters
3.2.4 Calculation of EPv
3.2.5 Road lighting in the vicinity of pedestrian crossings
3.2.6 Illuminance on the crossing surface
3.2.7 Surround zone illumination
3.2.8 Luminaire type
3.2.9 Lighting equipment requirements
3.3 LIGHTING SCHEME REQUIREMENTS (NEW ZEALAND)
3.3.1 Traffic rule
3.3.2 Amber globes or disks at pedestrian crossings
3.3.3 Supplementary lighting
3.3.4 Lighting categories
3.3.5 Light technical parameters
SECTION 4 PROVISION OF LUMINAIRE DATA
4.1 LUMINAIRE DATA
APPENDIX A - BIBLIOGRAPHY
APPENDIX B - GUIDE TO THE DESIGN OF PEDESTRIAN CROSSING SCHEMES (Australia only)
B1 INTRODUCTION
B2 CARRIAGEWAY WIDTH
B3 OVERHANG
B4 MOUNTING HEIGHT
B5 LOCATION AND AIMING OF PEDESTRIAN CROSSING LUMINAIRES
B5.1 Horizontal distance from luminaires to crossing centre-line
B5.2 Aiming of pedestrian crossing luminaires
APPENDIX C - DESIGN BRIEF
C1 SCOPE
C2 SITE PLANS
C3 PERFORMANCE REQUIREMENTS
C4 SPECIFIC REQUIREMENTS
APPENDIX D - DOCUMENTATION REQUIRED FOR DEMONSTRATING COMPLIANCE WITH THIS STANDARD
D1 MANDATORY REQUIREMENTS
D2 OPTIONAL REQUIREMENTS
APPENDIX E - LUMINAIRE MAINTENANCE FACTORS
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 1158.0:2005
Lighting for roads and public spaces - Part 0: Introduction -
AS/NZS 1158.0:2005 A1
Lighting for roads and public spaces - Part 0: Introduction: Amendment 1 -
AS/NZS 1158.0:2005 A2
Lighting for roads and public spaces - Part 0: Introduction: Amendment 2 -
AS/NZS 1158.1.1:2022
Lighting for roads and public spaces - Vehicular traffic (Category V) lighting - Performance and design requirements
AS/NZS 1158.4:2009 LIGHTING FOR ROADS AND PUBLIC SPACES - LIGHTING OF PEDESTRIAN CROSSINGS
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 APPLICATION
1.3 REFERENCED DOCUMENTS
1.4 DEFINITIONS
1.4.1 Aiming angle
1.4.2 Aiming point
1.4.3 Beam axis
1.4.4 Beam spread (in a particular plane)
1.4.5 Crossing width
1.4.6 Crossing zone
1.4.7 Pedestrian (zebra) crossing
1.4.8 Surround zone
1.5 SYMBOLS AND ABBREVIATIONS
SECTION 2 OBJECTIVES AND LIGHT TECHNICAL PARAMETERS
2.1 OBJECTIVES
2.2 LIGHT TECHNICAL PARAMETERS
2.2.1 General
2.2.2 Lighting performance parameters
2.2.3 Environmental parameters
2.3 DESIGN LAMP LUMEN VALUE
2.4 COLOUR RENDERING
2.5 ENERGY AUDIT
2.6 MAINTENANCE OF LIGHT TECHNICAL PARAMETERS
2.6.1 General
2.6.2 Luminaire maintenance factor
2.6.3 Lamp lumen maintenance factor
2.6.4 Maintenance factor
2.7 BASIS OF COMPLIANCE
2.7.1 Compliance of the design
2.7.2 Compliance of the installation
SECTION 3 DESIGN METHOD AND VALUES OF LIGHT TECHNICAL PARAMETERS
3.1 BASIS OF DESIGN
3.2 LIGHTING SCHEME REQUIREMENTS (AUSTRALIA)
3.2.1 General
3.2.2 Lighting categories
3.2.3 Light technical parameters
3.2.4 Calculation of EPv
3.2.5 Road lighting in the vicinity of pedestrian crossings
3.2.6 Illuminance on the crossing surface
3.2.7 Surround zone illumination
3.2.8 Luminaire type
3.2.9 Lighting equipment requirements
3.3 LIGHTING SCHEME REQUIREMENTS (NEW ZEALAND)
3.3.1 Traffic rule
3.3.2 Amber globes or disks at pedestrian crossings
3.3.3 Supplementary lighting
3.3.4 Lighting categories
3.3.5 Light technical parameters
SECTION 4 PROVISION OF LUMINAIRE DATA
4.1 LUMINAIRE DATA
APPENDIX A - BIBLIOGRAPHY
APPENDIX B - GUIDE TO THE DESIGN OF PEDESTRIAN CROSSING SCHEMES (Australia only)
B1 INTRODUCTION
B2 CARRIAGEWAY WIDTH
B3 OVERHANG
B4 MOUNTING HEIGHT
B5 LOCATION AND AIMING OF PEDESTRIAN CROSSING LUMINAIRES
B5.1 Horizontal distance from luminaires to crossing centre-line
B5.2 Aiming of pedestrian crossing luminaires
APPENDIX C - DESIGN BRIEF
C1 SCOPE
C2 SITE PLANS
C3 PERFORMANCE REQUIREMENTS
C4 SPECIFIC REQUIREMENTS
APPENDIX D - DOCUMENTATION REQUIRED FOR DEMONSTRATING COMPLIANCE WITH THIS STANDARD
D1 MANDATORY REQUIREMENTS
D2 OPTIONAL REQUIREMENTS
APPENDIX E - LUMINAIRE MAINTENANCE FACTORS
AS/NZS 1158.4:2009
Online Library subscription pricing
The cost of your subscription will depend on which standards you want to access, and how many people in your organisation need to be able to access the Online Library subscription at the same time (concurrent users). During your subscription period, we are also able to make any necessary changes and ensure you are aware of any pricing changes that result. For a quote, contact our Online Library team by emailing onlinelibrary@standards.govt.nz.