ISO publications

Here are recent new publications from the International Organization for Standardization (ISO). Hard copy and PDF formats of ISO standards are available for purchase from our website www.standards.co.nz by entering the standard number.

  • ISO 230-2:2014 Test code for machine tools. Determination of accuracy and repeatability of positioning of numerically controlled axes
    AMENDMENT 1:January 2016
  • ISO 289-2:2016 (Edition 2) Rubber, unvulcanized. Determinations using a shearing-disc viscometer. Determination of prevulcanization characteristics
  • ISO 669:2016 (Edition 3) Resistance welding. Resistance welding equipment. Mechanical and electrical requirements
  • ISO 1288-1:2016 Glass in building. Determination of the bending strength of glass. Fundamentals of testing glass
  • ISO 1288-2:2016 Glass in building. Determination of the bending strength of glass. Coaxial double-ring test on flat specimens with large test surface areas
  • ISO 1288-3:2016 Glass in building. Determination of the bending strength of glass. Test with specimen supported at two points (four point bending)
  • ISO 1288-4:2016 Glass in building. Determination of the bending strength of glass. Testing of channel shaped glass
  • ISO 1288-5:2016 Glass in building. Determination of the bending strength of glass. Coaxial double ring test on flat specimens with small test surface areas
  • ISO 2417:2016 (Edition 3) Leather. Physical and mechanical tests. Determination of the static absorption of water
  • ISO 2589:2016 (Edition 3) Leather. Physical and mechanical tests. Determination of thickness
  • ISO 2811-1:2016 (Edition 3) Paints and varnishes. Determination of density. Pycnometer method
  • ISO 3209:2016 (Edition 3) Aerospace. Nuts, anchor, self-locking, floating, two lug, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature)/235 °C, 1 100 MPa (at ambient temperature)/315 °C and 1 100 MPa (at ambient temperature)/425 °C. Dimensions
  • ISO 3377-2:2016 (Edition 2) Leather. Physical and mechanical tests. Determination of tear load. Double edge tear
  • ISO 4499-3:2016 Hardmetals. Metallographic determination of microstructure. Measurement of microstructural features in Ti (C, N) and WC/cubic carbide based hardmetals
  • ISO 4499-4:2016 Hardmetals. Metallographic determination of microstructure. Characterisation of porosity, carbon defects and eta-phase content
  • ISO 4624:2016 (Edition 3) Paints and varnishes. Pull-off test for adhesion
  • ISO 4829-2:2016 (Edition 2) Steels. Determination of total silicon contents. Reduced molybdosilicate spectrophotometric method. Silicon contents between 0,01 % and 0,05 %
  • ISO 4892-3:2016 (Edition 4) Plastics. Methods of exposure to laboratory light sources. Fluorescent UV lamps
  • ISO 4938:2016 (Edition 2) Steel and iron. Determination of nickel content. Gravimetric or titrimetric method
  • ISO 4946:2016 (Edition 2) Steel and cast iron. Determination of copper. 2,2’-Biquinoline spectrophotometric method
  • ISO 5360:2016 (Edition 4) Anaesthetic vaporizers. Agent-specific filling systems
  • ISO 5495:2005 Sensory analysis. Methodology. Paired comparison test
    AMENDMENT 1:February 2016
  • ISO 6885:2016 (Edition 4) Animal and vegetable fats and oils. Determination of anisidine value
  • ISO 6886:2016 (Edition 3) Animal and vegetable fats and oils. Determination of oxidative stability (accelerated oxidation test)
  • ISO 7396-1:2016 (Edition 3) Medical gas pipeline systems. Pipeline systems for compressed medical gases and vacuum
  • ISO 8362-5:2016 (Edition 3) Injection containers and accessories. Freeze drying closures for injection vials
  • ISO 8903:2016 (Edition 2) Broadleaved sawn timber. Nominal sizes
  • ISO 9241-161:2016 Ergonomics of human-system interaction. Guidance on visual user-interface elements
  • ISO 9241-391:2016 Ergonomics of human-system interaction. Requirements, analysis and compliance test methods for the reduction of photosensitive seizures
  • ISO 9454-1:2016 (Edition 2) Soft soldering fluxes. Classification and requirements. Classification, labelling and packaging
  • ISO 9618:2016 (Edition 2) Aerospace. Nuts, hexagonal, slotted (castellated), reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 °C, 450 MPa (at ambient temperature)/235 °C, 600 MPa (at ambient temperature)/425 °C, 900 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/315 °C, 900 MPa (at ambient temperature)/650 °C, 1 100 MPa (at ambient temperature)/235 °C, 1 100 MPa (at ambient temperature)/730 °C and 1 250 MPa (at ambient temperature)/600 °C. Dimensions
  • ISO 9693-2:2016 Dentistry. Compatibility testing. Ceramic-ceramic systems
  • ISO 9705-1:2016 Reaction to fire tests. Room corner test for wall and ceiling lining products. Test method for a small room configuration
  • ISO/IEC/IEEE 8802-1X:2013 Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Portbased network access control
    AMENDMENT 1:February 2016
  • ISO 11119-4:2016 Gas cylinders. Refillable composite gas cylinders. Design, construction and testing. Fully wrapped fibre reinforced composite gas cylinders up to 150 l with load-sharing welded metallic liners
  • ISO 11145:2016 (Edition 4) Optics and photonics. Lasers and laser-related equipment. Vocabulary and symbols
  • ISO 11177:2016 Vitreous and porcelain enamels. Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply. Quality requirements and testing
  • ISO 11197:2016 (Edition 3) Medical supply units
  • ISO 11592-1:2016 Small craft. Determination of maximum propulsion power rating using manoeuvring speed. Craft with a length of hull less than 8 m
  • ISO 11665-9:2016 Measurement of radioactivity in the environment. Air: Radon-222. Test methods for exhalation rate of building materials
  • ISO 12156-1:2016 (Edition 3) Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR). Test method
  • ISO 12260:2016 (Edition 2) Aerospace. Screws, pan head, internal offset cruciform ribbed or unribbed drive, stepped shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa. Dimensions
  • ISO 12707:2016 Non-destructive testing. Magnetic particle testing. Vocabulary
  • ISO/TS 13399-312:2016 Cutting tool data representation and exchange. Creation and exchange of 3D models. Reamers for indexable inserts
  • ISO/TS 13399-401:2016 Cutting tool data representation and exchange. Creation and exchange of 3D models. Converting, extending and reducing adaptive items
  • ISO 13904:2016 (Edition 2) Animal feeding stuffs. Determination of tryptophan content
  • ISO 14408:2016 (Edition 3) Tracheal tubes designed for laser surgery. Requirements for marking and accompanying information
  • ISO/IEC 14543-3-11: 2016 Information technology. Home electronic system (HES) architecture. Frequency Modulated Wireless Short-Packet (FMWSP) protocol optimised for energy harvesting. Architecture and lower layer protocols
  • ISO 15009:2016 (Edition 3) Soil quality. Gas chromatographic determination of the content of volatile aromatic hydrocarbons, naphthalene and volatile halogenated hydrocarbons. Purge-and trap method with thermal desorption
  • ISO/TS 15066:2016 Robots and robotic devices. Collaborative robots
  • ISO/IEC 15418:2016 (Edition 3) Information technology. Automatic identification and data capture techniques. GS1 Application Identifiers and ASC MH10 Data Identifiers and maintenance
  • ISO 15883-7:2016 Washer-disinfectors. Requirements and tests for washer-disinfectors employing chemical disinfection for non-invasive, noncritical thermolabile medical devices and healthcare equipment
  • ISO 16063-21:2003 Methods for the calibration of vibration and shock transducers. Vibration calibration by comparison to a reference transducer
    AMENDMENT 1:February 2016
  • ISO 16128-1:2016 Guidelines on technical definitions and criteria for natural and organic cosmetic ingredients and products. Definitions for ingredients
  • ISO 16904:2016 Petroleum and natural gas industries. Design and testing of LNG marine transfer arms for conventional onshore terminals
  • ISO 17229:2016 (Edition 2) Leather. Physical and mechanical tests. Determination of water vapour absorption
  • ISO 17236:2016 (Edition 2) Leather. Physical and mechanical tests. Determination of extension set
  • ISO 17348:2016 Petroleum and natural gas industries. Materials selection for high content CO2 for casing, tubing and downhole equipment
  • ISO 17349:2016 Petroleum and natural gas industries. Offshore platforms handling streams with high content of CO2 at high pressures
  • ISO 17491-4:2008 Protective clothing. Test methods for clothing providing protection against chemicals. Determination of resistance to penetration by a spray of liquid (spray test)
    AMENDMENT 1:February 2016
  • ISO 17855-2:2016 Plastics. Polyethylene (PE) moulding and extrusion materials. Preparation of test specimens and determination of properties
  • ISO/TS 18166:2016 Numerical welding simulation. Execution and documentation
  • ISO 18555:2016 Metallic and other inorganic coatings. Determination of thermal conductivity of thermal barrier coatings
  • ISO 19069-2:2016 Plastics. Polypropylene (PP) moulding and extrusion materials. Preparation of test specimens and determination of properties
  • ISO 19070:2016 Leather. Chemical determination of N-methyl-2- pyrrolidone (NMP) in leather
  • ISO 19071:2016 Leather. Chemical tests. Determination of chromium (VI) and the reductive potential for chromium tanning agents
  • ISO/IEC 19762:2016 Information technology. Automatic identification and data capture (AIDC) techniques. Harmonized vocabulary
  • ISO 19901-5:2016 (Edition 2) Petroleum and natural gas industries. Specific requirements for offshore structures. Weight control during engineering and construction
  • ISO 20187:2016 Inflatable play equipment. Safety requirements and test methods
  • ISO/TR 21414:2016 Hydrometry. Groundwater. Surface geophysical surveys for hydrogeological purposes
  • ISO 21809-3:2016 (Edition 2) Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems. Field joint coatings
  • ISO 22155:2016 (Edition 3) Soil quality. Gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected ethers. Static headspace method
  • ISO/IEC 23001-7:2016 (Edition 3) Information technology. MPEG systems technologies. Common encryption in ISO base media file format files
  • ISO 23233:2016 (Edition 2) Rubber, vulcanized or thermoplastic. Determination of resistance to abrasion using a driven, vertical abrasive disc
  • ISO 28721-5:2016 Vitreous and porcelain enamels. Glass-lined apparatus for process plants. Presentation and characterization of defects
  • ISO/IEC 80079-20-2:2016 Explosive atmospheres. Material characteristics. Combustible dusts test methods
  • ISO/IEC 80079-38:2016 Explosive atmospheres. Equipment and components in explosive atmospheres in underground mines

Published in international.