ASTM publications

Here are recent publications from ASTM International. To purchase ASTM standards in hard copy or PDF format, please call 0800 782 632 during business hours or email enquiries@standards.co.nz.

  • A139/A139M - Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over) has been revised to A139/A139M-16 developed by Committee A01.09, ASTM BOS Volume 01.01.
  • A193/A193M - Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications has been revised to A193/A193M-16 developed by Committee A01.22, ASTM BOS Volume 01.01.
  • A216/A216M - Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service has been revised to A216/A216M-16 developed by Committee A01.18, ASTM BOS Volume 01.02.
  • A333/A333M - Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness has been revised to A333/A333M-16 developed by Committee A01.10, ASTM BOS Volume 01.01.
  • A334/A334M - Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service has been reapproved, available as A334/A334M-04a(2016) developed by Committee A01.10, ASTM BOS Volume 01.01.
  • A488/A488M - Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel has been revised to A488/A488M-16 developed by Committee A01.18, ASTM BOS Volume 01.02.
  • A493 - Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging has been revised to A493-16 developed by Committee A01.17, ASTM BOS Volume 01.03.
  • A505 - Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for has been revised to A505-16 developed by Committee A01.19, ASTM BOS Volume 01.03.
  • A554 - Standard Specification for Welded Stainless Steel Mechanical Tubing has been revised to A554-16 developed by Committee A01.10, ASTM BOS Volume 01.01.
  • A615/A615M - Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement has been revised to A615/A615M-16 developed by Committee A01.05, ASTM BOS Volume 01.04.
  • A645/A645M - Standard Specification for Pressure Vessel Plates, 5 % and 51 2 % Nickel Alloy Steels, Specially Heat Treated has been reapproved, available as A645/A645M-10(2016) developed by Committee A01.11, ASTM BOS Volume 01.04.
  • A653/A653M - Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process has been editorially changed, available as A653/A653M-15e1 developed by Committee A05.11, ASTM BOS Volume 01.06.
  • A706/A706M - Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement has been revised to A706/A706M-16 developed by Committee A01.05, ASTM BOS Volume 01.04.
  • A709/A709M - Standard Specification for Structural Steel for Bridges has been revised to A709/A709M-16 developed by Committee A01.02, ASTM BOS Volume 01.04.
  • A747/A747M - Standard Specification for Steel Castings, Stainless, Precipitation Hardening has been revised to A747/A747M-16 developed by Committee A01.18, ASTM BOS Volume 01.02.
  • A789/A789M - Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service has been revised to A789/A789M-16 developed by Committee A01.10, ASTM BOS Volume 01.01.
  • A790/A790M - Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe has been revised to A790/A790M-16 developed by Committee A01.10, ASTM BOS Volume 01.01.
  • A803/A803M - Standard Specification for Seamless and Welded Ferritic Stainless Steel Feedwater Heater Tubes has been revised to A803/A803M-16 developed by Committee A01.10, ASTM BOS Volume 01.01.
  • A903/A903M - Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection has been editorially changed, available as A903/A903M-99(2012)e1 developed by Committee A01.18, ASTM BOS Volume 01.02.
  • A933/A933M - Standard Specification for Vinyl-Coated Steel Wire and Welded Wire Reinforcement (Withdrawn 2016) has been withdrawn, with no replacement. A933/A933M-14 developed by Committee A01.05, ASTM BOS Volume 01.04.
  • A934/A934M - Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars has been revised to A934/A934M-16 developed by Committee A01.05, ASTM BOS Volume 01.04.
  • A947M - Standard Specification for Textured Stainless Steel Sheet [Metric] has been revised to A947M-16 developed by Committee A01.17, ASTM BOS Volume 01.03.
  • A962/A962M - Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range has been revised to A962/A962M-16 developed by Committee A01.22, ASTM BOS Volume 01.01.
  • A996/A996M - Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement has been revised to A996/A996M-16 developed by Committee A01.05, ASTM BOS Volume 01.04.
  • A1022/A1022M - Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement has been revised to A1022/A1022M-16 developed by Committee A01.05, ASTM BOS Volume 01.04.
  • A1035/A1035M - Standard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement has been revised to A1035/A1035M-16a developed by Committee A01.05, ASTM BOS Volume 01.04.
  • A1060/A1060M - Standard Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed, for Concrete has been revised to A1060/A1060M-16 developed by Committee A01.05, ASTM BOS Volume 01.04.
  • A1064/A1064M - Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete has been revised to A1064/A1064M-16 developed by Committee A01.05, ASTM BOS Volume 01.04.
  • B241/B241M - Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube has been revised to B241/B241M-16 developed by Committee B07.03, ASTM BOS Volume 02.02.
  • C29/C29M - Standard Test Method for Bulk Density (“Unit Weight”) and Voids in Aggregate has been revised to C29/C29M-16 developed by Committee C09.20, ASTM BOS Volume 04.02.
  • C109/C109M - Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens) has been revised to C109/C109M-16 developed by Committee C01.27, ASTM BOS Volume 04.01.
  • C125 - Standard Terminology Relating to Concrete and Concrete Aggregates has been revised to C125-15b developed by Committee C09.91, ASTM BOS Volume 04.02.
  • C143/C143M - Standard Test Method for Slump of Hydraulic-Cement Concrete has been revised to C143/C143M-15a developed by Committee C09.60, ASTM BOS Volume 04.02.
  • C171 - Standard Specification for Sheet Materials for Curing Concrete has been revised to C171-16 developed by Committee C09.22, ASTM BOS Volume 04.02.
  • C173/C173M - Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method has been revised to C173/C173M-16 developed by Committee C09.60, ASTM BOS Volume 04.02.
  • C196 - Standard Specification for Expanded or Exfoliated Vermiculite Thermal Insulating Cement has been reapproved, available as C196-00(2016) developed by Committee C16.20, ASTM BOS Volume 04.06.
  • C204 - Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus has been revised to C204-16 developed by Committee C01.25, ASTM BOS Volume 04.01.
  • C271/C271M - Standard Test Method for Density of Sandwich Core Materials has been revised to C271/C271M-16 developed by Committee D30.09, ASTM BOS Volume 15.03.
  • C366/C366M - Standard Test Methods for Measurement of Thickness of Sandwich Cores has been revised to C366/C366M-16 developed by Committee D30.09, ASTM BOS Volume 15.03.
  • C506 - Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe has been revised to C506-16a developed by Committee C13.02, ASTM BOS Volume 04.05.
  • C506M - Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe (Metric) has been revised to C506M-16a developed by Committee C13.02, ASTM BOS Volume 04.05.
  • C552 - Standard Specification for Cellular Glass Thermal Insulation has been revised to C552-16 developed by Committee C16.20, ASTM BOS Volume 04.06.
  • C708 - Standard Specification for Nuclear-Grade Beryllium Oxide Powder has been revised to C708-16 developed by Committee C26.03, ASTM BOS Volume 12.01.
  • C753 - Standard Specification for Nuclear-Grade, Sinterable Uranium Dioxide Powder has been revised to C753-16 developed by Committee C26.02, ASTM BOS Volume 12.01.
  • C881/C881M - Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete has been revised to C881/C881M-15 developed by Committee C09.25, ASTM BOS Volume 04.02.
  • C910 - Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants has been revised to C910-16 developed by Committee C24.30, ASTM BOS Volume 04.07.
  • C937 - Standard Specification for Grout Fluidifier for Preplaced-Aggregate Concrete has been revised to C937-16 developed by Committee C09.41, ASTM BOS Volume 04.02.
  • C938 - Standard Practice for Proportioning Grout Mixtures for Preplaced-Aggregate Concrete has been revised to C938-16 developed by Committee C09.41, ASTM BOS Volume 04.02.
  • C939/C939M - Standard Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method) has been revised to C939/C939M-16 developed by Committee C09.41, ASTM BOS Volume 04.02.
  • C979/C979M - Standard Specification for Pigments for Integrally Colored Concrete has been revised to C979/C979M-16 developed by Committee C09.23, ASTM BOS Volume 04.02.
  • C992 - Standard Specification for Boron-Based Neutron Absorbing Material Systems for Use in Nuclear Fuel Storage Racks in a Pool Environment has been revised (with title change) to C992-16 developed by Committee C26.03, ASTM BOS Volume 12.01.
  • C1043 - Standard Practice for Guarded-Hot-Plate Design Using Circular Line-Heat Sources has been revised to C1043-16 developed by Committee C16.30, ASTM BOS Volume 04.06.
  • C1090/C1090M - Standard Test Method for Measuring Changes in Height of Cylindrical Specimens of Hydraulic-Cement Grout has been revised (with designation change) to C1090/C1090M-15 developed by Committee C09.68, ASTM BOS Volume 04.02.
  • C1231/C1231M - Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Cylindrical Concrete Specimens has been revised (with title change) to C1231/C1231M-15 developed by Committee C09.61, ASTM BOS Volume 04.02.
  • C1320 - Standard Practice for Installation of Mineral Fiber Batt and Blanket Thermal Insulation for Light Frame Construction has been reapproved, available as C1320-10(2016) developed by Committee C16.23, ASTM BOS Volume 04.06.
  • C1408 - Standard Test Method for Carbon (Total) in Uranium Oxide Powders and Pellets By Direct Combustion-Infrared Detection Method has been revised to C1408-16 developed by Committee C26.05, ASTM BOS Volume 12.01.
  • C1421 - Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature has been revised to C1421-16 developed by Committee C28.01, ASTM BOS Volume 15.01.
  • C1423 - Standard Guide for Selecting Jacketing Materials for Thermal Insulation has been revised to C1423-16 developed by Committee C16.40, ASTM BOS Volume 04.06.
  • C1433M - Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric) has been revised to C1433M-16a developed by Committee C13.07, ASTM BOS Volume 04.05.
  • C1506 - Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters has been revised to C1506-16a developed by Committee C01.22, ASTM BOS Volume 04.01.
  • C1558 - Standard Guide for Development of Standard Data Records for Computerization of Thermal Transmission Test Data for Thermal Insulation has been revised to C1558-16 developed by Committee C16.30, ASTM BOS Volume 04.06.
  • C1620 - Standard Specification for Aerosol Polyurethane and Aerosol Latex Foam Sealants has been revised to C1620-16 developed by Committee C24.61, ASTM BOS Volume 04.07.
  • C1630 - Standard Guide for Development of Coverage Charts for Loose-Fill Thermal Building Insulations has been reapproved, available as C1630-11(2016) developed by Committee C16.23, ASTM BOS Volume 04.06.
  • C1696 - Standard Guide for Industrial Thermal Insulation Systems has been revised to C1696-16 developed by Committee C16.40, ASTM BOS Volume 04.06.
  • C1729 - Standard Specification for Aluminum Jacketing for Insulation has been revised to C1729-16 developed by Committee C16.40, ASTM BOS Volume 04.06.
  • C1729M - Standard Specification for Aluminum Jacketing for Insulation has been revised to C1729M-16 developed by Committee C16.40, ASTM BOS Volume 04.06.
  • C1737 - Standard Guide for Evaluating Temperature Effects to Aerosol Foam Sealant During and After Dispensing has been reapproved, available as C1737-10(2016) developed by Committee C24.61, ASTM BOS Volume 04.07.
  • C1767 - Standard Specification for Stainless Steel Jacketing for Insulation has been revised to C1767-16 developed by Committee C16.40, ASTM BOS Volume 04.06.
  • C1767M - Standard Specification for Stainless Steel Jacketing for Insulation has been revised to C1767M-16 developed by Committee C16.40, ASTM BOS Volume 04.06.
  • C1780 - Standard Practice for Installation Methods for Adhered Manufactured Stone Masonry Veneer has been revised to C1780-16 developed by Committee C15.05, ASTM BOS Volume 04.05.
  • C1785 - Standard Test Method for Concentration of Pinhole Detections in Moisture Barriers on Metal Jacketing has been revised to C1785-16 developed by Committee C16.33, ASTM BOS Volume 04.06.
  • C1816 - Standard Practice for The Ion Exchange Separation of Small Volume Samples Containing Uranium, Americium, and Plutonium Prior to Isotopic Abundance and Content Analysis has been revised to C1816-16 developed by Committee C26.05, ASTM BOS Volume 12.01.
  • C1817 - Standard Test Method for The Determination of the Oxygen to Metal (O/M) Ratio in Sintered Mixed Oxide ((U, Pu)O2) Pellets by Gravimetry has been revised to C1817-16 developed by Committee C26.05, ASTM BOS Volume 12.01.
  • C1821/C1821M - Standard Practice for Installation of Underground Circular Precast Concrete Manhole Structures is a new standard, now available. C1821/C1821M-16 developed by Committee C13.06, ASTM BOS Volume 04.05.
  • C1824 - Standard Test Method for Full Scale Bending Test of Spun Prestressed Concrete Bases for Tapered Steel Lighting Poles has been editorially changed, available as C1824-16e1 developed by Committee C27.20, ASTM BOS Volume 04.05.
  • C1835 - Standard Classification for Fiber Reinforced Silicon Carbide-Silicon Carbide (SiC-SiC) Composite Structures is a new standard, now available. C1835-16 developed by Committee C28.07, ASTM BOS Volume 15.01.
  • C1836 - Standard Classification for Fiber Reinforced Carbon-Carbon Composite Structures is a new standard, now available. C1836-16 developed by Committee C28.07, ASTM BOS Volume 15.01.
  • D204 - Standard Test Methods for Sewing Threads has been reapproved, available as D204-02(2016) developed by Committee D13.58, ASTM BOS Volume 07.01.
  • D471 - Standard Test Method for Rubber Property—Effect of Liquids has been revised to D471-16 developed by Committee D11.15, ASTM BOS Volume 09.01.
  • D473 - Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method has been editorially changed, available as D473-07(2012)e1 developed by Committee D02.02, ASTM BOS Volume 05.01.
  • D779 - Standard Test Method for Determining the Water Vapor Resistance of Sheet Materials in Contact with Liquid Water by the Dry Indicator Method has been reinstated as D779-16 developed by Committee E06.55, ASTM BOS Volume 04.12.
  • D883 - Standard Terminology Relating to Plastics has been editorially changed, available as D883-12e1 developed by Committee D20.92, ASTM BOS Volume 08.01.
  • D974 - Standard Test Method for Acid and Base Number by Color-Indicator Titration has been editorially changed, available as D974-14e2 developed by Committee D02.06, ASTM BOS Volume 05.01.
  • D1047 - Standard Specification for Poly(Vinyl Chloride) Jacket for Wire and Cable has been revised to D1047-16 developed by Committee D09.18, ASTM BOS Volume 10.01.
  • D1079 - Standard Terminology Relating to Roofing and Waterproofing has been revised to D1079-16 developed by Committee D08.01, ASTM BOS Volume 04.04.
  • D1578 - Standard Test Method for Breaking Strength of Yarn in Skein Form has been reapproved, available as D1578-93(2016) developed by Committee D13.58, ASTM BOS Volume 07.01.
  • D1883 - Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils has been revised to D1883-16 developed by Committee D18.05, ASTM BOS Volume 04.08.
  • D1977 - Standard Test Method for Nickel and Vanadium in FCC Equilibrium Catalysts by Hydrofluoric/Sulfuric Acid Decomposition and Atomic Spectroscopic Analysis has been revised to D1977-16 developed by Committee D32.03, ASTM BOS Volume 05.06.
  • D2259 - Standard Test Method for Shrinkage of Yarns has been reapproved, available as D2259-02(2016) developed by Committee D13.58, ASTM BOS Volume 07.01.
  • D2639/D2639M - Standard Test Method for Plastic Properties of Coal by the Constant-Torque Gieseler Plastometer has been revised to D2639/D2639M-16 developed by Committee D05.15, ASTM BOS Volume 05.06.
  • D2852 - Standard Specification for Styrene-Rubber (SR) Plastic Drain Pipe and Fittings has been revised to D2852-16 developed by Committee F17.65, ASTM BOS Volume 08.04.
  • D3279 - Standard Test Method for n-Heptane Insolubles has been editorially changed, available as D3279-12e1 developed by Committee D04.47, ASTM BOS Volume 04.03.
  • D3316 - Standard Test Method for Stability of Perchloroethylene with Copper has been reapproved, available as D3316-06(2016) developed by Committee D26.04, ASTM BOS Volume 15.05.
  • D3410/D3410M - Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading has been revised to D3410/D3410M-16 developed by Committee D30.04, ASTM BOS Volume 15.03.
  • D3693 - Standard Specification for Labeled Length per Holder of Sewing Thread has been reapproved, available as D3693-02(2016) developed by Committee D13.58, ASTM BOS Volume 07.01.
  • D4029/D4029M - Standard Specification for Finished Woven Glass Fabrics has been revised to D4029/D4029M-16 developed by Committee D13.18, ASTM BOS Volume 07.01.
  • D4056 - Standard Test Method for Estimation of Solubility of Water in Hydrocarbon and Aliphatic Ester Lubricants has been revised to D4056-16 developed by Committee D02.L0.07, ASTM BOS Volume 05.02.
  • D4253 - Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table has been revised to D4253-16 developed by Committee D18.03, ASTM BOS Volume 04.08.
  • D4254 - Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density has been revised to D4254-16 developed by Committee D18.03, ASTM BOS Volume 04.08.
  • D4389/D4389M - Standard Specification for Finished Glass Fabrics Woven From Rovings has been revised to D4389/D4389M-16 developed by Committee D13.18, ASTM BOS Volume 07.01.
  • D4391 - Standard Terminology Relating to The Burning Behavior of Textiles has been revised to D4391-16 developed by Committee D13.92, ASTM BOS Volume 07.01.
  • D4727/D4727M - Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes has been editorially changed, available as D4727/D4727M-15e1 developed by Committee D10.27, ASTM BOS Volume 15.10.
  • D4844 - Standard Guide for Air Monitoring at Waste Management Facilities for Worker Protection has been revised to D4844-16 developed by Committee D34.01.01, ASTM BOS Volume 11.04.
  • D4914/D4914M - Standard Test Methods for Density of Soil and Rock in Place by the Sand Replacement Method in a Test Pit has been revised (with designation change) to D4914/D4914M-16 developed by Committee D18.08, ASTM BOS Volume 04.08.
  • D4956 - Standard Specification for Retroreflective Sheeting for Traffic Control has been revised to D4956-16 developed by Committee D04.38, ASTM BOS Volume 04.03.
  • D4970/D4970M - Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Martindale Tester has been revised to D4970/D4970M-16 developed by Committee D13.60, ASTM BOS Volume 07.02.
  • D5067 - Standard Specification for Artists' Watercolor Paints has been revised to D5067-16 developed by Committee D01.57, ASTM BOS Volume 06.02.
  • D5078/D5078M - Standard Specification for Crack Filler, Hot-Applied, for Asphalt Concrete and Portland Cement Concrete Pavements has been reapproved, available as D5078/D5078M-11(2016) developed by Committee D04.33, ASTM BOS Volume 04.03.
  • D5098 - Standard Specification for Artists' Acrylic Dispersion Paints has been revised to D5098-16 developed by Committee D01.57, ASTM BOS Volume 06.02.
  • D5249 - Standard Specification for Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland-Cement Concrete and Asphalt Joints has been reapproved, available as D5249-10(2016) developed by Committee D04.33, ASTM BOS Volume 04.03.
  • D5253 - Standard Terminology Relating to Floor Coverings and Textile Upholstered Furniture has been reapproved, available as D5253-04(2016) developed by Committee D13.62, ASTM BOS Volume 07.02.
  • D5330/D5330M - Standard Specification for Pressure-Sensitive Tape for Packaging, Filament-Reinforced has been editorially changed, available as D5330/D5330M-06(2012)e1 developed by Committee D10.14, ASTM BOS Volume 15.10.
  • D5609 - Standard Guide for Defining Boundary Conditions in Groundwater Flow Modeling has been revised to D5609-16 developed by Committee D18.21, ASTM BOS Volume 04.08.
  • D5724 - Standard Specification for Gouache Paints has been revised to D5724-16 developed by Committee D01.57, ASTM BOS Volume 06.02.
  • D5964 - Standard Practice for Rubber IRM 901, IRM 902, and IRM 903 Replacement Oils for ASTM No. 1, ASTM No. 2, ASTM No. 3 Oils, and IRM 905 formerly ASTM No. 5 Oil has been revised to D5964-16 developed by Committee D11.15, ASTM BOS Volume 09.01.
  • D6128 - Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Tester has been revised to D6128-16 developed by Committee D18.24, ASTM BOS Volume 04.09.
  • D6271 - Standard Test Method for Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on Solanesol has been reapproved, available as D6271-10(2016) developed by Committee D22.05, ASTM BOS Volume 11.07.
  • D6281 - Standard Test Method for Airborne Asbestos Concentration in Ambient and Indoor Atmospheres as Determined by Transmission Electron Microscopy Direct Transfer (TEM) has been revised to D6281-15 developed by Committee D22.07, ASTM BOS Volume 11.07.
  • D6504 - Standard Practice for On-Line Determination of Cation Conductivity in High Purity Water has been reapproved (with editorial change), available as D6504-11(2016)e1 developed by Committee D19.03, ASTM BOS Volume 11.01.
  • D6612 - Standard Test Method for Yarn Number and Yarn Number Variability Using Automated Tester has been reapproved, available as D6612-00(2016) developed by Committee D13.58, ASTM BOS Volume 07.02.
  • D6773 - Standard Test Method for Bulk Solids Using Schulze Ring Shear Tester has been revised to D6773-16 developed by Committee D18.24, ASTM BOS Volume 04.09.
  • D6917 - Standard Guide for Selection of Test Methods for Prefabricated Vertical Drains (PVD) has been revised to D6917-16 developed by Committee D35.03, ASTM BOS Volume 04.13.
  • D6992 - Standard Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method has been revised to D6992-16 developed by Committee D35.02, ASTM BOS Volume 04.13.
  • D7153 - Standard Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method) has been editorially changed, available as D7153-15e1 developed by Committee D02.07, ASTM BOS Volume 05.04.
  • D7404 - Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer has been reapproved, available as D7404-07(2016) developed by Committee D04.42, ASTM BOS Volume 04.03.
  • D7423 - Standard Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection has been revised to D7423-16 developed by Committee D02.D0.04, ASTM BOS Volume 05.04.
  • D7442 - Standard Practice for Sample Preparation of Fluid Catalytic Cracking Catalysts and Zeolites for Elemental Analysis by Inductively Coupled Plasma Optical Emission Spectroscopy has been revised (with title change) to D7442-16 developed by Committee D32.03, ASTM BOS Volume 05.06.
  • D7459 - Standard Practice for Collection of Integrated Samples for the Speciation of Biomass (Biogenic) and Fossil-Derived Carbon Dioxide Emitted from Stationary Emissions Sources has been reapproved, available as D7459-08(2016) developed by Committee D22.03, ASTM BOS Volume 11.07.
  • D7487 - Standard Practice for Polyurethane Raw Materials: Polyurethane Foam Cup Test has been editorially changed, available as D7487-13e1 developed by Committee D20.22, ASTM BOS Volume 08.03.
  • D7492/D7492M - Standard Guide for Use of Drainage System Media with Waterproofing Systems has been revised to D7492/D7492M-16 developed by Committee D08.22, ASTM BOS Volume 04.04.
  • D7548 - Standard Test Method for Determination of Accelerated Iron Corrosion in Petroleum Products has been revised to D7548-15 developed by Committee D02.14, ASTM BOS Volume 05.04.
  • D7812 - Standard Test Method for Tensile Testing of Aramid Paper is a new standard, now available. D7812-16 developed by Committee D13.19, ASTM BOS Volume 07.02.
  • D7984 - Standard Test Method for Measurement of Thermal Effusivity of Fabrics Using a Modified Transient Plane Source (MTPS) Instrument is a new standard, now available. D7984-16 developed by Committee D13.51, ASTM BOS Volume 07.02.
  • D8006 - Standard Guide for Sampling and Analysis of Residential and Commercial Water Supply Wells in Areas of Exploration and Production (E&P) Operations is a new standard, now available. D8006-16 developed by Committee D18.26, ASTM BOS Volume 04.09.
  • D8007 - Standard Test Method for Wale and Course Count of Weft Knitted Fabrics has been editorially changed, available as D8007-15e1 developed by Committee D13.59, ASTM BOS Volume 07.02.
  • D8026 - Standard Practice for Determination of Tc-99 in Water by Inductively Coupled Plasma Mass Spectrometry (ICP-MS) is a new standard, now available. D8026-16 developed by Committee D19.04, ASTM BOS Volume 11.02.
  • D8029 - Standard Specification for Biodegradable, Low Aquatic Toxicity Hydraulic Fluids is a new standard, now available. D8029-16 developed by Committee D02.N0, ASTM BOS Volume 05.04.
  • E6 - Standard Terminology Relating to Methods of Mechanical Testing has been revised to E6-15 developed by Committee E28.91, ASTM BOS Volume 03.01.
  • E32 - Standard Practices for Sampling Ferroalloys and Steel Additives for Determination of Chemical Composition has been reinstated as E32-15 developed by Committee E01.01, ASTM BOS Volume 03.05.
  • E92 - Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials has been reinstated as E92-16 developed by Committee E28.06, ASTM BOS Volume 03.01.
  • E384 - Standard Test Method for Microindentation Hardness of Materials has been revised (with title change) to E384-16 developed by Committee E04.05, ASTM BOS Volume 03.01.
  • E415 - Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry has been revised to E415-15 developed by Committee E01.01, ASTM BOS Volume 03.05.
  • E520 - Standard Practice for Describing Photomultiplier Detectors in Emission and Absorption Spectrometry has been reapproved (with editorial change), available as E520-08(2015)e1 developed by Committee E01.20, ASTM BOS Volume 03.05.
  • E570 - Standard Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products has been editorially changed, available as E570-15e1 developed by Committee E07.07, ASTM BOS Volume 03.03.
  • E646 - Standard Test Method for Tensile Strain-Hardening Exponents (n -Values) of Metallic Sheet Materials has been revised to E646-16 developed by Committee E28.02, ASTM BOS Volume 03.01.
  • E748 - Standard Guide for Thermal Neutron Radiography of Materials has been revised (with title change) to E748-16 developed by Committee E07.05, ASTM BOS Volume 03.03.
  • E1010 - Standard Practice for Preparation of Disk Specimens of Steel and Iron by Remelting for Spectrochemical Analysis has been revised (with title change) to E1010-16 developed by Committee E01.01, ASTM BOS Volume 03.05.
  • E1163 - Standard Test Method for Estimating Acute Oral Toxicity in Rats has been reapproved, available as E1163-10(2016) developed by Committee E50.47, ASTM BOS Volume 11.06.
  • E1268 - Standard Practice for Assessing the Degree of Banding or Orientation of Microstructures has been reapproved, available as E1268-01(2016) developed by Committee E04.14, ASTM BOS Volume 03.01.
  • E1325 - Standard Terminology Relating to Design of Experiments has been revised to E1325-15 developed by Committee E11.10, ASTM BOS Volume 14.05.
  • E1354 - Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter has been revised to E1354-16 developed by Committee E05.21, ASTM BOS Volume 04.07.
  • E1588 - Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/Energy Dispersive X-Ray Spectrometry has been revised to E1588-16 developed by Committee E30.01, ASTM BOS Volume 14.02.
  • E1765 - Standard Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Projects, Products, and Processes has been revised (with title change) to E1765-16 developed by Committee E06.81, ASTM BOS Volume 04.11.
  • E1806 - Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition has been reapproved, available as E1806-09(2016) developed by Committee E01.01, ASTM BOS Volume 03.05.
  • E1843 - Standard Guide for Sexual Assault Investigation, Examination, and Evidence Collection has been revised to E1843-16 developed by Committee E30.01, ASTM BOS Volume 14.02.
  • E1876 - Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration has been revised to E1876-15 developed by Committee E28.04, ASTM BOS Volume 03.01.
  • E1921 - Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range has been editorially changed, available as E1921-15ae1 developed by Committee E08.07, ASTM BOS Volume 03.01.
  • E2059 - Standard Practice for Application and Analysis of Nuclear Research Emulsions for Fast Neutron Dosimetry has been editorially changed, available as E2059-15e1 developed by Committee E10.05, ASTM BOS Volume 12.02.
  • E2112 - Standard Practice for Installation of Exterior Windows, Doors and Skylights has been reapproved, available as E2112-07(2016) developed by Committee E06.51, ASTM BOS Volume 04.12.
  • E2257 - Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies has been revised to E2257-16 developed by Committee E05.21, ASTM BOS Volume 04.07.
  • E2309/E2309M - Standard Practices for Verification of Displacement Measuring Systems and Devices Used in Material Testing Machines has been revised to E2309/E2309M-16 developed by Committee E28.01, ASTM BOS Volume 03.01.
  • E2315 - Standard Guide for Assessment of Antimicrobial Activity Using a Time-Kill Procedure has been revised to E2315-16 developed by Committee E35.15, ASTM BOS Volume 11.08.
  • E2353 - Standard Test Methods for Performance of Glazing in Permanent Railing Systems, Guards, and Balustrades has been revised to E2353-16 developed by Committee E06.56, ASTM BOS Volume 04.12.
  • E2469 - Standard Test Method for Chloride in Mono-, Di- and Tri-ethylene Glycol by Ion Chromatography has been revised to E2469-16 developed by Committee E15.02, ASTM BOS Volume 15.05.
  • E2552 - Standard Guide for Assessing the Environmental and Human Health Impacts of New Compounds for Military Use has been revised (with title change) to E2552-16 developed by Committee E50.47, ASTM BOS Volume 11.06.
  • E2744 - Standard Test Method for Pressure Calibration of Thermal Analyzers has been revised to E2744-16 developed by Committee E37.10, ASTM BOS Volume 14.05.
  • E2880 - Standard Terminology Related to Biorationals has been revised to E2880-16 developed by Committee E35.22, ASTM BOS Volume 11.08.
  • E2987/E2987M - Standard Terminology for Sustainable Manufacturing is a new standard, now available. E2987/E2987M-16 developed by Committee E60.13, ASTM BOS Volume 04.12.
  • E3012 - Standard Guide for Characterizing Environmental Aspects of Manufacturing Processes is a new standard, now available. E3012-16 developed by Committee E60.13, ASTM BOS Volume 04.12.
  • E3046 - Standard Guide for Core Competencies for Mobile Phone Forensics is a new standard, now available. E3046-15 developed by Committee E30.12, ASTM BOS Volume 14.02.
  • F404 - Standard Consumer Safety Specification for High Chairs has been revised to F404-16 developed by Committee F15.16, ASTM BOS Volume 15.11.
  • F449 - Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control has been revised to F449-16 developed by Committee F17.65, ASTM BOS Volume 08.04.
  • F667/F667M - Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings has been revised to F667/F667M-16 developed by Committee F17.65, ASTM BOS Volume 08.04.
  • F697 - Standard Practice for Care and Use of Athletic Mouth Protectors has been reinstated as F697-16 developed by Committee F08.53, ASTM BOS Volume 15.07.
  • F1193 - Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices has been revised to F1193-16 developed by Committee F24.24, ASTM BOS Volume 15.07.
  • F1356 - Standard Guide for Irradiation of Fresh, Frozen or Processed Meat and Poultry to Control Pathogens and Other Microorganisms has been revised (with title change) to F1356-16 developed by Committee E61.05, ASTM BOS Volume 12.02.
  • F1359/F1359M - Standard Test Method for Liquid Penetration Resistance of Protective Clothing or Protective Ensembles Under a Shower Spray While on a Manikin has been revised (with title change) to F1359/F1359M-16 developed by Committee F23.30, ASTM BOS Volume 11.03.
  • F1412 - Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems has been revised to F1412-16 developed by Committee F17.63, ASTM BOS Volume 08.04.
  • F2050 - Standard Consumer Safety Specification for Hand-Held Infant Carriers has been revised to F2050-16 developed by Committee F15.21, ASTM BOS Volume 15.11.
  • F2204/F2204M - Standard Guide for Describing Shoreline and Inland Response Techniques has been revised (with title change) to F2204/F2204M-16 developed by Committee F20.17, ASTM BOS Volume 11.08.
  • F2245 - Standard Specification for Design and Performance of a Light Sport Airplane has been revised to F2245-16 developed by Committee F37.20, ASTM BOS Volume 15.11.
  • F2282 - Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners has been revised to F2282-15 developed by Committee F16.93, ASTM BOS Volume 01.08.
  • F2465/F2465M - Standard Guide for Oil Spill Dispersant Application Equipment: Single-point Spray Systems has been reapproved, available as F2465/F2465M-05(2016) developed by Committee F20.13, ASTM BOS Volume 11.08.
  • F2678 - Standard Practice for Preparing Panel Underlayments, Thick Poured Gypsum Concrete Underlayments, Thick Poured Lightweight Cellular Concrete Underlayments, and Concrete Subfloors with Underlayment Patching Compounds to Receive Resilient Flooring has been revised to F2678-16 developed by Committee F06.40, ASTM BOS Volume 15.04.
  • F2786 - Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Gaseous Testing Media Under Pressure (Pneumatic Leak Testing) has been revised (with title change) to F2786-16 developed by Committee F17.40, ASTM BOS Volume 08.04.
  • F2848 - Standard Specification for Medical-Grade Ultra-High Molecular Weight Polyethylene Yarns has been revised to F2848-16 developed by Committee F04.11, ASTM BOS Volume 13.02.
  • F2908 - Standard Specification for Aircraft Flight Manual (AFM) for a Small Unmanned Aircraft System (sUAS) has been revised to F2908-16 developed by Committee F38.03, ASTM BOS Volume 15.11.
  • F3033 - Standard Practice for Installation of a Single-Sized, Cured-In-Place Liner Utilizing an Inflatable Bladder for Resurfacing Manhole Walls of Various Shapes and Sizes is a new standard, now available. F3033-16 developed by Committee F17.67, ASTM BOS Volume 08.04.
  • F3057 - Standard Test Method for Electromagnetic Shielding Effectiveness of Glazings has been revised to F3057-16 developed by Committee F12.10, ASTM BOS Volume 15.08.
  • F3058 - Standard Practice for Preliminary Field Testing of Thermoplastic Pipe Joints for Gravity Flow (Non-Pressure) Sewer Lines is a new standard, now available. F3058-16 developed by Committee F17.40, ASTM BOS Volume 08.04.
  • F3063/F3063M - Standard Specification for Design and Integration of Fuel/Energy Storage and Delivery System Installations for Aeroplanes has been revised to F3063/F3063M-16 developed by Committee F44.40, ASTM BOS Volume 15.11.
  • F3082/F3082M - Standard Specification for Flight for General Aviation Aeroplanes is a new standard, now available. F3082/F3082M-16 developed by Committee F44.20, ASTM BOS Volume 15.11.
  • F3125/F3125M - Standard Specification for High Strength Structural Bolts, Steel and Alloy Steel, Heat Treated, 120 ksi (830 MPa) and 150 ksi (1040 MPa) Minimum Tensile Strength, Inch and Metric Dimensions has been revised to F3125/F3125M-15a developed by Committee F16.02, ASTM BOS Volume 01.08.
  • F3141 - Standard Guide for Total Knee Replacement Loading Profiles is a new standard, now available. F3141-15 developed by Committee F04.22, ASTM BOS Volume 13.02.
  • F3161 - Standard Test Method for Finite Element Analysis (FEA) of Metallic Orthopaedic Total Knee Femoral Components under Closing Conditions is a new standard, now available. F3161-16 developed by Committee F04.22, ASTM BOS Volume 13.02.
  • F3165 - Standard Specification for Throat Protective Equipment for Hockey Goaltenders is a new standard, now available. F3165-16 developed by Committee F08.15, ASTM BOS Volume 15.07.
  • F3172 - Standard Guide for Design Verification Device Size and Sample Size Selection for Endovascular Devices is a new standard, now available. F3172-15 developed by Committee F04.30, ASTM BOS Volume 13.02.
  • F3179/F3179M - Standard Specification for Performance of Aeroplanes is a new standard, now available. F3179/F3179M-16 developed by Committee F44.20, ASTM BOS Volume 15.11.
  • F3180/F3180M - Standard Specification for Low-Speed Flight Characteristics of Aeroplanes is a new standard, now available. F3180/F3180M-16 developed by Committee F44.20, ASTM BOS Volume 15.11.
  • F3181 - Standard Test Method for The Un-notched, Constant Ligament Stress Crack Test (UCLS) for HDPE Materials Containing Post- Consumer Recycled HDPE is a new standard, now available. F3181-16 developed by Committee F17.40, ASTM BOS Volume 08.04.
  • G32 - Standard Test Method for Cavitation Erosion Using Vibratory Apparatus has been revised to G32-16 developed by Committee G02.10, ASTM BOS Volume 03.02.
  • G65 - Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus has been revised to G65-16 developed by Committee G02.30, ASTM BOS Volume 03.02.
  • G214 - Standard Test Method for Integration of Digital Spectral Data for Weathering and Durability Applications is a new standard, now available. G214-15 developed by Committee G03.09, ASTM BOS Volume 14.04.

Published in international.