ASTM publications

Here are recent publications from ASTM International. To purchase ASTM standards in hard copy or PDF format, please call 0800 782 632 during business hours or email enquiries@standards.govt.nz.

  • A6/A6M - Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling has been revised to A6/A6M-16 developed by Committee A01.02, ASTM BOS Volume 01.04.
  • A240/A240M - Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications has been revised to A240/A240M-16 developed by Committee A01.17, ASTM BOS Volume 01.03.
  • A276/A276M - Standard Specification for Stainless Steel Bars and Shapes has been revised to A276/A276M-16a developed by Committee A01.17, ASTM BOS Volume 01.03.
  • A325 - Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength (Withdrawn 2016) has been withdrawn and replaced by F3125/F3125M developed by Committee F16.02, ASTM BOS Volume 01.08.
  • A325M - Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength (Metric) (Withdrawn 2016) has been withdrawn and replaced by F3125/F3125M developed by Committee F16.02, ASTM BOS Volume 01.08.
  • A340 - Standard Terminology of Symbols and Definitions Relating to Magnetic Testing has been revised to A340-16 developed by Committee A06.92, ASTM BOS Volume 03.04.
  • A341/A341M - Standard Test Method for Direct Current Magnetic Properties of Soft Magnetic Materials Using D-C Permeameters and the Point by Point (Ballistic) Test Methods has been revised (with title change) to A341/A341M-16 developed by Committee A06.01, ASTM BOS Volume 03.04.
  • A351/A351M - Standard Specification for Castings, Austenitic, for Pressure-Containing Parts has been revised to A351/A351M-16 developed by Committee A01.18, ASTM BOS Volume 01.02.
  • A370 - Standard Test Methods and Definitions for Mechanical Testing of Steel Products has been revised to A370-16 developed by Committee A01.13, ASTM BOS Volume 01.03.
  • A388/A388M - Standard Practice for Ultrasonic Examination of Steel Forgings has been revised to A388/A388M-16 developed by Committee A01.06, ASTM BOS Volume 01.05.
  • A424/A424M - Standard Specification for Steel, Sheet, for Porcelain Enameling has been reapproved, available as A424/A424M-09a(2016) developed by Committee A01.19, ASTM BOS Volume 01.03.
  • A473 - Standard Specification for Stainless Steel Forgings has been revised to A473-16 developed by Committee A01.06, ASTM BOS Volume 01.05.
  • A479/A479M - Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels has been revised to A479/A479M-16a developed by Committee A01.17, ASTM BOS Volume 01.03.
  • A490 - Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength (Withdrawn 2016) has been withdrawn and replaced by F3125/F3125M developed by Committee F16.02, ASTM BOS Volume 01.08.
  • A490M - Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric) (Withdrawn 2016) has been withdrawn and replaced by F3125/F3125M developed by Committee F16.02, ASTM BOS Volume 01.08.
  • A506 - Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled has been revised to A506-16 developed by Committee A01.19, ASTM BOS Volume 01.03.
  • A507 - Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled has been revised to A507-16 developed by Committee A01.19, ASTM BOS Volume 01.03.
  • A511/A511M - Standard Specification for Seamless Stainless Steel Mechanical Tubing and Hollow Bar has been revised (with title change) to A511/A511M-16 developed by Committee A01.10, ASTM BOS Volume 01.01.
  • A550 - Standard Specification for Ferrocolumbium (Ferroniobium) has been revised (with title change) to A550-16 developed by Committee A01.18, ASTM BOS Volume 01.02.
  • A600 - Standard Specification for Tool Steel High Speed has been reapproved, available as A600-92a(2016) developed by Committee A01.29, ASTM BOS Volume 01.05.
  • A671/A671M - Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures has been revised to A671/A671M-16 developed by Committee A01.09, ASTM BOS Volume 01.01.
  • A686 - Standard Specification for Tool Steel, Carbon has been reapproved, available as A686-92(2016) developed by Committee A01.29, ASTM BOS Volume 01.05.
  • A709/A709M - Standard Specification for Structural Steel for Bridges has been revised to A709/A709M-16a developed by Committee A01.02, ASTM BOS Volume 01.04.
  • A747/A747M - Standard Specification for Steel Castings, Stainless, Precipitation Hardening has been revised to A747/A747M-16a developed by Committee A01.18, ASTM BOS Volume 01.02.
  • A754/A754M - Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence has been reapproved, available as A754/A754M-11(2016) developed by Committee A05.07, ASTM BOS Volume 01.06.
  • A755/A755M - Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products has been editorially changed, available as A755/A755M-16e1 developed by Committee A05.11, ASTM BOS Volume 01.06.
  • A761/A761M - Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches has been revised to A761/A761M-16 developed by Committee A05.17, ASTM BOS Volume 01.06.
  • A775/A775M - Standard Specification for Epoxy-Coated Steel Reinforcing Bars has been revised to A775/A775M-16 developed by Committee A01.05, ASTM BOS Volume 01.04.
  • A778/A778M - Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products has been revised to A778/A778M-16 developed by Committee A01.10, ASTM BOS Volume 01.01.
  • A805/A805M - Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled has been reapproved, available as A805/A805M-09(2016) developed by Committee A01.19, ASTM BOS Volume 01.03.
  • A820/A820M - Standard Specification for Steel Fibers for Fiber-Reinforced Concrete has been revised to A820/A820M-16 developed by Committee A01.05, ASTM BOS Volume 01.04.
  • A877/A877M - Standard Specification for Steel Wire, Chromium-Silicon Alloys, Chrome-Silicon-Vanadium Alloy Valve Spring Quality has been revised to A877/A877M-16 developed by Committee A01.03, ASTM BOS Volume 01.03.
  • A891/A891M - Standard Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels has been revised to A891/A891M-16 developed by Committee A01.06, ASTM BOS Volume 01.05.
  • A924/A924M - Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process has been revised to A924/A924M-16a developed by Committee A05.11, ASTM BOS Volume 01.06.
  • A924/A924M - Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process has been editorially changed, available as A924/A924M-16ae1 developed by Committee A05.11, ASTM BOS Volume 01.06.
  • A926 - Standard Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated Metal Pipe (Withdrawn 2016) has been withdrawn, with no replacement. A926- developed by Committee A05.17, ASTM BOS Volume 01.06.
  • A960/A960M - Standard Specification for Common Requirements for Wrought Steel Piping Fittings has been revised to A960/A960M-16 developed by Committee A01.22, ASTM BOS Volume 01.01.
  • A961/A961M - Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications has been revised to A961/A961M-16 developed by Committee A01.22, ASTM BOS Volume 01.01.
  • A962/A962M - Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range has been revised to A962/A962M-16a developed by Committee A01.22, ASTM BOS Volume 01.01.
  • A970/A970M - Standard Specification for Headed Steel Bars for Concrete Reinforcement has been revised to A970/A970M-16 developed by Committee A01.05, ASTM BOS Volume 01.04.
  • A974 - Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic-Coated or Polyvinyl Chloride (PVC) Coated) has been reapproved, available as A974-97(2016) developed by Committee A05.12, ASTM BOS Volume 01.06.
  • A975 - Standard Specification for Double–Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating) has been reapproved, available as A975-11(2016) developed by Committee A05.12, ASTM BOS Volume 01.06.
  • A988/A988M - Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service has been revised to A988/A988M-16 developed by Committee A01.22, ASTM BOS Volume 01.01.
  • A994 - Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys has been revised to A994-16 developed by Committee A01.91, ASTM BOS Volume 01.01.
  • A1014/A1014M - Standard Specification for Precipitation-Hardening Bolting (UNS N07718) for High Temperature Service has been revised to A1014/A1014M-16 developed by Committee A01.22, ASTM BOS Volume 01.01.
  • A1018/A1018M - Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength has been revised to A1018/A1018M-16 developed by Committee A01.19, ASTM BOS Volume 01.03.
  • A1022/A1022M - Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement has been revised to A1022/A1022M-16a developed by Committee A01.05, ASTM BOS Volume 01.04.
  • A1030/A1030M - Standard Practice for Measuring Flatness Characteristics of Steel Sheet Products has been revised to A1030/A1030M-16 developed by Committee A05.07, ASTM BOS Volume 01.06.
  • A1044/A1044M - Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete has been revised to A1044/A1044M-16a developed by Committee A01.05, ASTM BOS Volume 01.04.
  • A1060/A1060M - Standard Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed, for Concrete has been revised to A1060/A1060M-16a developed by Committee A01.05, ASTM BOS Volume 01.04.
  • A1064/A1064M - Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete has been revised to A1064/A1064M-16a developed by Committee A01.05, ASTM BOS Volume 01.04.
  • A1073/A1073M - Standard Practice for Using Hand Micrometers to Measure the Thickness of Uncoated Steel Sheet and Nonmetallic and Metallic-Coated Steel Sheet has been revised (with title change) to A1073/A1073M-16 developed by Committee A05.07, ASTM BOS Volume 01.06.
  • A1082/A1082M - Standard Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications has been revised to A1082/A1082M-16 developed by Committee A01.22, ASTM BOS Volume 01.01.
  • A1087/A1087M - Standard Practice for Using Hand Calipers to Measure the Width of Steel Sheet has been revised to A1087/A1087M-16 developed by Committee A05.07, ASTM BOS Volume 01.06.
  • A1091/A1091M - Standard Specification for Steel Castings, Creep-Strength Enhanced Ferritic Alloy, for Pressure-Containing Parts, Suitable for High Temperature Service is a new standard, now available. A1091/A1091M-16 developed by Committee A01.18, ASTM BOS Volume 01.02.
  • B167 - Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Seamless Pipe and Tube has been reapproved, available as B167-11(2016) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B168 - Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Plate, Sheet, and Strip has been reapproved, available as B168-11(2016) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B187/B187M - Standard Specification for Copper, Bus Bar, Rod, and Shapes and General Purpose Rod, Bar, and Shapes has been revised to B187/B187M-16 developed by Committee B05.02, ASTM BOS Volume 02.01.
  • B216 - Standard Specification for Tough-Pitch Fire-Refined Copper—Refinery Shapes has been revised to B216-16 developed by Committee B05.07, ASTM BOS Volume 02.01.
  • B283/B283M - Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed) has been revised to B283/B283M-16 developed by Committee B05.02, ASTM BOS Volume 02.01.
  • B349/B349M - Standard Specification for Zirconium Sponge and Other Forms of Virgin Metal for Nuclear Application has been revised to B349/B349M-16 developed by Committee B10.02, ASTM BOS Volume 02.04.
  • B361 - Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings has been revised to B361-16 developed by Committee B07.03, ASTM BOS Volume 02.02.
  • B362 - Standard Test Method for Mechanical Torque Rate of Spiral Coils of Thermostat Metal has been reapproved, available as B362-91(2016) developed by Committee B02.10, ASTM BOS Volume 02.04.
  • B366/B366M - Standard Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings has been revised to B366/B366M-16 developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B389 - Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal has been reapproved, available as B389-81(2016) developed by Committee B02.10, ASTM BOS Volume 02.04.
  • B408 - Standard Specification for Nickel-Iron-Chromium Alloy Rod and Bar has been reapproved, available as B408-06(2016) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B409 - Standard Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip has been reapproved, available as B409-06(2016) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B415 - Standard Specification for Hard-Drawn Aluminum-Clad Steel Wire has been revised to B415-16 developed by Committee B01.06, ASTM BOS Volume 02.03.
  • B423 - Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825, N08221, and N06845) Seamless Pipe and Tube has been reapproved, available as B423-11(2016) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B424 - Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825, UNS N08221, and UNS N06845) Plate, Sheet, and Strip has been reapproved, available as B424-11(2016) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B434 - Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, UNS N10242) Plate, Sheet, and Strip has been reapproved, available as B434-06(2016) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B435 - Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Plate, Sheet, and Strip has been reapproved, available as B435-06(2016) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B444 - Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube has been revised to B444-16 developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B463 - Standard Specification for UNS N08020 Alloy Plate, Sheet, and Strip has been reapproved, available as B463-10(2016) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B468 - Standard Specification for Welded UNS N08020 Alloy Tubes has been reapproved, available as B468-10(2016) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B478 - Standard Test Method for Cross Curvature of Thermostat Metals has been reapproved, available as B478-85(2016) developed by Committee B02.10, ASTM BOS Volume 02.04.
  • B496 - Standard Specification for Compact Round Concentric-Lay-Stranded Copper Conductors has been revised to B496-16 developed by Committee B01.04, ASTM BOS Volume 02.03.
  • B508 - Standard Specification for Copper Alloy Strip for Flexible Metal Hose has been revised to B508-16 developed by Committee B05.01, ASTM BOS Volume 02.01.
  • B511/B511M - Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Bars and Shapes has been revised (with designation change) to B511/B511M-16 developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B572 - Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Rod has been reapproved, available as B572-06(2016) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B573 - Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, N10242) Rod has been reapproved, available as B573-06(2016) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B576 - Standard Guide for Arc Erosion Testing of Electrical Contact Materials has been reapproved, available as B576-94(2016) developed by Committee B02.05, ASTM BOS Volume 02.04.
  • B595 - Standard Specification for Sintered Aluminum Structural Parts has been reapproved, available as B595-11(2016) developed by Committee B09.05, ASTM BOS Volume 02.05.
  • B614 - Standard Practice for Descaling and Cleaning Zirconium and Zirconium Alloy Surfaces has been revised to B614-16 developed by Committee B10.02, ASTM BOS Volume 02.04.
  • B617 - Standard Specification for Coin Silver Electrical Contact Alloy has been reapproved, available as B617-98(2016) developed by Committee B02.05, ASTM BOS Volume 02.04.
  • B621 - Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod has been reapproved, available as B621-02(2016) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B628 - Standard Specification for Silver-Copper Eutectic Electrical Contact Alloy has been reapproved, available as B628-98(2016) developed by Committee B02.05, ASTM BOS Volume 02.04.
  • B631 - Standard Specification for Silver-Tungsten Electrical Contact Materials has been reapproved, available as B631-93(2016) developed by Committee B02.05, ASTM BOS Volume 02.04.
  • B647 - Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage has been reapproved, available as B647-10(2016) developed by Committee B07.05, ASTM BOS Volume 02.02.
  • B649 - Standard Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, UNS N08354, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire, and Ni-Cr-Fe-Mo-N Alloy (UNS N08936) Wire has been reapproved, available as B649-06(2016) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B653/B653M - Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Welding Fittings has been reapproved, available as B653/B653M-11(2016) developed by Committee B10.02, ASTM BOS Volume 02.04.
  • B658/B658M - Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe has been reapproved, available as B658/B658M-11(2016) developed by Committee B10.02, ASTM BOS Volume 02.04.
  • B663/B663M - Standard Specification for Silver-Tungsten Carbide Electrical Contact Material has been revised (with designation change) to B663/B663M-16 developed by Committee B02.05, ASTM BOS Volume 02.04.
  • B673 - Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe has been reapproved, available as B673-05(2016) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B674 - Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Tube has been reapproved, available as B674-05(2016) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B677 - Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Seamless Pipe and Tube has been reapproved, available as B677-05(2016) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B684/B684M - Standard Specification for Platinum-Iridium Electrical Contact Materials has been revised (with designation change) to B684/B684M-16 developed by Committee B02.05, ASTM BOS Volume 02.04.
  • B718 - Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip has been reapproved, available as B718-00(2016) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B722 - Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Seamless Pipe and Tube has been reapproved, available as B722-06(2016) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B726 - Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Tube has been reapproved, available as B726-02(2016) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B755 - Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Plate, Sheet, and Strip has been reapproved, available as B755-00(2016) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B756 - Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloy(UNS N06110) Rod and Bar has been reapproved, available as B756-00(2016) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B757 - Standard Specification for Nickel-Chromium-Molybdenum-Tungsten-Alloys (UNS N06110) Welded Pipe has been reapproved, available as B757-00(2016) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B758 - Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Welded Tube has been reapproved, available as B758-00(2016) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B759 - Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Pipe and Tube has been reapproved, available as B759-00(2016) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B775/B775M - Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Pipe has been revised (with designation change) to B775/B775M-16 developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B780 - Standard Specification for 75 % Silver, 24.5 % Copper, 0.5 % Nickel Electrical Contact Alloy has been revised to B780-16 developed by Committee B02.05, ASTM BOS Volume 02.04.
  • B789/B789M - Standard Practice for Installing Corrugated Aluminum Structural Plate Pipe for Culverts and Sewers has been revised to B789/B789M-16 developed by Committee B07.08, ASTM BOS Volume 02.02.
  • B792 - Standard Specification for Zinc Alloys in Ingot Form for Slush Casting has been revised to B792-16 developed by Committee B02.04, ASTM BOS Volume 02.04.
  • B793 - Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds has been revised to B793-16 developed by Committee B02.04, ASTM BOS Volume 02.04.
  • B801 - Standard Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation has been revised to B801-16 developed by Committee B01.07, ASTM BOS Volume 02.03.
  • B813 - Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube has been revised to B813-16 developed by Committee B05.04, ASTM BOS Volume 02.01.
  • B814 - Standard Specification for Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy(UNS N06920) Plate, Sheet, and Strip has been reapproved, available as B814-06(2016) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B815 - Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod has been reapproved, available as B815-02(2016) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B828 - Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings has been revised to B828-16 developed by Committee B05.04, ASTM BOS Volume 02.01.
  • B844 - Standard Guide for Silver-Tin Oxide Contact Material has been reapproved, available as B844-98(2016) developed by Committee B02.05, ASTM BOS Volume 02.04.
  • B854 - Standard Guide for Measuring Electrical Contact Intermittences has been reapproved, available as B854-98(2016) developed by Committee B02.11, ASTM BOS Volume 02.04.
  • B872 - Standard Specification for Precipitation-Hardening Nickel Alloys Plate, Sheet, and Strip has been reapproved, available as B872-06(2016) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B898 - Standard Specification for Reactive and Refractory Metal Clad Plate has been reapproved, available as B898-11(2016) developed by Committee B10.01, ASTM BOS Volume 02.04.
  • B941 - Standard Specification for Heat Resistant Aluminum-Zirconium Alloy Wire for Electrical Purposes has been revised to B941-16 developed by Committee B01.07, ASTM BOS Volume 02.03.
  • B950 - Standard Guide for Editorial Procedures and Form of Product Specifications for Copper and Copper Alloys has been revised to B950-16 developed by Committee B05.91, ASTM BOS Volume 02.01.
  • B964 - Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel has been revised to B964-16 developed by Committee B09.02, ASTM BOS Volume 02.05.
  • B1002 - Standard Specification for Refined Indium is a new standard, now available. B1002-16 developed by Committee B02.05, ASTM BOS Volume 02.04.
  • C11 - Standard Terminology Relating to Gypsum and Related Building Materials and Systems has been revised to C11-16 developed by Committee C11.91, ASTM BOS Volume 04.01.
  • C12 - Standard Practice for Installing Vitrified Clay Pipe Lines has been revised to C12-16 developed by Committee C04.20, ASTM BOS Volume 04.05.
  • C25 - Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime has been editorially changed, available as C25-11e2 developed by Committee C07.05, ASTM BOS Volume 04.01.
  • C110 - Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone has been editorially changed, available as C110-15e1 developed by Committee C07.06, ASTM BOS Volume 04.01.
  • C119 - Standard Terminology Relating to Dimension Stone has been revised to C119-16 developed by Committee C18.91, ASTM BOS Volume 04.07.
  • C134 - Standard Test Methods for Size, Dimensional Measurements, and Bulk Density of Refractory Brick and Insulating Firebrick has been reapproved, available as C134-95(2016) developed by Committee C08.03, ASTM BOS Volume 15.01.
  • C150/C150M - Standard Specification for Portland Cement has been editorially changed, available as C150/C150M-16e1 developed by Committee C01.10, ASTM BOS Volume 04.01.
  • C169 - Standard Test Methods for Chemical Analysis of Soda-Lime and Borosilicate Glass has been revised to C169-16 developed by Committee C14.02, ASTM BOS Volume 15.02.
  • C174/C174M - Standard Test Method for Measuring Thickness of Concrete Elements Using Drilled Concrete Cores has been revised to C174/C174M-16 developed by Committee C09.61, ASTM BOS Volume 04.02.
  • C192/C192M - Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory has been revised to C192/C192M-16a developed by Committee C09.61, ASTM BOS Volume 04.02.
  • C199 - Standard Test Method for Pier Test for Refractory Mortars has been reapproved, available as C199-84(2016) developed by Committee C08.01, ASTM BOS Volume 15.01.
  • C293/C293M - Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading) has been revised to C293/C293M-16 developed by Committee C09.61, ASTM BOS Volume 04.02.
  • C323 - Standard Test Methods for Chemical Analysis of Ceramic Whiteware Clays has been reapproved, available as C323-56(2016) developed by Committee C21.04, ASTM BOS Volume 15.02.
  • C329 - Standard Test Method for Specific Gravity of Fired Ceramic Whiteware Materials has been reapproved, available as C329-88(2016) developed by Committee C21.03, ASTM BOS Volume 15.02.
  • C365/C365M - Standard Test Method for Flatwise Compressive Properties of Sandwich Cores has been revised to C365/C365M-16 developed by Committee D30.09, ASTM BOS Volume 15.03.
  • C367/C367M - Standard Test Methods for Strength Properties of Prefabricated Architectural Acoustical Tile or Lay-In Ceiling Panels has been revised to C367/C367M-16 developed by Committee E33.04, ASTM BOS Volume 04.06.
  • C368 - Standard Test Method for Impact Resistance of Ceramic Tableware has been reapproved, available as C368-88(2016) developed by Committee C21.03, ASTM BOS Volume 15.02.
  • C408 - Standard Test Method for Thermal Conductivity of Whiteware Ceramics has been reapproved, available as C408-88(2016) developed by Committee C21.03, ASTM BOS Volume 15.02.
  • C497 - Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile has been revised to C497-16 developed by Committee C13.09, ASTM BOS Volume 04.05.
  • C497M - Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile (Metric) has been revised to C497M-16 developed by Committee C13.09, ASTM BOS Volume 04.05.
  • C535 - Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine has been revised to C535-16 developed by Committee C09.20, ASTM BOS Volume 04.02.
  • C554 - Standard Test Method for Crazing Resistance of Fired Glazed Ceramic Whitewares by a Thermal Shock Method has been reapproved, available as C554-93(2016) developed by Committee C21.03, ASTM BOS Volume 15.02.
  • C584 - Standard Test Method for Specular Gloss of Glazed Ceramic Whitewares and Related Products has been reapproved, available as C584-81(2016) developed by Committee C21.03, ASTM BOS Volume 15.02.
  • C585 - Standard Practice for Inner and Outer Diameters of Thermal Insulation for Nominal Sizes of Pipe and Tubing has been reapproved, available as C585-10(2016) developed by Committee C16.20, ASTM BOS Volume 04.06.
  • C592 - Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type) has been revised to C592-16 developed by Committee C16.23, ASTM BOS Volume 04.06.
  • C597 - Standard Test Method for Pulse Velocity Through Concrete has been revised to C597-16 developed by Committee C09.64, ASTM BOS Volume 04.02.
  • C607 - Standard Practice for Coking Large Shapes of Carbon-Bearing Materials has been reapproved, available as C607-88(2016) developed by Committee C08.04, ASTM BOS Volume 15.01.
  • C697 - Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Plutonium Dioxide Powders and Pellets has been revised to C697-16 developed by Committee C26.05, ASTM BOS Volume 12.01.
  • C698 - Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Mixed Oxides ((U, Pu)O2) has been revised to C698-16 developed by Committee C26.05, ASTM BOS Volume 12.01.
  • C738 - Standard Test Method for Lead and Cadmium Extracted from Glazed Ceramic Surfaces has been reapproved, available as C738-94(2016) developed by Committee C21.03, ASTM BOS Volume 15.02.
  • C770 - Standard Test Method for Measurement of Glass Stress—Optical Coefficient has been revised to C770-16 developed by Committee C14.04, ASTM BOS Volume 15.02.
  • C773 - Standard Test Method for Compressive (Crushing) Strength of Fired Whiteware Materials has been reapproved, available as C773-88(2016) developed by Committee C21.03, ASTM BOS Volume 15.02.
  • C827/C827M - Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures has been revised to C827/C827M-16 developed by Committee C09.68, ASTM BOS Volume 04.02.
  • C830 - Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure has been reapproved, available as C830-00(2016) developed by Committee C08.03, ASTM BOS Volume 15.01.
  • C848 - Standard Test Method for Young’s Modulus, Shear Modulus, and Poisson’s Ratio For Ceramic Whitewares by Resonance has been reapproved, available as C848-88(2016) developed by Committee C21.03, ASTM BOS Volume 15.02.
  • C849 - Standard Test Method for Knoop Indentation Hardness of Ceramic Whitewares has been reapproved, available as C849-88(2016) developed by Committee C21.03, ASTM BOS Volume 15.02.
  • C863 - Standard Test Method for Evaluating Oxidation Resistance of Silicon Carbide Refractories at Elevated Temperatures has been reapproved, available as C863-00(2016) developed by Committee C08.04, ASTM BOS Volume 15.01.
  • C866 - Standard Test Method for Filtration Rate of Ceramic Whiteware Clays has been reapproved, available as C866-11(2016) developed by Committee C21.04, ASTM BOS Volume 15.02.
  • C947 - Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading) has been reapproved, available as C947-03(2016) developed by Committee C27.40, ASTM BOS Volume 04.05.
  • C948 - Standard Test Method for Dry and Wet Bulk Density, Water Absorption, and Apparent Porosity of Thin Sections of Glass-Fiber Reinforced Concrete has been reapproved, available as C948-81(2016) developed by Committee C27.40, ASTM BOS Volume 04.05.
  • C991 - Standard Specification for Flexible Fibrous Glass Insulation for Metal Buildings has been revised to C991-16 developed by Committee C16.23, ASTM BOS Volume 04.06.
  • C1087 - Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems has been revised to C1087-16 developed by Committee C24.20, ASTM BOS Volume 04.07.
  • C1208/C1208M - Standard Specification for Vitrified Clay Pipe and Joints for Use in Microtunneling, Sliplining, Pipe Bursting, and Tunnels has been revised to C1208/C1208M-16 developed by Committee C04.20, ASTM BOS Volume 04.05.
  • C1234 - Standard Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature Digestion for Trace Element Determinations has been reapproved, available as C1234-11(2016) developed by Committee D02.03, ASTM BOS Volume 05.01.
  • C1281 - Standard Specification for Preformed Tape Sealants for Glazing Applications has been revised to C1281-16 developed by Committee C24.10, ASTM BOS Volume 04.07.
  • C1357 - Standard Test Methods for Evaluating Masonry Bond Strength (Withdrawn 2016) has been withdrawn and replaced by C1072 developed by Committee C15.04, ASTM BOS Volume 04.05.
  • C1382 - Standard Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints has been revised to C1382-16 developed by Committee C24.30, ASTM BOS Volume 04.07.
  • C1407 - Standard Practice for Calculating Areas, Volume, and Linear Change of Refractory Shapes has been reapproved, available as C1407-98(2016) developed by Committee C08.03, ASTM BOS Volume 15.01.
  • C1464 - Standard Specification for Bent Glass has been revised to C1464-16 developed by Committee C14.08, ASTM BOS Volume 15.02.
  • C1517 - Standard Test Method for Determination of Metallic Impurities in Uranium Metal or Compounds by DC-Arc Emission Spectroscopy has been revised to C1517-16 developed by Committee C26.05, ASTM BOS Volume 12.01.
  • C1542/C1542M - Standard Test Method for Measuring Length of Concrete Cores has been revised to C1542/C1542M-16a developed by Committee C09.61, ASTM BOS Volume 04.02.
  • C1556 - Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion has been reapproved, available as C1556-11a(2016) developed by Committee C09.66, ASTM BOS Volume 04.02.
  • C1560 - Standard Test Method for Hot Water Accelerated Aging of Glass-Fiber Reinforced Cement-Based Composites has been reapproved, available as C1560-03(2016) developed by Committee C27.40, ASTM BOS Volume 04.05.
  • C1561 - Standard Guide for Determination of Plutonium and Neptunium in Uranium Hexafluoride and U-Rich Matrix by Alpha Spectrometry has been reapproved, available as C1561-10(2016) developed by Committee C26.05, ASTM BOS Volume 12.01.
  • C1589/C1589M - Standard Practice for Outdoor Weathering of Construction Seals and Sealants has been revised to C1589/C1589M-16 developed by Committee C24.40, ASTM BOS Volume 04.07.
  • C1635 - Standard Test Method to Evaluate Adhesion/Cohesion Properties of a Sealant at Fixed Extension has been revised to C1635-16 developed by Committee C24.30, ASTM BOS Volume 04.07.
  • C1646/C1646M - Standard Practice for Making and Curing Test Specimens for Evaluating Resistance of Coarse Aggregate to Freezing and Thawing in Air-Entrained Concrete has been revised to C1646/C1646M-16 developed by Committee C09.67, ASTM BOS Volume 04.02.
  • C1655 - Standard Classification of Fireclay and High-Alumina Mortars has been reapproved, available as C1655-06(2016) developed by Committee C08.92, ASTM BOS Volume 15.01.
  • C1704/C1704M - Standard Test Method for Sampling and Testing Structural Cementitious Panels has been reapproved, available as C1704/C1704M-09a(2016) developed by Committee C27.40, ASTM BOS Volume 04.05.
  • C1705/C1705M - Standard Specification for Structural Cementitious Panels has been reapproved, available as C1705/C1705M-09(2016) developed by Committee C27.40, ASTM BOS Volume 04.05.
  • C1753/C1753M - Standard Practice for Evaluating Early Hydration of Hydraulic Cementitious Mixtures Using Thermal Measurements has been editorially changed, available as C1753/C1753M-15e1 developed by Committee C09.48, ASTM BOS Volume 04.02.
  • C1812/C1812M - Standard Practice for Design of Journal Bearing Supports to be Used in Fiber Reinforced Concrete Beam Tests has been editorially changed, available as C1812/C1812M-15e1 developed by Committee C09.42, ASTM BOS Volume 04.02.
  • C1838 - Standard Practice for Cleaning for 1S and 2S Bottles is a new standard, now available. C1838-16 developed by Committee C26.02, ASTM BOS Volume 12.01.
  • C1845 - Standard Practice for The Separation of Lanthanide Elements from Uranium Matrices Using High Pressure Ion Chromatography (HPIC) for Isotopic Analyses by Inductively Coupled Plasma Mass Spectrometry (ICP-MS) is a new standard, now available. C1845-16 developed by Committee C26.05, ASTM BOS Volume 12.01.
  • D56 - Standard Test Method for Flash Point by Tag Closed Cup Tester has been revised to D56-16 developed by Committee D02.08, ASTM BOS Volume 05.01.
  • D92 - Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester has been revised to D92-16 developed by Committee D02.08, ASTM BOS Volume 05.01.
  • D93 - Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester has been revised to D93-16 developed by Committee D02.08, ASTM BOS Volume 05.01.
  • D116 - Standard Test Methods for Vitrified Ceramic Materials for Electrical Applications has been reapproved, available as D116-86(2016) developed by Committee C21.03, ASTM BOS Volume 15.02.
  • D140/D140M - Standard Practice for Sampling Asphalt Materials has been revised (with title change) to D140/D140M-16 developed by Committee D04.30, ASTM BOS Volume 04.03.
  • D312/D312M - Standard Specification for Asphalt Used in Roofing has been revised to D312/D312M-16 developed by Committee D08.03, ASTM BOS Volume 04.04.
  • D352 - Standard Test Methods for Pasted Mica Used in Electrical Insulation has been reapproved, available as D352-97(2016) developed by Committee D09.19, ASTM BOS Volume 10.01.
  • D395 - Standard Test Methods for Rubber Property—Compression Set has been revised to D395-16 developed by Committee D11.10, ASTM BOS Volume 09.01.
  • D409/D409M - Standard Test Method for Grindability of Coal by the Hardgrove-Machine Method has been editorially changed, available as D409/D409M-12e1 developed by Committee D05.07, ASTM BOS Volume 05.06.
  • D513 - Standard Test Methods for Total and Dissolved Carbon Dioxide in Water has been revised to D513-16 developed by Committee D19.05, ASTM BOS Volume 11.01.
  • D516 - Standard Test Method for Sulfate Ion in Water has been revised to D516-16 developed by Committee D19.05, ASTM BOS Volume 11.01.
  • D566 - Standard Test Method for Dropping Point of Lubricating Grease has been revised to D566-16 developed by Committee D02.G0.03, ASTM BOS Volume 05.01.
  • D613 - Standard Test Method for Cetane Number of Diesel Fuel Oil has been revised to D613-16 developed by Committee D02.01, ASTM BOS Volume 05.05.
  • D709 - Standard Specification for Laminated Thermosetting Materials has been revised to D709-16 developed by Committee D09.07, ASTM BOS Volume 10.01.
  • D808 - Standard Test Method for Chlorine in New and Used Petroleum Products (High Pressure Decomposition Device Method) has been revised to D808-16 developed by Committee D02.03, ASTM BOS Volume 05.01.
  • D843 - Standard Specification for Nitration Grade Xylene has been revised to D843-16 developed by Committee D16.01, ASTM BOS Volume 06.04.
  • D859 - Standard Test Method for Silica in Water has been revised to D859-16 developed by Committee D19.05, ASTM BOS Volume 11.01.
  • D892 - Standard Test Method for Foaming Characteristics of Lubricating Oils has been editorially changed, available as D892-13e1 developed by Committee D02.06, ASTM BOS Volume 05.01.
  • D897 - Standard Test Method for Tensile Properties of Adhesive Bonds has been reapproved, available as D897-08(2016) developed by Committee D14.80, ASTM BOS Volume 15.06.
  • D972 - Standard Test Method for Evaporation Loss of Lubricating Greases and Oils has been revised to D972-16 developed by Committee D02.G0.03, ASTM BOS Volume 05.01.
  • D976 - Standard Test Method for Calculated Cetane Index of Distillate Fuels has been reapproved, available as D976-06(2016) developed by Committee D02.E0, ASTM BOS Volume 05.01.
  • D1018 - Standard Test Method for Hydrogen In Petroleum Fractions has been reapproved, available as D1018-11(2016) developed by Committee D02.03, ASTM BOS Volume 05.01.
  • D1067 - Standard Test Methods for Acidity or Alkalinity of Water has been revised to D1067-16 developed by Committee D19.05, ASTM BOS Volume 11.01.
  • D1084 - Standard Test Methods for Viscosity of Adhesives has been revised to D1084-16 developed by Committee D14.10, ASTM BOS Volume 15.06.
  • D1091 - Standard Test Methods for Phosphorus in Lubricating Oils and Additives has been reapproved, available as D1091-11(2016) developed by Committee D02.03, ASTM BOS Volume 05.01.
  • D1144 - Standard Practice for Determining Strength Development of Adhesive Bonds has been reapproved, available as D1144-99(2016) developed by Committee D14.10, ASTM BOS Volume 15.06.
  • D1179 - Standard Test Methods for Fluoride Ion in Water has been revised to D1179-16 developed by Committee D19.05, ASTM BOS Volume 11.01.
  • D1246 - Standard Test Method for Bromide Ion in Water has been revised to D1246-16 developed by Committee D19.05, ASTM BOS Volume 11.01.
  • D1337 - Standard Practice for Storage Life of Adhesives by Viscosity and Bond Strength has been reapproved, available as D1337-10(2016) developed by Committee D14.10, ASTM BOS Volume 15.06.
  • D1338 - Standard Practice for Working Life of Liquid or Paste Adhesives by Consistency and Bond Strength has been reapproved, available as D1338-99(2016) developed by Committee D14.10, ASTM BOS Volume 15.06.
  • D1417 - Standard Test Methods for Rubber Latices—Synthetic has been revised to D1417-16 developed by Committee D11.23, ASTM BOS Volume 09.01.
  • D1418 - Standard Practice for Rubber and Rubber Latices—Nomenclature has been reapproved, available as D1418-10a(2016) developed by Committee D11.08, ASTM BOS Volume 09.01.
  • D1489 - Standard Test Method for Nonvolatile Content of Aqueous Adhesives has been reapproved, available as D1489-09(2016) developed by Committee D14.10, ASTM BOS Volume 15.06.
  • D1621 - Standard Test Method for Compressive Properties of Rigid Cellular Plastics has been revised to D1621-16 developed by Committee D20.22, ASTM BOS Volume 08.01.
  • D1630 - Standard Test Method for Rubber Property—Abrasion Resistance (Footwear Abrader) has been revised to D1630-16 developed by Committee D11.15, ASTM BOS Volume 09.01.
  • D1632 - Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory (Withdrawn 2016) has been withdrawn, with no replacement. D1632- developed by Committee D18.15, ASTM BOS Volume 04.08.
  • D1633 - Standard Test Methods for Compressive Strength of Molded Soil-Cement Cylinders (Withdrawn 2016) has been withdrawn, with no replacement. D1633- developed by Committee D18.15, ASTM BOS Volume 04.08.
  • D1709 - Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method has been revised to D1709-16a developed by Committee D20.19, ASTM BOS Volume 08.01.
  • D1766 - Standard Test Method for Rubber Chemicals—Solubility has been reapproved, available as D1766-05(2016) developed by Committee D11.11, ASTM BOS Volume 09.01.
  • D1796 - Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure) has been reapproved, available as D1796-11(2016) developed by Committee D02.02, ASTM BOS Volume 05.01.
  • D1817 - Standard Test Method for Rubber Chemicals—Density has been reapproved, available as D1817-05(2016) developed by Committee D11.11, ASTM BOS Volume 09.01.
  • D1823 - Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer has been revised to D1823-16 developed by Committee D20.15, ASTM BOS Volume 08.01.
  • D1838 - Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases has been revised to D1838-16 developed by Committee D02.H0, ASTM BOS Volume 05.01.
  • D1857/D1857M - Standard Test Method for Fusibility of Coal and Coke Ash has been revised to D1857/D1857M-16 developed by Committee D05.21, ASTM BOS Volume 05.06.
  • D1874 - Standard Specification for Water- or Solvent-Soluble Liquid Adhesives for Automatic Machine Sealing of Top Flaps of Fiberboard Shipping Cases has been revised to D1874-16 developed by Committee D10.14, ASTM BOS Volume 15.10.
  • D1975 - Standard Test Method for Environmental Stress Crack Resistance of Plastic Injection Molded Open Head Pails has been revised to D1975-16 developed by Committee D10.21, ASTM BOS Volume 15.10.
  • D1987 - Standard Test Method for Biological Clogging of Geotextile or Soil/Geotextile Filters has been reapproved, available as D1987-07(2016) developed by Committee D35.02, ASTM BOS Volume 04.13.
  • D1990 - Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens has been revised to D1990-16 developed by Committee D07.02, ASTM BOS Volume 04.10.
  • D2131 - Standard Classification for Natural Muscovite Mica Splittings has been reapproved, available as D2131-97(2016) developed by Committee D09.19, ASTM BOS Volume 10.01.
  • D2166/D2166M - Standard Test Method for Unconfined Compressive Strength of Cohesive Soil has been revised to D2166/D2166M-16 developed by Committee D18.05, ASTM BOS Volume 04.08.
  • D2293 - Standard Test Method for Creep Properties of Adhesives in Shear by Compression Loading (Metal-to-Metal) has been reapproved, available as D2293-96(2016) developed by Committee D14.80, ASTM BOS Volume 15.06.
  • D2294 - Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal) has been reapproved, available as D2294-96(2016) developed by Committee D14.80, ASTM BOS Volume 15.06.
  • D2295 - Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal) has been reapproved, available as D2295-96(2016) developed by Committee D14.80, ASTM BOS Volume 15.06.
  • D2359 - Standard Specification for Refined Benzene-535 has been revised to D2359-16 developed by Committee D16.01, ASTM BOS Volume 06.04.
  • D2439 - Standard Specification for Refined Phenol has been revised to D2439-16 developed by Committee D16.02, ASTM BOS Volume 06.04.
  • D2500 - Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels has been revised (with title change) to D2500-16a developed by Committee D02.07, ASTM BOS Volume 05.01.
  • D2570 - Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants has been revised to D2570-16 developed by Committee D15.09, ASTM BOS Volume 15.05.
  • D2651 - Standard Guide for Preparation of Metal Surfaces for Adhesive Bonding has been reapproved, available as D2651-01(2016) developed by Committee D14.80, ASTM BOS Volume 15.06.
  • D2659 - Standard Test Method for Column Crush Properties of Blown Thermoplastic Containers has been revised to D2659-16 developed by Committee D20.19, ASTM BOS Volume 08.01.
  • D2669 - Standard Test Method for Apparent Viscosity of Petroleum Waxes Compounded with Additives (Hot Melts) has been revised to D2669-16 developed by Committee D02.10.0A, ASTM BOS Volume 05.01.
  • D2687 - Standard Practices for Sampling Particulate Ion-Exchange Materials has been reapproved, available as D2687-95(2016) developed by Committee D19.08, ASTM BOS Volume 11.02.
  • D2688 - Standard Test Method for Corrosivity of Water in the Absence of Heat Transfer (Weight Loss Method) has been editorially changed, available as D2688-15e1 developed by Committee D19.03, ASTM BOS Volume 11.01.
  • D2702 - Standard Practice for Rubber Chemicals—Determination of Infrared Absorption Characteristics has been reapproved, available as D2702-05(2016) developed by Committee D11.11, ASTM BOS Volume 09.01.
  • D2712 - Standard Test Method for Hydrocarbon Traces in Propylene Concentrates by Gas Chromatography has been reapproved, available as D2712-91(2016) developed by Committee D02.D0.03, ASTM BOS Volume 05.01.
  • D2784 - Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp) (Withdrawn 2016) has been withdrawn, with no replacement. D2784-11 developed by Committee D02.03, ASTM BOS Volume 05.01.
  • D2843 - Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics has been revised to D2843-16 developed by Committee D20.30, ASTM BOS Volume 08.01.
  • D3044 - Standard Test Method for Shear Modulus of Wood-Based Structural Panels has been revised to D3044-16 developed by Committee D07.03, ASTM BOS Volume 04.10.
  • D3156 - Standard Practice for Rubber—Chromatographic Analysis of Antidegradants (Antioxidants, Antiozonants and Stabilizers) has been reapproved, available as D3156-96(2016) developed by Committee D11.11, ASTM BOS Volume 09.01.
  • D3160 - Standard Test Method for Phenol Content of Cumene (Isopropylbenzene) or AMS (α–Methylstyrene) has been revised to D3160-16 developed by Committee D16.07, ASTM BOS Volume 06.04.
  • D3244 - Standard Practice for Utilization of Test Data to Determine Conformance with Specifications has been revised to D3244-16 developed by Committee D02.94, ASTM BOS Volume 05.01.
  • D3462/D3462M - Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules has been revised to D3462/D3462M-16 developed by Committee D08.02, ASTM BOS Volume 04.04.
  • D3525 - Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Gas Chromatography has been reapproved, available as D3525-04(2016) developed by Committee D02.B0, ASTM BOS Volume 05.01.
  • D3528 - Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading has been reapproved, available as D3528-96(2016) developed by Committee D14.80, ASTM BOS Volume 15.06.
  • D3561 - Standard Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry has been revised to D3561-16 developed by Committee D19.05, ASTM BOS Volume 11.02.
  • D3651 - Standard Test Method for Barium in Brackish Water, Seawater, and Brines has been revised to D3651-16 developed by Committee D19.05, ASTM BOS Volume 11.02.
  • D3658 - Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints has been reapproved, available as D3658-01(2016) developed by Committee D14.80, ASTM BOS Volume 15.06.
  • D3667 - Standard Specification for Rubber Seals Used in Flat-Plate Solar Collectors has been revised to D3667-16 developed by Committee D11.37, ASTM BOS Volume 09.02.
  • D3675 - Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source has been revised to D3675-16 developed by Committee D20.30, ASTM BOS Volume 08.02.
  • D3707 - Standard Test Method for Storage Stability of Water-in-Oil Emulsions by the Oven Test Method (Withdrawn 2016) has been withdrawn, with no replacement. D3707-89(2010) developed by Committee D02.N0.02, ASTM BOS Volume 05.01.
  • D3709 - Standard Test Method for Stability of Water-in-Oil Emulsions Under Low to Ambient Temperature Cycling Conditions (Withdrawn 2016) has been withdrawn, with no replacement. D3709- developed by Committee D02.N0.02, ASTM BOS Volume 05.01.
  • D3711 - Standard Test Method for Deposition Tendencies of Liquids in Thin Films and Vapors (Withdrawn 2016) has been withdrawn, with no replacement. D3711-95(2009) developed by Committee D02.L0.07, ASTM BOS Volume 05.02.
  • D3745/D3745M - Standard Practice for Installation of Prefabricated Asphalt Reservoir, Pond, Canal, and Ditch Liner (Exposed Type) (Withdrawn 2016) has been withdrawn, with no replacement. D3745/D3745M-95R2015E01 developed by Committee D35.10, ASTM BOS Volume 04.13.
  • D3792 - Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph has been revised to D3792-16 developed by Committee D01.21, ASTM BOS Volume 06.01.
  • D3805/D3805M - Standard Guide for Application of Aluminum-Pigmented Asphalt Roof Coatings has been revised to D3805/D3805M-16 developed by Committee D08.05, ASTM BOS Volume 04.04.
  • D3825 - Standard Test Method for Dynamic Surface Tension by the Fast-Bubble Technique (Withdrawn 2016) has been withdrawn, with no replacement. D3825-09 developed by Committee D02.L0.07, ASTM BOS Volume 05.02.
  • D3828 - Standard Test Methods for Flash Point by Small Scale Closed Cup Tester has been revised to D3828-16 developed by Committee D02.08, ASTM BOS Volume 05.02.
  • D3835 - Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer has been revised to D3835-16 developed by Committee D20.30, ASTM BOS Volume 08.02.
  • D3841 - Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels has been revised to D3841-16 developed by Committee D20.24, ASTM BOS Volume 08.03.
  • D3852 - Standard Practice for Sampling and Handling Phenol, Cresols, and Cresylic Acid has been revised to D3852-16 developed by Committee D16.08, ASTM BOS Volume 06.04.
  • D3867 - Standard Test Methods for Nitrite-Nitrate in Water has been revised to D3867-16 developed by Committee D19.05, ASTM BOS Volume 11.01.
  • D3924 - Standard Specification for Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials has been revised to D3924-16 developed by Committee D01.20, ASTM BOS Volume 06.01.
  • D3981 - Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications has been reapproved, available as D3981-09a(2016) developed by Committee D20.19, ASTM BOS Volume 08.02.
  • D4006 - Standard Test Method for Water in Crude Oil by Distillation has been revised to D4006-16 developed by Committee D02.02, ASTM BOS Volume 05.02.
  • D4007 - Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) has been reapproved, available as D4007-11(2016) developed by Committee D02.02, ASTM BOS Volume 05.02.
  • D4063 - Standard Specification for Pressboard for Electrical Insulating Purposes has been reapproved, available as D4063-99(2016) developed by Committee D09.19, ASTM BOS Volume 10.02.
  • D4077 - Standard Specification for Cumene (Isopropylbenzene) has been revised to D4077-16 developed by Committee D16.07, ASTM BOS Volume 06.04.
  • D4081 - Standard Specification for Drycleaning-Grade Perchloroethylene has been revised to D4081-16 developed by Committee D26.06, ASTM BOS Volume 15.05.
  • D4083 - Standard Practice for Description of Frozen Soils (Visual-Manual Procedure) has been reapproved, available as D4083-89(2016) developed by Committee D18.19, ASTM BOS Volume 04.08.
  • D4169 - Standard Practice for Performance Testing of Shipping Containers and Systems has been revised to D4169-16 developed by Committee D10.21, ASTM BOS Volume 15.10.
  • D4171 - Standard Specification for Fuel System Icing Inhibitors has been revised to D4171-16 developed by Committee D02.J0.04, ASTM BOS Volume 05.02.
  • D4226 - Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products has been revised to D4226-16 developed by Committee D20.24, ASTM BOS Volume 08.03.
  • D4303 - Standard Test Methods for Lightfastness of Colorants Used in Artists' Materials has been reapproved, available as D4303-10(2016) developed by Committee D01.57, ASTM BOS Volume 06.02.
  • D4317 - Standard Specification for Polyvinyl Acetate-Based Emulsion Adhesives has been revised to D4317-16 developed by Committee D14.30, ASTM BOS Volume 15.06.
  • D4338 - Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend has been reapproved, available as D4338-97(2016) developed by Committee D14.10, ASTM BOS Volume 15.06.
  • D4397 - Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications has been revised to D4397-16 developed by Committee D20.19, ASTM BOS Volume 08.02.
  • D4418 - Standard Practice for Receipt, Storage, and Handling of Fuels for Gas Turbines has been reapproved, available as D4418-00(2016) developed by Committee D02.E0, ASTM BOS Volume 05.02.
  • D4477 - Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit has been revised to D4477-16 developed by Committee D20.24, ASTM BOS Volume 08.03.
  • D4493 - Standard Test Method for Solidification Point of Bisphenol A(4,4′-Isopropylidenediphenol) has been revised to D4493-16 developed by Committee D16.02, ASTM BOS Volume 06.04.
  • D4495 - Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight has been revised to D4495-16 developed by Committee D20.24, ASTM BOS Volume 08.03.
  • D4508 - Standard Test Method for Chip Impact Strength of Plastics (Withdrawn 2016) has been withdrawn, with no replacement. D4508-16 developed by Committee D20.10, ASTM BOS Volume 08.02.
  • D4576 - Standard Test Method for Mold Growth Resistance of Wet Blue and Wet White has been revised (with title change) to D4576-16 developed by Committee D31.02, ASTM BOS Volume 15.04.
  • D4600 - Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres has been reapproved, available as D4600-95(2016) developed by Committee D22.04, ASTM BOS Volume 11.07.
  • D4611 - Standard Test Method for Specific Heat of Rock and Soil has been revised to D4611-16 developed by Committee D18.12, ASTM BOS Volume 04.08.
  • D4612 - Standard Test Method for Calculating Thermal Diffusivity of Rock and Soil has been revised (with title change) to D4612-16 developed by Committee D18.12, ASTM BOS Volume 04.08.
  • D4638 - Standard Guide for Preparation of Biological Samples for Inorganic Chemical Analysis has been revised to D4638-16 developed by Committee D19.05, ASTM BOS Volume 11.01.
  • D4734 - Standard Specification for Refined Benzene-545 has been revised to D4734-16 developed by Committee D16.01, ASTM BOS Volume 06.04.
  • D4742 - Standard Test Method for Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT) has been revised to D4742-16 developed by Committee D02.09.0G, ASTM BOS Volume 05.02.
  • D4802 - Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet has been revised to D4802-16 developed by Committee D20.15, ASTM BOS Volume 08.02.
  • D4838 - Standard Test Method for Determining the Relative Tinting Strength of Chromatic Paints has been reapproved, available as D4838-88(2016) developed by Committee D01.57, ASTM BOS Volume 06.02.
  • D4886 - Standard Test Method for Abrasion Resistance of Geotextiles (Sand Paper/Sliding Block Method) has been reapproved, available as D4886-10(2016) developed by Committee D35.02, ASTM BOS Volume 04.13.
  • D4895 - Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion has been revised to D4895-16 developed by Committee D20.15, ASTM BOS Volume 08.02.
  • D4896 - Standard Guide for Use of Adhesive-Bonded Single Lap-Joint Specimen Test Results has been reapproved, available as D4896-01(2016) developed by Committee D14.80, ASTM BOS Volume 15.06.
  • D4897/D4897M - Standard Specification for Asphalt-Coated Glass-Fiber Venting Base Sheet Used in Roofing has been revised to D4897/D4897M-16 developed by Committee D08.04, ASTM BOS Volume 04.04.
  • D4941 - Standard Practice for Preparing Drawdowns of Artists’ Paste Paints has been reapproved, available as D4941-06(2016) developed by Committee D01.57, ASTM BOS Volume 06.02.
  • D5006 - Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels has been reapproved, available as D5006-11(2016) developed by Committee D02.J0.04, ASTM BOS Volume 05.02.
  • D5040 - Standard Test Methods for Ash Content of Adhesives has been reapproved, available as D5040-90(2016) developed by Committee D14.10, ASTM BOS Volume 15.06.
  • D5055 - Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists has been revised to D5055-16 developed by Committee D07.02, ASTM BOS Volume 04.10.
  • D5090 - Standard Practice for Standardizing Ultrafiltration Permeate Flow Performance Data (Withdrawn 2016) has been withdrawn, with no replacement. D5090-07 developed by Committee D19.08, ASTM BOS Volume 11.02.
  • D5113 - Standard Test Method for Determining Adhesive Attack on Rigid Cellular Foam has been reapproved, available as D5113-97(2016) developed by Committee D14.10, ASTM BOS Volume 15.06.
  • D5179 - Standard Test Method for Measuring Adhesion of Organic Coatings in the Laboratory by Direct Tensile Method has been revised (with title change) to D5179-16 developed by Committee D01.23, ASTM BOS Volume 06.01.
  • D5211 - Standard Specification for Xylenes for p-Xylene Feedstock has been revised to D5211-16 developed by Committee D16.01, ASTM BOS Volume 06.04.
  • D5260 - Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds has been revised to D5260-16 developed by Committee D20.15, ASTM BOS Volume 08.03.
  • D5262 - Standard Test Method for Evaluating the Unconfined Tension Creep and Creep Rupture Behavior of Geosynthetics has been reapproved, available as D5262-07(2016) developed by Committee D35.02, ASTM BOS Volume 04.13.
  • D5265 - Standard Test Method for Bridge Impact Testing has been reapproved, available as D5265-09(2016) developed by Committee D10.21, ASTM BOS Volume 15.10.
  • D5275 - Standard Test Method for Fuel Injector Shear Stability Test (FISST) for Polymer Containing Fluids has been revised to D5275-16 developed by Committee D02.07, ASTM BOS Volume 05.02.
  • D5309 - Standard Specification for Cyclohexane 999 has been revised to D5309-16 developed by Committee D16.01, ASTM BOS Volume 06.04.
  • D5361/D5361M - Standard Practice for Sampling Compacted Asphalt Mixtures for Laboratory Testing has been revised (with title change) to D5361/D5361M-16 developed by Committee D04.30, ASTM BOS Volume 04.03.
  • D5420 - Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact) has been revised to D5420-16 developed by Committee D20.10, ASTM BOS Volume 08.03.
  • D5453 - Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence has been editorially changed, available as D5453-16e1 developed by Committee D02.03, ASTM BOS Volume 05.02.
  • D5464 - Standard Test Method for pH Measurement of Water of Low Conductivity has been revised to D5464-16 developed by Committee D19.03, ASTM BOS Volume 11.01.
  • D5465 - Standard Practices for Determining Microbial Colony Counts from Waters Analyzed by Plating Methods has been revised to D5465-16 developed by Committee D19.24, ASTM BOS Volume 11.02.
  • D5466 - Standard Test Method for Determination of Volatile Organic Compounds in Atmospheres (Canister Sampling Methodology) has been revised (with title change) to D5466-15 developed by Committee D22.05, ASTM BOS Volume 11.07.
  • D5471 - Standard Specification for O-Xylene 980 has been revised to D5471-16 developed by Committee D16.01, ASTM BOS Volume 06.04.
  • D5493 - Standard Test Method for Permittivity of Geotextiles Under Load has been reapproved, available as D5493-06(2016) developed by Committee D35.03, ASTM BOS Volume 04.13.
  • D5571 - Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Plastic Tighthead Drums Not Exceeding 60 Gal (227 L) in Rated Capacity has been revised to D5571-16 developed by Committee D10.21, ASTM BOS Volume 15.10.
  • D5596 - Standard Test Method For Microscopic Evaluation of the Dispersion of Carbon Black in Polyolefin Geosynthetics has been reapproved, available as D5596-03(2016) developed by Committee D35.02, ASTM BOS Volume 04.13.
  • D5606 - Standard Specification for Toluene for Toluene Diisocyanate (TDI) Feedstock has been revised to D5606-16 developed by Committee D16.01, ASTM BOS Volume 06.04.
  • D5615 - Standard Test Method for Operating Characteristics of Home Reverse Osmosis Devices (Withdrawn 2016) has been withdrawn, with no replacement. D5615-07e1 developed by Committee D19.08, ASTM BOS Volume 11.02.
  • D5622 - Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis has been revised to D5622-16 developed by Committee D02.03, ASTM BOS Volume 05.02.
  • D5673 - Standard Test Method for Elements in Water by Inductively Coupled Plasma—Mass Spectrometry has been revised to D5673-16 developed by Committee D19.05, ASTM BOS Volume 11.02.
  • D5819 - Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability has been reapproved, available as D5819-05(2016) developed by Committee D35.02, ASTM BOS Volume 04.13.
  • D5863 - Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry has been reapproved, available as D5863-00a(2016) developed by Committee D02.03, ASTM BOS Volume 05.02.
  • D5871 - Standard Specification for Benzene for Cyclohexane Feedstock has been revised to D5871-16 developed by Committee D16.01, ASTM BOS Volume 06.04.
  • D5888 - Standard Guide for Storage and Handling of Geosynthetic Clay Liners has been reapproved, available as D5888-06(2016) developed by Committee D35.04, ASTM BOS Volume 04.13.
  • D5894 - Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet) has been revised to D5894-16 developed by Committee D01.27, ASTM BOS Volume 06.01.
  • D5972 - Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method) has been revised to D5972-16 developed by Committee D02.07, ASTM BOS Volume 05.02.
  • D5996 - Standard Test Method for Measuring Anionic Contaminants in High-Purity Water by On-Line Ion Chromatography has been revised to D5996-16 developed by Committee D19.03, ASTM BOS Volume 11.01.
  • D6078 - Standard Test Method for Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder Lubricity Evaluator (SLBOCLE) has been reapproved, available as D6078-04(2016) developed by Committee D02.E0, ASTM BOS Volume 05.02.
  • D6079 - Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR) has been reapproved, available as D6079-11(2016) developed by Committee D02.E0, ASTM BOS Volume 05.02.
  • D6088 - Standard Practice for Installation of Geocomposite Pavement Drains has been reapproved, available as D6088-06(2016) developed by Committee D35.03, ASTM BOS Volume 04.13.
  • D6117 - Standard Test Methods for Mechanical Fasteners in Plastic Lumber and Shapes has been revised to D6117-16 developed by Committee D20.20, ASTM BOS Volume 08.03.
  • D6142 - Standard Test Method for Analysis of Phenol by Capillary Gas Chromatography has been revised to D6142-16 developed by Committee D16.02, ASTM BOS Volume 06.04.
  • D6150 - Standard Test Method for Estimating Processing Losses of Plastisols and Organosols Due to Volatility has been revised to D6150-16 developed by Committee D20.15, ASTM BOS Volume 08.03.
  • D6165 - Standard Guide for the Comparison, Detection, and Identification of the Odors of Paints, Inks, and Related Materials (Withdrawn 2016) has been withdrawn, with no replacement. D6165- developed by Committee D01.24, ASTM BOS Volume 06.01.
  • D6253 - Standard Practice for Treatment and/or Marking of Wood Packaging Materials has been revised to D6253-16 developed by Committee D10.12, ASTM BOS Volume 15.10.
  • D6304 - Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration has been reinstated as D6304-16 developed by Committee D02.06, ASTM BOS Volume 05.03.
  • D6351 - Standard Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids has been reapproved, available as D6351-10(2016) developed by Committee D02.N0, ASTM BOS Volume 05.03.
  • D6386 - Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting has been revised to D6386-16 developed by Committee D01.46, ASTM BOS Volume 06.02.
  • D6386 - Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting has been revised to D6386-16a developed by Committee D01.46, ASTM BOS Volume 06.02.
  • D6389 - Standard Practice for Tests to Evaluate the Chemical Resistance of Geotextiles to Liquids has been reapproved, available as D6389-99(2016) developed by Committee D35.02, ASTM BOS Volume 04.13.
  • D6450 - Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester has been revised to D6450-16 developed by Committee D02.08, ASTM BOS Volume 05.03.
  • D6559 - Standard Test Method for Determination of Thermogravimetric (TGA) Air Reactivity of Baked Carbon Anodes and Cathode Blocks has been reapproved (with editorial change), available as D6559-00A(2016)e1 developed by Committee D02.05, ASTM BOS Volume 05.03.
  • D6643 - Standard Test Method for Testing Wood-Base Panel Corner Impact Resistance has been reapproved, available as D6643-01(2016) developed by Committee D07.03, ASTM BOS Volume 04.10.
  • D6657 - Standard Test Method for pH of Wet Blue and Wet White has been revised (with title change) to D6657-16 developed by Committee D31.02, ASTM BOS Volume 15.04.
  • D6659 - Standard Practice for Sampling and Preparation of Wet Blue and Wet White for Physical and Chemical Tests has been revised (with title change) to D6659-16 developed by Committee D31.02, ASTM BOS Volume 15.04.
  • D6695 - Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings has been revised to D6695-16 developed by Committee D01.27, ASTM BOS Volume 06.01.
  • D6707/D6707M - Standard Specification for Circular-Knit Geotextile for Use in Subsurface Drainage Applications has been editorially changed, available as D6707/D6707M-06(2016)e1 developed by Committee D35.03, ASTM BOS Volume 04.13.
  • D6728 - Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry has been revised to D6728-16 developed by Committee D02.03, ASTM BOS Volume 05.03.
  • D6730 - Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100–Metre Capillary (with Precolumn) High-Resolution Gas Chromatography has been reapproved, available as D6730-01(2016) developed by Committee D02.04.0L, ASTM BOS Volume 05.03.
  • D6733 - Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50-Metre Capillary High Resolution Gas Chromatography has been reapproved, available as D6733-01(2016) developed by Committee D02.04.0L, ASTM BOS Volume 05.03.
  • D6753/D6753M - Standard Specification for Coal Tar Adhesive has been reapproved, available as D6753/D6753M-02(2016) developed by Committee D08.05, ASTM BOS Volume 04.04.
  • D6777 - Standard Test Method for Relative Rigidity of Poly(Vinyl Chloride)(PVC) Siding has been revised to D6777-16 developed by Committee D20.24, ASTM BOS Volume 08.03.
  • D6779 - Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA) has been revised to D6779-16 developed by Committee D20.15, ASTM BOS Volume 08.03.
  • D6784 - Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) has been revised to D6784-16 developed by Committee D22.03, ASTM BOS Volume 11.07.
  • D6805 - Standard Practice for Infrared (IR) Procedure for Determination of Aromatic/ Aliphatic Ratio of Bituminous Emulsions has been reapproved, available as D6805-02(2016) developed by Committee D08.09, ASTM BOS Volume 04.04.
  • D6862 - Standard Test Method for 90 Degree Peel Resistance of Adhesives has been reapproved, available as D6862-11(2016) developed by Committee D14.10, ASTM BOS Volume 15.06.
  • D6866 - Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis has been revised to D6866-16 developed by Committee D20.96, ASTM BOS Volume 08.03.
  • D6888 - Standard Test Method for Available Cyanides with Ligand Displacement and Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection has been revised to D6888-16 developed by Committee D19.06, ASTM BOS Volume 11.02.
  • D6969 - Standard Practice for Preparation of Calcined Petroleum Coke Samples for Analysis has been revised to D6969-16 developed by Committee D02.05, ASTM BOS Volume 05.03.
  • D7036 - Standard Practice for Competence of Air Emission Testing Bodies has been revised to D7036-16 developed by Committee D22.03, ASTM BOS Volume 11.07.
  • D7042 - Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity) has been revised to D7042-16 developed by Committee D02.07, ASTM BOS Volume 05.04.
  • D7083 - Standard Practice for Determination of Monomeric Plasticizers in Poly (Vinyl Chloride) (PVC) by Gas Chromatography has been revised to D7083-16 developed by Committee D20.70, ASTM BOS Volume 08.03.
  • D7094 - Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester has been revised to D7094-16 developed by Committee D02.08, ASTM BOS Volume 05.04.
  • D7124 - Standard Specification for Benzene for Use with Zeolite Based Catalysts has been revised to D7124-16 developed by Committee D16.01, ASTM BOS Volume 06.04.
  • D7149 - Standard Practice for Determining the Freeze Thaw Stability of Adhesives has been reapproved, available as D7149-05(2016) developed by Committee D14.10, ASTM BOS Volume 15.06.
  • D7158/D7158M - Standard Test Method for Wind Resistance of Asphalt Shingles (Uplift Force/Uplift Resistance Method) has been revised to D7158/D7158M-16 developed by Committee D08.02, ASTM BOS Volume 04.04.
  • D7161 - Standard Practice for Determination of Real Time Expiration Dating of Mature Medical Gloves Stored Under Typical Warehouse Conditions has been revised to D7161-16 developed by Committee D11.40, ASTM BOS Volume 09.02.
  • D7171 - Standard Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy has been reapproved, available as D7171-05(2016) developed by Committee D02.03, ASTM BOS Volume 05.04.
  • D7178 - Standard Practice for Determining the Number of Constrictions “m” of Non-Woven Geotextiles as a Complementary Filtration Property has been revised to D7178-16 developed by Committee D35.03, ASTM BOS Volume 04.13.
  • D7185 - Standard Specification for Low Toluene Low Dioxane (LTLD) Benzene has been revised to D7185-16 developed by Committee D16.01, ASTM BOS Volume 06.04.
  • D7236 - Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method) has been revised to D7236-16 developed by Committee D02.08, ASTM BOS Volume 05.04.
  • D7304 - Standard Test Method for Determination of Denatonium Ion in Engine Coolant by HPLC has been revised to D7304-16 developed by Committee D15.04, ASTM BOS Volume 15.05.
  • D7345 - Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Micro Distillation Method) has been revised to D7345-16 developed by Committee D02.08, ASTM BOS Volume 05.04.
  • D7376 - Standard Practice for Outdoor Evaluation of Wet Stack Storage Conditions on Coil-Coated Metals has been reapproved, available as D7376-10a(2016) developed by Committee D01.53, ASTM BOS Volume 06.02.
  • D7386 - Standard Practice for Performance Testing of Packages for Single Parcel Delivery Systems has been revised to D7386-16 developed by Committee D10.21, ASTM BOS Volume 15.10.
  • D7397 - Standard Test Method for Cloud Point of Petroleum Products (Miniaturized Optical Method) has been reapproved, available as D7397-10(2016) developed by Committee D02.07, ASTM BOS Volume 05.04.
  • D7398 - Standard Test Method for Boiling Range Distribution of Fatty Acid Methyl Esters (FAME) in the Boiling Range from 100 °C to 615 °C by Gas Chromatography has been reapproved, available as D7398-11(2016) developed by Committee D02.04.0H, ASTM BOS Volume 05.04.
  • D7423 - Standard Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection has been editorially changed, available as D7423-16e1 developed by Committee D02.D0.04, ASTM BOS Volume 05.04.
  • D7430 - Standard Practice for Mechanical Sampling of Coal has been revised to D7430-16 developed by Committee D05.23, ASTM BOS Volume 05.06.
  • D7462 - Standard Test Method for Oxidation Stability of Biodiesel (B100) and Blends of Biodiesel with Middle Distillate Petroleum Fuel (Accelerated Method) (Withdrawn 2016) has been withdrawn, with no replacement. D7462-11 developed by Committee D02.14, ASTM BOS Volume 05.04.
  • D7463 - Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures, and Fuel Associated Water has been revised to D7463-16 developed by Committee D02.14, ASTM BOS Volume 05.04.
  • D7485 - Standard Test Method for Determination of Nonylphenol, p-tert-Octylphenol, Nonylphenol Monoethoxylate and Nonylphenol Diethoxylate in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry has been revised to D7485-16 developed by Committee D19.06, ASTM BOS Volume 11.02.
  • D7521 - Standard Test Method for Determination of Asbestos in Soil has been revised to D7521-16 developed by Committee D22.07, ASTM BOS Volume 11.07.
  • D7532 - Standard Practice for Determination of Re-tack Ability of Carpet Adhesives has been reapproved, available as D7532-09(2016) developed by Committee D14.10, ASTM BOS Volume 15.06.
  • D7536 - Standard Test Method for Chlorine in Aromatics by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry has been revised to D7536-16 developed by Committee D16.04, ASTM BOS Volume 06.04.
  • D7548 - Standard Test Method for Determination of Accelerated Iron Corrosion in Petroleum Products has been revised to D7548-16 developed by Committee D02.14, ASTM BOS Volume 05.04.
  • D7563 - Standard Test Method for Evaluation of the Ability of Engine Oil to Emulsify Water and Simulated Ed85 Fuel has been reapproved, available as D7563-10(2016) developed by Committee D02.B0.07, ASTM BOS Volume 05.04.
  • D7564/D7564M - Standard Practice for Construction of Asphalt-Rubber Cape Seal has been revised to D7564/D7564M-16 developed by Committee D04.24, ASTM BOS Volume 04.03.
  • D7574 - Standard Test Method for Determination of Bisphenol A in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry has been revised to D7574-16 developed by Committee D19.06, ASTM BOS Volume 11.02.
  • D7583 - Standard Test Method for John Deere Coolant Cavitation Test has been revised to D7583-16 developed by Committee D15.11, ASTM BOS Volume 15.05.
  • D7584 - Standard Test Method for Evaluating the Resistance of the Surface of Wet Blue and Wet White to the Growth of Fungi in an Environmental Chamber has been revised (with title change) to D7584-16 developed by Committee D31.02, ASTM BOS Volume 15.04.
  • D7597 - Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Hydrogen Dimethylamidophosphate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid and Pinacolyl Methylphosphonic Acid in Water by Liquid Chromatography/Tandem Mass Spectrometry has been revised to D7597-16 developed by Committee D19.06, ASTM BOS Volume 11.02.
  • D7598 - Standard Test Method for Determination of Thiodiglycol in Water by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry has been revised to D7598-16 developed by Committee D19.06, ASTM BOS Volume 11.02.
  • D7599 - Standard Test Method for Determination of Diethanolamine, Triethanolamine, N-Methyldiethanolamine and N-Ethyldiethanolamine in Water by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS) has been revised to D7599-16 developed by Committee D19.06, ASTM BOS Volume 11.02.
  • D7600 - Standard Test Method for Determination of Aldicarb, Carbofuran, Oxamyl and Methomyl by Liquid Chromatography/Tandem Mass Spectrometry has been revised to D7600-16 developed by Committee D19.06, ASTM BOS Volume 11.02.
  • D7644 - Standard Test Method for Determination of Bromadiolone, Brodifacoum, Diphacinone and Warfarin in Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS) has been revised to D7644-16 developed by Committee D19.06, ASTM BOS Volume 11.02.
  • D7645 - Standard Test Method for Determination of Aldicarb, Aldicarb Sulfone, Aldicarb Sulfoxide, Carbofuran, Methomyl, Oxamyl, and Thiofanox in Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS) has been revised to D7645-16 developed by Committee D19.06, ASTM BOS Volume 11.02.
  • D7688 - Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR) by Visual Observation has been reapproved, available as D7688-11(2016) developed by Committee D02.E0, ASTM BOS Volume 05.04.
  • D7691 - Standard Test Method for Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) has been revised to D7691-16 developed by Committee D02.03, ASTM BOS Volume 05.04.
  • D7714 - Standard Specification for Glycerin Base Engine Coolant for Automobile and Light-Duty Service has been editorially changed, available as D7714-11(2016)e1 developed by Committee D15.07, ASTM BOS Volume 15.05.
  • D7715 - Standard Specification for Fully-Formulated Glycerin Base Engine Coolant for Heavy-Duty Engines has been editorially changed, available as D7715-12(2016)e1 developed by Committee D15.93, ASTM BOS Volume 15.05.
  • D7719 - Standard Specification for High Aromatic Content Unleaded Hydrocarbon Aviation Gasoline has been revised to D7719-16 developed by Committee D02.J0.02, ASTM BOS Volume 05.04.
  • D7733 - Standard Specification for Acrylic Dispersion Ground has been reapproved, available as D7733-12(2016) developed by Committee D01.57, ASTM BOS Volume 06.02.
  • D7739 - Standard Practice for Thermal Oxidative Stability Measurement via Quartz Crystal Microbalance has been reapproved, available as D7739-11(2016) developed by Committee D02.J0.03, ASTM BOS Volume 05.04.
  • D7740 - Standard Practice for Optimization, Calibration, and Validation of Atomic Absorption Spectrometry for Metal Analysis of Petroleum Products and Lubricants has been reapproved, available as D7740-11(2016) developed by Committee D02.03, ASTM BOS Volume 05.04.
  • D7748/D7748M - Standard Test Method for Flexural Rigidity of Geogrids, Geotextiles and Related Products has been editorially changed, available as D7748/D7748M-14e1 developed by Committee D35.01, ASTM BOS Volume 04.13.
  • D7766/D7766M - Standard Practice for Damage Resistance Testing of Sandwich Constructions has been revised to D7766/D7766M-16 developed by Committee D30.09, ASTM BOS Volume 15.03.
  • D7797 - Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method has been revised to D7797-16 developed by Committee D02.J0.05, ASTM BOS Volume 05.05.
  • D7823 - Standard Test Method for Determination of Low Level, Regulated Phthalates in Poly (Vinyl Chloride) Plastics by Thermal Desorption—Gas Chromatography/Mass Spectrometry has been revised to D7823-16 developed by Committee D20.70, ASTM BOS Volume 08.03.
  • D7902 - Standard Terminology for Radiochemical Analyses has been revised to D7902-16 developed by Committee D19.04, ASTM BOS Volume 11.02.
  • D7928 - Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis is a new standard, now available. D7928-16 developed by Committee D18.03, ASTM BOS Volume 04.09.
  • D7966/D7966M - Standard Test Method for Resistance to Creep of Adhesives in Static Shear by Compression Loading (Wood-to-Wood) has been revised to D7966/D7966M-16 developed by Committee D14.30, ASTM BOS Volume 15.06.
  • D7979 - Standard Test Method for Determination of Perfluorinated Compounds in Water, Sludge, Influent, Effluent and Wastewater by Liquid Chromatography Tandem Mass Spectrometry (LC/MS/MS) has been revised to D7979-16 developed by Committee D19.06, ASTM BOS Volume 11.02.
  • D8002 - Standard Test Method for Modified Fouling Index (MFI-0.45) of Water has been editorially changed, available as D8002-15e1 developed by Committee D19.08, ASTM BOS Volume 11.02.
  • D8027 - Standard Practice for Concentration of Select Radionuclides Using MnO2 for Measurement Purposes is a new standard, now available. D8027-16 developed by Committee D19.04, ASTM BOS Volume 11.02.
  • D8031 - Standard Test Method for Acid Number of Terephthalic Acid (TA) by Automatic Potentiometric Titration is a new standard, now available. D8031-16 developed by Committee D16.02, ASTM BOS Volume 06.04.
  • D8032 - Standard Test Method for Acid Number of Terephthalic Acid by Color-Indicator Titration is a new standard, now available. D8032-16 developed by Committee D16.02, ASTM BOS Volume 06.04.
  • D8036 - Standard Test Method for Polyurethane Raw Materials: Determination of Dimer Ratio in Pure MDI is a new standard, now available. D8036-16 developed by Committee D20.22, ASTM BOS Volume 08.03.
  • D8042 - Test Method for Shrinkage Temperature of Wet Blue and Wet White is a new standard, now available. D8042-16 developed by Committee D31.02, ASTM BOS Volume 15.04.
  • D8043 - Standard Guide for Carbon Black—Shelf Life is a new standard, now available. D8043-16 developed by Committee D24.67, ASTM BOS Volume 09.01.
  • D8047 - Standard Test Method for Evaluation of Engine Oil Aeration Resistance in a Caterpillar C13 Direct-Injected Turbocharged Automotive Diesel Engine is a new standard, now available. D8047-16 developed by Committee D02.B0, ASTM BOS Volume 05.04.
  • D8049 - Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer is a new standard, now available. D8049-16 developed by Committee D02.14, ASTM BOS Volume 05.04.
  • D8051/D8051M - Standard Specification for Wax-Modified Asphalt Used in Roofing is a new standard, now available. D8051/D8051M-16 developed by Committee D08.03, ASTM BOS Volume 04.04.
  • E4 - Standard Practices for Force Verification of Testing Machines has been revised to E4-16 developed by Committee E28.01, ASTM BOS Volume 03.01.
  • E18 - Standard Test Methods for Rockwell Hardness of Metallic Materials has been revised to E18-16 developed by Committee E28.06, ASTM BOS Volume 03.01.
  • E23 - Standard Test Methods for Notched Bar Impact Testing of Metallic Materials has been revised to E23-16b developed by Committee E28.07, ASTM BOS Volume 03.01.
  • E102/E102M - Standard Test Method for Saybolt Furol Viscosity of Bituminous Materials at High Temperatures has been reapproved, available as E102/E102M-93(2016) developed by Committee D08.05, ASTM BOS Volume 04.04.
  • E135 - Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials has been revised to E135-16 developed by Committee E01.23, ASTM BOS Volume 03.05.
  • E168 - Standard Practices for General Techniques of Infrared Quantitative Analysis has been reinstated as E168-16 developed by Committee E13.03, ASTM BOS Volume 03.06.
  • E169 - Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis has been revised to E169-16 developed by Committee E13.01, ASTM BOS Volume 03.06.
  • E178 - Standard Practice for Dealing With Outlying Observations has been revised to E178-16 developed by Committee E11.10, ASTM BOS Volume 14.05.
  • E203 - Standard Test Method for Water Using Volumetric Karl Fischer Titration has been revised to E203-16 developed by Committee E15.01, ASTM BOS Volume 15.05.
  • E223 - Standard Test Methods for Analysis of Sulfuric Acid has been revised to E223-16 developed by Committee E15.02, ASTM BOS Volume 15.05.
  • E253 - Standard Terminology Relating to Sensory Evaluation of Materials and Products has been revised to E253-16 developed by Committee E18.01, ASTM BOS Volume 15.08.
  • E309 - Standard Practice for Eddy Current Examination of Steel Tubular Products Using Magnetic Saturation has been revised to E309-16 developed by Committee E07.07, ASTM BOS Volume 03.03.
  • E317 - Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo Testing Instruments and Systems without the Use of Electronic Measurement Instruments has been revised to E317-16 developed by Committee E07.06, ASTM BOS Volume 03.03.
  • E323 - Standard Specification for Perforated-Plate Sieves for Testing Purposes has been reapproved, available as E323-11(2016) developed by Committee E29.01, ASTM BOS Volume 14.02.
  • E363 - Standard Test Methods for Chemical Analysis of Chromium and Ferrochromium has been revised to E363-16 developed by Committee E01.01, ASTM BOS Volume 03.05.
  • E367 - Standard Test Methods for Chemical Analysis of Ferroniobium has been revised to E367-16 developed by Committee E01.01, ASTM BOS Volume 03.05.
  • E431 - Standard Guide to Interpretation of Radiographs of Semiconductors and Related Devices has been reapproved, available as E431-96(2016) developed by Committee E07.02, ASTM BOS Volume 03.03.
  • E454 - Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series) has been reapproved, available as E454-12(2016) developed by Committee E29.01, ASTM BOS Volume 14.02.
  • E473 - Standard Terminology Relating to Thermal Analysis and Rheology has been revised to E473-16 developed by Committee E37.03, ASTM BOS Volume 14.05.
  • E475 - Standard Test Method for Assay of Di-tert-Butyl Peroxide Using Gas Chromatography has been revised to E475-16 developed by Committee E15.02, ASTM BOS Volume 15.05.
  • E563 - Standard Practice for Preparation and Use of an Ice-Point Bath as a Reference Temperature has been reapproved, available as E563-11(2016) developed by Committee E20.07, ASTM BOS Volume 14.03.
  • E611 - Standard Test Methods for Low Concentrations of Diethlyene Glycol in Ethylene Glycol by Gas Chromatography has been editorially changed, available as E611-08(2015)e1 developed by Committee E15.02, ASTM BOS Volume 15.05.
  • E674 - Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series) has been reapproved, available as E674-12(2016) developed by Committee E29.01, ASTM BOS Volume 14.02.
  • E716 - Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spark Atomic Emission Spectrometry has been revised (with title change) to E716-16 developed by Committee E01.04, ASTM BOS Volume 03.05.
  • E766 - Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope has been editorially changed, available as E766-14e1 developed by Committee E04.11, ASTM BOS Volume 03.01.
  • E768 - Standard Guide for Preparing and Evaluating Specimens for Automatic Inclusion Assessment of Steel has been editorially changed, available as E768-99(2010)e1 developed by Committee E04.01, ASTM BOS Volume 03.01.
  • E795 - Standard Practices for Mounting Test Specimens During Sound Absorption Tests has been revised to E795-16 developed by Committee E33.01, ASTM BOS Volume 04.06.
  • E1064 - Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration has been revised to E1064-16 developed by Committee E15.01, ASTM BOS Volume 15.05.
  • E1079 - Standard Practice for Calibration of Transmission Densitometers has been revised to E1079-16 developed by Committee E07.01, ASTM BOS Volume 03.03.
  • E1085 - Standard Test Method for Analysis of Low-Alloy Steels by Wavelength Dispersive X-Ray Fluorescence Spectrometry has been revised (with title change) to E1085-16 developed by Committee E01.01, ASTM BOS Volume 03.05.
  • E1119 - Standard Specification for Industrial Grade Ethylene Glycol has been editorially changed, available as E1119-09(2015)e1 developed by Committee E15.02, ASTM BOS Volume 15.05.
  • E1172 - Standard Practice for Describing and Specifying a Wavelength Dispersive X-Ray Spectrometer has been revised to E1172-16 developed by Committee E01.20, ASTM BOS Volume 03.05.
  • E1184 - Standard Practice for Determination of Elements by Graphite Furnace Atomic Absorption Spectrometry has been reapproved, available as E1184-10(2016) developed by Committee E01.20, ASTM BOS Volume 03.05.
  • E1208 - Standard Practice for Fluorescent Liquid Penetrant Testing Using the Lipophilic Post-Emulsification Process has been revised to E1208-16 developed by Committee E07.03, ASTM BOS Volume 03.03.
  • E1210 - Standard Practice for Fluorescent Liquid Penetrant Testing Using the Hydrophilic Post-Emulsification Process has been revised to E1210-16 developed by Committee E07.03, ASTM BOS Volume 03.03.
  • E1245 - Standard Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis has been reapproved, available as E1245-03(2016) developed by Committee E04.14, ASTM BOS Volume 03.01.
  • E1259 - Standard Practice for Evaluation of Antimicrobials in Liquid Fuels Boiling Below 390°C has been revised to E1259-16 developed by Committee E35.15, ASTM BOS Volume 11.08.
  • E1282 - Standard Guide for Specifying the Chemical Compositions and Selecting Sampling Practices and Quantitative Analysis Methods for Metals, Ores, and Related Materials has been reapproved, available as E1282-11(2016) developed by Committee E01.20, ASTM BOS Volume 03.05.
  • E1289 - Standard Specification for Reference Specimen for Sound Transmission Loss has been reapproved, available as E1289-08(2016) developed by Committee E33.03, ASTM BOS Volume 04.06.
  • E1324 - Standard Guide for Measuring Some Electronic Characteristics of Ultrasonic Testing Instruments has been revised to E1324-16 developed by Committee E07.06, ASTM BOS Volume 03.03.
  • E1366 - Standard Practice for Standardized Aquatic Microcosms: Fresh Water has been reapproved, available as E1366-11(2016) developed by Committee E50.47, ASTM BOS Volume 11.06.
  • E1411 - Standard Practice for Qualification of Radioscopic Systems has been revised to E1411-16 developed by Committee E07.01, ASTM BOS Volume 03.03.
  • E1417/E1417M - Standard Practice for Liquid Penetrant Testing has been revised to E1417/E1417M-16 developed by Committee E07.03, ASTM BOS Volume 03.03.
  • E1444/E1444M - Standard Practice for Magnetic Particle Testing has been revised to E1444/E1444M-16 developed by Committee E07.03, ASTM BOS Volume 03.03.
  • E1473 - Standard Test Methods for Chemical Analysis of Nickel, Cobalt and High-Temperature Alloys has been revised to E1473-16 developed by Committee E01.08, ASTM BOS Volume 03.05.
  • E1571 - Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope has been editorially changed, available as E1571-11(2016)e1 developed by Committee E07.07, ASTM BOS Volume 03.03.
  • E1594 - Standard Guide for Expression of Temperature has been revised to E1594-16 developed by Committee E20.91, ASTM BOS Volume 14.03.
  • E1615 - Standard Test Method for Iron in Trace Quantities Using the FerroZine Method has been revised to E1615-16 developed by Committee E15.01, ASTM BOS Volume 15.05.
  • E1619 - Standard Test Method for Chronic Oral Toxicity Study in Rats has been reapproved, available as E1619-11(2016) developed by Committee E50.47, ASTM BOS Volume 11.06.
  • E1647 - Standard Practice for Determining Contrast Sensitivity in Radiology has been revised to E1647-16 developed by Committee E07.01, ASTM BOS Volume 03.03.
  • E1688 - Standard Guide for Determination of the Bioaccumulation of Sediment-Associated Contaminants by Benthic Invertebrates has been reapproved, available as E1688-10(2016) developed by Committee E50.47, ASTM BOS Volume 11.06.
  • E1690 - Standard Test Method for Determination of Ethanol Extractives in Biomass has been reapproved, available as E1690-08(2016) developed by Committee E48.05, ASTM BOS Volume 05.06.
  • E1750 - Standard Guide for Use of Water Triple Point Cells has been reapproved, available as E1750-10(2016) developed by Committee E20.07, ASTM BOS Volume 14.03.
  • E1787 - Standard Test Method for Anions in Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide) by Ion Chromatography has been revised to E1787-16 developed by Committee E15.01, ASTM BOS Volume 15.05.
  • E1788 - Standard Test Method for Acidity in Acrylonitrile has been revised to E1788-16 developed by Committee E15.02, ASTM BOS Volume 15.05.
  • E1790 - Standard Practice for Near Infrared Qualitative Analysis has been editorially changed, available as E1790-04(2016)e1 developed by Committee E13.11, ASTM BOS Volume 03.06.
  • E1796 - Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings has been reapproved, available as E1796-03(2016) developed by Committee E06.23, ASTM BOS Volume 04.11.
  • E1813 - Standard Practice for Measuring and Reporting Probe Tip Shape in Scanning Probe Microscopy (Withdrawn 2016) has been withdrawn, with no replacement. E1813-96(2007) developed by Committee E42.14, ASTM BOS Volume 03.06.
  • E1836/E1836M - Standard Practice for Building Floor Area Measurements for Facility Management has been reapproved, available as E1836/E1836M-09(2016) developed by Committee E06.25, ASTM BOS Volume 04.11.
  • E1867 - Standard Test Methods for Temperature Calibration of Dynamic Mechanical Analyzers has been revised to E1867-16 developed by Committee E37.10, ASTM BOS Volume 14.05.
  • E1899 - Standard Test Method for Hydroxyl Groups Using Reaction with p-Toluenesulfonyl Isocyanate (TSI) and Potentiometric Titration with Tetrabutylammonium Hydroxide has been revised to E1899-16 developed by Committee E15.01, ASTM BOS Volume 15.05.
  • E1931 - Standard Guide for Non-computed X-Ray Compton Scatter Tomography has been revised (with title change) to E1931-16 developed by Committee E07.01, ASTM BOS Volume 03.03.
  • E1961 - Standard Practice for Mechanized Ultrasonic Testing of Girth Welds Using Zonal Discrimination with Focused Search Units has been revised to E1961-16 developed by Committee E07.06, ASTM BOS Volume 03.03.
  • E2026 - Standard Guide for Seismic Risk Assessment of Buildings has been revised to E2026-16a developed by Committee E06.25, ASTM BOS Volume 04.11.
  • E2078 - Standard Guide for Analytical Data Interchange Protocol for Mass Spectrometric Data has been reapproved, available as E2078-00(2016) developed by Committee E13.15, ASTM BOS Volume 03.06.
  • E2105 - Standard Practice for General Techniques of Thermogravimetric Analysis (TGA) Coupled With Infrared Analysis (TGA/IR) has been reapproved, available as E2105-00(2016) developed by Committee E13.03, ASTM BOS Volume 03.06.
  • E2120 - Standard Practice for Performance Evaluation of the Portable X-Ray Fluorescence Spectrometer for the Measurement of Lead in Paint Films has been reapproved, available as E2120-10(2016) developed by Committee E06.23, ASTM BOS Volume 04.12.
  • E2186 - Standard Guide for Determining DNA Single-Strand Damage in Eukaryotic Cells Using the Comet Assay has been reapproved, available as E2186-02a(2016) developed by Committee E50.47, ASTM BOS Volume 11.06.
  • E2274 - Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants has been revised to E2274-16 developed by Committee E35.15, ASTM BOS Volume 11.08.
  • E2334 - Standard Practice for Setting an Upper Confidence Bound For a Fraction or Number of Non-Conforming items, or a Rate of Occurrence for Non-conformities, Using Attribute Data, When There is a Zero Response in the Sample has been editorially changed, available as E2334-09(2013)e2 developed by Committee E11.30, ASTM BOS Volume 14.05.
  • E2381 - Standard Guide for Dosimetry In Radiation Processing of Fluidized Beds and Fluid Streams (Withdrawn 2016) has been withdrawn, with no replacement. E2381- developed by Committee E61.04, ASTM BOS Volume 12.02.
  • E2385 - Standard Guide for Estimating Wildlife Exposure Using Measures of Habitat Quality has been reapproved, available as E2385-11(2016) developed by Committee E50.47, ASTM BOS Volume 11.06.
  • E2406 - Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants for Use in High Efficiency Washing Operations has been revised to E2406-16 developed by Committee E35.15, ASTM BOS Volume 11.08.
  • E2425 - Standard Test Method for Loss Modulus Conformance of Dynamic Mechanical Analyzers has been revised to E2425-16 developed by Committee E37.10, ASTM BOS Volume 14.05.
  • E2446 - Standard Practice for Manufacturing Characterization of Computed Radiography Systems has been revised to E2446-16 developed by Committee E07.01, ASTM BOS Volume 03.03.
  • E2450 - Standard Practice for Application of CaF2(Mn) Thermoluminescence Dosimeters in Mixed Neutron-Photon Environments has been revised to E2450-16 developed by Committee E10.07, ASTM BOS Volume 12.02.
  • E2470 - Standard Specification for Polyester Grade Ethylene Glycol has been editorially changed, available as E2470-09(2015)e1 developed by Committee E15.02, ASTM BOS Volume 15.05.
  • E2478 - Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic (GFRP) Materials Using Acoustic Emission has been reapproved, available as E2478-11(2016) developed by Committee E07.04, ASTM BOS Volume 03.03.
  • E2479 - Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral Longitudinal (LCR) Waves has been revised to E2479-16 developed by Committee E07.06, ASTM BOS Volume 03.03.
  • E2557 - Standard Practice for Probable Maximum Loss (PML) Evaluations for Earthquake Due-Diligence Assessments has been revised to E2557-16a developed by Committee E06.25, ASTM BOS Volume 04.12.
  • E2587 - Standard Practice for Use of Control Charts in Statistical Process Control has been revised to E2587-16 developed by Committee E11.30, ASTM BOS Volume 14.05.
  • E2669 - Standard Digital Reference Images for Titanium Castings has been revised to E2669-16 developed by Committee E07.02, ASTM BOS Volume 03.03.
  • E2671 - Standard Practice for Defining Movements, Shipments, and Transfers of Tangible Property has been reapproved, available as E2671-10(2016) developed by Committee E53.01, ASTM BOS Volume 04.12.
  • E2672 - Standard Practice for Identification and Categorization of Tooling has been revised to E2672-16 developed by Committee E53.01, ASTM BOS Volume 04.12.
  • E2680 - Standard Test Method for Appearance of Clear, Transparent Liquids (Visual Inspection Procedure) has been editorially changed, available as E2680-09(2015)e1 developed by Committee E15.02, ASTM BOS Volume 15.05.
  • E2720 - Standard Practice for Evaluation of Effectiveness of Decontamination Procedures for Air-Permeable Materials when Challenged with Biological Aerosols Containing Human Pathogenic Viruses has been revised (with title change) to E2720-16 developed by Committee E35.15, ASTM BOS Volume 11.08.
  • E2721 - Standard Practice for Evaluation of Effectiveness of Decontamination Procedures for Surfaces When Challenged with Droplets Containing Human Pathogenic Viruses has been revised (with title change) to E2721-16 developed by Committee E35.15, ASTM BOS Volume 11.08.
  • E2783 - Standard Test Method for Assessment of Antimicrobial Activity for Water Miscible Compounds Using a Time-Kill Procedure has been reapproved, available as E2783-11(2016) developed by Committee E35.15, ASTM BOS Volume 11.08.
  • E2787 - Standard Test Method for Determination of Thiodiglycol in Soil Using Pressurized Fluid Extraction Followed by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS) has been reapproved, available as E2787-11(2016) developed by Committee E54.03, ASTM BOS Volume 15.08.
  • E2838 - Standard Test Method for Determination of Thiodiglycol on Wipes by Solvent Extraction Followed by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS) has been reapproved, available as E2838-11(2016) developed by Committee E54.03, ASTM BOS Volume 15.08.
  • E2861 - Standard Test Method for Measurement of Beam Divergence and Alignment in Neutron Radiologic Beams has been revised to E2861-16 developed by Committee E07.05, ASTM BOS Volume 03.03.
  • E2866 - Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid and Pinacolyl Methylphosphonic Acid in Soil by Pressurized Fluid Extraction and Analyzed by Liquid Chromatography/Tandem Mass Spectrometry has been reapproved, available as E2866-12(2016) developed by Committee E54.03, ASTM BOS Volume 15.08.
  • E2948 - Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire has been revised to E2948-16 developed by Committee E08.05, ASTM BOS Volume 03.01.
  • E2948 - Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire has been editorially changed, available as E2948-16e1 developed by Committee E08.05, ASTM BOS Volume 03.01.
  • E2971 - Standard Test Method for Determination of Effective Boron-10 Areal Density in Aluminum Neutron Absorbers using Neutron Attenuation Measurements has been revised to E2971-16 developed by Committee E07.05, ASTM BOS Volume 03.03.
  • E2994 - Standard Test Method for Analysis of Titanium and Titanium Alloys by Spark Atomic Emission Spectrometry and Glow Discharge Atomic Emission Spectrometry (Performance-Based Method) is a new standard, now available. E2994-16 developed by Committee E01.06, ASTM BOS Volume 03.05.
  • E3008/E3008M - Standard Classification for Transportation Surface Elements—UNIFORMAT II is a new standard, now available. E3008/E3008M-16 developed by Committee E06.81, ASTM BOS Volume 04.12.
  • E3009 - Standard Test Method for Sensory Analysis—Tetrad Test has been editorially changed, available as E3009-15e1 developed by Committee E18.04, ASTM BOS Volume 15.08.
  • E3025 - Standard Guide for Tiered Approach to Detection and Characterization of Silver Nanomaterials in Textiles is a new standard, now available. E3025-16 developed by Committee E56.06, ASTM BOS Volume 14.02.
  • E3032 - Standard Guide for Climate Resiliency Planning and Strategy has been editorially changed, available as E3032-15e1 developed by Committee E50.05, ASTM BOS Volume 11.05.
  • E3039 - Standard Test Method for Determination of Crack-Tip-Opening Angle of Pipe Steels Using DWTT Specimens is a new standard, now available. E3039-16 developed by Committee E08.07, ASTM BOS Volume 03.01.
  • E3047 - Standard Test Method for Analysis of Nickel Alloys by Spark Atomic Emission Spectrometry is a new standard, now available. E3047-16 developed by Committee E01.08, ASTM BOS Volume 03.05.
  • E3054/E3054M - Standard Guide for Characterization and Use of Hygrothermal Models for Moisture Control Design in Building Envelopes is a new standard, now available. E3054/E3054M-16 developed by Committee E06.41, ASTM BOS Volume 04.12.
  • E3056 - Standard Guide for Strategic Warehousing is a new standard, now available. E3056-16 developed by Committee E53.01, ASTM BOS Volume 04.12.
  • E3060 - Standard Guide for Subvisible Particle Measurement in Biopharmaceutical Manufacturing Using Dynamic (Flow) Imaging Microscopy is a new standard, now available. E3060-16 developed by Committee E55.03, ASTM BOS Volume 14.05.
  • E3064 - Standard Test Method for Evaluating the Performance of Optical Tracking Systems that Measure Six Degrees of Freedom (6DOF) Pose is a new standard, now available. E3064-16 developed by Committee E57.02, ASTM BOS Volume 10.04.
  • F7 - Standard Specification for Aluminum Oxide Powder has been reapproved, available as F7-95(2016) developed by Committee F01.03, ASTM BOS Volume 10.04.
  • F19 - Standard Test Method for Tension and Vacuum Testing Metallized Ceramic Seals has been reapproved, available as F19-11(2016) developed by Committee F01.03, ASTM BOS Volume 10.04.
  • F44 - Standard Specification for Metallized Surfaces on Ceramic has been revised to F44-16 developed by Committee F01.03, ASTM BOS Volume 10.04.
  • F76 - Standard Test Methods for Measuring Resistivity and Hall Coefficient and Determining Hall Mobility in Single-Crystal Semiconductors has been reapproved, available as F76-08(2016) developed by Committee F01.15, ASTM BOS Volume 10.04.
  • F462 - Standard Consumer Safety Specification for Slip-Resistant Bathing Facilities (Withdrawn 2016) has been withdrawn, with no replacement. F462-79(2007) developed by Committee F15.03, ASTM BOS Volume 15.11.
  • F520 - Standard Test Method for Environmental Resistance of Aerospace Transparencies to Artificially Induced Exposures has been revised to F520-16 developed by Committee F07.08, ASTM BOS Volume 15.03.
  • F744M - Standard Test Method for Measuring Dose Rate Threshold for Upset of Digital Integrated Circuits (Metric) has been revised to F744M-16 developed by Committee F01.11, ASTM BOS Volume 10.04.
  • F748 - Standard Practice for Selecting Generic Biological Test Methods for Materials and Devices has been revised to F748-16 developed by Committee F04.16, ASTM BOS Volume 13.01.
  • F763 - Standard Practice for Short-Term Screening of Implant Materials has been reapproved, available as F763-04(2016) developed by Committee F04.16, ASTM BOS Volume 13.01.
  • F773M - Standard Practice for Measuring Dose Rate Response of Linear Integrated Circuits (Metric) has been revised to F773M-16 developed by Committee F01.11, ASTM BOS Volume 10.04.
  • F818 - Standard Terminology Relating to Spill Response Booms and Barriers has been revised (with title change) to F818-16 developed by Committee F20.11, ASTM BOS Volume 11.08.
  • F836M - Standard Specification for Style 1 Stainless Steel Metric Nuts (Metric) has been revised to F836M-16 developed by Committee F16.04, ASTM BOS Volume 01.08.
  • F837M - Standard Specification for Stainless Steel Socket Head Cap Screws [Metric] has been revised to F837M-16 developed by Committee F16.04, ASTM BOS Volume 01.08.
  • F879M - Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws (Metric) has been revised to F879M-16 developed by Committee F16.04, ASTM BOS Volume 01.08.
  • F880M - Standard Specification for Stainless Steel Socket Set Screws (Metric) has been revised to F880M-16 developed by Committee F16.04, ASTM BOS Volume 01.08.
  • F895 - Standard Test Method for Agar Diffusion Cell Culture Screening for Cytotoxicity has been reapproved, available as F895-11(2016) developed by Committee F04.16, ASTM BOS Volume 13.01.
  • F904 - Standard Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials has been revised to F904-16 developed by Committee F02.20, ASTM BOS Volume 15.10.
  • F969 - Standard Practice for Construction of Chain-Link Tennis Court Fence has been reapproved, available as F969-11(2016) developed by Committee F14.10, ASTM BOS Volume 01.06.
  • F981 - Standard Practice for Assessment of Compatibility of Biomaterials for Surgical Implants with Respect to Effect of Materials on Muscle and Insertion into Bone has been reapproved, available as F981-04(2016) developed by Committee F04.16, ASTM BOS Volume 13.01.
  • F1037 - Standard Test Method for Visual Rating of Appearance of Resilient Floors After In-Service Exposure to Foot Traffic has been editorially changed, available as F1037-10(2016)e1 developed by Committee F06.30, ASTM BOS Volume 15.04.
  • F1041 - Standard Guide for Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing has been reapproved, available as F1041-02(2016) developed by Committee F17.60, ASTM BOS Volume 08.04.
  • F1043 - Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework has been revised to F1043-16a developed by Committee F14.40, ASTM BOS Volume 01.06.
  • F1086 - Standard Guide for Structures and Responsibilities of Emergency Medical Services Systems Organizations has been reapproved, available as F1086-94(2016) developed by Committee F30.03, ASTM BOS Volume 13.02.
  • F1229 - Standard Guide for Qualification and Training of EMS Air Medical Patient Care Providers has been reapproved, available as F1229-01(2016) developed by Committee F30.02, ASTM BOS Volume 13.02.
  • F1255 - Standard Practice for Performance of Prehospital Automated Defibrillation (Withdrawn 2016) has been withdrawn, with no replacement. F1255- developed by Committee F30.02, ASTM BOS Volume 13.02.
  • F1264 - Standard Specification and Test Methods for Intramedullary Fixation Devices has been revised to F1264-16 developed by Committee F04.21, ASTM BOS Volume 13.01.
  • F1339 - Standard Guide for Organization and Operation of Emergency Medical Services Systems has been reapproved, available as F1339-92(2016) developed by Committee F30.03, ASTM BOS Volume 13.02.
  • F1534 - Standard Test Method for Determining Changes in Fire-Test-Response Characteristics of Cushioning Materials After Water Leaching has been revised to F1534-16 developed by Committee F33.05, ASTM BOS Volume 15.08.
  • F1536 - Standard Test Method for Determining Strength and Setting Time of Synthetic Water-Activated Polyurethane Fiberglass Orthopaedic Casting Tape has been editorially changed, available as F1536-95(2015)e1 developed by Committee F04.15, ASTM BOS Volume 13.01.
  • F1550 - Standard Test Method for Determination of Fire-Test-Response Characteristics of Components or Composites of Mattresses or Furniture for Use in Correctional Facilities after Exposure to Vandalism, by Employing a Bench Scale Oxygen Consumption Calorimeter has been revised to F1550-16 developed by Committee F33.05, ASTM BOS Volume 15.08.
  • F1552 - Standard Practice for Training Instructor Qualification and Certification Eligibility of Emergency Medical Dispatchers has been reapproved, available as F1552-94(2016) developed by Committee F30.02, ASTM BOS Volume 13.02.
  • F1557 - Standard Guide for Full Body Spinal Immobilization Devices (FBSID) Characteristics (Withdrawn 2016) has been withdrawn, with no replacement. F1557- developed by Committee F30.01, ASTM BOS Volume 13.02.
  • F1593 - Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum by High Mass-Resolution Glow-Discharge Mass Spectrometer has been reapproved, available as F1593-08(2016) developed by Committee F01.17, ASTM BOS Volume 10.04.
  • F1608 - Standard Test Method for Microbial Ranking of Porous Packaging Materials (Exposure Chamber Method) has been revised to F1608-16 developed by Committee F02.15, ASTM BOS Volume 15.10.
  • F1616 - Standard Guide for Scope of Performance of First Responders Who Practice in the Wilderness or Delayed or Prolonged Transport Settings has been reapproved, available as F1616-95(2016) developed by Committee F30.02, ASTM BOS Volume 13.02.
  • F1634 - Standard Practice for In-Vitro Environmental Conditioning of Polymer Matrix Composite Materials and Implant Devices has been reapproved, available as F1634-95(2016) developed by Committee F04.15, ASTM BOS Volume 13.01.
  • F1645/F1645M - Standard Test Method for Water Migration in Honeycomb Core Materials has been revised to F1645/F1645M-16 developed by Committee D30.09, ASTM BOS Volume 15.03.
  • F1646 - Standard Terminology Relating to Walkway Safety and Footwear has been revised (with title change) to F1646-16 developed by Committee F13.91, ASTM BOS Volume 15.07.
  • F1662 - Standard Test Method for Verifying the Specified Dielectric Withstand Voltage and Determining the Dielectric Breakdown Voltage of a Membrane Switch or Printed Electronic Device has been revised (with title change) to F1662-16 developed by Committee F01.18, ASTM BOS Volume 10.04.
  • F1684 - Standard Specification for Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications has been reapproved, available as F1684-06(2016) developed by Committee F01.03, ASTM BOS Volume 10.04.
  • F1709 - Standard Specification for High Purity Titanium Sputtering Targets for Electronic Thin Film Applications has been reapproved, available as F1709-97(2016) developed by Committee F01.17, ASTM BOS Volume 10.04.
  • F1710 - Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer has been reapproved, available as F1710-08(2016) developed by Committee F01.17, ASTM BOS Volume 10.04.
  • F1711 - Standard Practice for Measuring Sheet Resistance of Thin Film Conductors for Flat Panel Display Manufacturing Using a Four-Point Probe Method has been reapproved, available as F1711-96(2016) developed by Committee F01.17, ASTM BOS Volume 10.04.
  • F1736 - Standard Guide for Irradiation of Finfish and Aquatic Invertebrates Used as Food to Control Pathogens and Spoilage Microorganisms has been reapproved, available as F1736-09(2016) developed by Committee E61.05, ASTM BOS Volume 12.02.
  • F1741 - Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits has been reapproved, available as F1741-08(2016) developed by Committee F17.67, ASTM BOS Volume 08.04.
  • F1743 - Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP) has been reapproved, available as F1743-08(2016) developed by Committee F17.67, ASTM BOS Volume 08.04.
  • F1760 - Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content has been revised to F1760-16 developed by Committee F17.25, ASTM BOS Volume 08.04.
  • F1778 - Standard Guide for Selection of Skimmers for Oil-Spill Response has been reapproved, available as F1778-97(2016) developed by Committee F20.12, ASTM BOS Volume 11.08.
  • F1802 - Standard Test Method for Performance Testing of Excess Flow Valves has been revised to F1802-15 developed by Committee F17.40, ASTM BOS Volume 08.04.
  • F1818 - Standard Specification for Foot Protection for Chainsaw Users has been revised to F1818-15 developed by Committee F23.20, ASTM BOS Volume 11.03.
  • F1839 - Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopaedic Devices and Instruments has been editorially changed, available as F1839-08(2012)e1 developed by Committee F04.21, ASTM BOS Volume 13.01.
  • F1844 - Standard Practice for Measuring Sheet Resistance of Thin Film Conductors For Flat Panel Display Manufacturing Using a Noncontact Eddy Current Gage has been reapproved, available as F1844-97(2016) developed by Committee F01.17, ASTM BOS Volume 10.04.
  • F1845 - Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum-Copper, Aluminum-Silicon, and Aluminum-Copper-Silicon Alloys by High-Mass-Resolution Glow Discharge Mass Spectrometer has been reapproved, available as F1845-08(2016) developed by Committee F01.17, ASTM BOS Volume 10.04.
  • F1852 - Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength (Withdrawn 2016) has been withdrawn and replaced by F3125/F3125M developed by Committee F16.02, ASTM BOS Volume 01.08.
  • F1870 - Standard Guide for Selection of Fire Test Methods for the Assessment of Upholstered Furnishings in Detention and Correctional Facilities has been revised to F1870-16 developed by Committee F33.05, ASTM BOS Volume 15.08.
  • F1896 - Test Method for Determining the Electrical Resistivity of a Printed Conductive Material has been revised to F1896-16 developed by Committee F01.18, ASTM BOS Volume 10.04.
  • F1972 - Standard Guide for Terminology Relating to Candles and Associated Accessory Items has been revised to F1972-16 developed by Committee F15.45, ASTM BOS Volume 15.11.
  • F1992 - Standard Practice for Reprocessing of Reusable, Heat-Stable Endoscopic Accessory Instruments (EAI) Used with Flexible Endoscopes (Withdrawn 2016) has been withdrawn, with no replacement. F1992- developed by Committee F04.35, ASTM BOS Volume 13.01.
  • F2012 - Standard Consumer Safety Performance Specification for Stationary Activity Centers has been revised to F2012-16 developed by Committee F15.17, ASTM BOS Volume 15.11.
  • F2013 - Standard Test Method for Determination of Residual Acetaldehyde in Polyethylene Terephthalate Bottle Polymer Using an Automated Static Head-Space Sampling Device and a Capillary GC with a Flame Ionization Detector has been reapproved, available as F2013-10(2016) developed by Committee F02.15, ASTM BOS Volume 15.10.
  • F2026 - Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications has been revised to F2026-16 developed by Committee F04.11, ASTM BOS Volume 13.01.
  • F2082/F2082M - Standard Test Method for Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery has been revised (with designation change) to F2082/F2082M-16 developed by Committee F04.15, ASTM BOS Volume 13.01.
  • F2097 - Standard Guide for Design and Evaluation of Primary Flexible Packaging for Medical Products has been revised to F2097-16 developed by Committee F02.50, ASTM BOS Volume 15.10.
  • F2147 - Standard Practice for Guinea Pig: Split Adjuvant and Closed Patch Testing for Contact Allergens has been reapproved, available as F2147-01(2016) developed by Committee F04.16, ASTM BOS Volume 13.01.
  • F2149 - Standard Test Method for Automated Analyses of Cells—the Electrical Sensing Zone Method of Enumerating and Sizing Single Cell Suspensions has been revised to F2149-16 developed by Committee F04.43, ASTM BOS Volume 13.01.
  • F2162 - Standard Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type has been reapproved, available as F2162-01(2016) developed by Committee F34.04, ASTM BOS Volume 01.08.
  • F2163 - Standard Specification for Ring, Bearing, Inner: for Needle Roller Bearing With Drawn Outer Ring has been reapproved, available as F2163-01(2016) developed by Committee F34.04, ASTM BOS Volume 01.08.
  • F2167 - Standard Consumer Safety Specification for Infant Bouncer Seats has been revised to F2167-16 developed by Committee F15.21, ASTM BOS Volume 15.11.
  • F2170 - Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes has been revised to F2170-16 developed by Committee F06.40, ASTM BOS Volume 15.04.
  • F2194 - Standard Consumer Safety Specification for Bassinets and Cradles has been editorially changed, available as F2194-16e1 developed by Committee F15.18, ASTM BOS Volume 15.11.
  • F2236 - Standard Consumer Safety Specification for Soft Infant and Toddler Carriers has been revised to F2236-16 developed by Committee F15.21, ASTM BOS Volume 15.11.
  • F2280 - Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength (Withdrawn 2016) has been withdrawn and replaced by F3125/F3125M developed by Committee F16.02, ASTM BOS Volume 01.08.
  • F2384 - Standard Specification for Wrought Zirconium-2.5Niobium Alloy for Surgical Implant Applications (UNS R60901) has been reapproved, available as F2384-10(2016) developed by Committee F04.12, ASTM BOS Volume 13.01.
  • F2388 - Standard Consumer Safety Specification for Baby Changing Tables for Domestic Use has been revised to F2388-16 developed by Committee F15.18, ASTM BOS Volume 15.11.
  • F2400 - Standard Specification for Helmets Used in Pole Vaulting has been revised to F2400-16 developed by Committee F08.53, ASTM BOS Volume 15.07.
  • F2417 - Standard Specification for Fire Safety for Candles has been revised to F2417-16 developed by Committee F15.45, ASTM BOS Volume 15.11.
  • F2418 - Standard Specification for Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers has been revised to F2418-16 developed by Committee F17.65, ASTM BOS Volume 08.04.
  • F2439 - Standard Specification for Headgear Used in Soccer has been reapproved, available as F2439-06(2016) developed by Committee F08.53, ASTM BOS Volume 15.07.
  • F2500 - Standard Practice for Unmanned Aircraft System (UAS) Visual Range Flight Operations (Withdrawn 2016) has been withdrawn, with no replacement. F2500-07 developed by Committee F38.02, ASTM BOS Volume 15.11.
  • F2508 - Standard Practice for Validation, Calibration, and Certification of Walkway Tribometers Using Reference Surfaces has been revised to F2508-16 developed by Committee F13.10, ASTM BOS Volume 15.07.
  • F2512 - Standard Practice for Quality Assurance in the Manufacture of Light Unmanned Aircraft System (Withdrawn 2016) has been withdrawn, with no replacement. F2512-07 developed by Committee F38.01, ASTM BOS Volume 15.11.
  • F2561 - Standard Practice for Rehabilitation of a Sewer Service Lateral and Its Connection to the Main Using a One Piece Main and Lateral Cured-in-Place Liner has been revised to F2561-16 developed by Committee F17.67, ASTM BOS Volume 08.04.
  • F2592 - Standard Test Method for Measuring the Force-Displacement of a Membrane Switch has been revised to F2592-16 developed by Committee F01.18, ASTM BOS Volume 10.04.
  • F2605 - Standard Test Method for Determining the Molar Mass of Sodium Alginate by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS) has been revised to F2605-16 developed by Committee F04.42, ASTM BOS Volume 13.02.
  • F2613 - Standard Consumer Safety Specification for Children's Chairs and Stools has been editorially changed, available as F2613-16e1 developed by Committee F15.59, ASTM BOS Volume 15.11.
  • F2625 - Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry has been reapproved, available as F2625-10(2016) developed by Committee F04.15, ASTM BOS Volume 13.02.
  • F2654 - Standard Specification for Airsoft Gun Warnings has been revised to F2654-16 developed by Committee F08.27, ASTM BOS Volume 15.07.
  • F2735 - Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing has been reapproved, available as F2735-09(2016) developed by Committee F17.10, ASTM BOS Volume 08.04.
  • F2750 - Standard Test Method for Determining the Effects of Bending a Membrane Switch or Printed Electronic Device has been revised (with title change) to F2750-16 developed by Committee F01.18, ASTM BOS Volume 10.04.
  • F2771 - Standard Test Method for Determining the Luminance Curve of an Electroluminescent Lamp at Ambient Conditions has been reapproved, available as F2771-10(2016) developed by Committee F01.18, ASTM BOS Volume 10.04.
  • F2819 - Standard Test Methods for Measurement of Straightness of Bar, Rod, Tubing and Wire to be used for Medical Devices has been editorially changed, available as F2819-10(2015)e1 developed by Committee F04.15, ASTM BOS Volume 13.02.
  • F2930 - Standard Guide for Compliance with Light Sport Aircraft Standards has been revised to F2930-16 developed by Committee F37.70, ASTM BOS Volume 15.11.
  • F3083/F3083M - Standard Specification for Emergency Conditions, Occupant Safety and Accommodations has been revised to F3083/F3083M-16 developed by Committee F44.30, ASTM BOS Volume 15.11.
  • F3098 - Standard Guide for Training of Non-Wilderness Land Search Team Member is a new standard, now available. F3098-16 developed by Committee F32.03, ASTM BOS Volume 13.02.
  • F3111 - Standard Specification for Heavy Hex Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength has been revised to F3111-16 developed by Committee F16.02, ASTM BOS Volume 01.08.
  • F3118 - Standard Consumer Safety Specification for Infant Inclined Sleep Products has been revised to F3118-16 developed by Committee F15.18, ASTM BOS Volume 15.11.
  • F3121/F3121M - Standard Guide for In-Service Inspection, Maintenance, and Electrical Testing of Hand-Held Live-Line Insulating Tools (Fiberglass-Reinforced Plastic (FRP)) is a new standard, now available. F3121/F3121M-16 developed by Committee F18.35, ASTM BOS Volume 10.03.
  • F3127 - Standard Guide for Validating Cleaning Processes Used During the Manufacture of Medical Devices is a new standard, now available. F3127-16 developed by Committee F04.15, ASTM BOS Volume 13.02.
  • F3129 - Standard Guide for Characterization of Material Loss from Conical Taper Junctions in Total Joint Prostheses is a new standard, now available. F3129-16 developed by Committee F04.22, ASTM BOS Volume 13.02.
  • F3152 - Standard Test Method for Determining Abrasion Resistance of Inks and Coatings on Substrates Using Dry or Wet Abrasive Medium has been revised (with title change) to F3152-16 developed by Committee F01.18, ASTM BOS Volume 10.04.
  • F3160 - Standard Guide for Metallurgical Characterization of Absorbable Metallic Materials for Medical Implants is a new standard, now available. F3160-16 developed by Committee F04.12, ASTM BOS Volume 13.02.
  • F3175 - Standard Guide for Training and Equipping Search and Rescue Personnel Operating on Mountain Bikes (Mountain Bike SAR Endorsement) is a new standard, now available. F3175-16 developed by Committee F32.03, ASTM BOS Volume 13.02.
  • F3182 - Standard Practice for the Application of Spray-Applied Polymeric Liners Inside Pipelines for Potable Water is a new standard, now available. F3182-16 developed by Committee F17.67, ASTM BOS Volume 08.04.
  • F3183 - Standard Practice for Guided Side Bend Evaluation of Polyethylene Pipe Butt Fusion Joint is a new standard, now available. F3183-16 developed by Committee F17.40, ASTM BOS Volume 08.04.
  • F3188 - Standard Specification for Extractable Hazardous Metals in Synthetic Turf Infill Materials is a new standard, now available. F3188-16 developed by Committee F08.65, ASTM BOS Volume 15.07.
  • F3193 - Standard Guide for Training of a Land Search and Rescue Team Leader is a new standard, now available. F3193-16 developed by Committee F32.03, ASTM BOS Volume 13.02.
  • F3194 - Standard Guide for Training for Personnel Operating Small Land Off Road Vehicles (ATV-ROHV Ops Endorsement) is a new standard, now available. F3194-16 developed by Committee F32.03, ASTM BOS Volume 13.02.
  • G30 - Standard Practice for Making and Using U-Bend Stress-Corrosion Test Specimens has been reapproved, available as G30-97(2016) developed by Committee G01.06, ASTM BOS Volume 03.02.
  • G37 - Standard Practice for Use of Mattsson's Solution of pH 7.2 to Evaluate the Stress-Corrosion Cracking Susceptibility of Copper-Zinc Alloys has been reapproved, available as G37-98(2016) developed by Committee G01.06, ASTM BOS Volume 03.02.
  • G39 - Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens has been reapproved, available as G39-99(2016) developed by Committee G01.06, ASTM BOS Volume 03.02.
  • G99 - Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus has been reapproved, available as G99-05(2016) developed by Committee G02.40, ASTM BOS Volume 03.02.
  • G103 - Standard Practice for Evaluating Stress-Corrosion Cracking Resistance of Low Copper 7XXX Series Al-Zn-Mg-Cu Alloys in Boiling 6 % Sodium Chloride Solution has been reapproved, available as G103-97(2016) developed by Committee G01.06, ASTM BOS Volume 03.02.
  • G105 - Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests has been reinstated as G105-16 developed by Committee G02.30, ASTM BOS Volume 03.02.
  • G119 - Standard Guide for Determining Synergism Between Wear and Corrosion has been reapproved, available as G119-09(2016) developed by Committee G02.40, ASTM BOS Volume 03.02.
  • G131 - Standard Practice for Cleaning of Materials and Components by Ultrasonic Techniques has been reapproved, available as G131-96(2016) developed by Committee G04.02, ASTM BOS Volume 14.04.
  • G133 - Standard Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear has been reapproved, available as G133-05(2016) developed by Committee G02.40, ASTM BOS Volume 03.02.
  • G136 - Standard Practice for Determination of Soluble Residual Contaminants in Materials by Ultrasonic Extraction has been reapproved, available as G136-03(2016) developed by Committee G04.02, ASTM BOS Volume 14.04.
  • G142 - Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both has been reapproved, available as G142-98(2016) developed by Committee G01.06, ASTM BOS Volume 03.02.
  • G158 - Standard Guide for Three Methods of Assessing Buried Steel Tanks has been reapproved, available as G158-98(2016) developed by Committee G01.10, ASTM BOS Volume 03.02.
  • G186 - Standard Test Method for Determining Whether Gas-Leak-Detector Fluid Solutions Can Cause Stress Corrosion Cracking of Brass Alloys has been reapproved, available as G186-05(2016) developed by Committee G01.06, ASTM BOS Volume 03.02.
  • G214 - Standard Test Method for Integration of Digital Spectral Data for Weathering and Durability Applications has been revised to G214-16 developed by Committee G03.09, ASTM BOS Volume 14.04.

Published in international.