IEC publications

Here are recent new publications from the International Electrotechnical Commission (IEC). Hard copy and PDF formats of IEC standards are available for purchase from our website www.standards.co.nz by entering the standard number.

  • IEC 60061-1: Lamp caps and holders together with gauges for the control of interchangeability and safety. Lamp caps
    AMENDMENT 52:July 2015
  • IEC 60061-2:1969 Lamp caps and holders together with gauges for the control of interchangeability and safety. Lampholders
    AMENDMENT 49:July 2015
  • IEC 60061-3:1969 Lamp caps and holders together with gauges for the control of interchangeability and safety. Gauges
    AMENDMENT 50:July 2015
  • IEC 60068-2-60:2015 (Edition 3) Environmental testing. Tests. Test Ke: Flowing mixed gas corrosion test
  • IEC 60079-7:2015 (Edition 5) Explosive atmospheres. Equipment protection by increased safety ’e’
  • IEC 60086-1:2015 (Edition 12) Primary batteries. General
  • IEC 60118-0:2015 (Edition 3) Electroacoustics. Hearing aids. Measurement of the performance characteristics of hearing aids
  • IEC 60143-1:2015 (Edition 5) Series capacitors for power systems. General
  • IEC 60143-3:2015 (Edition 2) Series capacitors for power systems. Internal fuses
  • IEC 60172:2015 (Edition 4) Test procedure for the determination of the temperature index of enamelled and tape wrapped winding wires
  • IEC 60317-39:2015 (Edition 2) Specifications for particular types of winding wires. Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180
  • IEC 60320-1:2015 (Edition 3) Appliance couplers for household and similar general purposes. General requirements
  • IEC 60332-1-1:2004 Tests on electric and optical fibre cables under fire conditions. Test for vertical flame propagation for a single insulated wire or cable. Apparatus
    AMENDMENT 1:July 2015
  • IEC 60332-1-2:2004 Tests on electric and optical fibre cables under fire conditions. Test for vertical flame propagation for a single insulated wire or cable. Procedure for 1 kW pre-mixed flame
    AMENDMENT 1:July 2015
  • IEC 60332-1-3:2004 Tests on electric and optical fibre cables under fire conditions. Test for vertical flame propagation for a single insulated wire or cable. Procedure for determination of flaming droplets/particles
    AMENDMENT 1:July 2015
  • IEC 60335-2-3:2012 Household and similar electrical appliances. Safety. Particular requirements for electric irons
    AMENDMENT 1:July 2015
  • IEC 60335-2-17:2012 Household and similar electrical appliances. Safety. Particular requirements for blankets, pads, clothing and similar flexible heating appliances
    AMENDMENT 1:July 2015
  • IEC 60335-2-34:2012 Household and similar electrical appliances. Safety. Particular requirements for motorcompressors
    CORRIGENDUM 1:June 2015
  • IEC 60384-20:2015 (Edition 3) Fixed capacitors for use in electronic equipment. Sectional specification. Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors
  • IEC 60384-24:2015 (Edition 2) Fixed capacitors for use in electronic equipment. Sectional specification. Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte
  • IEC 60384-25:2015 (Edition 2)Fixed capacitors for use in electronic equipment. Sectional specification. Fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte
  • IEC 60455-2:2015 (Edition 3) Resin based reactive compounds used for electrical insulation. Methods of test
  • IEC 60601-2-33:2010 Medical electrical equipment. Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis
    AMENDMENT 2:June 2015
  • IEC 60601-2-37:2007 Medical electrical equipment. Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment
    AMENDMENT 1:June 2015
  • IEC 60601-2-45:2011 Medical electrical equipment. Particular requirements for the basic safety and essential performance of mammographic X-ray equipment and mammographic stereotactic devices
    AMENDMENT 1:June 2015
  • IEC 60601-2-66:2015 (Edition 2) Medical electrical equipment. Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems
  • IEC 60633:1998 Terminology for high-voltage direct current (HVDC) transmission
    AMENDMENT 2:July 2015
  • IEC 60700-1:2015 (Edition 2) Thyristor valves for high voltage direct current (HVDC) power transmission. Electrical testing
  • IEC 60793-2-30:2015 (Edition 4) Optical fibres. Product specifications. Sectional specification for category A3 multimode fibres
  • IEC 60836:2015 (Edition 3) Specifications for unused silicone insulating liquids for electrotechnical purposes
  • IEC 60947-3:2008 Low-voltage switchgear and controlgear. Switches, disconnectors, switch-disconnectors and fuse-combination units
    AMENDMENT 2:July 2015
  • IEC 60958-3:2006 Digital audio interface. Consumer applications
    AMENDMENT 2:June 2015
  • IEC 60974-10:2014 Arc welding equipment. Electromagnetic compatibility (EMC) requirements
    AMENDMENT 1:July 2015
  • IEC 61010-2-040:2015 (Edition 2) Safety requirements for electrical equipment for measurement, control, and laboratory use. Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
  • IEC 61048:2006 Auxiliaries for lamps. Capacitors for use in tubular fluorescent and other discharge lamp circuits. General and safety requirements
    AMENDMENT 1:July 2015
  • IEC 61169-52:2015 Radio-frequency connectors. Sectional specification for series MMCX RF coaxial connectors
  • IEC 61300-3-35:2015 (Edition 2) Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Visual inspection of fibre optic connectors and fibre-stub transceivers
  • IEC 61300-3-50:2013 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Crosstalk for optical spatial switches
    CORRIGENDUM 2:July 2015
  • IEC 61338-1-5:2015 Waveguide type dielectric resonators. General information and test conditions. Measurement method of conductivity at interface between conductor layer and dielectric substrate at microwave frequency
  • IEC 61340-5-3:2015 (Edition 2) Electrostatics. Protection of electronic devices from electrostatic phenomena. Properties and requirements classification for packaging intended for electrostatic discharge sensitive devices
  • IEC 61375-2-3:2015 Electronic railway equipment. Train communication network (TCN). TCN communication profile
  • IEC 61400-25-2:2015 (Edition 2) Wind turbines. Communications for monitoring and control of wind power plants. Information models
  • IEC 61400-25-3:2015 (Edition 2) Wind turbines. Communications for monitoring and control of wind power plants. Information exchange models
  • IEC 61643-22:2015 (Edition 2) Low-voltage surge protective devices. Surge protective devices connected to telecommunications and signalling networks. Selection and application principles
  • IEC 61755-3-31:2015 Fibre optic interconnecting devices and passive components. Connector optical interfaces. Connector parameters of non-dispersion shifted single mode physically contacting fibres. Angled polyphenylene sulphide rectangular ferrules
  • IEC 61755-3-32:2015 Fibre optic interconnecting devices and passive components. Connector optical interfaces. Connector parameters of non-dispersion shifted single mode physically contacting fibres. Angled thermoset epoxy rectangular ferrules
  • IEC 61784-5-4:2010 Industrial communication networks. Profiles. Installation of fieldbuses. Installation profiles for CPF 4
    AMENDMENT 1:June 2015
  • IEC 61784-5-10:2010 Industrial communication networks. Profiles. Installation of fieldbuses. Installation profiles for CPF 10
    AMENDMENT 1:June 2015
  • IEC 61784-5-12:2010 Industrial communication networks. Profiles. Installation of fieldbuses. Installation profiles for CPF 12
    AMENDMENT 1:June 2015
  • IEC 61784-5-15:2010 Industrial communication networks. Profiles. Installation of fieldbuses. Installation profiles for CPF 15
    AMENDMENT 1:June 2015
  • IEC 61800-2:2015 (Edition 2) Adjustable speed electrical power drive systems. General requirements. Rating specifications for low voltage adjustable speed a.c. power drive systems
  • IEC 61804-3:2015 (Edition 3) Function Blocks (FB) for process control and Electronic Device Description Language (EDDL). EDDL syntax and semantics
  • IEC 61804-5:2015 Function blocks (FB) for process control and electronic device description language (EDDL). EDDL Built-in library
  • IEC 61851-24:2014 Electric vehicle conductive charging system. Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging
    CORRIGENDUM 1:June 2015
  • IEC 61935-2-23:2015 Generic cabling systems. Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801. Cord and work area cord category 7. Blank detail specification
  • IEC 61935-2-24:2015 Generic cabling systems. Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801. Cord and work area cord category 7A. Blank detail specification
  • IEC 61968-6:2015 Application integration at electric utilities. System interfaces for distribution management. Interfaces for maintenance and construction
  • IEC/TS 61968-14:2015 (CD-ROM) Application integration at electric utilities. System interfaces for distribution management. MultiSpeak. CIM harmonization
  • IEC 61980-1:2015 Electric vehicle wireless power transfer (WPT) systems. General requirements
  • IEC 62005-9-1:2015 Fibre optic interconnecting devices and passive components. Reliability. Qualification of passive optical components
  • IEC 62061:2005 Safety of machinery. Functional safety of safetyrelated electrical, electronic and programmable electronic control systems
    AMENDMENT 2:June 2015
  • IEC 62087-1:2015 Audio, video, and related equipment. Determination of power consumption. General
  • IEC 62087-3:2015 Audio, video, and related equipment. Determination of power consumption. Television sets
  • IEC 62087-4:2015 Audio, video and related equipment. Determination of power consumption. Video recording equipment
  • IEC 62087-5:2015 Audio, video and related equipment. Determination of power consumption. Set top boxes (STB)
  • IEC 62087-6:2015 Audio, video and related equipment. Determination of power consumption. Audio equipment
  • IEC 62104:2015 (Edition 3) Characteristics of DAB receivers
  • IEC 62279:2015 (Edition 2) Railway applications. Communication, signalling and processing systems. Software for railway control and protection systems
  • IEC 62304:2006 Medical device software. Software life cycle processes
    AMENDMENT 1:June 2015
  • IEC 62321-6:2015 Determination of certain substances in electrotechnical products. Polybrominated biphenyls and polybrominated diphenyl ethers in polymers by gas chromatographyñmass spectrometry (GC-MS)
  • IEC 62343-1-2:2015 (Edition 2) Dynamic modules. Performance standards. Tuneable chromatic dispersion compensator (non-connectorized)
  • IEC 62379-3:2015 Common control interface for networked digital audio and video products. Video
  • IEC 62379-7:2015 Common control interface for networked digital audio and video products. Measurements
  • IEC/TR 62443-2-3:2015 Security for industrial automation and control systems. Patch management in the IACS environment
  • IEC 62443-2-4:2015 Security for industrial automation and control systems. Security program requirements for IACS service providers
  • IEC 62471-5:2015 Photobiological safety of lamps and lamp systems. Image projectors
  • IEC 62560:2011 Self-ballasted LED-lamps for general lighting services by voltage > 50 V. Safety specifications
    CORRIGENDUM 1:June 2015
  • IEC 62568:2015 Overhead lines. Method for fatigue testing of conductors
  • IEC/IEEE 62582-5:2015 Nuclear power plants. Instrumentation and control important to safety. Electrical equipment condition monitoring methods. Optical time domain reflectometry
  • IEC 62604-1:2015 Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality. Generic specification
  • IEC 62753:2015 Digital terrestrial television receivers for the DTMB system
  • IEC 62759-1:2015 Photovoltaic (PV) modules. Transportation testing. Transportation and shipping of module package units
  • IEC 62769-1:2015 Field device integration (FDI). Overview
  • IEC 62769-2:2015 Field Device Integration (FDI). FDI Client
  • IEC 62769-4:2015 Field Device Integration (FDI). FDI Packages
  • IEC 62769-6:2015 Field Device Integration (FDI). FDI Technology Mapping
  • IEC 62769-7:2015 Field Device Integration (FDI). FDI Communication Devices
  • IEC 62841-2-14:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety. Particular requirements for hand-held planers
  • IEC 62912:2015 Railway applications. Direct current signalling monostable relays of type N and type C
  • IEC 80601-2-71:2015 Medical electrical equipment. Particular requirements for the basic safety and essential performance of functional near-infrared spectroscopy (NIRS) equipment
  • CISPR 11:2015 (Edition 6) Industrial, scientific and medical equipment. Radio-frequency disturbance characteristics. Limits and methods of measurement
  • IEC/PAS 61850-9-3:2015 Communication networks and systems for power utility automation. Precision time protocol profile for power utility automation

Published in international.