British publications

British standards

The publications listed below are new and revised British standards that were made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the ’British standards withdrawn’ section.

  • BS 5682:2015 Dimensions of probes and terminal units for medical gas supply systems. Requirements
    Supersedes BS 5682:1998
  • BS 5930:2015 Code of practice for ground investigations
    Supersedes BS 5930:1999+A2:2010
  • BS 6635:2015 Manufacture of saddle trees made from wood. Specification
    Supersedes BS 6635:2003
  • BS 7273-4:2015 Code of practice for the operation of fire protection measures. Actuation of release mechanisms for doors
    Supersedes BS 7273-4:2007
  • BS 8002:2015 Code of practice for earth retaining structures
    Supersedes BS 8002:1994
  • BS 8004:2015 Code of practice for foundations
    Supersedes BS 8004:1986
  • BS 8485:2015 Code of practice for the design of protective measures for methane and carbon dioxide ground gases for new buildings
    Supersedes BS 8485:2007
  • BS 8536-1:2015 Briefing for design and construction. Code of practice for facilities management (Buildings infrastructure)
    Supersedes BS 8536:2010
  • BS 8543:2015 Complaint handling in organizations. Specification
  • BS 8618:2015 Granular carbon dioxide (CO2) absorbent material for life support, diving, hyper- and hypobaric applications. Specification
  • BS 8895-2:2015 Designing for material efficiency in building projects. Code of Practice for concept and developed design
  • BS 16000:2015 Security management. Strategic and operational guidelines
  • BS 76000:2015 Human resource. Valuing people. Management system. Requirements and guidance

 BS EN standards

The following are British standard implementations of the English language versions of European standards (ENs). The date referenced in the identifier is the date of the European standard.

  • BS EN 124-1:2015 Gully tops and manhole tops for vehicular and pedestrian areas. Definitions, classification, general principles of design, performance requirements and test methods
    Together with BS EN 124-2:2015, BS EN 124-3:2015, BS EN 124-4:2015, BS EN 124-5:2015 and BS EN 124-6:2015, it supersedes BS EN 124:1994 which is withdrawn
  • BS EN 124-2:2015 Gully tops and manhole tops for vehicular and pedestrian areas. Gully tops and manhole tops made of cast iron
    Together with BS EN 124-1:2015, BS EN 124-3:2015, BS EN 124-4:2015, BS EN 124-5:2015 and BS EN 124-6:2015, it supersedes BS EN 124:1994 which is withdrawn
  • BS EN 124-3:2015 Gully tops and manhole tops for vehicular and pedestrian areas. Gully tops and manhole tops made of steel or aluminium alloys
    Together with BS EN 124-1:2015, BS EN 124-2:2015, BS EN 124-4:2015, BS EN 124-5:2015 and BS EN 124-6:2015, it supersedes BS EN 124:1994 which is withdrawn
  • BS EN 124-4:2015 Gully tops and manhole tops for vehicular and pedestrian areas. Gully tops and manhole tops made of steel reinforced concrete
    Together with BS EN 124-1:2015, BS EN 124-2:2015, BS EN 124-3:2015, BS EN 124-5:2015 and BS EN 124-6:2015, it supersedes BS EN 124:1994 which is withdrawn
  • BS EN 124-5:2015 Gully tops and manhole tops for vehicular and pedestrian areas. Gully tops and manhole tops made of composite materials
    Together with BS EN 124-1:2015, BS EN 124-2:2015, BS EN 124-3:2015, BS EN 124-4:2015 and BS EN 124-6:2015, it supersedes BS EN 124:1994 which is withdrawn
  • BS EN 124-6:2015 Gully tops and manhole tops for vehicular and pedestrian areas. Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U)
    Together with BS EN 124-1:2015, BS EN 124-2:2015, BS EN 124-3:2015, BS EN 124-4:2015 and BS EN 124-5:2015, it supersedes BS EN 124:1994 which is withdrawn
  • BS EN 1364-1:2015 Fire resistance tests for non-loadbearing elements. Walls
    Supersedes BS EN 1364-1:1999
  • BS EN 1366-2:2015 Fire resistance tests for service installations. Fire dampers
    Supersedes BS EN 1366-2:1999
  • BS EN 1426:2015 (BS 2000-49:2015) Bitumen and bituminous binders. Determination of needle penetration
    Supersedes BS EN 1426:2007
  • BS EN 1427:2015 (BS 2000-58:2015) Bitumen and bituminous binders. Determination of the softening point. Ring and Ball method
    Supersedes BS EN 1427:2007
  • BS EN 1908:2015 Safety requirements of cableway installations designed to carry persons. Tensioning devices
    Supersedes BS EN 1908:2004
  • BS EN ISO 2061:2015 Textiles. Determination of twist in yarns. Direct counting method
    Supersedes BS EN ISO 2061:2010
  • BS EN 2266-008:2015 Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55ºC and 200ºC. DRP (pair) DRT (3 cores) DRQ (4 cores) family, multicore UV laser printable jacketed cable. Product standard
  • BS EN 2267-002:2015 Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55ºC and 260ºC. General
    Supersedes BS EN 2267-002:2012
  • BS EN 2267-011:2015 Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55ºC and 260ºC. DZA family, single and multicore assembly for use in low pressure atmosphere. Product standard
  • BS EN 2267-012:2015 Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55ºC and 260ºC. DZ family, single UV laser printable for use in low pressure atmosphere. Product standard
  • BS EN 3014:2015 Aerospace series. Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286). Classification: 1100 MPa (at ambient temperature)/650ºC
    Supersedes BS EN 3014:2001
  • BS EN 3015:2015 Aerospace series. Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286), silver plated. Classification: 1100 MPa (at ambient temperature)/650ºC
    Supersedes BS EN 3015:2001
  • BS EN 3475-307:2015 Aerospace series. Cables, electrical, aircraft use. Test methods. Corona extinction voltage
    Supersedes BS EN 3475-307:2010
  • BS EN 3745-410:2015 Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Thermal life
    Supersedes BS EN 3745-410:2007
  • BS EN ISO 3834-5:2015 Quality requirements for fusion welding of metallic materials. Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4
    Supersedes BS EN ISO 3834-5:2005
  • BS EN 4121:2015 Aerospace series. Shank nuts, serrated, selflocking, in heat resisting steel FE-PA2601 (A286), silver plated on thread. Classification: 1 100 MPa (at ambient temperature)/650ºC
    Supersedes BS EN 4121:2004
  • BS EN 4165-002:2015 Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175ºC continuous. Specification of performance and contact arrangements
    Supersedes BS EN 4165-002:2007
  • BS EN 4165-018:2015 Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175ºC continuous. Protective cover for all receptacles series 2. Product standard
    Supersedes BS EN 4165-018:2007
  • BS EN 4234:2015 Aerospace series. Clamps, worm drive. Dimensions, masses
    Supersedes BS EN 4234:2009
  • BS EN 4552:2015 Aerospace series. Pipe coupling 37º, spherical, in heat resisting steel. Straight nipples, welded end. Inch series
    Supersedes BS EN 4552:2003
  • BS EN 4560:2015 Aerospace series. Pipe coupling 37º, spherical up to 21 000 kPa. Inch series. Technical specification
    Supersedes BS EN 4560:2003
  • BS EN 4604-005:2015 Aerospace series. Cable, electrical, for signal transmission. Cable, coaxial, 75 ohmx, 200ºC, type WL. Product standard
  • BS EN 4608-004:2015 Aerospace series. Cable, electrical, fire resistant. Single and twisted multicore assembly, screened (braided) and jacketed. Operating temperatures between -65ºC and 260ºC. DW family. Lightweight. UV Laser printable. Product standard
  • BS EN 4681-005:2015 Aerospace series. Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium. AZ family, single, for use in low pressure atmosphere. Product standard
  • BS EN 4681-006:2015 Aerospace series. Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium. AZA family, single and multicore assembly, for use in low pressure atmosphere. Product standard
  • BS EN 4727:2015 Aerospace series. Standardized passenger seat weight information
  • BS EN 4728:2015 Aerospace series. Circuit breakers, single and three poles dummies. Product standard
  • BS EN 6059-100:2015 Aerospace series. Electrical cables, installation. Protection sleeves. Test methods. General
    Supersedes BS EN 6059-100:2011
  • BS EN 6113:2015 Aerospace series. Circuit breaker, connecting and attachment hardware
  • BS EN ISO 6259-3:2015 Thermoplastics pipes. Determination of tensile properties. Polyolefin pipes
  • BS EN ISO 6872:2015 Dentistry. Ceramic materials
    Supersedes BS EN ISO 6872:2008
  • BS EN ISO 8536-8:2015 Infusion equipment for medical use. Infusion sets for single use with pressure infusion apparatus
    Supersedes BS EN ISO 8536-8:2004
  • BS EN ISO 8536-9:2015 Infusion equipment for medical use. Fluid lines for single use with pressure infusion equipment
    Supersedes BS EN ISO 8536-9:2004
  • BS EN ISO 8536-10:2015 Infusion equipment for medical use. Accessories for fluid lines for single use with pressure infusion equipment
    Supersedes BS EN ISO 8536-10:2004
  • BS EN ISO 8536-11:2015 Infusion equipment for medical use. Infusion filters for single use with pressure infusion equipment
    Supersedes BS EN ISO 8536-11:2004
  • BS EN ISO 9295:2015 Acoustics. Determination of high-frequency sound power levels emitted by machinery and equipment
    Supersedes BS 7135-2:1989
  • BS EN ISO 10286:2015 Gas cylinders. Terminology
    Supersedes BS EN ISO 10286:2007
  • BS EN 10338:2015 Hot rolled and cold rolled non-coated products of multiphase steels for cold forming. Technical delivery conditions
  • BS EN 10346:2015 Continuously hot-dip coated steel flat products for cold forming. Technical delivery conditions
    Supersedes BS EN 10346:2009
  • BS EN 10359:2015 Laser welded tailored blanks. Technical delivery conditions
  • BS EN 10360:2015 Hot, warm or cold forging. Repair conditions prior to delivery
  • BS EN ISO 10504:2015 Starch derivatives. Determination of the composition of glucose syrups, fructose syrups and hydrogenated glucose syrups. Method using high-performance liquid chromatography
    Supersedes BS EN ISO 10504:2000
  • BS EN ISO 11074:2015 Soil quality. Vocabulary
    Supersedes BS ISO 11074:2005
  • BS EN ISO 11137-1:2015 Sterilization of health care products. Radiation. Requirements for development, validation and routine control of a sterilization process for medical devices
    Supersedes BS EN ISO 11137-1:2006+A1:2013
  • BS EN ISO 11137-2:2015 Sterilization of health care products. Radiation. Establishing the sterilization dose
    Supersedes BS EN ISO 11137-2:2013
  • BS EN ISO 11151-1:2015 Lasers and laser-related equipment. Standard optical components. Components for the UV, visible and near-infrared spectral ranges
    Supersedes BS EN ISO 11151-1:2000
  • BS EN ISO 11151-2:2015 Lasers and laser-related equipment. Standard optical components. Components for the infrared spectral range
    Supersedes BS EN ISO 11151-2:2000
  • BS EN ISO 11611:2015 Protective clothing for use in welding and allied processes
    Supersedes BS EN ISO 11611:2007
  • BS EN ISO 11612:2015 Protective clothing. Clothing to protect against heat and flame. Minimum performance requirements
    Supersedes BS EN ISO 11612:2008
  • BS EN 12217:2015 Doors. Operating forces. Requirements and classification
    Supersedes BS EN 12217:2003
  • BS EN ISO 12312-2:2015 Eye and face protection. Sunglasses and related eyewear. Filters for direct observation of the sun
  • BS EN 12368:2015 Traffic control equipment. Signal heads
    Supersedes BS EN 12368:2006
  • BS EN 12593:2015 (BS 2000-80:2015) Bitumen and bituminous binders. Determination of the Fraass breaking point
    Supersedes BS EN 12593:2007
  • BS EN 12606-1:2015 (BS 2000-459.1:2015) Bitumen and bituminous binders. Determination of the paraffin wax content. Method by distillation
    Supersedes BS EN 12606-1:2007
  • BS EN 12697-4:2015 Bituminous mixtures. Test methods. Bitumen recovery: Fractionating column
    Supersedes BS EN 12697-4:2005
  • BS EN 12764:2015 Sanitary appliances. Specification for whirlpool baths
    Supersedes BS EN 12764:2004+A1:2008
  • BS EN ISO 12836:2015 Dentistry. Digitizing devices for CAD/CAM systems for indirect dental restorations. Test methods for assessing accuracy
    Supersedes BS EN ISO 12836:2012
  • BS EN ISO 12966-4:2015 Animal and vegetable fats and oils. Gas chromatography of fatty acid methyl esters. Determination by capillary gas chromatography
    Supersedes BS EN ISO 15304:2002 and BS EN ISO 5508:1995
  • BS EN 13032-4:2015 Light and lighting. Measurement and presentation of photometric data of lamps and luminaires. LED lamps, modules and luminaires
  • BS EN 13223:2015 Safety requirements for cableway installations designed to carry persons. Drive systems and other mechanical equipment
    Supersedes BS EN 13223:2004
  • BS EN 13310:2015 Kitchen sinks. Functional requirements and test methods
    Supersedes BS EN 13310:2003
  • BS EN 13381-9:2015 Test methods for determining the contribution to the fire resistance of structural members. Applied fire protection systems to steel beams with web openings
  • BS EN 13407:2015 Wall-hung urinals. Functional requirements and test methods
    Supersedes BS EN 13407:2006
  • BS EN 13523-15:2015 Coil coated metals. Test methods. Metamerism
    Supersedes BS EN 13523-15:2002
  • BS EN 13523-23:2015 Coil coated metals. Test methods. Resistance to humid atmospheres containing sulfur dioxide
    Supersedes BS EN 13523-23:2002
  • BS EN 13637:2015 Building hardware. Electrically controlled exit systems for use on escape routes. Requirements and test methods
  • BS EN ISO 13802:2015 Plastics. Verification of pendulum impact testing machines. Charpy, Izod and tensile impact-testing
    Supersedes BS EN ISO 13802:2006
  • BS EN ISO 14116:2015 Protective clothing. Protection against flame. Limited flame spread materials, material assemblies and clothing
    Supersedes BS EN ISO 14116:2008
  • BS EN 14216:2015 Cement. Composition, specifications and conformity criteria for very low heat special cements
    Supersedes BS EN 14216:2004
  • BS EN 14296:2015 Sanitary appliances. Communal washing troughs
    Supersedes BS EN 14296:2005
  • BS EN 14528:2015 Bidets. Functional requirements and test methods
    Supersedes BS EN 14528:2007
  • BS EN ISO 14577-1:2015 Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method
    Supersedes BS EN ISO 14577-1:2002
  • BS EN ISO 14577-2:2015 Metallic materials. Instrumented indentation test for hardness and materials parameters. Verification and calibration of testing machines
    Supersedes BS EN ISO 14577-2:2002
  • BS EN ISO 14577-3:2015 Metallic materials. Instrumented indentation test for hardness and materials parameters. Calibration of reference blocks
    Supersedes BS EN ISO 14577-3:2002
  • BS EN 14688:2015 Sanitary appliances. Wash basins. Functional requirements and test methods
    Supersedes BS EN 14688:2006
  • BS EN ISO 15197:2015 In vitro diagnostic test systems. Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus
    Supersedes BS EN ISO 15197:2013
  • BS EN 15329:2015 Railway applications. Braking. Brake block holder and brake shoe key for railway vehicles
  • BS EN 15436-2:2015 Road service area maintenance equipment. Performance assessment
    Supersedes BS EN 15436-2:2008
  • BS EN 15436-3:2015 Road service area maintenance equipment. Classification
    Supersedes DD CEN/TS 15436-3:2009
  • BS EN ISO 15848-1:2015 Industrial valves. Measurement, test and qualification procedures for fugitive emissions. Classification system and qualification procedures for type testing of valves
    Supersedes BS EN ISO 15848-1:2006
  • BS EN ISO 15848-2:2015 Industrial valves. Measurement, test and qualification procedures for fugitive emissions. Production acceptance test of valves
    Supersedes BS EN ISO 15848-2:2006
  • BS EN 15969-1:2015 Tanks for transport of dangerous goods. Digital interface for the data transfer between tank vehicle and with stationary facilities. Protocol specification. Control, measurement and event data
    Supersedes BS EN 15969-1:2011
  • BS EN 16187:2015 Foodstuffs. Determination of fumonisin B1 and fumonisin B2 in processed maize containing foods for infants and young children. HPLC method with immunoaffinity column cleanup and fluorescence detection after pre-column derivatisation
    Supersedes DD CEN/TS 16187:2011
  • BS EN 16211:2015 Ventilation for buildings. Measurement of air flows on site. Methods
  • BS EN 16270:2015 (BS 2000-606:2015) Automotive fuels. Determination of highboiling components including fatty acid methyl esters in petrol and ethanol (E85) automotive fuel. Gas chromatographic method
    Supersedes BS EN 16270:2012
  • BS EN 16451:2015 Railway applications. Braking. Brake pad holder
  • BS EN 16452:2015 Railway applications. Braking. Brake blocks
  • BS EN 16572:2015 Conservation of cultural heritage. Glossary of technical terms concerning mortars for masonry, renders and plasters used in cultural heritage
  • BS EN ISO 16610-22:2015 Geometrical product specifications (GPS). Filtration. Linear profile filters: Spline filters
    Supersedes DD ISO/TS 16610-22:2006
  • BS EN ISO 16610-41:2015 Geometrical product specifications (GPS). Filtration. Morphological profile filters: Disk and horizontal line-segment filters
    Supersedes DD ISO/TS 16610-41:2006
  • BS EN ISO 16610-61:2015 Geometrical product specification (GPS). Filtration. Linear areal filters. Gaussian filters
  • BS EN 16627:2015 Sustainability of construction works. Assessment of economic performance of buildings. Calculation methods
  • BS EN ISO 16649-3:2015 Microbiology of the food chain. Horizontal method for the enumeration of betaglucuronidase-positive Escherichia coli. Detection and most probable number technique using 5-bromo-4-chloro-3-indolyl-β-Dglucuronide
    Supersedes DD ISO/TS 16649-3:2005
  • BS EN 16661:2015 Road vehicles and Tyre Pressure Gauges (TPG). Interoperability between Tyre Information Systems (TIS) and TPG. Interfaces and Requirements
  • BS EN 16664:2015 Playing field equipment. Lightweight goals. Functional, safety requirements and test methods
  • BS EN 16686:2015 Osteopathic healthcare provision
  • BS EN 16687:2015 Construction products. Assessment of release of dangerous substances. Terminology
  • BS EN ISO 16903:2015 Petroleum and natural gas industries. Characteristics of LNG, influencing the design, and material selection
    Supersedes BS EN 1160:1997
  • BS EN ISO 16954:2015 Dentistry. Test methods for dental unit waterline biofilm treatment
  • BS EN ISO/IEC 17021-1:2015 Conformity assessment. Requirements for bodies providing audit and certification of management systems. Requirements
    Supersedes BS EN ISO/IEC 17021:2011
  • BS EN ISO 17962:2015 Agricultural machinery. Equipment for sowing. Minimization of the environmental effects of fan exhaust from pneumatic systems
  • BS EN ISO 18218-1:2015 Leather. Determination of ethoxylated alkylphenols. Direct method
  • BS EN ISO 18218-2:2015 Leather. Determination of ethoxylated alkylphenols. Indirect method
  • BS EN ISO 18323:2015 Jewellery. Consumer confidence in the diamond industry
  • BS EN ISO 18563-1:2015 Non-destructive testing. Characterization and verification of ultrasonic phased array equipment. Instruments
  • BS EN ISO 20361:2015 Liquid pumps and pump units. Noise test code. Grades 2 and 3 of accuracy
    Supersedes BS EN ISO 20361:2009
  • BS EN ISO 23640:2015 In vitro diagnostic medical devices. Evaluation of stability of in vitro diagnostic reagents
    Supersedes BS EN ISO 23640:2013
  • BS EN ISO 25178-606:2015 Geometrical product specification (GPS). Surface texture: Areal. Nominal characteristics of noncontact (focus variation) instruments
  • BS EN ISO 27971:2015 Cereals and cereal products. Common wheat (Triticum aestivum L.). Determination of alveograph properties of dough at constant hydration from commercial or test flours and test milling methodology
    Supersedes BS EN ISO 27971:2008
  • BS EN 50156-1:2015 Electrical equipment for furnaces and ancillary equipment. Requirements for application design and installation
    Supersedes BS EN 50156-1:2004
  • BS EN 50156-2:2015 Electrical equipment for furnaces and ancillary equipment. Requirements for design, development and type approval of safety devices and subsystems
  • BS EN 50216-4:2015 Power transformer and reactor fittings. Basic accessories (earthing terminal, drain and filling devices, thermometer pocket, wheel assembly)
    Supersedes BS EN 50216-4:2002 which remains current
  • BS EN 50223:2015 Stationary electrostatic application equipment for ignitable flock material. Safety requirements
    Supersedes BS EN 50223:2010
  • BS EN 50341-2-9:2015 Overhead electrical lines exceeding AC 1 kV. National Normative Aspects (NNA) for Great Britain and Northern Ireland (based on EN 50341-1:2012)
    Supersedes BS EN 50341-3:2001 and BS EN 50423-3:2005
  • BS EN 50342-7:2015 Lead acid starter batteries. General requirements and methods of tests for motorcycle batteries
  • BS EN 50491-11:2015 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS). Smart Metering. Application Specifications. Simple External Consumer Display
  • BS EN 50625-2-2:2015 Collection, logistics & treatment requirements for WEEE. Treatment requirements for WEEE containing CRTs and flat panel displays
  • BS EN 50629:2015 Energy performance of large power transformers (Um > 36 kV or Sr ≥ 40 MVA)
  • BS EN 55032:2015 Electromagnetic compatibility of multimedia equipment. Emission Requirements
    Supersedes BS EN 55032:2012 which remains current
  • BS EN 60063:2015 Preferred number series for resistors and capacitors
    Supersedes BS 2488:1966
  • BS EN 60115-8-1:2015 Fixed resistors for use in electronic equipment. Blank detail specification: Fixed surface mount (SMD) low power film resistors for general electronic equipment, classification level G
  • BS EN 60172:2015 Test procedure for the determination of the temperature index of enamelled and tape wrapped winding wires
    Supersedes BS EN 60172:1994+A2:2010
  • BS EN 60286-2:2015 Packaging of components for automatic handling. Packaging of components with unidirectional leads on continuous tapes
    Supersedes BS EN 60286-2:2009
  • BS EN 60335-2-6:2015 Household and similar electrical appliances. Safety. Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances
    Supersedes BS EN 60335-2-6:2003+A13:2013 which remains current
  • BS EN 60384-23:2015 Fixed capacitors for use in electronic equipment. Sectional specification. Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors
    Supersedes BS EN 60384-23:2005
  • BS EN 60398:2015 Installations for electroheating and electromagnetic processing. General performance test methods
    Supersedes BS EN 60398:1999 and PD IEC/TS 62796:2013
  • BS EN 60404-5:2015 Magnetic materials. Permanent magnet (magnetically hard) materials. Methods of measurement of magnetic properties
    Supersedes BS EN 60404-5:2007
  • BS EN 60404-8-1:2015 Magnetic materials. Specifications for individual materials. Magnetically hard materials
    Supersedes BS 6404-8.1:2001
  • BS EN 60519-1:2015 Safety in installations for electroheating and electromagnetic processing. General requirements
    Supersedes BS EN 60519-1:2011
  • BS EN 60601-1-11:2015 Medical electrical equipment. General requirements for basic safety and essential performance. Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment
    Supersedes BS EN 60601-1-11:2010 which remains current
  • BS EN 60601-1-12:2015 Medical electrical equipment. General requirements for basic safety and essential performance. Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment
  • BS EN 60601-2-3:2015 Medical electrical equipment. Particular requirements for the basic safety and essential performance of short-wave therapy equipment
    Supersedes BS EN 60601-2-3:1993 which remains current
  • BS EN 60601-2-6:2015 Medical electrical equipment. Particular requirements for the basic safety and essential performance of microwave therapy equipment
    Supersedes BS 5724-2.6:1985 which remains current
  • BS EN 60601-2-8:2015 Medical electrical equipment. Particular requirements for the basic safety and essential performance of therapeutic X-ray equipment operating in the range 10 kV to 1 MV
    Supersedes BS EN 60601-2-8:1998 which remains current
  • BS EN 60601-2-10:2015 Medical electrical equipment. Particular requirements for the basic safety and essential performance of nerve and muscle stimulators
    Supersedes BS EN 60601-2-10:2001 which remains current
  • BS EN 60601-2-11:2015 Medical electrical equipment. Particular requirements for the basic safety and essential performance of gamma beam therapy equipment
    Supersedes BS EN 60601-2-11:1998 which remains current
  • BS EN 60601-2-16:2015 Medical electrical equipment. Particular requirements for the basic safety and essential performance of haemodialysis, haemodiafiltration and haemofiltration equipment
    Supersedes BS EN 60601-2-16:1998
  • BS EN 60601-2-17:2015 Medical electrical equipment. Particular requirements for the basic safety and essential performance of automatically-controlled brachytherapy afterloading equipment
    Supersedes BS EN 60601-2-17:2004 which remains current
  • BS EN 60601-2-24:2015 Medical electrical equipment. Particular requirements for the basic safety and essential performance of infusion pumps and controllers
    Supersedes BS EN 60601-2-24:1998 which remains current
  • BS EN 60601-2-26:2015 Medical electrical equipment. Particular requirements for the basic safety and essential performance of electroencephalographs
    Supersedes BS EN 60601-2-26:2003 which remains current
  • BS EN 60695-11-20:2015 Fire hazard testing. Test flames. 500 W flame test methods
    Supersedes BS EN 60695-11-20:1999
  • BS EN 60875-1:2015 Fibre optic interconnecting devices and passive components. Non-wavelength-selective fibre optic branching devices. Generic specification
    Supersedes BS EN 60875-1:2010
  • BS EN 60904-2:2015 Photovoltaic devices. Requirements for photovoltaic reference devices
    Supersedes BS EN 60904-2:2007
  • BS EN 61010-031:2015 Safety requirements for electrical equipment for measurement, control and laboratory use. Safety requirements for hand-held probe assemblies for electrical measurement and test
    Supersedes BS EN 61010-031:2002+A1:2008 which remains current
  • BS EN 61121:2013 Tumble dryers for household use. Methods for measuring the performance
    Supersedes BS EN 61121:2005
  • BS EN 61169-47:2015 Radio-frequency connectors. Sectional specification for radio-frequency coaxial connectors with clamp coupling, typically for use in 75 W cable networks (type F-Quick)
    Supersedes BS EN 61169-47:2012
  • BS EN 61290-1-1:2015 Optical amplifiers. Test methods. Power and gain parameters. Optical spectrum analyser method
    Supersedes BS EN 61290-1-1:2006
  • BS EN 61760-4:2015 Surface mounting technology. Classification, packaging, labelling and handling of moisture sensitive devices
  • BS EN 61788-21:2015 Superconductivity. Superconducting wires. Test methods for practical superconducting wires. General characteristics and guidance
  • BS EN 62047-15:2015 Semiconductor devices. Micro-electromechanical devices. Test method of bonding strength between PDMS and glass
  • BS EN 62047-16:2015 Semiconductor devices. Micro-electromechanical devices. Test methods for determining residual stresses of MEMS films. Wafer curvature and cantilever beam deflection methods
  • BS EN 62047-17:2015 Semiconductor devices. Micro-electromechanical devices. Bulge test method for measuring mechanical properties of thin films
  • BS EN 62135-1:2015 Resistance welding equipment. Safety requirements for design, manufacture and installation
    Supersedes BS EN 62135-1:2008
  • BS EN 62386-201:2015 Digital addressable lighting interface. Particular requirements for control gear. Fluorescent lamps (device type 0)
    Supersedes BS EN 62386-201:2009 which remains current
  • BS EN 62620:2015 Secondary cells and batteries containing alkaline or other non-acid electrolytes. Secondary lithium cells and batteries for use in industrial applications
  • BS EN 62657-2:2015 Industrial communication networks. Wireless communication networks. Coexistence management
    Supersedes DD IEC/TS 62657-2:2011
  • BS EN 62670-2:2015 Photovoltaic concentrators (CPV). Performance testing. Energy measurement
  • BS EN 62733:2015 Programmable components in electronic lamp controlgear. General and safety requirements
  • BS EN 62769-1:2015 Field Device Integration (FDI). Overview
  • BS EN 62769-2:2015 Field Device Integration (FDI). FDI Client
  • BS EN 62769-3:2015 Devices and integration in enterprise systems. Field Device Integration. FDI Server
  • BS EN 62769-4:2015 Field Device Integration (FDI). FDI Packages
  • BS EN 62769-5:2015 Field Device Integration (FDI). FDI Information Model
  • BS EN 62769-6:2015 Field Device Integration (FDI). FDI Technology Mapping
  • BS EN 62769-7:2015 Field Device Integration (FDI). FDI Communication Devices
  • BS EN 62769-101-1:2015 Field Device Integration (FDI). Profiles. Foundation Fieldbus H1
  • BS EN 62769-101-2:2015 Field Device Integration (FDI). Profiles. Foundation Fieldbus HSE
  • BS EN 62769-109-1:2015 Field Device Integration (FDI). Profiles. HART and WirelessHART
  • BS EN 62810:2015 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods
  • BS EN 62811:2015 AC and/or DC-supplied electronic controlgear for discharge lamps (excluding fluorescent lamps). Performance requirements for low frequency squarewave operation
  • BS EN 62817:2015 Photovoltaic systems. Design qualification of solar trackers
  • BS EN 62841-2-9:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety. Particular requirements for hand-held tappers and threaders
    Supersedes BS EN 60745-2-9:2009 which remains current
  • BS EN 62875:2015 Multimedia systems and equipment. Multimedia e-publishing and e-book technologies. Printing specification of texture map for auditory presentation of printed texts
  • BS EN 62878-1-1:2015 Device embedded substrate. Generic specification. Test methods
  • BS EN 62889:2015 Digital video interface. Gigabit video interface for multimedia systems
  • BS EN 80601-2-58:2015 Medical electrical equipment. Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery
    Supersedes BS EN 80601-2-58:2009+A11:2011 which remains current
  • BS EN 80601-2-60:2015 Medical electrical equipment. Particular requirements for the basic safety and essential performance of dental equipment

BS ENs implemented by amendment

  • BS EN ISO 9698:2015 Water quality. Determination of tritium activity concentration. Liquid scintillation counting method
    Implementation of European Standard EN ISO 9698 by amendment to BS ISO 9698:2010
  • BS EN ISO 12404:2015 Soil quality. Guidance on the selection and application of screening methods
    Implementation of European Standard EN ISO 12404 by amendment to BS ISO 12404:2011
  • BS EN ISO 13196:2015 Soil quality. Screening soils for selected elements by energy-dispersive X-ray fluorescence spectrometry using a handheld or portable instrument
    Implementation of European Standard EN ISO 13196 by amendment to BS ISO 13196:2013
  • BS EN 62676-4:2015 Video surveillance systems for use in security applications. Application guidelines
    Implementation of European Standard EN 62676-4 by amendment to BS IEC 62676-4:2014
  • PD CEN ISO/TS 12025:2015 Nanomaterials. Quantification of nano-object release from powders by generation of aerosols
    Implementation of European Standard CEN ISO/TS 12025 by amendment to PD ISO/TS 12025:2012

BS implementations

BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. The date referenced in the identifier is the date of the international standard.

  • BS ISO 34-1:2015 Rubber, vulcanized or thermoplastic. Determination of tear strength. Trouser, angle and crescent test pieces
    Supersedes BS ISO 34-1:2010
  • BS ISO 34-2:2015 Rubber, vulcanized or thermoplastic. Determination of tear strength. Small (Delft) test pieces
    Supersedes BS ISO 34-2:2011
  • BS ISO 128-43:2015 Technical product documentation (TPD). General principles of presentation. Projection methods in building drawings
  • BS ISO 302:2015 Pulps. Determination of Kappa number
    Supersedes BS ISO 302:2004
  • BS ISO 502:2015 Coal. Determination of caking power. Gray-King coke test
  • BS ISO 1125:2015 Rubber compounding ingredients. Carbon black. Determination of ash
    Supersedes BS ISO 1125:1999+A1:2011
  • BS ISO 1658:2015 Natural rubber (NR). Evaluation procedure
    Supersedes BS ISO 1658:2009
  • BS ISO 1762:2015 Paper, board and pulps. Determination of residue (ash) on ignition at 525ºC
    Supersedes BS ISO 1762:2001
  • BS ISO 2028:2015 Synthetic rubber latex. Preparation of dry polymer
    Supersedes BS ISO 2028:1999
  • BS ISO 2385:2015 Packed cork. Virgin cork, raw reproduction cork, ramassage, gleanings, burnt cork, boiled reproduction cork and raw corkwaste. Sampling to determine moisture content
    Supersedes BS ISO 2385:1993
  • BS ISO 2386:2015 Packed cork. Virgin cork, raw reproduction cork, ramassage, gleanings, burnt cork, boiled reproduction cork and raw corkwaste. Determination of moisture content
  • BS ISO 2834-2:2015 Graphic technology. Laboratory preparation test prints. Liquid printing inks
    Supersedes BS ISO 2834-2:2007
  • BS ISO 2939:2015 Cinematography. Picture image area on 35 mm motion-picture release prints. Position and dimensions and analogue and digital photographic sound to picture record displacement
    Supersedes BS ISO 2939:2002
  • BS ISO 2969:2015 Cinematography. B-chain electroacoustic response of motion-picture control rooms and indoor theatres. Specifications and measurements
    Supersedes BS 5550-7.4.1:1990
  • BS ISO 3006:2015 Road vehicles. Passenger car wheels for road use. Test methods
  • BS ISO 3600:2015 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Operator’s manuals. Content and format
  • BS ISO 4689-2:2015 Iron ores. Determination of sulfur content. Combustion/titration method
    Supersedes BS ISO 4689-2:2004
  • BS ISO 4689-3:2015 Iron ores. Determination of sulfur content. Combustion/infrared method
    Supersedes BS ISO 4689-3:2004
  • BS ISO 5208:2015 Industrial valves. Pressure testing of metallic valves
    Supersedes BS ISO 5208:2008
  • BS ISO 6487:2015 Road vehicles. Measurement techniques in impact tests. Instrumentation
    Supersedes BS ISO 6487:2012
  • BS ISO 6495-1:2015 Animal feeding stuffs. Determination of watersoluble chlorides content. Titrimetric method
    Supersedes BS 5766-5:1999
  • BS ISO 6519:2015 Diesel engines. Fuel injection pumps. Tapers for shaft ends and hubs
    Supersedes BS ISO 6519:2004
  • BS ISO 7530-1:2015 Nickel alloys. Flame atomic absorption spectrometric analysis. Determination of cobalt, chromium, copper, iron and manganese
    Supersedes BS 7455-1:1991, BS 7455-2:1991, BS 7455-3:1991, BS 7455-4:1991, BS 7455-5:1991 and BS 7455-6:1991
  • BS ISO 8036:2015 Microscopes. Immersion liquids for light microscopy
    Supersedes BS ISO 8036:2006
  • BS ISO 8157:2015 Fertilizers and soil conditioners. Vocabulary
  • BS ISO 8177:2015 Aerospace. Omega clamps (saddle clamps) for fluid systems. Dimensions
    Supersedes BS M 64:1987
  • BS ISO 8178-7:2015 Reciprocating internal combustion engines. Exhaust emission measurement. Engine family determination
    Supersedes BS ISO 8178-7:1996
  • BS ISO 8783:2015 Alpine skis. Guidelines for conducting slope performance tests
  • BS ISO 9523:2015 Touring ski-boots for adults. Interface with touring ski-bindings. Requirements and test methods
    Supersedes BS ISO 9523:2008
  • BS ISO 9928-1:2015 Cranes. Crane operating manual. General
  • BS ISO/IEC 9995-11:2015 Information technology. Keyboard layouts for office systems. Functionality of dead keys and repertoires of characters entered by dead keys
  • BS ISO 10109:2015 Optics and photonics. Guidance for the selection of environmental tests
    Supersedes BS ISO 10109:2014
  • BS ISO 10110-5:2015 Optics and photonics. Preparation of drawings for optical elements and systems. Surface form tolerances
    Supersedes BS ISO 10110-5:2007
  • BS ISO 10110-6:2015 Optics and photonics. Preparation of drawings for optical elements and systems. Centring tolerances
    Supersedes BS ISO 10110-6:1996
  • BS ISO 10203:2015 Iron ores. Determination of calcium. Flame atomic absorption spectrometric method
    Supersedes BS ISO 10203:2006
  • BS ISO 10258:2015 Copper sulfide concentrates. Determination of copper content. Titrimetric methods
  • BS ISO 10958-2:2015 Snowboards. Binding mounting area. Requirements and test methods for snowboards with inserts
  • BS ISO 11354-2:2015 Advanced automation technologies and their applications. Requirements for establishing manufacturing enterprise process interoperability. Maturity model for assessing enterprise interoperability
  • BS ISO 11451-1:2015 Road vehicles. Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy. General principles and terminology
    Supersedes BS ISO 11451-1:2005+A1:2008
  • BS ISO 11451-2:2015 Road vehicles. Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy. Off-vehicle radiation sources
  • BS ISO 11451-3:2015 Road vehicles. Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy. On-board transmitter simulation
    Supersedes BS ISO 11451-3:2007
  • BS ISO 11452-1:2015 Road vehicles. Component test methods for electrical disturbances from narrowband radiated electromagnetic energy. General principles and terminology
  • BS ISO 11452-8:2015 Road vehicles. Component test methods for electrical disturbances from narrowband radiated electromagnetic energy. Immunity to magnetic fields
    Supersedes BS ISO 11452-8:2007
  • BS ISO 11660-2:2015 Cranes. Access, guards and restraints. Mobile cranes
  • BS ISO/IEC 11693-3:2015 Identification cards. Optical memory cards. Authentication techniques
  • BS ISO/IEC 11694-3:2015 Identification cards. Optical memory cards. Linear recording method. Optical properties and characteristics
    Supersedes BS ISO/IEC 11694-3:2008
  • BS ISO 11999-1:2015 PPE for firefighters. Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures. General
  • BS ISO 11999-3:2015 PPE for firefighters. Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures. Clothing
  • BS ISO 11999-4:2015 PPE for firefighters. Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures. Gloves
  • BS ISO 12891-1:2015 Retrieval and analysis of surgical implants. Retrieval and handling
    Supersedes BS ISO 12891-1:2011
  • BS ISO 12900:2015 Hard coal. Determination of abrasiveness
    Supersedes BS 1016-111:1998
  • BS ISO 13164-4:2015 Water quality. Radon-222. Test method using two-phase liquid scintillation counting
  • BS ISO 13168:2015 Water quality. Simultaneous determination of tritium and carbon 14 activities. Test method using liquid scintillation counting
  • BS ISO 14084-1:2015 Process diagrams for power plants. Specification for diagrams
  • BS ISO 15247:2015 Zinc sulfide concentrates. Determination of silver content. Acid dissolution and flame atomic absorption spectrometric method
  • BS ISO 15519-2:2015 Specifications for diagrams for process industry. Measurement and control
  • BS ISO 15633:2015 Iron ores. Determination of nickel. Flame atomic absorption spectrometric method
    Supersedes BS ISO 15633:2009
  • BS ISO 15825:2015 Rubber compounding ingredients. Carbon black. Determination of aggregate size distribution by disc centrifuge photosedimentometry
    Supersedes BS ISO 15825:2004
  • BS ISO 16778:2015 Water quality. Calanoid copepod early-life stage test with Acartia tonsa
  • BS ISO 17093:2015 Corrosion of metals and alloys. Guidelines for corrosion test by electrochemical noise measurements
  • BS ISO 17123-8:2015 Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. GNSS field measurement systems in real-time kinematic (RTK)
  • BS ISO 17318:2015 Fertilizers and soil conditioners. Determination of arsenic, cadmium, chromium, lead and mercury contents
  • BS ISO 17322:2015 Fertilizers and soil conditioners. Analytical methods for Sulfur Coated Urea (SCU)
  • BS ISO 17323:2015 Fertilizers and soil conditioners. Sulfur Coated Urea (SCU). General requirements
  • BS ISO 17842-1:2015 Safety of amusement rides and amusement devices. Design and manufacture
  • BS ISO 17842-3:2015 Safety of amusement rides and amusement devices. Requirements for inspection during design, manufacture, operation and use
  • BS ISO 17850:2015 Photography. Digital cameras. Geometric distortion (GD) measurements
  • BS ISO 17972-4:2015 Graphic technology. Colour data exchange format (CxF/X). Spot colour characterisation data (CxF/X-4)
  • BS ISO 18069:2015 Corrosion of metals and alloys. Method for determination of the uniform corrosion rate of stainless steels and nickel based alloys in liquids
  • BS ISO 18086:2015 Corrosion of metals and alloys. Determination of AC corrosion. Protection criteria
  • BS ISO 18314-1:2015 Analytical colorimetry. Practical colour measurement
  • BS ISO 18314-2:2015 Analytical colorimetry. Saunderson correction, solutions of the Kubelka-Munk equation, tinting strength, hiding power
  • BS ISO 18314-3:2015 Analytical colorimetry. Special indices
  • BS ISO 18337:2015 Surface chemical analysis. Surface characterization. Measurement of the lateral resolution of a confocal fluorescence microscope
  • BS ISO/IEC 18477-1:2015 Information technology. Scalable compression and coding of continuous-tone still images. Scalable compression and coding of continuous tone still images
  • BS ISO 18619:2015 Image technology colour management. Black point compensation
  • BS ISO 18664:2015 Traditional Chinese Medicine. Determination of heavy metals in herbal medicines used in Traditional Chinese Medicine
  • BS ISO 18843:2015 Aluminium oxide primarily used for the production of aluminium. Method for the determination of flow time
  • BS ISO 18852:2015 Rubber compounding ingredients. Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)
    Supersedes BS ISO 18852:2012
  • BS ISO 19012-3:2015 Microscopes. Designation of microscope objectives. Spectral transmittance
  • BS ISO 19150-2:2015 Geographic information. Ontology. Rules for developing ontologies in the Web Ontology Language (OWL)
  • BS ISO 19229:2015 Gas analysis. Purity analysis and the treatment of purity data
  • BS ISO 19242:2015 Rubber. Determination of total sulfur content by ion chromatography
  • BS ISO 19632:2015 Aerospace series. Fitting end, 24º internal cone, external thread, flareless type extra fine thread pitch inch series. Design standard
  • BS ISO/IEC 19763-1:2015 Information technology. Metamodel framework for interoperability (MFI). Framework
    Supersedes BS ISO/IEC 19763-1:2007
  • BS ISO 21214:2015 Intelligent transport systems. Communications access for land mobiles (CALM). Infra-red systems
    Supersedes BS ISO 21214:2006
  • BS ISO 21504:2015 Project, programme and portfolio management. Guidance on portfolio management
  • BS ISO 21561-1:2015 Styrene-butadiene rubber (SBR). Determination of the microstructure of solution-polymerized SBR. 1H-NMR and IR with cast-film method
    Supersedes BS ISO 21561:2005+A1:2010 which remains current
  • BS ISO 21613:2015 (U, Pu)O2 Powders and sintered pellets. Determination of chlorine and fluorine
  • BS ISO 22322:2015 Societal security. Emergency management. Guidelines for public warning
  • BS ISO 22324:2015 Societal security. Emergency management. Guidelines for colour-coded alerts
  • BS ISO/IEC 23001-11:2015  Information technology. MPEG systems technologies. Energy-efficient media consumption (green metadata)
  • BS ISO/IEC/IEEE 23026:2015 Systems and software engineering. Engineering and management of websites for systems, software, and services information
    Supersedes BS ISO/IEC 23026:2006
  • BS ISO/IEC 26300-1:2015 Information technology. Open Document Format for Office Applications (OpenDocument) v1.2. OpenDocument Schema
    Supersedes BS ISO/IEC 26300:2006+A1:2012
  • BS ISO/IEC 26300-2:2015 Information technology. Open Document Format for Office Applications (OpenDocument) v1.2. Recalculated Formula (OpenFormula) Format
    Supersedes BS ISO/IEC 26300:2006+A1:2012
  • BS ISO/IEC 26300-3:2015 Information technology. Open Document Format for Office Applications (OpenDocument) v1.2. Packages
    Supersedes BS ISO/IEC 26300:2006+A1:2012
  • BS ISO/IEC 27041:2015 Information technology. Security techniques. Guidance on assuring suitability and adequacy of incident investigative method
  • BS ISO/IEC 27042:2015 Information technology. Security techniques. Guidelines for the analysis and interpretation of digital evidence
  • BS ISO 27307:2015 Thermal spraying. Evaluation of adhesion/cohesion of thermal sprayed ceramic coatings by transverse scratch testing
  • BS ISO/IEC 29341-3-10:2015 Information technology. UPnP Device Architecture. Audio Video Device Control Protocol. Audio Video Transport Service
  • BS ISO/IEC 29341-7-11:2015 Information technology. UPnP Device Architecture. Lighting Device Control Protocol. Switch Power Service
  • BS ISO/IEC 29341-12-1:2015 Information technology. UPnP Device Architecture. Remote User Interface Device Control Protocol. Remote User Interface Client Device
  • BS ISO/IEC 29341-12-2:2015 Information technology. UPnP Device Architecture. Remote User Interface Device Control Protocol. Remote User Interface Server Device
  • BS ISO/IEC 29341-12-10:2015 Information technology. UPnP Device Architecture. Remote User Interface Device Control Protocol. Remote User Interface Client Service
  • BS ISO/IEC 29341-12-11:2015 Information technology. UPnP Device Architecture. Remote User Interface Device Control Protocol. Remote User Interface Server Service
  • BS ISO/IEC 29500-3:2015 Information technology. Document description and processing languages. Office Open XML File Formats. Markup Compatibility and Extensibility
    Supersedes BS ISO/IEC 29500 PARTS 1-4:2012 which remains current
  • BS ISO/IEC 33004:2015 Information technology. Process assessment. Requirements for process reference, process assessment and maturity models
    Supersedes BS ISO/IEC 15504-2:2003 and PD ISO/IEC TR 15504-7:2008
  • BS IEC 60076-15:2015 Power transformers. Gas-filled power transformers
  • BS IEC 60317-4:2015 Specifications for particular types of winding wires. Solderable polyurethane enamelled round copper wire, class 130
    Supersedes BS EN 60317-4:1995
  • BS IEC 61892-1:2015 Mobile and fixed offshore units. Electrical installations. General requirements and conditions
    Supersedes BS IEC 61892-1:2010
  • BS IEC/IEEE 62582-5:2015 Nuclear power plants. Instrumentation and control important to safety. Electrical equipment condition monitoring methods. Optical time domain reflectometry
  • BS IEC 62894:2014 Photovoltaic inverters. Data sheet and name plate
  • BS IEC 62906-1-2:2015 Laser display devices. Vocabulary and letter symbols

 

Published documents

  • PD CEN/TS 54-32:2015 Fire detection and fire alarm systems. Planning, design, installation, commissioning, use and maintenance of voice alarm systems
  • PD ISO/TR 79:2015 Reference materials. Examples of reference materials for qualitative properties
  • PD ISO/TR 9212:2015 Hydrometry. Methods of measurement of bedload discharge
    Supersedes PD ISO/TR 9212:2006
  • PD ISO/TS 11999-2:2015 PPE for firefighters. Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures. Compatibility
  • PD CEN ISO/TS 12025:2015 Nanomaterials. Quantification of nano-object release from powders by generation of aerosols
  • PD ISO/TR 12349-1:2015 Road vehicles. Dummies for restraint system testing. Adult dummies
  • PD ISO/TR 12349-2:2015 Road vehicles. Dummies for restraint system testing. Child dummies
  • PD CEN/TR 13387-1:2015 Child use and care articles. General safety guidelines. Safety philosophy and safety assessment
    Together with PD CEN/TR 13387-2:2015, PD CEN/TR 13387-3:2015, PD CEN/TR 13387-4:2015 and PD CEN/TR 13387-5:2015, it supersedes PD CEN/TR 13387:2004, which is withdrawn
  • PD CEN/TR 13387-2:2015 Child use and care articles. General safety guidelines. Chemical hazards
    Together with PD CEN/TR 13387-1:2015, PD CEN/TR 13387-3:2015, PD CEN/TR 13387-4:2015 and PD CEN/TR 13387-5:2015, it supersedes PD CEN/TR 13387:2004, which is withdrawn
  • PD CEN/TR 13387-3:2015 Child use and care articles. General safety guidelines. Mechanical hazards
    Together with PD CEN/TR 13387-1:2015, PD CEN/TR 13387-2:2015, PD CEN/TR 13387-4:2015 and PD CEN/TR 13387-5:2015, it supersedes PD CEN/TR 13387:2004, which is withdrawn
  • PD CEN/TR 13387-4:2015 Child use and care articles. General safety guidelines. Thermal hazards
    Together with PD CEN/TR 13387-1:2015, PD CEN/TR 13387-2:2015, PD CEN/TR 13387-3:2015 and PD CEN/TR 13387-5:2015, it supersedes PD CEN/TR 13387:2004, which is withdrawn
  • PD CEN/TR 13387-5:2015 Child use and care articles. General safety guidelines. Product information
    Together with PD CEN/TR 13387-1:2015, PD CEN/TR 13387-2:2015, PD CEN/TR 13387-3:2015 and PD CEN/TR 13387-4:2015, it supersedes PD CEN/TR 13387:2004, which is withdrawn
  • PD ISO/TS 15926-11:2015 Industrial automation systems and integration. Integration of life-cycle data for process plants including oil and gas production facilities. Methodology for simplified industrial usage of reference data
  • PD ISO/IEC TR 15944-6:2015 Information technology. Business Operational View. Technical introduction to e-Business modelling
    Supersedes PD ISO/IEC TR 15944-6:2009
  • PD CEN/TS 16835-1:2015 Molecular in vitro diagnostic examinations. Specifications for pre-examination processes for venous whole blood. Isolated cellular RNA
  • PD ISO/TR 16840-9:2015 Wheelchair seating. Clinical interface pressure mapping guidelines for seating
  • PD CEN/TS 16861:2015 Plastics. Recycled plastics. Determination of selected marker compounds in food grade recycled polyethylene terephthalate (PET)
  • PD CEN/TR 16862:2015 Plastics welding supervisor. Task, responsibilities, knowledge, skills and competence
  • PD CEN ISO/TS 17728:2015 Microbiology of the food chain. Sampling techniques for microbiological analysis of food and feed samples
  • PD CEN ISO/TS 17969:2015 Petroleum, petrochemical and natural gas industries. Guidelines on competency for personnel
  • PD ISO/TS 18090-1:2015 Radiological protection. Characteristics of reference pulsed radiation. Photon radiation
  • PD ISO/TR 18159:2015 Document management. Environmental and work place safety regulations affecting microfilm processors
  • PD ISO/TS 18507:2015 Surface chemical analysis. Use of Total Reflection X-ray Fluorescence spectroscopy in biological and environmental analysis
  • PD ISO/IEC TS 18661-2 June:2015 Information Technology. Programming languages, their environments, and system software interfaces. Floating-point extensions for C. Decimal floating-point arithmetic
    Supersedes PD ISO/IEC TS 18661-2 February:2015
  • PD ISO/IEC TS 18822:2015 Programming languages. C++. File System Technical Specification
  • PD ISO/IEC TR 19075-2:2015 Information technology. Database languages. SQL Technical Reports. SQL Support for Time-Related Information
  • PD ISO/IEC TR 19075-3:2015 Information technology. Database languages. SQL Technical Reports. SQL Embedded in Programs using the JavaTM programming language
  • PD ISO/IEC TR 19075-4:2015 Information technology. Database languages. SQL Technical Reports. SQL with Routines and types using the JavaTM programming language
  • PD ISO/IEC TS 19570:2015 Programming Languages. Technical Specification for C++ Extensions for Parallelism
  • PD ISO/TR 20183:2015 Sports and other recreational facilities and equipment. Injury and safety definitions and thresholds. Guidelines for their inclusion in standards
  • PD ISO/IEC TR 27023:2015 Information technology. Security techniques. Mapping the revised editions of ISO/IEC 27001 and ISO/IEC 27002
  • PD ISO/IEC TR 29189:2015 Information technology. Biometrics. Evaluation of examiner assisted biometric applications
  • PD CLC/TR 50174-99-1:2015 Information technology. Cabling installation. Remote powering
  • PD CLC/TS 50238-2:2015 Railway applications. Compatibility between rolling stock and train detection systems. Compatibility with track circuits
    Supersedes DD CLC/TS 50238-2:2010
  • PD IEC/TS 60079-39:2015 Explosive atmospheres. Intrinsically safe systems with electronically controlled spark duration limitation
  • PD IEC/TS 60871-3:2015 Shunt capacitors for AC power systems having a rated voltage above 1000 V. Protection of shunt capacitors and shunt capacitor banks
  • PD IEC/TR 61641:2014 Enclosed low-voltage switchgear and controlgear assemblies. Guide for testing under conditions of arcing due to internal fault
  • PD IEC/PAS 61850-9-3:2015 Communication networks and systems for power utility automation. Precision time protocol profile for power utility automation
  • PD IEC/TR 61850-90-12:2015 Communication networks and systems for power utility automation. Wide area network engineering guidelines
  • PD IEC/TR 62343-6-9:2015 Dynamic modules. Design guide. Study of mechanisms and measurements of crosstalk in wavelength-selective switches
  • PD IEC/TR 62357-200:2015 Power systems management and associated information exchange. Guidelines for migration from Internet Protocol version 4 (IPv4) to Internet Protocol version 6 (IPv6)
  • PD IEC/TR 62443-2-3:2015 Security for industrial automation and control systems. Patch management in the IACS environment
  • PD IEC/TS 62600-101:2015 Marine energy. Wave, tidal and other water current converters. Wave energy resource assessment and characterization
  • PD IEC/TR 62757:2015 Fire prevention measures on converters for high-voltage direct current (HVDC) systems, static var compensators (SVC) and flexible ac transmission systems (FACTS) and their valve halls
  • PD IEC/TS 62835:2015 Electric toasters for household and similar use. Methods and measurements for improving accessibility

Publicly Available Specifications

Publicly Available Specifications are issued to provide an interim document where there is a market need but where a full standard has yet to be published.

  • PAS 1365:2015 Code of practice for the recognition of dementia-friendly communities in England
  • PAS 54115:2015 Vaping products, including electronic cigarettes, e-liquids, e-shisha and directly-related products. Manufacture, importation, testing and labelling. Guide

Corrigenda to British standards and updated British standards

Most British amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is re-issued as a new edition. All amendments to date of despatch are included within any main publication when ordered for the first time. The following amended standards and corrigenda to British standards were made available last month.

  • BS 6375-1:2015 Performance of windows and doors. Classification for weathertightness and guidance on selection and specification
    CORRIGENDUM 1
  • BS 7910:2013+A1:2015 Guide to methods for assessing the acceptability of flaws in metallic structures
    AMENDMENT 1
  • BS 7971-10:2014 Protective clothing and equipment for use in violent situations and in training. Coveralls. Requirements and test methods
    CORRIGENDUM 1
  • BS EN 81-72:2015 Safety rules for the construction and installation of lifts. Particular applications for passenger and goods passenger lifts. Firefighters lifts
    CORRIGENDUM 1
  • BS EN 747-1:2012+A1:2015 Furniture. Bunk beds and high beds. Safety, strength and durability requirements
    AMENDMENT 1
  • BS EN 747-2:2012+A1:2015 Furniture. Bunk beds and high beds. Test methods
    AMENDMENT 1
  • BS EN 772-1:2011+A1:2015 Methods of test for masonry units. Determination of compressive strength
    AMENDMENT 1
  • BS EN 997:2012+A1:2015 WC pans and WC suites with integral trap
    AMENDMENT 1
  • BS EN 1436:2007+A1:2008 Road marking materials. Road marking performance for road users
    CORRIGENDUM 1
  • BS EN 1459-3:2015 Rough-terrain trucks. Safety requirements and verification. Interface between the variablereach truck and the work platform
    CORRIGENDUM 1
  • BS EN 1536:2010+A1:2015 Execution of special geotechnical work. Bored piles
    AMENDMENT 1
  • BS EN 1538:2010+A1:2015 Execution of special geotechnical works. Diaphragm walls
    AMENDMENT 1
  • BS EN 1992-1-1:2004+A1:2014 Eurocode 2. Design of concrete structures. General rules and rules for buildings
    AMENDMENT 1
  • BS EN 1993-1-1:2005+A1:2014 Eurocode 3. Design of steel structures. General rules and rules for buildings
    AMENDMENT 1
  • BS EN ISO 9698:2015 Water quality. Determination of tritium activity concentration. Liquid scintillation counting method
    CORRIGENDUM 1
  • BS EN ISO 10140-3:2010+A1:2015 Acoustics. Laboratory measurement of sound insulation of building elements. Measurement of impact sound insulation
    AMENDMENT 1
  • BS EN ISO 12404:2015 Soil quality. Guidance on the selection and application of screening methods
    CORRIGENDUM 1
  • BS EN 12493:2013+A1:2014 LPG equipment and accessories. Welded steel pressure vessels for LPG road tankers. Design and manufacture
    CORRIGENDUM 1
  • BS EN ISO 13196:2015 Soil quality. Screening soils for selected elements by energy-dispersive X-ray fluorescence spectrometry using a handheld or portable instrument
    CORRIGENDUM 1
  • BS EN 13240:2001+A2:2004 Roomheaters fired by solid fuel. Requirements and test methods
    CORRIGENDUM 4
  • BS EN ISO 13341:2010+A1:2015 Gas cylinders. Fitting of valves to gas cylinders
    AMENDMENT 1
  • BS EN 14055:2010+A1:2015 WC and urinal flushing cisterns
    AMENDMENT 1
  • BS EN 14388:2005 Road traffic noise reducing devices. Specifications
    CORRIGENDUM 2
  • BS EN 15502-1:2012+A1:2015 Gas-fired heating boilers. General requirements and tests
    AMENDMENT 1
  • BS EN 16307-1:2013+A1:2015 Industrial trucks. Safety requirements and verification. Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks
    AMENDMENT 1
  • BS EN ISO 22794:2009 Dentistry. Implantable materials for bone filling and augmentation in oral and maxillofacial surgery. Contents of a technical file
    CORRIGENDUM 1
  • BS EN ISO 25457:2008 Petroleum, petrochemical and natural gas industries. Flare details for general refinery and petrochemical service
    CORRIGENDUM 1
  • BS EN 50160:2010+A1:2015 Voltage characteristics of electricity supplied by public electricity networks
    AMENDMENT 1
  • BS EN 55015:2013+A1:2015 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
    AMENDMENT 1
  • BS EN 55024:2010+A1:2015 Information technology equipment. Immunity characteristics. Limits and methods of measurement
    AMENDMENT 1
  • BS EN 60079-19:2011+A1:2015 Explosive atmospheres. Equipment repair, overhaul and reclamation
    AMENDMENT 1
  • BS EN 60115-1:2011+A11:2015 Fixed resistors for use in electronic equipment. Generic specification
    AMENDMENT 1
  • BS EN 60335-2-5:2015 Household and similar electrical appliances. Safety. Particular requirements for indishwashers
    CORRIGENDUM 1
  • BS EN 60335-2-95:2015+A1:2015 Household and similar electrical appliances. Safety. Particular requirements for drives for vertically moving garage doors for residential use
    AMENDMENT 1
  • BS EN 60350-2:2013 Household electric cooking appliances. Hobs. Methods for measuring performance
    CORRIGENDUM 1
  • BS EN 60601-1-6:2010+A1:2015 Medical electrical equipment. General requirements for basic safety and essential performance. Collateral standard. Usability
    AMENDMENT 1
  • BS EN 60601-1-10:2008+A1:2015 Medical electrical equipment. General requirements for basic safety and essential performance. Collateral Standard: Requirements for the development of physiologic closed-loop controllers
    AMENDMENT 1
  • BS EN 60601-2-33:2010+A1:2015 Medical electrical equipment. Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis
    AMENDMENT 1
  • BS EN 60601-2-41:2009+A1:2015 Medical electrical equipment. Particular requirements for basic safety and essential performance of surgical luminaires and luminaires for diagnosis
    AMENDMENT 1
  • BS EN 60601-2-52:2010+A1:2015 Medical electrical equipment. Particular requirements for basic safety and essential performance of medical beds
    AMENDMENT 1
  • BS EN 60601-2-54:2009+A1:2015 Medical electrical equipment. Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
    AMENDMENT 1
  • BS EN 60630:1998+A7:2015 Maximum lamp outliners for incandescent lamps
    AMENDMENT 7
  • BS EN 60704-2-5:2005+A1:2015 Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. Particular requirements for electric thermal storage room heaters
    AMENDMENT 1
  • BS EN 60728-7-1:2005+A1:2015 Cable networks for television signals, sound signals and interactive services. Hybrid Fibre Coax Outside Plant Status Monitoring. Physical (PHY) Layer Specification
    AMENDMENT 1
  • BS EN 61207-7:2013 Expression of performance of gas analyzers. Tuneable semiconductor laser gas analyzers
    CORRIGENDUM 1
  • BS EN 61300-2-28:2013 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Corrosive atmosphere (sulphur dioxide)
    CORRIGENDUM 1
  • BS EN 61340-4-1:2004+A1:2015 Electrostatics. Standard test methods for specific applications. Electrical resistance of floor coverings and installed floors
    AMENDMENT 1
  • BS EN 61496-1:2013 Safety of machinery. Electro-sensitive protective equipment. General requirements and tests
    CORRIGENDUM 1
  • BS EN 61591:1997+A12:2015 Household range hoods and other cooking fume extractors. Methods for measuring performance
    AMENDMENT 12
  • BS EN 62271-200:2012 High-voltage switchgear and controlgear. AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
    CORRIGENDUM 1
  • BS EN 62271-202:2014 High-voltage switchgear and controlgear. Highvoltage/ low-voltage prefabricated substation
    CORRIGENDUM 2
  • BS EN 62368-1:2014 Audio/video, information and communication technology equipment. Safety requirements
    CORRIGENDUM 3
  • BS EN 62439-7:2012 Industrial communication networks. High availability automation networks. Ring-based Redundancy Protocol (RRP)
    CORRIGENDUM 1
  • BS EN 62560:2012+A1:2015 Self-ballasted LED-lamps for general lighting services by voltage > 50 V. Safety specifications
    AMENDMENT 1
  • BS EN 62676-4:2015 Video surveillance systems for use in security applications. Application guidelines
    CORRIGENDUM 1
  • BS EN 80601-2-30:2010+A1:2015 Medical electrical equipment. Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers
    AMENDMENT 1
  • BS ISO 10537:2010+A1:2015 Space data and information transfer systems. Encapsulation service
    AMENDMENT 1
  • BS ISO 10816-6:1995+A1:2015 Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Reciprocating machines with power ratings above 100 kW
    AMENDMENT 1
  • PD CEN ISO/TS 12025:2015 Nanomaterials. Quantification of nano-object release from powders by generation of aerosols
    CORRIGENDUM 1
  • BS ISO/IEC 15444-12:2012+A3:2015 Information technology. JPEG 2000 image coding system. ISO base media file format
    CORRIGENDUM 1
  • BS ISO/IEC 15693-3:2009+A3:2015 Identification cards. Contactless integrated circuit cards. Vicinity cards. Anticollision and transmission protocol
    AMENDMENT 3
  • BS ISO/IEC 19794-1:2011+A2:2015 Information technology. Biometric data interchange formats. Framework
    AMENDMENT 2
  • BS ISO/IEC 19795-2:2007+A1:2015 Information technology. Biometric performance testing and reporting. Testing methodologies for technology and scenario evaluation
    AMENDMENT 1
  • BS ISO 22664:2013+A1:2015 Space data and information transfer systems. TC (telecommand) space data link protocol
    AMENDMENT 1
  • BS ISO/IEC 23009-1:2014 Information technology. Dynamic adaptive streaming over HTTP (DASH). Media presentation description and segment formats
    CORRIGENDUM 1
  • BS ISO 24394:2008+A1:2012 Welding for aerospace applications. Qualification test for welders and welding operators. Fusion welding of metallic components
    CORRIGENDUM 1
  • PD CEN ISO/TS 27687:2009 Nanotechnologies. Terminology and definitions for nano-objects. Nanoparticle, nanofibre and nanoplate
    CORRIGENDUM 1
  • PD IEC/TR 60919-2:2008+A1:2015 Performance of high-voltage direct current (HVDC) systems with line-commutated converters. Faults and switching
    AMENDMENT 1
  • BS 2SP 101-104:1956+A3:2015 Specifications for turnbarrels, tension rods and swaged cable-end connections (Unified threads),* cadmium plated, for aircraft
    AMENDMENT 3
  • BS 4T 45:1972+A2:2015 Specification for carbon manganese steel tube (700 MPa) (Tube 12.5 mm outside diameter and greater) (Weldable)
    AMENDMENT 2
  • BS SP 22-27:1950+A3:2015 Specification for B.A. Washers. For aircraft purposes (primarily for instrument use)
    AMENDMENT 3
  • NA+A1+A2:2014 to BS EN 1993-1-1:2005+A1:2014 UK National Annex to Eurocode 3. Design of steel structures. General rules and rules for buildings
    AMENDMENT 1
    AMENDMENT 2

British standards withdrawn

  • BS 1016-111:1998 (ISO 12900:1998) Methods for analysis and testing of coal and coke. Determination of abrasion index of coal
    Superseded by BS ISO 12900:2015
  • BS 2488:1966 Schedule of preferred numbers for the resistance of resistors and the capacitance of capacitors for telecommunication equipment
    Superseded by BS EN 60063:2015
  • BS 5550-7.4.1:1990 (ISO 2969:1987) Cinematography. Production and presentation. Sound. Specifications and measurements for the B-chain electro-acoustic response of motion picture control rooms and indoor theatres
    Superseded by BS ISO 2969:2015
  • BS 5766-5:1999 (ISO 6495:1999) Methods for analysis of animal feeding stuffs. Determination of water-soluble chlorides content
    Superseded by BS ISO 6495-1:2015
  • BS 6057-3.19:1986 (ISO 4655:1985) Rubber latices. Methods of test. Determination of total bound styrene content of reinforced styrene-butadiene rubber lattices
    This standard is withdrawn due to the withdrawal of the corresponding ISO 4655:1985
  • BS 6057-3.23:1990 (ISO 9252:1989) Rubber latices. Methods of test. Microbiological examination of synthetic rubber latex
    This standard is withdrawn due to the withdrawal of the corresponding ISO 9252:1989
  • BS 6404-8.1:2001 (IEC 60404-8-1:2001) Magnetic materials. Individual materials. Magnetically hard materials
    Superseded by BS EN 60404-8-1:2015
  • BS 7135-2:1989 (EN 29295:1991, ISO 9295:1988) Noise emitted by computer and business equipment. Method of measurement of high frequency noise
    Superseded by BS EN ISO 9295:2015
  • BS 7455-1:1991 (ISO 7530-1:1990) Analysis of nickel alloys by flame atomic absorption spectrometry. General requirements and sample dissolution
    Superseded by BS ISO 7530-1:2015
  • BS 7455-2:1991 (ISO 7530-2:1990) Analysis of nickel alloys by flame atomic absorption spectrometry. Method for the determination of cobalt
    Superseded by BS ISO 7530-1:2015
  • BS 7455-3:1991 (ISO 7530-3:1990) Analysis of nickel alloys by flame atomic absorption spectrometry. Method for the determination of chromium
    Superseded by BS ISO 7530-1:2015
  • BS 7455-4:1991 (ISO 7530-4:1990) Analysis of nickel alloys by flame atomic absorption spectrometry. Method for the determination of copper
    Superseded by BS ISO 7530-1:2015
  • BS 7455-5:1991 (ISO 7530-5:1990) Analysis of nickel alloys by flame atomic absorption spectrometry. Method for the determination of iron
    Superseded by BS ISO 7530-1:2015
  • BS 7455-6:1991 (ISO 7530-6:1990) Analysis of nickel alloys by flame atomic absorption spectrometry. Method for the determination of manganese
    Superseded by BS ISO 7530-1:2015
  • BS 7832:1995 (ISO 9699:1994) Performance standards in building. Checklist for briefing. Contents of brief for building design
    This standard is withdrawn without replacement as it conflicts with BS 8536:2010, which is about to be Superseded
  • BS 8495:2007 Code of practice for digital CCTV recording systems for the purpose of image export to be used as evidence
    Superseded by BS EN 62676-4:2015
  • BS 8536:2010 Facility management briefing. Code of practice
    Superseded by BS 8536-1:2015
  • PD CEN/TR 13387:2004 Child use and care articles. Safety guidelines
    Superseded by PD CEN/TR 13387-1:2015, PD CEN/TR 13387-2:2015, PD CEN/TR 13387-3:2015, PD CEN/TR 13387-4:2015 and PD CEN/TR 13387-5:2015
  • BS EN 124:1994 Gully tops and manhole tops for vehicular and pedestrian areas. Design requirements, type testing, marking, quality control
    Superseded by BS EN 124-1:2015, BS EN 124-2:2015, BS EN 124-3:2015, BS EN 124-4:2015, BS EN 124-5:2015 and BS EN 124-6:2015
  • BS EN 1160:1997 Installations and equipment for liquefied natural gas. General characteristics of liquefied natural gas
    Superseded by BS EN ISO 16903:2015
  • BS EN ISO 5508:1995 (BS 684-2.35:1990) Animal and vegetable fats and oils. Analysis by gas chromatography of methyl esters of fatty acids
    Superseded by BS EN ISO 12966-1:2014 and BS EN ISO 12966-4:2015
  • BS EN ISO 15304:2002 Animal and vegetable fats and oils. Determination of the content of trans fatty acid isomers of vegetable fats and oil. Gas chromatographic method
    Superseded by BS EN ISO 12966-1:2014 and BS EN ISO 12966-4:2015
  • BS EN ISO/IEC 17021:2011 Conformity assessment. Requirements for bodies providing audit and certification of management systems
    Superseded by BS EN ISO/IEC 17021-1:2015
  • BS EN 61029-2-1:2010 Safety of transportable motor-operated electric tools. Particular requirements for circular saw benches
    Superseded by BS EN 61029-2-1:2012
  • BS EN 61029-2-9:2009 Safety of transportable motor-operated electric tools. Particular requirements for mitre saws
    Superseded by BS EN 61029-2-9:2012
  • BS EN 61029-2-11:2009 Safety of transportable motor-operated electric tools. Particular requirements for combined mitre and bench saws
    Superseded by BS EN 61029-2-11:2012
  • DD CEN/TS 15436-3:2009 Road service area maintenance equipment. Classification
    Superseded by BS EN 15436-3:2015
  • DD CEN/TS 16187:2011 Foodstuffs. Determination of fumonisin B1 and fumonisin B2 in processed maize containing foods for infants and young children. HPLC method with immunoaffinity column cleanup and fluorescence detection after precolumn derivatization
    Superseded by BS EN 16187:2015
  • BS EN 60099-1:1994 Surge arresters. Non-linear resistor type gapped surge arrestors for a.c. systems
    This standard is withdrawn following the withdrawal of the corresponding European and International standard
  • BS EN 60317-4:1995 Specifications for particular types of winding wires. Solderable polyurethane enamelled round copper wire, class 130
    This standard has been withdrawn in line with CENELEC’s withdrawal of the base European text. Please note that the latest edition of the IEC standard is being published as BS IEC 60317-4:2015
  • BS EN 60626-3:2008 Combined flexible materials for electrical insulation. Specifications for individual materials
    Superseded by BS EN 60626-3:2008+A1:2012
  • BS EN 60947-4-1:2010 Low-voltage switchgear and controlgear. Contactors and motor-starters. Electromechanical contactors and motor-starters
    Superseded by BS EN 60947-4-1:2010+A1:2012
  • BS EN 61326-1:2006 Electrical equipment for measurement, control and laboratory use. EMC requirements. General requirements
    Superseded by BS EN 61326-1:2013
  • BS EN 61326-2-3:2006 Electrical equipment for measurement, control and laboratory use. EMC requirements. Particular requirements. Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning
    Superseded by BS EN 61326-2-3:2013
  • BS EN 61326-2-4:2006 Electrical equipment for measurement, control and laboratory use. EMC requirements. Particular requirements. Test configurations, operational conditions and performance criteria for insulation monitoring devices, according to IEC 61557-8 and for equipment
    Superseded by BS EN 61326-2-4:2013
  • BS ISO/IEC 15504-2:2003 Software engineering. Process assessment. Performing an assessment
    Superseded by BS ISO/IEC 33002:2015, BS ISO/IEC 33003:2015, BS ISO/IEC 33004:2015 and BS ISO/IEC 33020:2015
  • DD ISO/TS 16610-41:2006 Geometrical product specifications (GPS). Filtration. Morphological profile filters. Disk and horizontal line-segment filters
    Superseded by BS EN ISO 16610-41:2015
  • DD ISO/TS 16649-3:2005 Microbiology of food and animal feeding stuffs. Horizontal method for the enumeration of Β-glucuronidase positive Escherichia coli. Most probable number technique using 5-bromo-4-chloro-3-indoyl-β-D-glucuronide
    Superseded by BS EN ISO 16649-3:2015
  • BS ISO/IEC 23026:2006 Software engineering. Recommended practice for the internet. Web site engineering, web site management, and web site life cycle
    Superseded by BS ISO/IEC/IEEE 23026:2015
  • BS ISO/IEC 26300:2006+A1:2012 Information technology. Open Document Format for Office Applications (OpenDocument) v1. 0
    Superseded by BS ISO/IEC 26300-1:2015, BS ISO/IEC 26300-2:2015 and BS ISO/IEC 26300-3:2015
  • BS ISO 28279:2010 Sintered metal materials. Determination of the level of cleanliness of powder-metallurgy parts
    This standard is withdrawn as it is no longer used
  • DD ISO/TS 16610-22:2006 Geometrical product specifications (GPS). Filtration. Linear profile filters. Spline filters
    Superseded by BS EN ISO 16610-22:2015
  • DD CLC/TS 50238-2:2010 Railway applications. Compatibility between rolling stock and train detection systems. Compatibility with track circuits
    Superseded by PD CLC/TS 50238-2:2015
  • DD IEC/TS 62657-2:2011 Industrial communication Networks. Wireless communication network. Coexistence management
    Superseded by BS EN 62657-2:2015
  • PD IEC/TS 62796:2013 Energy efficiency in electroheating installations
    Superseded by BS EN 60398:2015
  • BS M 64:1987 (ISO 8177:1986) Specification for dimensions of omega clamps (saddle clamps) for fluid tubing installations
    Superseded by BS ISO 8177:2015

Published in international.